AP-WLAN Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
87

apWlanInfoTable

table
.1.3.6.1.4.1.27662.200.1.1.4.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanInfoTable' 
WLAN Info table.
apWlanInfoEntry row .1.3.6.1.4.1.27662.200.1.1.4.1.1.1
An entry in the apWlanInfoTable.
Indexes
No indexes recorded
Column Syntax OID
apCurrentWlanIndex
This attribute indicates the WLAN index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27662.200.1.1.4.1.1.1.1
apCurrentSsid
This attribute indicates the WLAN index
OctetString .1.3.6.1.4.1.27662.200.1.1.4.1.1.1.2
apCurrentWlanBssid
This attribute indicates the WLAN index
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27662.200.1.1.4.1.1.1.3

apWlanStatTable

table
.1.3.6.1.4.1.27662.200.1.1.4.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanStatTable' 
WLAN Status table.
apWlanStatEntry row .1.3.6.1.4.1.27662.200.1.1.4.1.2.1
An entry in the apWlanStatTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanInfoTxPackets
This attribute indicates the WLAN index
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27662.200.1.1.4.1.2.1.1
apWlanInfoRxPackets
This attribute indicates the WLAN index
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27662.200.1.1.4.1.2.1.2
apWlanInfoTxBytes
This attribute indicates the WLAN index
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27662.200.1.1.4.1.2.1.3
apWlanInfoRxBytes
This attribute indicates the WLAN index
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.27662.200.1.1.4.1.2.1.4

apWlanBasicConfigTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.1 · 1 row entry · 16 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanBasicConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanBasicConfigTable' 
WLAN basic config table.
apWlanBasicConfigEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.1.1
An entry in the apWlanBasicConfigTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanIndex
This attribute indicates the WLAN index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.1
apWlanRowControl
The WLAN status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.2
apWlanEnable
This attribute indicates the status of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.3
apWlanSsid
This attribute indicates the ssid of the wireless network.
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.4
apWlanBroadcastSsid
This attribute indicates the status of the broadcast ssid.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.5
apWlanDataRate
This attribute indicates the data rate of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.6
apWlanMulticastFilter
This attribute indicates the status of the multicast filter
of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.7
apWlanMulticastRate
This attribute indicates the multicast rate of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.8
apWlanIgmpSnooping
This attribute indicates the IGMP Snooping status of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.9
apWlanVlanId
This attribute indicates the vlan id of the wireless network.
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.10
apWlanQos
This attribute indicates the QoS of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.11
apWlanL2Isolation
This attribute indicates the Layer 2 Isolation of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.12
apWlanRadioSelect
This attribute indicates the radio selection of the wireless network.
Remarks:
1 means start on radio 1,
2 means start on radio 2,
3 means start on both radio 1 and 2
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.13
apWlanVlanPoolEnable
This attribute indicates the vlan pool enable of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.14
apWlanVlanPoolList
This attribute indicates the vlan pool list of the wireless network.
Remarks:
Please enter number between 0 to 4095 and maximum item 32
e.g. 1,3,9-11,15
or
1-32
or
1-30,31,32
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.15
apWlanBandSteer
This attribute indicates the band steering of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.1.1.16

apWlanSecurityConfigTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.2 · 1 row entry · 10 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanSecurityConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanSecurityConfigTable' 
WLAN security info table.
apWlanSecurityConfigEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.2.1
An entry in the apWlanSecurityConfigTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanSecurityConfigRowControl
The WLAN security info status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.1
apWlanSecurityLevel
This attribute indicates the security level of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.2
apWlanWepKeySize
This attribute indicates the wep key size of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.3
apWlanWepKeyFormat
This attribute indicates the wep key format of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.4
apWlanWepKey
This attribute indicates the wep key of the wireless network.
Remarks:
- hex64: 5 ASCII/10 hex characters
- hex128: 13 ASCII/26 hex characters
- hex152: 16 ASCII/32 hex characters
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.5
apWlanWepSharedKeyAuth
This attribute indicates the wep shared key authentication
of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.6
apWlan8021xVersion
This attribute indicates the 802.1X version of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.7
apWlan8021xReKeyPeriod
This attribute indicates the 802.1X re-keying period(in seconds) of the wireless network.
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.8
apWlanPsk
This attribute indicates the pre-shared key status of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.9
apWlanPassphrase
This attribute indicates the passphrase of the wireless network.
Remarks:
8 to 63 characters or 64 hex characters.
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.2.1.10

apWlanRadiusConfigTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.3 · 1 row entry · 11 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanRadiusConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanRadiusConfigTable' 
WLAN security info table.
apWlanRadiusConfigEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.3.1
An entry in the apWlanRadiusConfigTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanRadiusRowControl
The WLAN radius status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.1
apWlanRadiusPrimaryHost
IP address of the Primary radius account server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.2
apWlanRadiusPrimarySecret
Password used by the ap to connect to the Primary radius account server.
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.3
apWlanRadiusPrimaryAuthPort
Port number of the Primary radius account server.
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.4
apWlanRadiusPrimaryAcctPort
Account port number of the Primary radius account server.
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.5
apWlanRadiusSecondaryHost
IP address of the Secondary radius account server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.6
apWlanRadiusSecondarySecret
Password used by the ap to connect to the Secondary radius account server.
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.7
apWlanRadiusSecondaryAuthPort
Port number of the Secondary radius account server.
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.8
apWlanRadiusSecondaryAcctPort
Account port number of the Secondary radius account server.
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.9
apWlanRadiusMaxRetransmission
Maximum retransmit limit of the radius account server.
Default is 3
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.10
apWlanRadiusRequestInterval
Request interval(seconds) of the radius account server.
Default is 3 seconds
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.3.1.11

apWlanGuestProtectConfigTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanGuestProtectConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanGuestProtectConfigTable' 
WLAN guest protect info table.
apWlanGuestProtectConfigEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.4.1.1
An entry in the apWlanGuestProtectConfigTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanGuestProtectRowControl
The WLAN guest protect status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.4.1.1.1
apWlanBlockPrivateIp
This attribute indicates the block private ip address status
of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.1.1.2
apWlanBlockCustomSubnet
This attribute indicates the enable status of the block custom subnet
of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.1.1.3
apWlanBlockExcept
This attribute indicates the enable status of the block except subnet
of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.1.1.4
apWlanFireWallMode
This attribute indicates the bfirewall mode
of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.1.1.5

apWlanBlockCustomSubnetTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.4.2 · 1 row entry · 3 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanBlockCustomSubnetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanBlockCustomSubnetTable' 
WLAN block guest protect info table.
apWlanBlockCustomSubnetEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.4.2.1
An entry in the apWlanBlockCustomSubnetTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanBlockSubnetIndex
This attribute indicates the WLAN custom subnet no
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27662.200.1.1.4.2.4.2.1.1
apWlanBlockCustomSubnetRowControl
The WLAN guest protect info status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.4.2.1.2
apWlanBlockCustomSubnetList
This attribute indicates block custom subnet of the wireless network.
Input format:
xxx.xxx.xxx.xxx or xxx.xxx.xxx.xxx/subnet_mask
xxx: 0 to 255
subnet_mask: 1 to 31
*** Please don 't enter duplicate subnet in same wire…
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.2.1.3

apWlanBlockExceptListTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.4.3 · 1 row entry · 3 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanBlockExceptListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanBlockExceptListTable' 
WLAN block guest protect info table.
apWlanBlockExceptListEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.4.3.1
An entry in the apWlanBlockExceptListTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanBlockExceptSubnetIndex
This attribute indicates the WLAN block except subnet no
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27662.200.1.1.4.2.4.3.1.1
apWlanBlockExceptListRowControl
The WLAN guest protect info status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.4.3.1.2
apWlanBlockExceptList
This attribute indicates block custom subnet of the wireless network.
Input format:
xxx.xxx.xxx.xxx or xxx.xxx.xxx.xxx/subnet_mask
xxx: 0 to 255
subnet_mask: 1 to 31
*** Please don 't enter duplicate subnet in same wire…
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.3.1.3

apWlanFireWallExceptListTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.4.4 · 1 row entry · 7 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanFireWallExceptListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanFireWallExceptListTable' 
WLAN Firewall Exception List Table.
apWlanFireWallExceptListEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.4.4.1
An entry in the apWlanFireWallExceptListTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanFireWallExceptIndex
This attribute indicates the firewall exception list index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27662.200.1.1.4.2.4.4.1.1
apWlanFireWallExceptRowControl
This attribute indicates the firewall exception list index.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.4.4.1.2
apWlanFireWallExceptName
This attribute indicates the firewall exception list name.
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.4.1.3
apWlanFireWallExceptType
This attribute indicates the firewall exception list type.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.4.1.4
apWlanFireWallExceptPortType
This attribute indicates the firewall exception port type.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.4.1.5
apWlanFireWallExceptAppServiceType
This attribute indicates the firewall exception application/service type.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.4.1.6
apWlanFireWallExceptItem
This attribute indicates the firewall exception list item.
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.4.4.1.7

apWlanBandwidthControlConfigTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.5 · 1 row entry · 6 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanBandwidthControlConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanBandwidthControlConfigTable' 
WLAN block bandwidth control info table.
apWlanBandwidthControlConfigEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.5.1
An entry in the apWlanBandwidthControlConfigTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanBandwidthControlConfigRowControl
The WLAN bandwidth control info status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.5.1.1
apWlanBandwidthControl
This attribute indicates bandwidth control status of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.5.1.2
apWlanBandwidthUpstream
This attribute indicates bandwidth upstream of the wireless network.
Remarks:
Unlimited: 0
kbps: 2 to 55296
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.5.1.3
apWlanBandwidthDownstream
This attribute indicates bandwidth downstream of the wireless network.
Remarks:
Unlimited: 0
kbps: 2 to 55296
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.5.1.4
apWlanClientBandwidthUpstream
This attribute indicates client bandwidth upstream of the wireless network.
Remarks:
Unlimited: 0
kbps: 2 to 55296
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.5.1.5
apWlanClientBandwidthDownstream
This attribute indicates client bandwidth downstream of the wireless network.
Remarks:
Unlimited: 0
kbps: 2 to 55296
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.5.1.6

apWlanClientControlConfigTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.6.1 · 1 row entry · 3 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanClientControlConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanClientControlConfigTable' 
WLAN client control info table.
apWlanClientControlConfigEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.6.1.1
An entry in the apWlanClientControlConfigTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanClientControlConfigControl
The WLAN client control info status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.6.1.1.1
apWlanMaxClient
This attribute indicates the max client limit
of the wireless network.
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.6.1.1.2
apWlanAcl
This attribute indicates the mac filter type
of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.6.1.1.3

apWlanAclListTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.6.2 · 1 row entry · 3 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanAclListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanAclListTable' 
WLAN block guest protect info table.
apWlanAclListEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.6.2.1
An entry in the apWlanAclListTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanAclMacIndex
This attribute indicates the WLAN access control local mac index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27662.200.1.1.4.2.6.2.1.1
apWlanAclListRowControl
The WLAN guest protect info status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.6.2.1.2
apWlanAclList
This field should indicate an MAC address entry in the
access control local database.
Remarks:
Input format:
0xXX 0xXX 0xXX 0xXX 0xXX 0xXX OR XX:XX:XX:XX:XX:XX OR XX-XX-XX-XX-XX-XX
(examples: 0xab 0xcd 0xef 0x01 0x02 0x…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.27662.200.1.1.4.2.6.2.1.3

apWlanDhcpConfigTable

table
.1.3.6.1.4.1.27662.200.1.1.4.2.7 · 1 row entry · 13 columns
Open in standard view
Uses the peplink variant from /opt/observium/mibs/peplink.
Command help
Walk apWlanDhcpConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AP-WLAN' -M '/opt/observium/mibs/peplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AP-WLAN::apWlanDhcpConfigTable' 
WLAN block guest protect info table.
apWlanDhcpConfigEntry row .1.3.6.1.4.1.27662.200.1.1.4.2.7.1
An entry in the apWlanDhcpConfigTable.
Indexes
No indexes recorded
Column Syntax OID
apWlanDhcpConfigRowControl
The WLAN dhcp info status.
Supported values:
active(1) - valid entry
notReady(3) - non-valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.1
apWlanDhcpServerType
This attribute indicates dhcp server type
of the wireless network.
Enumerationr/w .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.2
apWlanDhcpRelayServer
This attribute indicates dhcp server ip address
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.3
apWlanDhcpServerStartRange
This attribute indicates dhcp server ip start range
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.4
apWlanDhcpServerStopRange
This attribute indicates dhcp server ip stop range
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.5
apWlanDhcpServerSubnetMask
This attribute indicates dhcp server subnet mask
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.6
apWlanDhcpServerBroadcast
This attribute indicates dhcp server broadcast address
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.7
apWlanDhcpServerGateway
This attribute indicates dhcp server gateway
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.8
apWlanDhcpServerDns1
This attribute indicates the first DNS server
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.9
apWlanDhcpServerDns2
This attribute indicates the second DNS server
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.10
apWlanDhcpServerDns3
This attribute indicates the third DNS server
of the wireless network.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.11
apWlanDhcpDomain
This attribute indicates the dhcp domain
of the wireless network.
OctetStringr/w .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.12
apWlanDhcpRelease
This attribute indicates the dhcp lease time(seconds)
of the wireless network.
Default value is 86400
Integer32r/w .1.3.6.1.4.1.27662.200.1.1.4.2.7.1.13