APRISAXE-MIB-4RF Table View

This table stores the currently active alarms. Up to 500
separate alarms will be stored in the table.

aprisaXEAlarmEntry row .1.3.6.1.4.1.14817.7.3.1.2.26.1

The table entry index specification, just the alarm index.

Indexes

aprisaXEAlarmIndex

Column	Syntax	OID
aprisaXEAlarmIndex The index into the alarm table.	Integer32 Constraints: range: 0-500	.1.3.6.1.4.1.14817.7.3.1.2.26.1.1
aprisaXEAlarmSlot The number of the slot generating the alarm.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.26.1.2
aprisaXEAlarmSource The source of the alarm, a card type or external.	APRISAXE-TC-4RFAprisaXEAlarmSource Type Values: 0 none 1 modem 2 transmitter 3 receiver 4 quadJET 5 quadFourWire 6 dualFxo 7 dualFxs 8 quadV24 9 highSpeedSync 10 psc 11 pic 12 dualJET 13 singleJET 50 external1 51 external2 60 remote 70 user1 71 user2 100 system 101 swUpgrade Description: This is used to identify the source of an alarm.	.1.3.6.1.4.1.14817.7.3.1.2.26.1.3
aprisaXEAlarmPort The source port of the alarm.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.26.1.4
aprisaXEAlarmSeverity The severity of the alarm.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.26.1.5
aprisaXEAlarmType The type of the alarm.	APRISAXE-TC-4RFAprisaXEAlarmType Type Values: 0 none 1 txADCChZeroHi 2 txADCChZeroLo 3 txADCChOneHi 4 txADCChOneLo 5 txADCChTwoHi 6 txADCChTwoLo 7 txADCChThreeHi 8 txADCChThreeLo 9 txADCChFourHi 10 txADCChFourLo 11 txADCChFiveHi 12 txADCChFiveLo 13 txADCChSixHi 14 txADCChSixLo 15 txADCChSevenHi 16 txADCChSevenLo 17 txADCChEightHi 18 txADCChEightLo 19 txADCChNineHi 20 txADCCNineLo 21 txADCChTenHi 22 txADCChTenLo 23 txADCChElevenHi 24 txADCChElevenLo 25 txSynthLD 26 tx5VFail 27 tx11VFail 28 tx28VFail 29 txEEFail 30 txTSensorFail 31 txReturnLoss 32 txAmplifierBalance 33 txMibFail 50 rxADCChZeroHi 51 rxADCChZeroLo 52 rxADCChOneHi 53 rxADCChOneLo 54 rxADCChTwoHi 55 rxADCChTwoLo 56 rxADCChThreeHi 57 rxADCChThreeLo 58 rxADCChFourHi 59 rxADCChFourLo 60 rxADCChFiveHi 61 rxADCChFiveLo 62 rxADCChSixHi 63 rxADCChSixLo 64 rxADCChSevenHi 65 rxADCChSevenLo 66 rxADCChEightHi 67 rxADCChEightLo 68 rxADCChNineHi 69 rxADCCNineLo 70 rxADCChTenHi 71 rxADCChTenLo 72 rxRSSIHi 73 rxRSSILo 74 rx12VFail 75 rxSynthLD 76 rxEEFail 77 rxOff 78 rxMibFail 100 mdLOS 101 mdLink 102 mdStatus 103 mdDemodAlignmentLost 104 mdTdmAlignmentLost 105 mdRefAFail 106 mdRefBFail 107 mdClkSyncFail 108 mdNetClkConfig 109 mdUCEPresent 110 mdInitFail 120 mdEEFail 150 muxId 151 muxInit 152 muxStat 153 muxClk 154 muxMibEEFail 155 muxCharEEFail 200 e1LOF 201 e1AIS 202 e1RAI 203 e1RMAI 204 e1TS16AIS 205 e1TS16LOS 206 e1LOS 207 e1CRC4 220 t1LOF 221 t1AIS 222 t1RAI 226 t1LOS 227 t1CRC6 250 mbHwHsc 251 mbFan1Fail 252 mbFan2Fail 253 mbInvalidConfig 254 mbCardMismatch 255 mbEEFail 300 ccDataFail 301 ccNoBandwidth 325 mhsbSwitchToStandby 350 externalAlarm1 351 externalAlarm2 352 externalOutputAlarm1 353 externalOutputAlarm2 354 externalOutputAlarm3 355 externalOutputAlarm4 400 remoteMajorAlarm 401 remoteMinorAlarm 402 fxoCodecOvld 403 fxoBillToneOvld 404 fxoUnplug 405 fxoCurrentOvld 406 fxsCalibError 407 fxsDCDCError 408 fxsCASLock 500 hssTdmLock 501 hss32MhzReset 502 hssTdmReset 503 hssLoss 504 hssRxFifoFull 505 hssRxFifoEmpty 506 hssTxFifoFull 507 hssTxFifoEmpty 508 hssRxClockInvalid 509 hssTxClockInvalid 525 v24CtrlLineLoss 550 altImageTableUsed 551 defaultImageTableUsed 552 uploadFail 575 pscDemuxAlignmentLost 576 pscTDMAlignmentLost 577 pscMuxAlignmentError 578 pscCompanionTxFail 579 pscSoftwareOverride 580 pscInvalidSwitchValue 600 hsdParamMismatch 601 hsdCompanionLost 602 hsdPMTxFreq 603 hsdPMRxFreq 604 hsdPMTermModState 605 hsdPMTermRfChWidth 606 hsdPMTxPower 607 hsdPMModemIntlvEna 608 lastAlarm Description: The type of an alarm.	.1.3.6.1.4.1.14817.7.3.1.2.26.1.6
aprisaXEAlarmTime The time that the alarm occurred.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14817.7.3.1.2.26.1.7

This table stores a history of the alarms as they become
active and cleared.

aprisaXEAlarmHistoryEntry row .1.3.6.1.4.1.14817.7.3.1.2.31.1

The table entry index specification, just the alarm index.

Indexes

aprisaXEAlarmHistoryIndex

Column	Syntax	OID
aprisaXEAlarmHistoryIndex The index into the alarm history table.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.14817.7.3.1.2.31.1.1
aprisaXEAlarmHistorySlot The number of the slot generating the alarm.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.31.1.2
aprisaXEAlarmHistorySource The source of the alarm, a card type or external.	APRISAXE-TC-4RFAprisaXEAlarmSource Type Values: 0 none 1 modem 2 transmitter 3 receiver 4 quadJET 5 quadFourWire 6 dualFxo 7 dualFxs 8 quadV24 9 highSpeedSync 10 psc 11 pic 12 dualJET 13 singleJET 50 external1 51 external2 60 remote 70 user1 71 user2 100 system 101 swUpgrade Description: This is used to identify the source of an alarm.	.1.3.6.1.4.1.14817.7.3.1.2.31.1.3
aprisaXEAlarmHistoryPort The source port of the alarm.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.31.1.4
aprisaXEAlarmHistorySeverity The severity of the alarm.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.31.1.5
aprisaXEAlarmHistoryType The type of the alarm.	APRISAXE-TC-4RFAprisaXEAlarmType Type Values: 0 none 1 txADCChZeroHi 2 txADCChZeroLo 3 txADCChOneHi 4 txADCChOneLo 5 txADCChTwoHi 6 txADCChTwoLo 7 txADCChThreeHi 8 txADCChThreeLo 9 txADCChFourHi 10 txADCChFourLo 11 txADCChFiveHi 12 txADCChFiveLo 13 txADCChSixHi 14 txADCChSixLo 15 txADCChSevenHi 16 txADCChSevenLo 17 txADCChEightHi 18 txADCChEightLo 19 txADCChNineHi 20 txADCCNineLo 21 txADCChTenHi 22 txADCChTenLo 23 txADCChElevenHi 24 txADCChElevenLo 25 txSynthLD 26 tx5VFail 27 tx11VFail 28 tx28VFail 29 txEEFail 30 txTSensorFail 31 txReturnLoss 32 txAmplifierBalance 33 txMibFail 50 rxADCChZeroHi 51 rxADCChZeroLo 52 rxADCChOneHi 53 rxADCChOneLo 54 rxADCChTwoHi 55 rxADCChTwoLo 56 rxADCChThreeHi 57 rxADCChThreeLo 58 rxADCChFourHi 59 rxADCChFourLo 60 rxADCChFiveHi 61 rxADCChFiveLo 62 rxADCChSixHi 63 rxADCChSixLo 64 rxADCChSevenHi 65 rxADCChSevenLo 66 rxADCChEightHi 67 rxADCChEightLo 68 rxADCChNineHi 69 rxADCCNineLo 70 rxADCChTenHi 71 rxADCChTenLo 72 rxRSSIHi 73 rxRSSILo 74 rx12VFail 75 rxSynthLD 76 rxEEFail 77 rxOff 78 rxMibFail 100 mdLOS 101 mdLink 102 mdStatus 103 mdDemodAlignmentLost 104 mdTdmAlignmentLost 105 mdRefAFail 106 mdRefBFail 107 mdClkSyncFail 108 mdNetClkConfig 109 mdUCEPresent 110 mdInitFail 120 mdEEFail 150 muxId 151 muxInit 152 muxStat 153 muxClk 154 muxMibEEFail 155 muxCharEEFail 200 e1LOF 201 e1AIS 202 e1RAI 203 e1RMAI 204 e1TS16AIS 205 e1TS16LOS 206 e1LOS 207 e1CRC4 220 t1LOF 221 t1AIS 222 t1RAI 226 t1LOS 227 t1CRC6 250 mbHwHsc 251 mbFan1Fail 252 mbFan2Fail 253 mbInvalidConfig 254 mbCardMismatch 255 mbEEFail 300 ccDataFail 301 ccNoBandwidth 325 mhsbSwitchToStandby 350 externalAlarm1 351 externalAlarm2 352 externalOutputAlarm1 353 externalOutputAlarm2 354 externalOutputAlarm3 355 externalOutputAlarm4 400 remoteMajorAlarm 401 remoteMinorAlarm 402 fxoCodecOvld 403 fxoBillToneOvld 404 fxoUnplug 405 fxoCurrentOvld 406 fxsCalibError 407 fxsDCDCError 408 fxsCASLock 500 hssTdmLock 501 hss32MhzReset 502 hssTdmReset 503 hssLoss 504 hssRxFifoFull 505 hssRxFifoEmpty 506 hssTxFifoFull 507 hssTxFifoEmpty 508 hssRxClockInvalid 509 hssTxClockInvalid 525 v24CtrlLineLoss 550 altImageTableUsed 551 defaultImageTableUsed 552 uploadFail 575 pscDemuxAlignmentLost 576 pscTDMAlignmentLost 577 pscMuxAlignmentError 578 pscCompanionTxFail 579 pscSoftwareOverride 580 pscInvalidSwitchValue 600 hsdParamMismatch 601 hsdCompanionLost 602 hsdPMTxFreq 603 hsdPMRxFreq 604 hsdPMTermModState 605 hsdPMTermRfChWidth 606 hsdPMTxPower 607 hsdPMModemIntlvEna 608 lastAlarm Description: The type of an alarm.	.1.3.6.1.4.1.14817.7.3.1.2.31.1.6
aprisaXEAlarmHistoryPresent Indicates whether the alarm is present or not.	COMMON-TC-4RFFourRFAlarmPresent Type Values: 0 noAlarmPresent 1 alarmPresent Description: The possible alarm states, alarmPresent indicates that the alarm is active.	.1.3.6.1.4.1.14817.7.3.1.2.31.1.7
aprisaXEAlarmHistoryTime The time that the alarm state change occurred.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14817.7.3.1.2.31.1.8

This table stores the basic information for the plugin slots.

aprisaXEBoardEntry row .1.3.6.1.4.1.14817.7.3.1.2.66.1

Slot Information.

Indexes

aprisaXEBoardSlot

Column	Syntax	OID
aprisaXEBoardSlot The slot number in which the board resides, the physical slots are numbered from zero to ten and mapped to one to eleven in the MIB. The motherboard is therefore in physical slot 0 but MIB slot 1.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.66.1.1
aprisaXEBoardType The type of the board in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - transmitter : the transmitter card, this will be in physical slo…		.1.3.6.1.4.1.14817.7.3.1.2.66.1.2
aprisaXEExpectedBoardType The type of the board expected in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - transmitter : the transmitter card, this will be in phy…	r/w	.1.3.6.1.4.1.14817.7.3.1.2.66.1.3
aprisaXEBoardHardwareVersion Field indicating the hardware version for the board in the slot.	APRISAXE-TC-4RFAprisaXEHardwareVersion Type Constraints: range: 0..255 Description: Represents a single byte hardware version number.	.1.3.6.1.4.1.14817.7.3.1.2.66.1.4
aprisaXEBoardFirmwareVersion Field indicating the firmware version for the board in the slot.	APRISAXE-TC-4RFAprisaXEHardwareVersion Type Constraints: range: 0..255 Description: Represents a single byte hardware version number.	.1.3.6.1.4.1.14817.7.3.1.2.66.1.5
aprisaXEBoardHSCNumber Field indicating the hardware software configuration number for the board in the slot.	APRISAXE-TC-4RFAprisaXEHardwareVersion Type Constraints: range: 0..255 Description: Represents a single byte hardware version number.	.1.3.6.1.4.1.14817.7.3.1.2.66.1.6
aprisaXEBoardSerialNumber Field indicating the module serial number for the card in the slot.	COMMON-TC-4RFFourRFSerialNumber Type Constraints: range: 8 Description: A module/terminal serial number format xxxx-xxx.	.1.3.6.1.4.1.14817.7.3.1.2.66.1.7

Table of Quad E1 card specific configuration details.

aprisaXEQuadJetBoardEntry row .1.3.6.1.4.1.14817.7.3.1.2.87.1

Quad E1 configuration details.

Indexes

aprisaXEQuadJetBoardTableIndex

Column	Syntax	OID
aprisaXEQuadJetBoardTableIndex Quad E1 board indexed by slot.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.87.1.1

Table based on slot and port of QuadJet cards alarms.

aprisaXEQuadJetPortEntry row .1.3.6.1.4.1.14817.7.3.1.2.88.1

Quad E1 port alarms.

Indexes

aprisaXEQuadJetPortTableSlot aprisaXEQuadJetPortTablePort

Column	Syntax	OID
aprisaXEQuadJetPortTableSlot Port table index based on slot number.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.88.1.1
aprisaXEQuadJetPortTablePort Port table index based on port number.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.2
aprisaXEQuadJetLOFAlarmStatus Red alarm status.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.3
aprisaXEQuadJetLOFAlarmSeverity Red alarm severity.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.4
aprisaXEQuadJetLOFAlarmEnabled Red alarm enabled or disabled.	COMMON-TC-4RFFourRFAlarmEnabled Type Values: 0 disabled 1 enabled Description: Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.5
aprisaXEQuadJetAISAlarmStatus AIS alarm status.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.6
aprisaXEQuadJetAISAlarmSeverity AIS alarm severity.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.7
aprisaXEQuadJetAISAlarmEnabled AIS alarm enabled or disabled.	COMMON-TC-4RFFourRFAlarmEnabled Type Values: 0 disabled 1 enabled Description: Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.8
aprisaXEQuadJetRAIAlarmStatus RAI alarm status.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.9
aprisaXEQuadJetRAIAlarmSeverity RAI alarm severity.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.10
aprisaXEQuadJetRAIAlarmEnabled RAI alarm enabled or disabled.	COMMON-TC-4RFFourRFAlarmEnabled Type Values: 0 disabled 1 enabled Description: Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.11
aprisaXEQuadJetRMAIAlarmStatus RMAI alarm status.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.12
aprisaXEQuadJetRMAIAlarmSeverity RMAI alarm severity.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.13
aprisaXEQuadJetRMAIAlarmEnabled RMAI alarm enabled or disabled.	COMMON-TC-4RFFourRFAlarmEnabled Type Values: 0 disabled 1 enabled Description: Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.14
aprisaXEQuadJetTS16AISAlarmStatus TS16 AIS alarm status.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.15
aprisaXEQuadJetTS16AISAlarmSeverity TS16 AIS alarm severity.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.16
aprisaXEQuadJetTS16AISAlarmEnabled TS16 AIS alarm enabled or disabled.	COMMON-TC-4RFFourRFAlarmEnabled Type Values: 0 disabled 1 enabled Description: Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.17
aprisaXEQuadJetTS16LOSAlarmStatus TS16 LOS alarm status.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.18
aprisaXEQuadJetTS16LOSAlarmSeverity TS16 LOS alarm severity.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.19
aprisaXEQuadJetTS16LOSAlarmEnabled TS16 LOS alarm enabled or disabled.	COMMON-TC-4RFFourRFAlarmEnabled Type Values: 0 disabled 1 enabled Description: Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.20
aprisaXEQuadJetLOSAlarmStatus LOS alarm status.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.21
aprisaXEQuadJetLOSAlarmSeverity LOS alarm severity.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.22
aprisaXEQuadJetLOSAlarmEnabled LOS alarm enabled or disabled.	COMMON-TC-4RFFourRFAlarmEnabled Type Values: 0 disabled 1 enabled Description: Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.23
aprisaXEQuadJetCRC4AlarmStatus CRC4 alarm status.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.24
aprisaXEQuadJetCRC4AlarmSeverity CRC4 alarm severity.	COMMON-TC-4RFFourRFAlarmSeverity Type Values: 0 noSeverity 3 minor 4 major Description: The possible alarm severities, not all values need be used.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.25
aprisaXEQuadJetCRC4AlarmEnabled CRC4 alarm enabled or disabled.	COMMON-TC-4RFFourRFAlarmEnabled Type Values: 0 disabled 1 enabled Description: Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.	.1.3.6.1.4.1.14817.7.3.1.2.88.1.26
aprisaXEQuadJetCRC4AlarmThreshold CRC4 Threshold value for counter to alarm at.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14817.7.3.1.2.88.1.27
aprisaXEQuadJetCRC4AlarmClearThreshold CRC4 Threshold at which alarm clears.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14817.7.3.1.2.88.1.28

Switch data table which describes the
allocation of user data on to the TDM busses.

aprisaXEQuadJetIFConfigEntry row .1.3.6.1.4.1.14817.7.3.1.2.90.1

Quad JET config data.

Indexes

aprisaXEQuadJetIFConfigSlotIndex aprisaXEQuadJetIFConfigPortIndex

Column	Syntax	OID
aprisaXEQuadJetIFConfigSlotIndex Index to the port table based on port number.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.90.1.1
aprisaXEQuadJetIFConfigPortIndex Index to the port table based on port number.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.2
aprisaXEQuadJetTrafficType Controls the traffic type on a Quad JET port.	APRISAXE-TC-4RFAprisaXEQuadJetTrafficTyper/w Type Values: 0 e1Traffic 1 t1Traffic 2 j1Traffic Description: This is used to set the traffic rate for the Quad JET card.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.3
aprisaXEQuadJetLoopbackobsolete Controls the traffic loopback on a Quad JET port.	COMMON-TC-4RFFourRFLoopbackr/w Type Values: 0 loopbackOff 1 loopbackOn Description: This is used to control loopback or monitor status.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.4
aprisaXEQuadJetLineEncoding Controls the line encoding, the default is HDB3 for E1, B8ZS for T1.	APRISAXE-TC-4RFAprisaXEQuadJetLineEncodingr/w Type Values: 0 defaultLineEncoding 1 amiLineEncoding 2 hDB3LineEncoding 4 b8ZSLineEncoding Description: This is used to set the line encoding for the Quad JET card the default is HDB3 for E1 and B8ZS for T1.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.5
aprisaXEQuadJetPcmMode Controls the PCM mode, PCM31 or PCM30C.	APRISAXE-TC-4RFAprisaXEPcmModer/w Type Values: 0 pcm31c 1 pcm30c 2 pcm31 3 pcm30 4 unframed 5 off 6 t1sf 7 t1esf 8 t1sf4 10 t1esf16 Description: The current PCM mode.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.6
aprisaXEQuadJetClockSource Controls whether the port drives the clock soure or not.	COMMON-TC-4RFFourRFNetworkClockSelectr/w Type Values: 0 none 1 primary 2 secondary Description: This is used to select the priority of the clocks to use.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.7
aprisaXEQuadJetLineRadioLoopback This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.	APRISAXE-TC-4RFAprisaXEQuadJetLoopbacksr/w Type Values: 0 e1LoopbacksOff 1 e1LineLoopbackOn 2 e1RadioLoopbackOn Description: This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.8
aprisaXEQuadJetTxWaveFormShaper This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft.	APRISAXE-TC-4RFAprisaXEQuadJetWaveFormShapersr/w Type Values: 2 wfs0To133Ft 3 wfs133To266Ft 4 wfs266To399Ft 5 wfs399To533Ft 6 wfs533To655Ft Description: This is used to set the T1 Tx Waveform Shaper for a port; The default value is 0~133 ft.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.9
aprisaXEQuadJetMultiframeEnable Indicates whether support is enabled for transport of T1 SF and ESF multiframe sync for a port.	APRISAXE-TC-4RFAprisaXEQuadJetMultiframeEnabler/w Type Values: 0 t1MFOff 1 t1MFOn Description: This is used to enable/disable support for transport of T1 SF and ESF multiframe sync for a port.	.1.3.6.1.4.1.14817.7.3.1.2.90.1.10

Interface connection table which holds all the cross
connect information for the E1 card.

aprisaXEQuadJetIFConnectionTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.91.1

Quad JET cross connection data.

Indexes

aprisaXEQuadJetIFConnectionID aprisaXEQuadJetIFConnectionAggregateID

Column	Syntax	OID
aprisaXEQuadJetIFConnectionID Backplane Connection ID.	APRISAXE-TC-4RFAprisaXEConnectionID Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.91.1.1
aprisaXEQuadJetIFConnectionAggregateID Aggregate ID, 0 if an unframed connection.	APRISAXE-TC-4RFAprisaXEConnectionID Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.91.1.2
aprisaXEQuadJetIFConnectionSlot Slot number that this card is in.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.91.1.3
aprisaXEQuadJetIFConnectionE1Port Port number associated with this connection.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.91.1.4
aprisaXEQuadJetIFConnectionType Indicates whether the connection is for data or CAS signalling.	APRISAXE-TC-4RFAprisaXEQuadJetConnectionType Type Values: 0 dataConnection 1 casConnection 2 tsLoopbackConnection Description: Indicates whether a connection is for data or CAS signalling.	.1.3.6.1.4.1.14817.7.3.1.2.91.1.5

Table used to control and monitor basic ethernet
features on the 4-port hub.

aprisaXEEthernetPortEntry row .1.3.6.1.4.1.14817.7.3.1.2.96.1

Ethernet port status and configuration.

Indexes

aprisaXEEthernetPortIndex

Column	Syntax	OID
aprisaXEEthernetPortIndex The port index, there are four ports on the hub.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.14817.7.3.1.2.96.1.1
aprisaXEEthernetAutonegotiationStatus The status of the port auto-negotiation.	Enumeration Enumerated Values: 0 autoNegotiationNotComplete 1 autoNegotiationComplete	.1.3.6.1.4.1.14817.7.3.1.2.96.1.2
aprisaXEEthernetRemoteFaultStatus The status of the port remote fault detection.	Enumeration Enumerated Values: 0 remoteFaultNotDetected 1 remoteFaultDetected	.1.3.6.1.4.1.14817.7.3.1.2.96.1.3
aprisaXEEthernetLinkStatus The status of the port link.	Enumeration Enumerated Values: 0 down 1 up	.1.3.6.1.4.1.14817.7.3.1.2.96.1.4
aprisaXEEthernetJabberStatus Has jabber been detected on the port?.	Enumeration Enumerated Values: 0 jabberNotDetected 1 jabberDetected	.1.3.6.1.4.1.14817.7.3.1.2.96.1.5
aprisaXEEthernetSpeed The current port speed, 10 or 100 Mbps.	Enumeration Enumerated Values: 0 mbps10 1 mbps100	.1.3.6.1.4.1.14817.7.3.1.2.96.1.6
aprisaXEEthernetDuplexMode The current port duplex mode.	Enumeration Enumerated Values: 0 halfDuplex 1 fullDuplex	.1.3.6.1.4.1.14817.7.3.1.2.96.1.7

Table used to display and configure Ethernet settings.

aprisaXEEthernetTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.97.1

Individual Ethernet port settings.

Indexes

aprisaXEEthernetPortNum

Column	Syntax	OID
aprisaXEEthernetPortNum The port number, there are four ports on the hub.	APRISAXE-TC-4RFAprisaXEEthernetPortNumber Type Values: 1 eth1 2 eth2 3 eth3 4 eth4 Description: Ethernet port numbers.	.1.3.6.1.4.1.14817.7.3.1.2.97.1.1
aprisaXEEthernetGroup The Ethernet Group of which this port is a member.	APRISAXE-TC-4RFAprisaXEEthernetGroupr/w Type Values: 1 user1 2 user2 3 user3 4 user4 5 userAndMgmt Description: Used for Ethernet groupings.	.1.3.6.1.4.1.14817.7.3.1.2.97.1.2
aprisaXEEthernetIngressRate The ingress frame rate limit for this port.	APRISAXE-TC-4RFAprisaXEEthernetFrameRater/w Type Values: 0 unlimited 1 limit128kbps 2 limit256kbps 3 limit512kbps 4 limit1Mbps 5 limit2Mbps 6 limit4Mbps 7 limit8Mbps Description: The frame rate limits allowed by the Marvell switch.	.1.3.6.1.4.1.14817.7.3.1.2.97.1.3
aprisaXEEthernetPortPriority Indicates the bandwidth allocated to this port.	APRISAXE-TC-4RFAprisaXEEthernetPortPriorityr/w Type Values: 0 fromFrame 1 low 3 medium 5 high 7 vHigh Description: Indicates the bandwidth allocated to a port.	.1.3.6.1.4.1.14817.7.3.1.2.97.1.4

Table used to monitor the current interface status.

aprisaXEInterfaceTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.100.1

Interface bandwidth and status.

Indexes

aprisaXEInterfaceIndex

Column	Syntax	OID
aprisaXEInterfaceIndex The slot containing the interface card, slots 0 to 8 (AUX or A-H) inclusive may contain interface cards.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.100.1.1
aprisaXEInterfaceType Indicates the type of interface card.		.1.3.6.1.4.1.14817.7.3.1.2.100.1.2
aprisaXEInterfaceAlarmStatus Indicates the current alarm status for the interface.	COMMON-TC-4RFFourRFAlarmStatus Type Values: 0 noAlarm 1 informationAlarm 2 warningAlarm 3 minorAlarm 4 majorAlarm 5 criticalAlarm Description: This is used to identify current alarm status.	.1.3.6.1.4.1.14817.7.3.1.2.100.1.3
aprisaXEInterfacePort1Bandwidth Indicates the bandwidth allocated to port 1.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14817.7.3.1.2.100.1.4
aprisaXEInterfacePort2Bandwidth Indicates the bandwidth allocated to port 2.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14817.7.3.1.2.100.1.5
aprisaXEInterfacePort3Bandwidth Indicates the bandwidth allocated to port 3.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14817.7.3.1.2.100.1.6
aprisaXEInterfacePort4Bandwidth Indicates the bandwidth allocated to port 4.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14817.7.3.1.2.100.1.7

Status and Control table for 4Wire.

aprisaXE4WirePortControlTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.110.1

Entries for 4wire table.

Indexes

aprisaXE4WireSlotIndex aprisaXE4WirePortIndex

Column	Syntax	OID
aprisaXE4WireConnectionID Associated cross-connect Backplane Connection ID.	APRISAXE-TC-4RFAprisaXEConnectionIDr/w Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.1
aprisaXE4WireSlotIndex Slot index for 4wire Status Control table.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.110.1.2
aprisaXE4WirePortIndex Channel index for 4 Wire Control Status table.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.3
aprisaXE4WireLoopback Loopback control on or off for channels.	COMMON-TC-4RFFourRFLoopbackr/w Type Values: 0 loopbackOff 1 loopbackOn Description: This is used to control loopback or monitor status.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.4
aprisaXE4WireAdpcmCompression ADPCM compression 16, 24, 32, 64 kbps or none.	APRISAXE-TC-4RFAprisaXEAdpcmCompressionr/w Type Values: 0 kbits16 1 kbits24 2 kbits32 3 kbits64 4 kbits0 Description: This defines the Compression available on ADPCM.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.5
aprisaXE4WireRxGainobsolete Rx gain +4 dB to -14 dB in 0.5 dB steps.	APRISAXE-TC-4RFAprisaXE4WRxGainr/w Type Values: 0 dbpos40 1 dbpos35 2 dbpos30 3 dbpos25 4 dbpos20 5 dbpos15 6 dbpos10 7 dbpos05 8 dbpos0 9 dbneg05 10 dbneg10 11 dbneg15 12 dbneg20 13 dbneg25 14 dbneg30 15 dbneg35 16 dbneg40 17 dbneg45 18 dbneg50 19 dbneg55 20 dbneg60 21 dbneg65 22 dbneg70 23 dbneg75 24 dbneg80 25 dbneg85 26 dbneg90 27 dbneg95 28 dbneg100 29 dbneg105 30 dbneg110 31 dbneg115 32 dbneg120 33 dbneg125 34 dbneg130 35 dbneg135 36 dbneg140 Description: The gain in half dB steps for 4wire mux cards.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.6
aprisaXE4WireTxGainobsolete Tx gain +14 dB to -4 dB in half dB steps.	APRISAXE-TC-4RFAprisaXE4WTxGainr/w Type Values: 0 pos140 1 pos135 2 pos130 3 pos125 4 pos120 5 pos115 6 pos110 7 pos105 8 pos100 9 pos95 10 pos90 11 pos85 12 pos80 13 pos75 14 pos70 15 pos65 16 pos60 17 pos55 18 pos50 19 pos45 20 pos40 21 pos35 22 pos30 23 pos25 24 pos20 25 pos15 26 pos10 27 pos05 28 pos0 29 neg05 30 neg10 31 neg15 32 neg20 33 neg25 34 neg30 35 neg35 36 neg40 Description: The gain in half dB steps for 4wire mux cards.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.7
aprisaXE4WireEInvert Controls E on each channel for NORMAL or INVERT polarity.	APRISAXE-TC-4RFAprisaXESignalStater/w Type Values: 0 normal 1 invert Description: This indicates the state of CAS signalling.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.8
aprisaXE4WireMInvert Controls M on each channel for NORMAL or INVERT polarity.	APRISAXE-TC-4RFAprisaXESignalStater/w Type Values: 0 normal 1 invert Description: This indicates the state of CAS signalling.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.9
aprisaXE4WireSignalling Enables or disables E&M signalling for the port.	Enumerationr/w Enumerated Values: 0 signallingOff 1 signallingOn	.1.3.6.1.4.1.14817.7.3.1.2.110.1.10
aprisaXE4WireSignallingConnectionID Associated signalling cross-connect Backplane Connection ID.	APRISAXE-TC-4RFAprisaXEConnectionIDr/w Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.11
aprisaXE4WireInputLevel Input Level -14.0 dBr to +4.0 dBr in half dB steps.	APRISAXE-TC-4RFAprisaXE4WInputLevelr/w Type Values: 0 q4emadneg140 1 q4emadneg135 2 q4emadneg130 3 q4emadneg125 4 q4emadneg120 5 q4emadneg115 6 q4emadneg110 7 q4emadneg105 8 q4emadneg100 9 q4emadneg95 10 q4emadneg90 11 q4emadneg85 12 q4emadneg80 13 q4emadneg75 14 q4emadneg70 15 q4emadneg65 16 q4emadneg60 17 q4emadneg55 18 q4emadneg50 19 q4emadneg45 20 q4emadneg40 21 q4emadneg35 22 q4emadneg30 23 q4emadneg25 24 q4emadneg20 25 q4emadneg15 26 q4emadneg10 27 q4emadneg05 28 q4emadpos0 29 q4emadpos05 30 q4emadpos10 31 q4emadpos15 32 q4emadpos20 33 q4emadpos25 34 q4emadpos30 35 q4emadpos35 36 q4emadpos40 Description: The input (A->D) level in half dB steps for the 4wire mux cards.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.12
aprisaXE4WireOutputLevel Output Level -14.0 dBr to +4.0 dBr in 0.5 dB steps.	APRISAXE-TC-4RFAprisaXE4WOutputLevelr/w Type Values: 0 q4emdapos40 1 q4emdapos35 2 q4emdapos30 3 q4emdapos25 4 q4emdapos20 5 q4emdapos15 6 q4emdapos10 7 q4emdapos05 8 q4emdapos0 9 q4emdaneg05 10 q4emdaneg10 11 q4emdaneg15 12 q4emdaneg20 13 q4emdaneg25 14 q4emdaneg30 15 q4emdaneg35 16 q4emdaneg40 17 q4emdaneg45 18 q4emdaneg50 19 q4emdaneg55 20 q4emdaneg60 21 q4emdaneg65 22 q4emdaneg70 23 q4emdaneg75 24 q4emdaneg80 25 q4emdaneg85 26 q4emdaneg90 27 q4emdaneg95 28 q4emdaneg100 29 q4emdaneg105 30 q4emdaneg110 31 q4emdaneg115 32 q4emdaneg120 33 q4emdaneg125 34 q4emdaneg130 35 q4emdaneg135 36 q4emdaneg140 Description: The output (D->A) level in half dB steps for the 4wire mux cards.	.1.3.6.1.4.1.14817.7.3.1.2.110.1.13

Overall card control and status.

aprisaXE4WireStatusControlTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.121.1

Status control entries.

Indexes

aprisaXE4WireStatusControlSlotIndex

Column	Syntax	OID
aprisaXE4WireStatusControlSlotIndex Index for table.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.121.1.1
aprisaXE4WirePcmLaw Sets A-law or u-law.	APRISAXE-TC-4RFAprisaXEPcmLawr/w Type Values: 0 alaw 1 ulaw Description: Type of PCM encoding available.	.1.3.6.1.4.1.14817.7.3.1.2.121.1.2

Port Control table for FXO.

aprisaXEFXOPortControlTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.130.1

Entries for FXO table.

Indexes

aprisaXEFXOPortControlSlotIndex aprisaXEFXOPortIndex

Column	Syntax	OID
aprisaXEFXOPortControlSlotIndex Slot index for FXO Control table.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.130.1.1
aprisaXEFXOPortIndex Port index for FXO Control table.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.130.1.2
aprisaXEFXOLoopback Loopback control on or off for ports.	COMMON-TC-4RFFourRFLoopbackr/w Type Values: 0 loopbackOff 1 loopbackOn Description: This is used to control loopback or monitor status.	.1.3.6.1.4.1.14817.7.3.1.2.130.1.3
aprisaXEFXOAdpcmCompression ADPCM compression 16, 24, 32, 64 kbps or none.	APRISAXE-TC-4RFAprisaXEAdpcmCompressionr/w Type Values: 0 kbits16 1 kbits24 2 kbits32 3 kbits64 4 kbits0 Description: This defines the Compression available on ADPCM.	.1.3.6.1.4.1.14817.7.3.1.2.130.1.4
aprisaXEFXORxGainobsolete Rx gain -10 dB to 10 dB in 0.5 dB steps.	Enumerationr/w Enumerated Values: 0 fxopos100 1 fxopos95 2 fxopos90 3 fxopos85 4 fxopos80 5 fxopos75 6 fxopos70 7 fxopos65 8 fxopos60 9 fxopos55 10 fxopos50 11 fxopos45 12 fxopos40 13 fxopos35 14 fxopos30 15 fxopos25 16 fxopos20 17 fxopos15 18 fxopos10 19 fxopos05 20 fxopos0 21 fxoneg05 22 fxoneg10 23 fxoneg15 24 fxoneg20 25 fxoneg25 26 fxoneg30 27 fxoneg35 28 fxoneg40 29 fxoneg45 30 fxoneg50 31 fxoneg55 32 fxoneg60 33 fxoneg65 34 fxoneg70 35 fxoneg75 36 fxoneg80 37 fxoneg85 38 fxoneg90 39 fxoneg95 40 fxoneg100	.1.3.6.1.4.1.14817.7.3.1.2.130.1.5
aprisaXEFXOTxGainobsolete Tx gain -10 dB to 10 dB in half dB steps.	Enumerationr/w Enumerated Values: 0 fxopos100 1 fxopos95 2 fxopos90 3 fxopos85 4 fxopos80 5 fxopos75 6 fxopos70 7 fxopos65 8 fxopos60 9 fxopos55 10 fxopos50 11 fxopos45 12 fxopos40 13 fxopos35 14 fxopos30 15 fxopos25 16 fxopos20 17 fxopos15 18 fxopos10 19 fxopos05 20 fxopos0 21 fxoneg05 22 fxoneg10 23 fxoneg15 24 fxoneg20 25 fxoneg25 26 fxoneg30 27 fxoneg35 28 fxoneg40 29 fxoneg45 30 fxoneg50 31 fxoneg55 32 fxoneg60 33 fxoneg65 34 fxoneg70 35 fxoneg75 36 fxoneg80 37 fxoneg85 38 fxoneg90 39 fxoneg95 40 fxoneg100	.1.3.6.1.4.1.14817.7.3.1.2.130.1.6
aprisaXEFXOConnectionID Associated cross-connect Backplane Connection ID.	APRISAXE-TC-4RFAprisaXEConnectionIDr/w Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.130.1.7
aprisaXEFXOSignallingConnectionID Associated signalling cross-connect Backplane Connection ID.	APRISAXE-TC-4RFAprisaXEConnectionIDr/w Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.130.1.8
aprisaXEFXOInputLevel Input Level -10.0 dBr to +1.0 dBr in half dB steps.	APRISAXE-TC-4RFAprisaXEFXOInputLevelr/w Type Values: 0 dfxoadneg100 1 dfxoadneg95 2 dfxoadneg90 3 dfxoadneg85 4 dfxoadneg80 5 dfxoadneg75 6 dfxoadneg70 7 dfxoadneg65 8 dfxoadneg60 9 dfxoadneg55 10 dfxoadneg50 11 dfxoadneg45 12 dfxoadneg40 13 dfxoadneg35 14 dfxoadneg30 15 dfxoadneg25 16 dfxoadneg20 17 dfxoadneg15 18 dfxoadneg10 19 dfxoadneg05 20 dfxoadpos0 21 dfxoadpos05 22 dfxoadpos10 Description: The output (A->D) level in half dB steps for the DFXO mux cards.	.1.3.6.1.4.1.14817.7.3.1.2.130.1.9
aprisaXEFXOOutputLevel Output Level -10.0 dBr to +1.0 dBr in 0.5 dB steps.	APRISAXE-TC-4RFAprisaXEFXOOutputLevelr/w Type Values: 18 dfxodapos10 19 dfxodapos05 20 dfxodapos0 21 dfxodaneg05 22 dfxodaneg10 23 dfxodaneg15 24 dfxodaneg20 25 dfxodaneg25 26 dfxodaneg30 27 dfxodaneg35 28 dfxodaneg40 29 dfxodaneg45 30 dfxodaneg50 31 dfxodaneg55 32 dfxodaneg60 33 dfxodaneg65 34 dfxodaneg70 35 dfxodaneg75 36 dfxodaneg80 37 dfxodaneg85 38 dfxodaneg90 39 dfxodaneg95 40 dfxodaneg100 Description: The output (D->A) level in half dB steps for the DFXO mux cards.	.1.3.6.1.4.1.14817.7.3.1.2.130.1.10

Control table for FXO.

aprisaXEFXOControlTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.140.1

Entries for FXO table.

Indexes

aprisaXEFXOControlSlotIndex

Column	Syntax	OID
aprisaXEFXOControlSlotIndex Slot index for FXO Control table.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.140.1.1
aprisaXEFXOSPMBandwidth Set the spm detector bandwidth to 1.5%, 3.5%, 5.5% or 7.5%.	Enumerationr/w Enumerated Values: 0 perc15 1 perc35 2 perc55 3 perc75	.1.3.6.1.4.1.14817.7.3.1.2.140.1.2
aprisaXEFXOSPMFrequency Set the spm detector frequency to 12kHz or 16kHz.	Enumerationr/w Enumerated Values: 0 khz12 1 khz16	.1.3.6.1.4.1.14817.7.3.1.2.140.1.3
aprisaXEFXOSPMLevel Set the spm detector level 0 to 27 dB.	APRISAXE-TC-4RFAprisaXEFXSPMLevelr/w Type Values: 0 l0 1 l1 2 l2 3 l3 4 l4 5 l5 6 l6 7 l7 8 l8 9 l9 10 l10 11 l11 12 l12 13 l13 14 l14 15 l15 16 l16 17 l17 18 l18 19 l19 20 l20 21 l21 22 l22 23 l23 24 l24 25 l25 26 l26 27 l27 Description: Type of SPM level.	.1.3.6.1.4.1.14817.7.3.1.2.140.1.4
aprisaXEFXOCasMode Set the CAS mode to XE,SE or 4Wire compatible.	Enumerationr/w Enumerated Values: 0 casxe 1 casse 2 cas4w	.1.3.6.1.4.1.14817.7.3.1.2.140.1.5
aprisaXEFXOCasSignalobsolete Set the CAS signal to normal or invert.	APRISAXE-TC-4RFAprisaXESignalStater/w Type Values: 0 normal 1 invert Description: This indicates the state of CAS signalling.	.1.3.6.1.4.1.14817.7.3.1.2.140.1.6
aprisaXEFXOPCMLaw Set the PCM law to A-law or u-law.	APRISAXE-TC-4RFAprisaXEPcmLawr/w Type Values: 0 alaw 1 ulaw Description: Type of PCM encoding available.	.1.3.6.1.4.1.14817.7.3.1.2.140.1.7
aprisaXEFXOOnHookSpeed Set the on hook speed to fast, medium or slow.	Enumerationr/w Enumerated Values: 0 ohsFast 1 ohsMedium 2 ohsSlow	.1.3.6.1.4.1.14817.7.3.1.2.140.1.8
aprisaXEFXORingerImpedance Set the ringer impedance to high or synthesized.	Enumerationr/w Enumerated Values: 0 rzHigh 1 rxSynthesized	.1.3.6.1.4.1.14817.7.3.1.2.140.1.9
aprisaXEFXORingerThreshold Set the ringer threshold to low, medium or high.	Enumerationr/w Enumerated Values: 0 rtLow 1 rtMedium 2 rtHigh	.1.3.6.1.4.1.14817.7.3.1.2.140.1.10
aprisaXEFXOLoopCurrentLimit Set the loop current limiter to off or on.	Enumerationr/w Enumerated Values: 0 ilimOff 1 ilimOn	.1.3.6.1.4.1.14817.7.3.1.2.140.1.11
aprisaXEFXOMinLoopCurrent Set the min loop current to low, medium or high.	Enumerationr/w Enumerated Values: 0 miniLow 1 miniMedium 2 miniHigh	.1.3.6.1.4.1.14817.7.3.1.2.140.1.12
aprisaXEFXOTipRingVoltage Set the tip ring voltage to low, medium or high.	Enumerationr/w Enumerated Values: 0 dcvLow 1 dcvMedium 2 dcvHigh	.1.3.6.1.4.1.14817.7.3.1.2.140.1.13
aprisaXEFXOLineImpedance Set the line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms || 120 nF), TBR21 - 270 Ohms + (750 Ohms || 150 nF), BT3 - 370 Ohms + (620 Ohms || 310 nF), BT Network - …	Enumerationr/w Enumerated Values: 0 acim0 1 acim1 2 acim11 3 acim13 4 acim3 5 acim2 6 acim4 7 acim9 8 acim10	.1.3.6.1.4.1.14817.7.3.1.2.140.1.14
aprisaXEFXOLineReversalobsolete Set the line reversal on/off.	Enumerationr/w Enumerated Values: 0 fxoLineRevOn 1 fxoLineRevOff	.1.3.6.1.4.1.14817.7.3.1.2.140.1.15
aprisaXEFXOABitFault Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.	APRISAXE-TC-4RFAprisaXE2WireSignalStater/w Type Values: 0 fxTransNormal 1 fxTransInvert 2 fxForcedNormal 3 fxForcedInvert Description: This indicates the state of the CAS signalling bits as normal, inverted and disabled.	.1.3.6.1.4.1.14817.7.3.1.2.140.1.16
aprisaXEFXOBBitRing Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.	APRISAXE-TC-4RFAprisaXE2WireSignalStater/w Type Values: 0 fxTransNormal 1 fxTransInvert 2 fxForcedNormal 3 fxForcedInvert Description: This indicates the state of the CAS signalling bits as normal, inverted and disabled.	.1.3.6.1.4.1.14817.7.3.1.2.140.1.17
aprisaXEFXOCBitBilling Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.	APRISAXE-TC-4RFAprisaXE2WireSignalStater/w Type Values: 0 fxTransNormal 1 fxTransInvert 2 fxForcedNormal 3 fxForcedInvert Description: This indicates the state of the CAS signalling bits as normal, inverted and disabled.	.1.3.6.1.4.1.14817.7.3.1.2.140.1.18
aprisaXEFXODBitReversals Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.	APRISAXE-TC-4RFAprisaXE2WireSignalStater/w Type Values: 0 fxTransNormal 1 fxTransInvert 2 fxForcedNormal 3 fxForcedInvert Description: This indicates the state of the CAS signalling bits as normal, inverted and disabled.	.1.3.6.1.4.1.14817.7.3.1.2.140.1.19
aprisaXEFXOEchoCanceller Set the echo canceller to off, on or auto. The reserved values are for internal use only and cannot be set via SNMP.	Enumerationr/w Enumerated Values: 0 fxoEchoCancellerOff 1 fxoEchoCancellerOn 2 fxoEchoCancellerAutoG164 3 fxoEchoCancellerAutoG165 4 fxoEchoCancellerReserved1 5 fxoEchoCancellerReserved2 6 fxoEchoCancellerReserved3	.1.3.6.1.4.1.14817.7.3.1.2.140.1.20
aprisaXEFXOABitOffHook Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted.	APRISAXE-TC-4RFAprisaXE2WireSignalStater/w Type Values: 0 fxTransNormal 1 fxTransInvert 2 fxForcedNormal 3 fxForcedInvert Description: This indicates the state of the CAS signalling bits as normal, inverted and disabled.	.1.3.6.1.4.1.14817.7.3.1.2.140.1.21

Table of AprisaXE Cross connections.

aprisaXEBackplaneConnectionTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.150.1

Table entries define a circuit carried ove a TDM bus.

Indexes

aprisaXEBackplaneConnectionID

Column	Syntax	OID
aprisaXEBackplaneConnectionID Handle to associate circuits with backplane connections.	APRISAXE-TC-4RFAprisaXEConnectionIDr/w Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.150.1.1
aprisaXEBackplaneTdmBus TDM Bus to switch: busA - busD.	APRISAXE-TC-4RFAprisaXETdmBusr/w Type Values: 0 tdmBusA 1 tdmBusB 2 tdmBusC 3 tdmBusD Description: This is used to set the TDM bus to use.	.1.3.6.1.4.1.14817.7.3.1.2.150.1.2
aprisaXEBackplaneStartBitPos Start bit position on the associated TDM bus (0 - 2047).	Integer32r/w Constraints: range: 0-2047	.1.3.6.1.4.1.14817.7.3.1.2.150.1.3
aprisaXEBackplaneLength Number of bits to place on the backplane TDM bus (0 - 2047).	Integer32r/w Constraints: range: 0-2047	.1.3.6.1.4.1.14817.7.3.1.2.150.1.4
aprisaXEBackplaneInterface The type of circuit this backplane connection is carrying.	APRISAXE-TC-4RFAprisaXEInterfaceCnxnTyper/w Type Values: 0 none 1 unframedE1Intf 2 unframedT1Intf 3 aggregateIntf 4 fourWireIntf 5 fxoIntf 6 fxsIntf 7 v24AsyncIntf 8 custEthernetIntf 9 mgmtEthernetIntf 10 syncSerialIntf 12 hssControlIntf 13 dropAndInsertIntf Description: This describes the interface connection type. The values are arbitrary and are primarily used to identify instances of aggregate connections.	.1.3.6.1.4.1.14817.7.3.1.2.150.1.5

Table of Aggregated backplane connections used for
interfaces with further cross-connection capability.

aprisaXEAggregateConnectionTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.160.1

Indexes

aprisaXEAggregateBackplaneID aprisaXEAggregateInterfaceID aprisaXEAggregateStartBitPos

Column	Syntax	OID
aprisaXEAggregateBackplaneID Backplane Connection identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14817.7.3.1.2.160.1.1
aprisaXEAggregateInterfaceID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14817.7.3.1.2.160.1.2
aprisaXEAggregateStartBitPos Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.14817.7.3.1.2.160.1.3
aprisaXEAggregateLength Number of bits required for this interface connection.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.14817.7.3.1.2.160.1.4
aprisaXEAggregateOffset Offset into the aggregate connection where this interface connection is placed.	Integer32 Constraints: range: 0-2047	.1.3.6.1.4.1.14817.7.3.1.2.160.1.5
aprisaXEAggregateE1Port Port number associated with this connection.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.160.1.6

Port Control table for FXS.

aprisaXEFXSPortControlTableEntry row .1.3.6.1.4.1.14817.7.3.1.2.190.1

Entries for FXS table.

Indexes

aprisaXEFXSPortControlSlotIndex aprisaXEFXSPortIndex

Column	Syntax	OID
aprisaXEFXSPortControlSlotIndex Slot index for FXS Control table.	APRISAXE-TC-4RFAprisaXESlotNumber Type Values: 0 rxSlot 1 txSlot 2 slotA 3 slotB 4 slotC 5 slotD 6 slotE 7 slotF 8 slotG 9 slotH 10 auxSlot 255 noSlot Description: Represents a slot number in the AprisaXE, the slots include the modem, transmitter and receiver as well as the MUX cards. H/W Slot Card Slot Name 0 Aux/Modem Aux 1 MUX Card H 2 MUX…	.1.3.6.1.4.1.14817.7.3.1.2.190.1.1
aprisaXEFXSPortIndex Port index for FXS Control table.	APRISAXE-TC-4RFAprisaXEPortNumber Type Values: 0 noPort 1 portOne 2 portTwo 3 portThree 4 portFour Description: This is used to identify a port e.g. reporting an alarm. Not all alarms are associated with a port, in these cases noPort will be used.	.1.3.6.1.4.1.14817.7.3.1.2.190.1.2
aprisaXEFXSLoopback Loopback control on or off for ports.	COMMON-TC-4RFFourRFLoopbackr/w Type Values: 0 loopbackOff 1 loopbackOn Description: This is used to control loopback or monitor status.	.1.3.6.1.4.1.14817.7.3.1.2.190.1.3
aprisaXEFXSAdpcmCompression ADPCM compression 16, 24, 32, 64 kbps or none.	APRISAXE-TC-4RFAprisaXEAdpcmCompressionr/w Type Values: 0 kbits16 1 kbits24 2 kbits32 3 kbits64 4 kbits0 Description: This defines the Compression available on ADPCM.	.1.3.6.1.4.1.14817.7.3.1.2.190.1.4
aprisaXEFXSRxGainobsolete Rx gain -9.5 dB to +3 dB in 0.5 dB steps.	Enumerationr/w Enumerated Values: 0 fxsrxpos30 1 fxsrxpos25 2 fxsrxpos20 3 fxsrxpos15 4 fxsrxpos10 5 fxsrxpos05 6 fxsrxpos0 7 fxsrxneg05 8 fxsrxneg10 9 fxsrxneg15 10 fxsrxneg20 11 fxsrxneg25 12 fxsrxneg30 13 fxsrxneg35 14 fxsrxneg40 15 fxsrxneg45 16 fxsrxneg50 17 fxsrxneg55 18 fxsrxneg60 19 fxsrxneg65 20 fxsrxneg70 21 fxsrxneg75 22 fxsrxneg80 23 fxsrxneg85 24 fxsrxneg90 25 fxsrxneg95	.1.3.6.1.4.1.14817.7.3.1.2.190.1.5
aprisaXEFXSTxGainobsolete Tx gain -3 dB to 9.5 dB in 0.5 dB steps.	Enumerationr/w Enumerated Values: 0 fxstxpos95 1 fxstxpos90 2 fxstxpos85 3 fxstxpos80 4 fxstxpos75 5 fxstxpos70 6 fxstxpos65 7 fxstxpos60 8 fxstxpos55 9 fxstxpos50 10 fxstxpos45 11 fxstxpos40 12 fxstxpos35 13 fxstxpos30 14 fxstxpos25 15 fxstxpos20 16 fxstxpos15 17 fxstxpos10 18 fxstxpos05 19 fxstxpos0 20 fxstxneg05 21 fxstxneg10 22 fxstxneg15 23 fxstxneg20 24 fxstxneg25 25 fxstxneg30	.1.3.6.1.4.1.14817.7.3.1.2.190.1.6
aprisaXEFXSConnectionID Associated cross-connect Backplane Connection ID.	APRISAXE-TC-4RFAprisaXEConnectionIDr/w Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.190.1.7
aprisaXEFXSSignallingConnectionID Associated signalling cross-connect Backplane Connection ID.	APRISAXE-TC-4RFAprisaXEConnectionIDr/w Type Constraints: range: 0..65535 Description: Represents a unique cross-connection identifier.	.1.3.6.1.4.1.14817.7.3.1.2.190.1.8
aprisaXEFXSInputLevel Input Level -9.0 dBr to +3.0 dBr in half dB steps.	APRISAXE-TC-4RFAprisaXEFXSInputLevelr/w Type Values: 1 dfxsadneg90 2 dfxsadneg85 3 dfxsadneg80 4 dfxsadneg75 5 dfxsadneg70 6 dfxsadneg65 7 dfxsadneg60 8 dfxsadneg55 9 dfxsadneg50 10 dfxsadneg45 11 dfxsadneg40 12 dfxsadneg35 13 dfxsadneg30 14 dfxsadneg25 15 dfxsadneg20 16 dfxsadneg15 17 dfxsadneg10 18 dfxsadneg05 19 dfxsadpos0 20 dfxsadpos05 21 dfxsadpos10 22 dfxsadpos15 23 dfxsadpos20 Description: The output (A->D) level in half dB steps for the DFXS mux cards.	.1.3.6.1.4.1.14817.7.3.1.2.190.1.9
aprisaXEFXSOutputLevel Output Level -9.5 dBr to +2.5 dBr in 0.5 dB steps.	APRISAXE-TC-4RFAprisaXEFXSOutputLevelr/w Type Values: 1 dfxsdapos25 2 dfxsdapos20 3 dfxsdapos15 4 dfxsdapos10 5 dfxsdapos05 6 dfxsdapos0 7 dfxsdaneg05 8 dfxsdaneg10 9 dfxsdaneg15 10 dfxsdaneg20 11 dfxsdaneg25 12 dfxsdaneg30 13 dfxsdaneg35 14 dfxsdaneg40 15 dfxsdaneg45 16 dfxsdaneg50 17 dfxsdaneg55 18 dfxsdaneg60 19 dfxsdaneg65 20 dfxsdaneg70 21 dfxsdaneg75 22 dfxsdaneg80 23 dfxsdaneg85 24 dfxsdaneg90 25 dfxsdaneg95 Description: The output (D->A) level in half dB steps for the DFXS mux cards.	.1.3.6.1.4.1.14817.7.3.1.2.190.1.10
aprisaXEFXSPathMute Applies DFXS Mute Function - No Mute, Mute Rx or Mute Tx.	APRISAXE-TC-4RFAprisaXEFXSPathMuter/w Type Values: 0 noMute 16 muteRx 32 muteTx Description: The status of the Path Mute function for the DFXS.	.1.3.6.1.4.1.14817.7.3.1.2.190.1.11