ALVARION-DOT11-WLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
40
Rows
40
Columns
282

brzaccVLCountryDependentParamsTable

table
.1.3.6.1.4.1.12394.1.1.1.18.2 · 1 row entry · 11 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLCountryDependentParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLCountryDependentParamsTable' 
Applicable to all units. A table of country dependent parameters.
brzaccVLCountryDependentParameterEntry row .1.3.6.1.4.1.12394.1.1.1.18.2.1
Applicable to all units.
An entry in the Country Dependent Parameters table.
Indexes
Column Syntax OID
brzaccVLCountryDependentParameterTableIdx
Applicable to all units.
The sub-band ID of the entry in the Country Dependent
Parameters table. Serves also as index for the table entry.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.1
brzaccVLCountryDependentParameterFrequencies
Applicable to all units.
The frequencies included in the applicable sub-band entry.
DisplayString .1.3.6.1.4.1.12394.1.1.1.18.2.1.2
brzaccVLAllowedBandwidth
Applicable to all units.
The bandwidth when using the applicable the sub-band.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.3
brzaccVLRegulationMaxTxPowerAtAntennaPort
Applicable to all units.
The maximum allowed Tx power when using the applicable sub-band.
A RegulationMaxTxPowerAtAntennaPort of 255, means no limit
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.4
brzaccVLRegulationMaxEIRP
Applicable to all units.
The maximum Tx EIRP
when using the applicable sub-band.
A Regulation Max EIRP of 0, means no limit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.5
brzaccVLMinModulationLevel
Applicable to all units.
The minimum supported modulation level.
Enumeration
Enumerated Values:
1level1
2level2
3level3
4level4
5level5
6level6
7level7
8level8
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.6
brzaccVLMaxModulationLevel
Applicable to all units.
The maximum supported modulation level.
Enumeration
Enumerated Values:
1level1
2level2
3level3
4level4
5level5
6level6
7level7
8level8
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.7
brzaccVLBurstModeSupport
Applicable to all units.
The supported Burst Mode Option.
Enumeration
Enumerated Values:
1supported
2notSupported
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.8
brzaccVLMaximumBurstDuration
Applicable to all units.
Applicable only if Burst Mode Option is supported.
The maximum supported burst duration.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.9
brzaccVLDfsSupport
Applicable to AU/BU only.
The supported Dfs Option.
Enumeration
Enumerated Values:
1supported
2notSupported
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.10
brzaccVLMinimumHwRevision
Applicable to all units.
The Minimum HW Revision needed to support the country code.
Enumeration
Enumerated Values:
1hwRevisionA
2hwRevisionB
3hwRevisionC
4hwRevisionD
5hwRevisionE
6hwRevisionF
7hwRevisionG
255na
 .1.3.6.1.4.1.12394.1.1.1.18.2.1.11

brzaccVLThresholdTable

table
.1.3.6.1.4.1.12394.1.1.2.17.2 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLThresholdTable' 
Applicable to all units with SW version 6.0 and higher, except AU. 
A table with the settings for Threshold mode
brzaccVLThresholdTableEntry row .1.3.6.1.4.1.12394.1.1.2.17.2.1
Applicable to all units with SW version 6.0 and higher, except AU.
An entry in the ThresholdTable.
Indexes
Column Syntax OID
brzaccVLThresholdLEDnum
Applicable to all units with SW version 6.0 and higher, except AU.
The LED position and index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.12394.1.1.2.17.2.1.1
brzaccVLThresholdLEDtype
Applicable to all units with SW version 6.0 and higher, except AU.
The type of measurement of the LED
Enumerationr/w
Enumerated Values:
1typeDisabled
2typeRSSI
3typeCRC
4typeSNR
5typeAverageModulation
 .1.3.6.1.4.1.12394.1.1.2.17.2.1.2
brzaccVLThresholdLEDmode
Applicable to all units with SW version 6.0 and higher, except AU.
The condition to turn the LED on.
Enumerationr/w
Enumerated Values:
1equalOrLower
2equalOrHigher
3equal
 .1.3.6.1.4.1.12394.1.1.2.17.2.1.3
brzaccVLThresholdLEDtarget
Applicable to all units with SW version 6.0 and higher, except AU.
The target value, depending on LED type,
from brzaccVLThresholdLEDtype above.
Integer32r/w
Constraints:
range: -108-100
 .1.3.6.1.4.1.12394.1.1.2.17.2.1.4

mngIpFilterTable

table
.1.3.6.1.4.1.12394.1.1.3.3 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk mngIpFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::mngIpFilterTable' 
Starting with version 5.0, this is deprecated. Use newMngIpFilterTable instead.
Applicable to all units.  
A Management IP Filter Table of up to 3 IP addresses 
of devices that are authorized to access the unit 
for management purposes.
mngIpFilterEntry row .1.3.6.1.4.1.12394.1.1.3.3.1
Applicable to all units.
A Management IP Filter Table entry.
Indexes
Column Syntax OID
brzaccVLNwMngIpAddress
Applicable to all units.
An IP address in the Management IP Filter Table.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.3.1.1
brzaccVLNwMngIpTableIdx
Applicable to all units.
A table index for an entry in the Management IP Filter
Table.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.12394.1.1.3.3.1.2

mngTrapTable

table
.1.3.6.1.4.1.12394.1.1.3.7 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk mngTrapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::mngTrapTable' 
Starting with version 5.0, this is deprecated. Use newMngTrapTable instead.
Applicable to all units.  
A Management Trap Table of up to 10 IP addresses of 
stations to send traps to.
mngTrapEntry row .1.3.6.1.4.1.12394.1.1.3.7.1
Applicable to all units.
A Management Trap Table entry.
Indexes
Column Syntax OID
brzaccVLNwMngTrapCommunity
Applicable to all units.
The trap community associated with the applicable
entry in the Management Trap Table.
Up to 14 printable case sensitive ASCII characters.
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.12394.1.1.3.7.1.1
brzaccVLNwMngTrapAddress
Applicable to all units.
An IP address in the Management Trap Table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.7.1.2
brzaccVLNwTrapTableIdx
Applicable to all units.
Tables Index for an entry in the Management Trap Table.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.12394.1.1.3.7.1.3

brzaccVLMngIpRangesTable

table
.1.3.6.1.4.1.12394.1.1.3.10 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLMngIpRangesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLMngIpRangesTable' 
Starting with version 5.0, this is deprecated. Use brzaccVLNewMngIpRangesTable instead.
Applicable to all units.  
Table of Management IP Address Ranges
brzaccVLMngIpRangeEntry row .1.3.6.1.4.1.12394.1.1.3.10.1
Applicable to all units.
A Management IP Address Ranges Table entry
Indexes
Column Syntax OID
brzaccVLMngIpRangeIdx
Applicable to all units.
Index of an entry in the Management IP Address Ranges Table
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.12394.1.1.3.10.1.1
brzaccVLMngIpRangeFlag
Applicable to all units.
Defines the method of defining the range:
Using Start & End Address( rangeDefinedByStartEndAddr ),
or using Start Address and Mask ( rangeDefinedByStartAddrSubNetMask ).
Enumerationr/w
Enumerated Values:
1rangeDefinedByStartEndAddr
2rangeDefinedByStartAddrMask
 .1.3.6.1.4.1.12394.1.1.3.10.1.2
brzaccVLMngIpRangeStart
Applicable to all units.
Start Address of the range
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.10.1.3
brzaccVLMngIpRangeEnd
Applicable to all units.
End Address of the range.
Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartEndAddr
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.10.1.4
brzaccVLMngIpRangeMask
Applicable to all units.
End Address of the range.
Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartAddrMask
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.10.1.5

brzaccVLErrHandlingTable

table
.1.3.6.1.4.1.12394.1.1.3.14.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLErrHandlingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLErrHandlingTable'
brzaccVLErrHandlingEntry row .1.3.6.1.4.1.12394.1.1.3.14.1.2.1
Indexes
Column Syntax OID
brzaccVLErrHandlingNMSId
 Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.1
brzaccVLErrHandlingRequestId
 Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.2
brzaccVLErrHandlingErrorCode
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.3
brzaccVLErrHandlingParameter1
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.4
brzaccVLErrHandlingParameter2
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.5
brzaccVLErrHandlingParameter3
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.6
brzaccVLErrHandlingParameter4
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.7
brzaccVLErrHandlingParameter5
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.1.2.1.8

brzaccVLTrapHistoryTable

table
.1.3.6.1.4.1.12394.1.1.3.14.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLTrapHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLTrapHistoryTable' 
Applicable to AU/BU only.
This table contains the last 1024 traps generated by the unit.
brzaccVLTrapHistoryEntry row .1.3.6.1.4.1.12394.1.1.3.14.2.2.1
Applicable to AU/BU only.
An entry in Trap History Table.
Indexes
Column Syntax OID
brzaccVLTrapHistorySequenceNumber
Applicable to AU/BU only.
Sequence number of the trap.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.1
brzaccVLTrapType
Applicable to AU/BU only.
It contains the trap type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.2
brzaccVLTrapMacAddrParam
Applicable to AU/BU only.
It contains the MAC Address of the trap if the trap
type requires this field, otherwise it contains the NULL
MAC Address.
MacAddress
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.3
brzaccVLTrapIntParam1
Applicable to AU/BU only.
It contains the first variable of integer type for the trap.
If from the trap definition this variable is not applicable
it will be 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.4
brzaccVLTrapIntParam2
Applicable to AU/BU only.
It contains the second variable of integer type for the trap.
If from the trap definition this variable is not applicable
it will be 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.5
brzaccVLTrapIntParam3
Applicable to AU/BU only.
It contains the third variable of integer type for the trap.
If from the trap definition this variable is not applicable
it will be 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.6
brzaccVLTrapStrParam
Applicable to AU/BU only.
It contains the string variable of the trap if this variable exists
for that trap, otherwise it will contain the empty string.
DisplayString .1.3.6.1.4.1.12394.1.1.3.14.2.2.1.7

newMngIpFilterTable

table
.1.3.6.1.4.1.12394.1.1.3.15 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk newMngIpFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::newMngIpFilterTable' 
Applicable to all units.  
A Management IP Filter Table of up to 10 IP addresses 
of devices that are authorized to access the unit 
for management purposes.
newMngIpFilterEntry row .1.3.6.1.4.1.12394.1.1.3.15.1
Applicable to all units.
A Management IP Filter Table entry.
Indexes
Column Syntax OID
brzaccVLNewNwMngIpAddress
Applicable to all units.
An IP address in the Management IP Filter Table.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.15.1.1
brzaccVLNewNwMngIpAddressCommand
Applicable to all units.
Supports only active(1), createAndGo(4) and destroy(6).
A command for an entry in the Management IP Filter
Table.
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.12394.1.1.3.15.1.2

newMngTrapTable

table
.1.3.6.1.4.1.12394.1.1.3.16 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk newMngTrapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::newMngTrapTable' 
Applicable to all units.  
A Management Trap Table of up to 10 IP addresses of 
stations to send traps to.
newMngTrapEntry row .1.3.6.1.4.1.12394.1.1.3.16.1
Applicable to all units.
A Management Trap Table entry.
Indexes
Column Syntax OID
brzaccVLNewNwMngTrapCommunity
Applicable to all units.
The trap community associated with the applicable
entry in the Management Trap Table.
Up to 14 printable case sensitive ASCII characters.
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.12394.1.1.3.16.1.1
brzaccVLNewNwMngTrapAddress
Applicable to all units.
An IP address in the Management Trap Table entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.16.1.2
brzaccVLNewNwTrapCommand
Applicable to all units.
Supports only active(1), createAndGo(4) and destroy(6).
A command for an entry in the Management Trap Table.
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.12394.1.1.3.16.1.3

brzaccVLNewMngIpRangesTable

table
.1.3.6.1.4.1.12394.1.1.3.17 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLNewMngIpRangesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLNewMngIpRangesTable' 
Applicable to all units.  
Table of Management IP Address Ranges
brzaccVLNewMngIpRangeEntry row .1.3.6.1.4.1.12394.1.1.3.17.1
Applicable to all units.
A Management IP Address Ranges Table entry
Indexes
Column Syntax OID
brzaccVLNewMngIpRangeStart
Applicable to all units.
Start Address of the range
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.17.1.1
brzaccVLNewMngIpRangeEnd
Applicable to all units.
End Address of the range.
Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartEndAddr
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.17.1.2
brzaccVLNewMngIpRangeMask
Applicable to all units.
End Address of the range.
Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartAddrMask
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.3.17.1.3
brzaccVLNewMngIpRangeFlag
Applicable to all units.
Defines the method of defining the range:
Using Start & End Address( rangeDefinedByStartEndAddr ),
or using Start Address and Mask ( rangeDefinedByStartAddrSubNetMask ).
Enumerationr/w
Enumerated Values:
1rangeDefinedByStartEndAddr
2rangeDefinedByStartAddrMask
 .1.3.6.1.4.1.12394.1.1.3.17.1.4
brzaccVLNewMngIpRangeCommand
Applicable to all units.
Row Status in the New Management IP Address Ranges Table
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.12394.1.1.3.17.1.5

brzaccVLVlanForwardingTable

table
.1.3.6.1.4.1.12394.1.1.5.1.4.2 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLVlanForwardingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLVlanForwardingTable' 
Starting with version 5.0, this is deprecated. Use brzaccVLNewVlanForwardingTable instead.
Applicable to all units.  
A VLAN Forwarding Table of up to 20 VLAN IDs of devices 
to which data frames are forwarded when VLAN Forwarding 
is Enabled. (applicable in Trunk and Service Provider links only).
brzaccVLVlanForwardingEntry row .1.3.6.1.4.1.12394.1.1.5.1.4.2.1
Applicable to all units.
A VLAN Forwarding Table entry. (applicable in Trunk and Service Provider
links only).
Indexes
Column Syntax OID
brzaccVLVlanForwardingTableIdx
Applicable to all units.
A read only table index for a VLAN entry in the VLAN
Forwarding Table.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.12394.1.1.5.1.4.2.1.1
brzaccVLVlanIdForwarding
Applicable to all units.
The list of VLAN ID's in the VLAN ID Forwarding Table.
To Remove a VLAN ID - SET the corresponding entry to 0.
To Add a new VLAN ID SET an entry which is currently 0.
Range : 0 to 4094
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.5.1.4.2.1.2

brzaccVLNewVlanForwardingTable

table
.1.3.6.1.4.1.12394.1.1.5.1.4.3 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLNewVlanForwardingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLNewVlanForwardingTable' 
Applicable to all units.  
A VLAN Forwarding Table of up to 20 VLAN IDs of devices 
to which data frames are forwarded when VLAN Forwarding 
is Enabled. (applicable in Trunk and Service Provider links only).
brzaccVLNewVlanForwardingEntry row .1.3.6.1.4.1.12394.1.1.5.1.4.3.1
Applicable to all units.
A VLAN Forwarding Table entry. (applicable in Trunk and Service Provider
links only).
Indexes
Column Syntax OID
brzaccVLNewVlanIdForwarding
Applicable to all units.
The list of VLAN ID's in the VLAN ID Forwarding Table.
Range : 1 to 4094
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.12394.1.1.5.1.4.3.1.1
brzaccVLNewVlanForwardingCommand
Applicable to all units.
Row Status in the New VLAN Forwarding Table.
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.12394.1.1.5.1.4.3.1.2

brzaccVLVlanRelayingTable

table
.1.3.6.1.4.1.12394.1.1.5.1.5.2 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLVlanRelayingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLVlanRelayingTable' 
Starting with version 5.0, this is deprecated. Use brzaccVLNewVlanRelayingTable instead.
Applicable to AU only. 
		 Not applicable to BreezeNET-B products.
A VLAN Relaying Table of up to 20 VLAN IDs of devices 
to which data frames are relayed when VLAN Relaying is 
Enabled. (applicable in Trunk and Service Provider links only).
brzaccVLVlanRelayingEntry row .1.3.6.1.4.1.12394.1.1.5.1.5.2.1
Applicable to AU only.
Not applicable to BreezeNET-B products.
A VLAN Relaying Table entry. (applicable in Trunk and Service
Provider links only).
Indexes
Column Syntax OID
brzaccVLVlanRelayingTableIdx
Applicable to AU only.
Not applicable to BreezeNET-B products.
A table index for a VLAN entry in the VLAN
Relaying Table.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.12394.1.1.5.1.5.2.1.1
brzaccVLVlanIdRelaying
Applicable to AU only.
Not applicable to BreezeNET-B products.
The list of VLAN ID's in the VLAN ID Relaying Table.
To Remove a VLAN ID - SET the corresponding entry to 0.
To Add a new VLAN ID SET an entry which is c…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.5.1.5.2.1.2

brzaccVLNewVlanRelayingTable

table
.1.3.6.1.4.1.12394.1.1.5.1.5.3 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLNewVlanRelayingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLNewVlanRelayingTable' 
Applicable to AU only. 
Not applicable to BreezeNET-B products.
A VLAN Relaying Table of up to 20 VLAN IDs of devices 
to which data frames are relayed when VLAN Relaying is 
Enabled. (applicable in Trunk and Service Provider links only).
brzaccVLNewVlanRelayingEntry row .1.3.6.1.4.1.12394.1.1.5.1.5.3.1
Applicable to AU only.
Not applicable to BreezeNET-B products.
A VLAN Relaying Table entry. (applicable in Trunk and Service
Provider links only).
Indexes
Column Syntax OID
brzaccVLNewVlanIdRelaying
Applicable to AU only.
Not applicable to BreezeNET-B products.
The list of VLAN ID's in the VLAN ID Relaying Table.
Range: 1 to 4094.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.12394.1.1.5.1.5.3.1.1
brzaccVLNewVlanRelayingTableCommand
Applicable to AU only.
Not applicable to BreezeNET-B products.
Supports only active(1), createAndGo(4) and destroy(6).
A command to create or destroy a VLAN entry in the VLAN
Relaying Table.
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.12394.1.1.5.1.5.3.1.2

brzaccVLVlanExtendedAccessRulesTable

table
.1.3.6.1.4.1.12394.1.1.5.1.8 · 1 row entry · 7 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLVlanExtendedAccessRulesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLVlanExtendedAccessRulesTable' 
Starting with version 6.0.
Available for SU/RB units only.
An 8-VLAN Rule Table for Extended Access Link.
brzaccVLVlanExtendedAccessRulesEntry row .1.3.6.1.4.1.12394.1.1.5.1.8.1
Starting with version 6.0.
Available for SU/RB units only.
An entry in VLAN Rule Table for Extended Access Link.
Indexes
Column Syntax OID
brzaccVLVlanExtendedAccessRulesTableIdx
Starting with version 6.0.
Available for SU/RB units only.
A table index for a VLAN Rule entry/rule in the
VLAN Rule Table for Extended Access Link.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.12394.1.1.5.1.8.1.1
brzaccVLVlanExtendedAccessRuleId
Starting with version 6.0.
Available for SU/RB units only.
Identifies the VLAN Rule type of an entry/rule,
in VLAN Rule Table for Extended Access Link.
Enumerationr/w
Enumerated Values:
1noRule
2sourceMacAddress
3destinationMacAddress
4sourceIpAddress
5destinationIpAddress
6sourceUdpPort
7destinationUdpPort
8sourceTcpPort
9destinationTcpPort
10ipProtocol
11default
 .1.3.6.1.4.1.12394.1.1.5.1.8.1.2
brzaccVLVlanExtendedAccessRuleVlanId
Starting with version 6.0.
Available for SU/RB units only.
Identifies the data VLAN ID of an entry/rule,
in VLAN Rule Table for Extended Access Link.
Range: 1-4094. Value zero is returned if
no rule defined for this ent…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.12394.1.1.5.1.8.1.3
brzaccVLVlanExtendedAccessRulePriority
Starting with version 6.0.
Applicable to SU/RB units only.
Identifies the Priority tagging for data frames, for an entry/rule,
in VLAN Rule Table for Extended Access Link.
Range: 0-7. Value 255 is returned if
no rule d…
Integer32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.12394.1.1.5.1.8.1.4
brzaccVLVlanExtendedAccessRuleMulticastAllowed
Starting with version 6.0.
Available for SU/RB units only.
Determine if Multicast frames are tagged and sent on wireless LAN.
Option for an entry/rule, in VLAN Rule Table for Extended Access Link.
Value 255 is returned …
Enumerationr/w
Enumerated Values:
1allowed
2notAllowed
255na
 .1.3.6.1.4.1.12394.1.1.5.1.8.1.5
brzaccVLVlanExtendedAccessRuleOpType
Starting with version 6.0.
Available for SU/RB units only.
Identifies the VLAN Operand type of an entry/rule,
in VLAN Rule Table for Extended Access Link.
Range: 1-4. Value 255 is returned if
no rule or default rule def…
Enumerationr/w
Enumerated Values:
1value
2range
3mask
4enumeration
255na
 .1.3.6.1.4.1.12394.1.1.5.1.8.1.6
brzaccVLVlanExtendedAccessRuleOperands
Starting with version 6.0.
Available for SU/RB units only.
The VLAN Operand list of an entry/rule,
in VLAN Rule Table for Extended Access Link.
Operand list may be one of the following:
v1-v2 : range (v1 - v2), v1…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.12394.1.1.5.1.8.1.7

brzaccVLMacAddressDenyListTable

table
.1.3.6.1.4.1.12394.1.1.5.10.1 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLMacAddressDenyListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLMacAddressDenyListTable' 
Starting with version 5.0, this is deprecated. Use brzaccVLNewMacAddressDenyListTable instead.
Applicable to AU only. 
Not applicable to BreezeNET-B units.                                   
A list of up to 100 MAC Addresses of SUs.
If brzaccVLMacAddressDenyListAction is set to denyList, 
these are SUs that are not allowed to transfer data 
to the AU. 
If brzaccVLMacAddressDenyListAction is set to allowList, 
only these SUs are allowed to transfer data to the AU.
brzaccVLMacAddressDenyListEntry row .1.3.6.1.4.1.12394.1.1.5.10.1.1
Applicable to AU only.
Not applicable to BreezeNET-B units.
An entry in the Mac Address Deny List Table.
Indexes
Column Syntax OID
brzaccVLMacAddressDenyListTableIdx
Applicable to AU only.
Not applicable to BreezeNET-B units.
A read only table index for a MAC Address entry
in the Mac Address Deny List Table. Range: 1 to 100.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.12394.1.1.5.10.1.1.1
brzaccVLMacAddressDenyListId
Applicable to AU only.
Not applicable to BreezeNET-B units.
The list of MAC Addresses in the Mac Address Deny
List Table.
To Remove a MAC Address - SET the corresponding entry
to 0. …
MacAddressr/w
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.5.10.1.1.2

brzaccVLNewMacAddressDenyListTable

table
.1.3.6.1.4.1.12394.1.1.5.10.6 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLNewMacAddressDenyListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLNewMacAddressDenyListTable' 
Applicable to AU only. 
Not applicable to BreezeNET-B units.                                   
A list of up to 100 MAC Addresses of SUs.
If brzaccVLMacAddressDenyListAction is set to denyList, 
these are SUs that are not allowed to transfer data 
to the AU. 
If brzaccVLMacAddressDenyListAction is set to allowList, 
only these SUs are allowed to transfer data to the AU.
brzaccVLNewMacAddressDenyListEntry row .1.3.6.1.4.1.12394.1.1.5.10.6.1
Applicable to AU only.
Not applicable to BreezeNET-B units.
An entry in the Mac Address Deny List Table.
Indexes
Column Syntax OID
brzaccVLNewMacAddressDenyListId
Applicable to AU only.
Not applicable to BreezeNET-B units.
The list of MAC Addresses in the Mac Address Deny List Table.
MacAddress
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.5.10.6.1.1
brzaccVLNewMacAddressDenyListCommand
Applicable to AU only.
Not applicable to BreezeNET-B units.
Supports only active(1), createAndGo(4) and destroy(6).
Used for add or destroy entry.
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.12394.1.1.5.10.6.1.2

brzaccVLTransmitPowerTable

table
.1.3.6.1.4.1.12394.1.1.6.5 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLTransmitPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLTransmitPowerTable' 
Applicable to all units.
A table of transmit power parameters.
brzaccVLTransmitPowerEntry row .1.3.6.1.4.1.12394.1.1.6.5.1
Applicable to all units.
An entry in the Transmit Power Table.
Indexes
Column Syntax OID
brzaccVLTransmitPowerIdx
Applicable to all units.
An index of an entry in the Transmit Power Table.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.12394.1.1.6.5.1.1
brzaccVLApplicableModulationLevel
Applicable to all units.
The applicable modulation level for an entry in the Transmit Power Table.
Level 8 is not applicable to units with HW revision A.
Enumeration
Enumerated Values:
1level1to5
2level6
3level7
4level8
 .1.3.6.1.4.1.12394.1.1.6.5.1.2
brzaccVLMaximumTxPowerRange
Applicable to all units.
The allowed range for the brzaccVLTxPower parameter at the
applicable modulation level . Range: -10 to the maximum allowed
power level at the applicable modulation level , in dBm.
DisplayString .1.3.6.1.4.1.12394.1.1.6.5.1.3
brzaccVLTxPower
Applicable to all units.
Read-only for units with SW version 4.0 and higher.
In AU/BU: The transmit power in dBm defined for the applicable rate.
In SU/RB: If ATPC is disabled, this is the transmit power in dBm
…
DisplayStringr/w .1.3.6.1.4.1.12394.1.1.6.5.1.4
brzaccVLCurrentTxPower
Applicable to SU/RB.
The actual transmit power in dBm for the applicable rate.
Range: -17 to the maximum value defined by brzaccVLMaximumTxPowerRange
for the applicable modulation level.
DisplayString .1.3.6.1.4.1.12394.1.1.6.5.1.5

brzaccVLMaximumTransmitPowerTable

table
.1.3.6.1.4.1.12394.1.1.6.6 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLMaximumTransmitPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLMaximumTransmitPowerTable' 
Applicable to SU/RB only.
A table of maximum transmit power parameters.
brzaccVLMaximumTransmitPowerEntry row .1.3.6.1.4.1.12394.1.1.6.6.1
Applicable to SU/RB only.
An entry in the Maximum Transmit Power Table.
Indexes
Column Syntax OID
brzaccVLMaximumTransmitPowerIdx
Applicable to SU/RB only.
An index of an entry in the Maximum Transmit Power Table.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.12394.1.1.6.6.1.1
brzaccVLMaxTxApplicableModulationLevel
Applicable to SU/RB only.
The applicable modulation level for an entry in the Maximum
Transmit Power Table.
Level 8 is not applicable to units with HW revision A.
Enumeration
Enumerated Values:
1level1to5
2level6
3level7
4level8
 .1.3.6.1.4.1.12394.1.1.6.6.1.2
brzaccVLDefinedMaximumTxPowerRange
Applicable to SU/RB only.
The allowed range for the brzaccVLMaxTxPower parameter at the
applicable modulation level .
Range: -10 to the maximum allowed power level at the applicable
modulation level , in dBm.
DisplayString .1.3.6.1.4.1.12394.1.1.6.6.1.3
brzaccVLMaxTxPower
Applicable to SU/RB only.
Read-only for units with SW version 4.0 and higher.
The maximum value that can be configured for the brzaccVLTxPower
parameter. This is also the maximum power level that can be reached
…
DisplayStringr/w .1.3.6.1.4.1.12394.1.1.6.6.1.4

brzaccVLNeighborAuTable

table
.1.3.6.1.4.1.12394.1.1.6.11.4 · 1 row entry · 20 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLNeighborAuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLNeighborAuTable' 
Applicable to SU/RB only. 
A table of data on neighboring AUs/BUs.
brzaccVLNeighborAuEntry row .1.3.6.1.4.1.12394.1.1.6.11.4.1
Applicable to SU/RB only.
An entry in the Neighbor AU/BU Table.
Indexes
Column Syntax OID
brzaccVLNeighborAuIdx
Applicable to SU/RB only.
An index of an entry in the Neighbor AU/BU Table.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.1
brzaccVLNeighborAuMacAdd
Applicable to SU/RB only.
A MAC address of an AU/BU in the Neighbor AU/BU Table.
MacAddress
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.2
brzaccVLNeighborAuESSID
Applicable to SU/RB only.
The ESSID of an AU/BU in the Neighbor AU/BU Table.
Accessible only with SNMP Write Community.
DisplayString .1.3.6.1.4.1.12394.1.1.6.11.4.1.3
brzaccVLNeighborAuSNR
Applicable to SU/RB only.
The received signal quality (SNR) in dB of an AU/BU
in the Neighbor AU/BU Table. If the returned value is 255
this means that the indication is not available.
Enumeration
Enumerated Values:
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.4
brzaccVLNeighborAuAssocLoadStatus
Applicable to SU/RB only.
Neighbor AU/BU association load status in the Neighbor
AU/BU Table.
Enumeration
Enumerated Values:
1full
2notFull
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.5
brzaccVLNeighborAuMark
Applicable to SU/RB only.
Neighbor AU/BU mark in the Neighbor AU/BU Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.6
brzaccVLNeighborAuHwRevision
Applicable to SU/RB only.
Neighbor AU/BU HW revision in the Neighbor AU/BU Table.
Enumeration
Enumerated Values:
1hwRevisionA
2hwRevisionB
3hwRevisionC
4hwRevisionD
5hwRevisionE
6hwRevisionF
7hwRevisionG
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.7
brzaccVLNeighborAuCountryCode
Applicable to SU/RB only.
Neighbor AU/BU supported country code in the Neighbor
AU/BU Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.8
brzaccVLNeighborAuSwVer
Applicable to SU/RB only.
Neighbor AU/BU SW version in the Neighbor
AU/BU Table.
DisplayString .1.3.6.1.4.1.12394.1.1.6.11.4.1.9
brzaccVLNeighborAuAtpcOption
Applicable to SU/RB only.
Neighbor AU/BU ATPC option configuration in the Neighbor
AU/BU Table.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.10
brzaccVLNeighborAuAdapModOption
Applicable to SU/RB only.
Neighbor AU/BU adaptive modulation option configuration
in the Neighbor AU/BU Table.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.11
brzaccVLNeighborAuBurstModeOption
Applicable to SU/RB only.
Neighbor AU/BU burst mode option configuration
in the Neighbor AU/BU Table.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.12
brzaccVLNeighborAuDfsOption
Applicable to SU/RB only.
Neighbor AU/BU DFS option configuration
in the Neighbor AU/BU Table.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.14
brzaccVLNeighborAuConcatenationOption
Applicable to SU/RB only.
Neighbor AU/BU concatenation option configuration
in the Neighbor AU/BU Table.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.15
brzaccVLNeighborAuLearnCountryCodeBySU
Applicable to SU only.
Starting with 4.0 is not applicable for BA4900 and BreezeNET B products.
Neighbor AU Learn Country Code by SU configuration
in the Neighbor AU Table.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.17
brzaccVLNeighborAuSecurityMode
Applicable to SU/RB only.
Neighbor AU/BU security mode configuration
in the Neighbor AU/BU Table.
Enumeration
Enumerated Values:
1wep
2aesOCB
3fips197
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.18
brzaccVLNeighborAuAuthOption
Applicable to SU/RB only.
Neighbor AU/BU authentication option configuration
in the Neighbor AU/BU Table.
Enumeration
Enumerated Values:
1openSystem
2sharedKey
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.19
brzaccVLNeighborAuDataEncyptOption
Applicable to SU/RB only.
Neighbor AU/BU data encryption option configuration
in the Neighbor AU/BU Table.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.20
brzaccVLNeighborAuPerSuDistanceLearning
Applicable to SU only.
Neighbor AU per SU distance learning option configuration
in the Neighbor AU Table.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.21
brzaccVLNeighborAuRSSI
Applicable to SU/RB only.
The Recieved Signal Strength Indication of an AU/BU
in the Neighbor AU/BU Table. If the returned value
is 255 this means that the indication is not available.
This value is given in dBm unit…
Enumeration
Enumerated Values:
255na
 .1.3.6.1.4.1.12394.1.1.6.11.4.1.22

brzaccVLFrequencySubsetTable

table
.1.3.6.1.4.1.12394.1.1.6.12.4 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLFrequencySubsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLFrequencySubsetTable' 
Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
		 The Frequency Subset Table that includes all frequencies from 
		 the selected Sub-band.
brzaccVLFrequencySubsetEntry row .1.3.6.1.4.1.12394.1.1.6.12.4.1
Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
An entry in the Frequency Subset Table.
Indexes
Column Syntax OID
brzaccVLFrequencySubsetTableIdx
Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
An index of an entry in the Frequency subset Table.
Integer32
Constraints:
range: 1-40
 .1.3.6.1.4.1.12394.1.1.6.12.4.1.1
brzaccVLFrequencySubsetFrequency
Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
Applicable to all units with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLFrequencySub…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.12.4.1.2
brzaccVLFrequencySubsetActive
Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
The status of an entry in the Frequency subset Table.
The frequency of an active entry will be included in the
final li…
Enumerationr/w
Enumerated Values:
1active
2notActive
 .1.3.6.1.4.1.12394.1.1.6.12.4.1.3
brzaccVLFrequencySubsetFrequencyNew
Applicable to all units.
Not applicable to SU/RB with SW version 4.0 and higher.
The frequency in MHz of an entry in the Frequency Subset table.
(Replaces brzaccVLFrequencySubsetFrequency to support a resolution
of 0…
DisplayString .1.3.6.1.4.1.12394.1.1.6.12.4.1.4

brzaccVLCurrentFrequencySubsetTable

table
.1.3.6.1.4.1.12394.1.1.6.12.6 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLCurrentFrequencySubsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLCurrentFrequencySubsetTable' 
Applicable to SU/RB and to AU/BU.
Not applicable to SU/RB with SW version 4.0 and higher.
		 The Current Frequency Subset table. In SU/RB it includes all 
		 frequencies that are currently used for scanning.
		 In AU/BU it includes all frequencies that can be used by the 
		 DFS mechanism (if applicable)
brzaccVLCurrentFrequencySubsetEntry row .1.3.6.1.4.1.12394.1.1.6.12.6.1
Applicable to SU/RB and to AU/BU.
An entry in the Current Frequency Subset Table.
Indexes
Column Syntax OID
brzaccVLCurrentFrequencySubsetTableIdx
Applicable to SU/RB and to AU/BU.
An index of an entry in the Current Frequency subset Table.
Not applicable to SU/RB with SW version 4.0 and higher.
Integer32
Constraints:
range: 1-40
 .1.3.6.1.4.1.12394.1.1.6.12.6.1.1
brzaccVLCurrentFrequencySubsetFrequency
Applicable to all units.
Not applicable to SU/RB with SW version 4.0 and higher.
Applicable to all units with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLCurrentFrequencySubse…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.12.6.1.2
brzaccVLCurrentFrequencySubsetFrequencyNew
Applicable to all units. Not applicable to SU/RB with SW version 4.0 and higher.
The frequency in MHz of an entry in the Current Frequency Subset table.
(Replaces brzaccVLCurrentFrequencySubsetFrequency to support a
…
DisplayString .1.3.6.1.4.1.12394.1.1.6.12.6.1.3

brzaccVLDFSRadarDetectionChannelsTable

table
.1.3.6.1.4.1.12394.1.1.6.12.11.7 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLDFSRadarDetectionChannelsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLDFSRadarDetectionChannelsTable' 
Applicable to AU/BU only. 
Applicable only when DFS option is on.
Displays the current channels defined in the sub-band and their radar 
detection status.
brzaccVLDFSRadarDetectionChannelsEntry row .1.3.6.1.4.1.12394.1.1.6.12.11.7.1
Applicable to AU/BU only.
An entry in the brzaccVLDFSRadarDetectionChannelsTable.
Indexes
Column Syntax OID
brzaccVLDFSChannelIdx
Applicable to AU/BU only. Read-only.
The index of the entry in the
brzaccVLDFSRadarDetectionChannelsTable.
Integer32
Constraints:
range: 1-40
 .1.3.6.1.4.1.12394.1.1.6.12.11.7.1.1
brzaccVLDFSChannelFrequency
Applicable to AU/BU with HW revision B and lower
(for units with HW revision C and higher replaced by
brzaccVLDFSChannelFrequency New to support a resolution
of 0.5 MHz).
The frequency in MHz of a channel in the DFS…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.12.11.7.1.2
brzaccVLDFSChannelRadarStatus
Applicable to AU/BU only.
The radar detection status of a channel in
brzaccVLDFSRadarDetectionChannelTable.
Enumeration
Enumerated Values:
1radarFree
2adjacentToRadar
3radarDetected
 .1.3.6.1.4.1.12394.1.1.6.12.11.7.1.3
brzaccVLDFSChannelFrequencyNew
Applicable to AU/BU. The frequency of a channel in the
DFS Radar Detection Channels Table.
(Replaces brzaccVLDFSChannelFrequency to support a
resolution of 0.5 MHz for units with HW revision C and higher).
DisplayString .1.3.6.1.4.1.12394.1.1.6.12.11.7.1.4

brzaccVLAutoSubBandFrequencySubsetTable

table
.1.3.6.1.4.1.12394.1.1.6.12.15.2 · 1 row entry · 6 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLAutoSubBandFrequencySubsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLAutoSubBandFrequencySubsetTable' 
Applicable to SU/RB with SW version 4.0 and higher. 
The Frequency Subset Table that includes all available 
sub-bands and all the frequencies in these sub-bands.
brzaccVLAutoSubBandFrequencySubsetEntry row .1.3.6.1.4.1.12394.1.1.6.12.15.2.1
Applicable to SU/RB with SW version 4.0 and higher.
An entry in the Frequency Subset Table.
Indexes
Column Syntax OID
brzaccVLAutoSubBandFrequencySubsetBandIdx
Applicable to SU/RB with SW version 4.0 and higher.
The index of the applicable Sub Band.
This is the Sub Band ID of the relevant entry in
the Country Dependent Parameters table.
Serves also as an index of the entry i…
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.1
brzaccVLAutoSubBandFrequencySubsetFrequencyIdx
Applicable to SU/RB with SW version 4.0 and higher.
The index of the applicable frequency in the
applicable Sub Band.
Serves also as an index of the entry in the
Frequency subset Table.
Integer32
Constraints:
range: 1-40
 .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.2
brzaccVLAutoSubBandFrequencySubsetActive
Applicable to SU/RB with SW version 4.0 and higher.
The status of an entry in the Auto Sub Band Frequency subset Table.
The frequency of an active entry will be included in the
final list of frequencies to be used for …
Enumerationr/w
Enumerated Values:
1active
2notActive
 .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.3
brzaccVLAutoSubBandFrequencySubsetFrequency
Applicable to SU/RB with SW version 4.0 and higher.
The frequency in MHz of the entry in the Auto Sub Band Frequency Subset table.
DisplayString .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.4
brzaccVLAutoSubBandFrequencySubsetBandwidth
Applicable to SU/RB with SW version 4.0 and higher.
The bandwidth in MHz of the entry in the Auto Sub Band Frequency Subset table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.5
brzaccVLAutoSubBandFrequencySubsetDFSStatus
Applicable to SU/RB with SW version 4.0 and higher.
The channel status of the entry in the Auto Sub Band Frequency Subset table.
Enumeration
Enumerated Values:
1radarFree
2adjacentToRadar
3radarDetected
 .1.3.6.1.4.1.12394.1.1.6.12.15.2.1.6

brzaccVLSpectrumAnalysisInformationTable

table
.1.3.6.1.4.1.12394.1.1.6.18.7 · 1 row entry · 11 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLSpectrumAnalysisInformationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLSpectrumAnalysisInformationTable' 
Applicable to all units.  
The spectrum analysis information table.
brzaccVLSpectrumAnalysisInformationEntry row .1.3.6.1.4.1.12394.1.1.6.18.7.1
Applicable to all units.
The spectrum analysis information table entry.
Indexes
Column Syntax OID
brzaccVLSpectrumAnalysisInformationTableIdx
Applicable to all units.
A read only table index for a Spectrum Analysis Information entry in the
Spectrum Analysis Information Table.
Integer32
Constraints:
range: 1-60
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.1
brzaccVLSpectrumAnalysisInformationChannel
Applicable to all units.
The channels in the Spectrum Analysis Information Table.
If the unit is currently under spectrum analysis the channels would
be those on which the analysis is currently performed.
If the unit…
DisplayString .1.3.6.1.4.1.12394.1.1.6.18.7.1.2
brzaccVLSpectrumAnalysisInformationSignalCount
Applicable to all units.
The number of signals (excluding OFDM frames) detected in the channel.
If the unit is currently under spectrum analysis the count would
be of the analysis that is currently performed.
If the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.3
brzaccVLSpectrumAnalysisInformationSignalSNR
Applicable to all units.
The approximate SNR of the signals (excluding OFDM frames)
detected in the channel.
If the unit is currently under spectrum analysis the SNR would
be of the analysis that is currently performed.…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.4
brzaccVLSpectrumAnalysisInformationSignalWidth
Applicable to all units.
The average width of the signals (excluding OFDM frames)
detected in the channel.
If the unit is currently under spectrum analysis the width would
be of the analysis that is currently perfor…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.5
brzaccVLSpectrumAnalysisInformationOFDMFrames
Applicable to all units.
The number of OFDM frames detected in the channel.
If the unit is currently under spectrum analysis the count would
be of the analysis that is currently performed.
If the unit is in normal m…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.6
brzaccVLSpectrumAnalysisInformationOFDMAvgSnr
Applicable to all units.
The average SNR of the OFDM frames detected in the channel.
If the unit is currently under spectrum analysis the average SNR would
be of the analysis that is currently performed.
If the unit…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.7
brzaccVLSpectrumAnalysisInformationAvgNoiseFloor
Applicable to all units.
The average Noise Floor detected in the channel.
If the unit is currently under spectrum analysis the average
Noise Floor would be of the analysis that is currently performed.
If the unit is…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.8
brzaccVLSpectrumAnalysisInformationMaxNoiseFloor
Applicable to all units.
The maximum Noise Floor detected in the channel.
If the unit is currently under spectrum analysis the maximum
Noise Floor would be of the analysis that is currently performed.
If the unit is…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.9
brzaccVLSpectrumAnalysisInformationSignalMaxSNR
Applicable to all units.
The maximum SNR of the signals (excluding OFDM frames)
detected in the channel.
If the unit is currently under spectrum analysis the maximum SNR would
be of the analysis that is currently per…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.10
brzaccVLSpectrumAnalysisInformationOFDMMaxSNR
Applicable to all units.
The maximum SNR of the OFDM frames detected in the channel.
If the unit is currently under spectrum analysis the maximum SNR would
be of the analysis that is currently performed.
If the unit…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.18.7.1.11

brzaccVLCountryCodeTable

table
.1.3.6.1.4.1.12394.1.1.6.25.2 · 1 row entry · 5 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLCountryCodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLCountryCodeTable' 
Applicable to all units.
brzaccVLCountryCodeEntry row .1.3.6.1.4.1.12394.1.1.6.25.2.1
Applicable to all units.
Indexes
Column Syntax OID
brzaccVLCCNumber
Applicable to all units.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.12394.1.1.6.25.2.1.1
brzaccVLCCName
Applicable to all units.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.12394.1.1.6.25.2.1.2
brzaccVLCCAuthenticationEncryptionSupport
Applicable to all units.
Enumeration
Enumerated Values:
1supported
2notSupported
 .1.3.6.1.4.1.12394.1.1.6.25.2.1.3
brzaccVLCCDataEncryptionSupport
Applicable to all units.
Enumeration
Enumerated Values:
1supported
2notSupported
 .1.3.6.1.4.1.12394.1.1.6.25.2.1.4
brzaccVLCCAESEncryptionSupport
Applicable to all units.
Enumeration
Enumerated Values:
1supported
2notSupported
 .1.3.6.1.4.1.12394.1.1.6.25.2.1.5

brzaccVLCCParamsTable

table
.1.3.6.1.4.1.12394.1.1.6.25.3 · 1 row entry · 12 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLCCParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLCCParamsTable' 
Applicable to all units. A table of country dependent parameters.
brzaccVLCCParamsEntry row .1.3.6.1.4.1.12394.1.1.6.25.3.1
Applicable to all units.
Indexes
Column Syntax OID
brzaccVLCCNumberIdx
Applicable to all units.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.1
brzaccVLCCParamsIndex
Applicable to all units.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.2
brzaccVLCCParamsFrequencies
Applicable to all units.
The frequencies included in the applicable sub-band entry.
DisplayString .1.3.6.1.4.1.12394.1.1.6.25.3.1.3
brzaccVLCCAllowedBandwidth
Applicable to all units.
The bandwidth when using the applicable the sub-band.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.4
brzaccVLCCRegulationMaxTxPowerAtAntennaPort
Applicable to all units.
The maximum allowed Tx power when using the applicable sub-band.
A RegulationMaxTxPowerAtAntennaPort of 255, means no limit
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.5
brzaccVLCCRegulationMaxEIRP
Applicable to all units.
The maximum Tx EIRP
when using the applicable sub-band.
A Regulation Max EIRP of 0, means no limit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.6
brzaccVLCCMinModulationLevel
Applicable to all units.
The minimum supported modulation level.
Enumeration
Enumerated Values:
1level1
2level2
3level3
4level4
5level5
6level6
7level7
8level8
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.7
brzaccVLCCMaxModulationLevel
Applicable to all units.
The maximum supported modulation level.
Enumeration
Enumerated Values:
1level1
2level2
3level3
4level4
5level5
6level6
7level7
8level8
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.8
brzaccVLCCBurstModeSupport
Applicable to all units.
The supported Burst Mode Option.
Enumeration
Enumerated Values:
1supported
2notSupported
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.9
brzaccVLCCMaximumBurstDuration
Applicable to all units.
Applicable only if Burst Mode Option is supported.
The maximum supported burst duration.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.10
brzaccVLCCDfsSupport
Applicable to AU/BU only.
The supported Dfs Option.
Enumeration
Enumerated Values:
1supported
2notSupported
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.11
brzaccVLCCMinimumHwRevision
Applicable to all units.
The Minimum HW Revision needed to support the country code.
Enumeration
Enumerated Values:
1hwRevisionA
2hwRevisionB
3hwRevisionC
4hwRevisionD
5hwRevisionE
6hwRevisionF
7hwRevisionG
255na
 .1.3.6.1.4.1.12394.1.1.6.25.3.1.12

brzaccVLNewTransmitPowerTable

table
.1.3.6.1.4.1.12394.1.1.6.27 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLNewTransmitPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLNewTransmitPowerTable' 
Applicable to all units with SW version 5.1 and higher
A table of transmit power parameters.
brzaccVLNewTransmitPowerEntry row .1.3.6.1.4.1.12394.1.1.6.27.1
Applicable to all units with SW version 5.1 and higher
An entry in the Transmit Power Table.
Indexes
Column Syntax OID
brzaccVLNewModulationLevelIdx
Applicable to all units with SW version 5.1 and higher.
An index ( and modulation level ) of an entry in the NewTransmitPowerTable.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.12394.1.1.6.27.1.1
brzaccVLNewMaximumTxPowerRange
Applicable to all units with SW version 5.1 and higher.
The allowed range for the brzaccVLNewTxPower parameter at the
applicable modulation level . Range: -10 to the maximum allowed
power level at the applicable modul…
DisplayString .1.3.6.1.4.1.12394.1.1.6.27.1.2
brzaccVLNewTxPower
Applicable to all units with SW version 5.1 and higher.
In AU/BU: The transmit power in dBm defined for the applicable rate.
In SU/RB: If ATPC is disabled, this is the transmit power in dBm
defined for the …
DisplayStringr/w .1.3.6.1.4.1.12394.1.1.6.27.1.3
brzaccVLNewCurrentTxPower
Applicable to SU/RB with SW version 5.1 and higher.
The actual transmit power in dBm for the applicable rate.
Range: -17 to the maximum value defined by brzaccVLNewMaximumTxPowerRange
for the applicable modulation leve…
DisplayString .1.3.6.1.4.1.12394.1.1.6.27.1.4

brzaccVLNewMaximumTransmitPowerTable

table
.1.3.6.1.4.1.12394.1.1.6.28 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLNewMaximumTransmitPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLNewMaximumTransmitPowerTable' 
Applicable to SU/RB only.
A table of maximum transmit power parameters.
brzaccVLNewMaximumTransmitPowerEntry row .1.3.6.1.4.1.12394.1.1.6.28.1
Applicable to SU/RB only.
An entry in the Maximum Transmit Power Table.
Indexes
Column Syntax OID
brzaccVLNewMaxModulationLevelIdx
Applicable to SU/RB only.
The applicable modulation level for an entry in the NEW Maximum Transmit Power Table.
This OID also represent an index of an entry in the NEW Maximum Transmit Power Table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.12394.1.1.6.28.1.1
brzaccVLNewDefinedMaximumTxPowerRange
Applicable to SU/RB only.
The allowed range for the brzaccVLNewMaxTxPower parameter at the
applicable modulation level .
Range: -10 to the maximum allowed power level at the applicable
modulation level , in dBm.
DisplayString .1.3.6.1.4.1.12394.1.1.6.28.1.2
brzaccVLNewMaxTxPower
Applicable to SU/RB only.
Read-only for units with SW version 4.0 and higher.
The maximum value that can be configured for the brzaccVLNewTxPower
parameter. This is also the maximum power level that can be reached
by …
DisplayStringr/w .1.3.6.1.4.1.12394.1.1.6.28.1.3

brzaccVLInterferenceMitigationOutputTable

table
.1.3.6.1.4.1.12394.1.1.6.31.17 · 1 row entry · 6 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLInterferenceMitigationOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLInterferenceMitigationOutputTable' 
Applicable to 900 MHz units, 2.4 GHz units and BNB10.
A table of Clear Channel Selection or Automatic Noise Floor Selection results.
brzaccVLInterferenceMitigationOutputEntry row .1.3.6.1.4.1.12394.1.1.6.31.17.1
Applicable to 900 MHz units, 2.4 GHz units and BNB10.
An entry in the InterferenceMitigationOutputTable.
Indexes
Column Syntax OID
brzaccVLInterferenceMitigationOutputFrequency
Applicable to 900 MHz units, 2.4 GHz units and BNB10.
The channel frequency
Integer32
Constraints:
range: 905-925
 .1.3.6.1.4.1.12394.1.1.6.31.17.1.1
brzaccVLInterferenceMitigationOutputScanningType
Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Type of scan that was run
Enumeration
Enumerated Values:
1typeCCSandANFS
2typeANFS
3typeCCS
4typeStatistics
 .1.3.6.1.4.1.12394.1.1.6.31.17.1.2
brzaccVLInterferenceMitigationOutputInstallationModel
Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Specifies the Installation Model used by the cell.
Enumeration
Enumerated Values:
1typeLOS
2typeNearLOS
3typeNoLOS
 .1.3.6.1.4.1.12394.1.1.6.31.17.1.3
brzaccVLInterferenceMitigationOutputNoiseFloor
Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Noise floor calculated for current frequency
Integer32
Constraints:
range: -102--55
 .1.3.6.1.4.1.12394.1.1.6.31.17.1.4
brzaccVLInterferenceMitigationOutputDistance
Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Estimated cell radius
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.31.17.1.5
brzaccVLInterferenceMitigationOutputPerformance
Applicable to 900 MHz units, 2.4 GHz units and BNB10.
Estimated cell performance
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.6.31.17.1.6

brzaccVLUdpPortRangeTable

table
.1.3.6.1.4.1.12394.1.1.7.10.3.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLUdpPortRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLUdpPortRangeTable' 
Applicable to all units. A table of UDP port ranges use for prioritization. 
The user can define up to 64 ranges.
An entry is empty if start is 65535 and end is 0
brzaccVLUdpPortRangeEntry row .1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1
Applicable to all units. A UDP Port Ranges Table entry.
Indexes
Column Syntax OID
brzaccVLUdpPortRangeStart
Applicable to all units. Start port of an UDP Port Range
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.1
brzaccVLUdpPortRangeEnd
Applicable to all units. End port of an UDP Port Range
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.2
brzaccVLUdpPortRangeIdx
Applicable to all units. UDP Port Range Entry's index
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.3

brzaccVLTcpPortRangeTable

table
.1.3.6.1.4.1.12394.1.1.7.10.3.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLTcpPortRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLTcpPortRangeTable' 
Table of TCP Port Ranges use for prioritization.
The user can define up to 64 ranges.
An entry is empty if start is 65535 and end is 0
brzaccVLTcpPortRangeEntry row .1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1
Applicable to all units. A TCP Port Ranges Table entry.
Indexes
Column Syntax OID
brzaccVLTcpPortRangeStart
Applicable to all units. Start port of a TCP Port Range
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.1
brzaccVLTcpPortRangeEnd
Applicable to all units. End port of a TCP Port Range
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.2
brzaccVLTcpPortRangeIdx
Applicable to all units. TCP Port Range Entry's index
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.3

brzaccVLIpFilterTable

table
.1.3.6.1.4.1.12394.1.1.8.2 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLIpFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLIpFilterTable' 
Starting with version 5.0, this is deprecated. 
Use brzaccVLNewIpFilterTable instead.
		Applicable to SU, RB and AU. 
 Not applicable to AU on 900 MHz. 
 An IP Filter Table of up to 8 user defined addresses, 
 or address groups, to be used if the selected User 
 Filtering option is userDefinedAddrOnly.
brzaccVLIpFilterEntry row .1.3.6.1.4.1.12394.1.1.8.2.1
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
An IP Filter Table entry.
Indexes
Column Syntax OID
brzaccVLIpID
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
An IP address of an IP Filter Table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.8.2.1.1
brzaccVLMaskID
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
An IP Mask of an IP Filter Table entry. Either a mask
or a range, but not both can be used to define an
address group. If the range is other than 0, than …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.8.2.1.2
brzaccVLIpFilterRange
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
An addresses range for the IP Filter Table entry. The
first address in the range is the IP address.
0 means that the range is not used.
Either a mask or …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.8.2.1.3
brzaccVLIpFilterIdx
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
A table index for the IP Filter Table entry.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.12394.1.1.8.2.1.4

brzaccVLNewIpFilterTable

table
.1.3.6.1.4.1.12394.1.1.8.6 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLNewIpFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLNewIpFilterTable' 
Applicable to SU, RB and AU. 
Not applicable to AU on 900 MHz.
An IP Filter Table of up to 8 user defined addresses, 
or address groups, to be used if the selected User 
Filtering option is userDefinedAddrOnly.
brzaccVLNewIpFilterEntry row .1.3.6.1.4.1.12394.1.1.8.6.1
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
An IP Filter Table entry.
Indexes
Column Syntax OID
brzaccVLNewIpID
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
An IP address of an IP Filter Table entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.8.6.1.1
brzaccVLNewMaskID
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
An IP Mask of an IP Filter Table entry. Either a mask
or a range, but not both can be used to define an
address group. If the range is other than 0, than …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.8.6.1.2
brzaccVLNewIpFilterRange
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
An addresses range for the IP Filter Table entry. The
first address in the range is the IP address.
0 means that the range is not used.
Either a mask or …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.8.6.1.3
brzaccVLNewIpFilterCommand
Applicable to SU, RB and AU.
Not applicable to AU on 900 MHz.
Supports only active(1), createAndGo(4) and destroy(6).
A command for the IP Filter Table entry.
Enumerationr/w
Enumerated Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.12394.1.1.8.6.1.4

brzaccVLSUPerModulationLevelCountersTable

table
.1.3.6.1.4.1.12394.1.1.11.2.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLSUPerModulationLevelCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLSUPerModulationLevelCountersTable' 
Applicable to SU/RB. 
Per Rate Counters table.
brzaccVLSUPerModulationLevelCountersEntry row .1.3.6.1.4.1.12394.1.1.11.2.5.2.1
Applicable to SU/RB.
An entry in the Per modulation Counters table.
Indexes
Column Syntax OID
brzaccVLSUPerModulationLevelCountersTableIdx
Applicable to SU/RB.
An index of an entry in the Per modulation level Counters table.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.12394.1.1.11.2.5.2.1.1
brzaccVLSUPerModulationLevelCountersApplicableModLevel
Applicable to SU/RB.
The applicable modulation level of the entry in the Per
modulation level Counters table.
Modulation Level 8 is not applicable for units with HW revision A.
Enumeration
Enumerated Values:
1modLevel-1
2modLevel-2
3modLevel-3
4modLevel-4
5modLevel-5
6modLevel-6
7modLevel-7
8modLevel-8
 .1.3.6.1.4.1.12394.1.1.11.2.5.2.1.2
brzaccVLSUPerModulationLevelCountersTxSuccess
Applicable to SU/RB.
The total number of successfully transmitted unicasts at the
applicable modulation level.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.2.5.2.1.3
brzaccVLSUPerModulationLevelCountersTxFailed
Applicable to SU/RB.
The total number of dropped frames at the applicable
Modulation Level.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.2.5.2.1.4

brzaccVLAUAdbTable

table
.1.3.6.1.4.1.12394.1.1.11.5.1.2 · 1 row entry · 45 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLAUAdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLAUAdbTable' 
Applicable to AU/BU only. 
AU/BU MAC Address Database table.
brzaccVLAUAdbEntry row .1.3.6.1.4.1.12394.1.1.11.5.1.2.1
Applicable to AU/BU only.
An entry in the AU/BU MAC Address Database table.
Indexes
Column Syntax OID
brzaccVLAdbIndex
Applicable to AU/BU only.
The index of an entry in the AU/BU MAC Address Database table.
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.1
brzaccVLAdbMacAddress
Applicable to AU/BU only.
The MAC Address of an SU/RB entry in the MAC Address Database
table.
MacAddress
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.2
brzaccVLAdbStatus
Applicable to AU/BU only.
The status of the relevant SU/RB.
Enumeration
Enumerated Values:
1associated
2authenticated
3notAuthenticated
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.3
brzaccVLAdbSwVersion
Applicable to AU/BU only.
The SW version of the relevant SU/RB.
Not available for SU-EZ.
DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.4
brzaccVLAdbSNR
Applicable to AU/BU only.
The average Signal to Noise Ratio in dB of frames received by
the AU/BU from the relevant SU/RB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.5
brzaccVLAdbMaxModulationLevel
Applicable to AU/BU only.
The value configured in the relevant SU/RB for the Maximum Modulation
Level parameter.
Modulation Level 8 is not applicable for units with HW revision A.
It is not applicable for SU-EZ and it…
Enumeration
Enumerated Values:
1modLevel-1
2modLevel-2
3modLevel-3
4modLevel-4
5modLevel-5
6modLevel-6
7modLevel-7
8modLevel-8
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.6
brzaccVLAdbTxFramesTotal
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.7
brzaccVLAdbDroppedFramesTotal
Applicable to AU/BU only.
Counts the total number of frames intended to the SU/RB that
were dropped because they were retransmitted to the extent
of the maximum allowed number of retransmissions without
being acknow…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.8
brzaccVLAdbTxSuccessModLevel1
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation level 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.9
brzaccVLAdbTxSuccessModLevel2
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation level 2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.10
brzaccVLAdbTxSuccessModLevel3
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/BU over the wireless link
using modulation level 3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.11
brzaccVLAdbTxSuccessModLevel4
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation level 4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.12
brzaccVLAdbTxSuccessModLevel5
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation level 5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.13
brzaccVLAdbTxSuccessModLevel6
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/BU over the wireless link
using modulation level 6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.14
brzaccVLAdbTxSuccessModLevel7
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation level 7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.15
brzaccVLAdbTxSuccessModLevel8
Applicable to AU/BU only.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation level 8.
Not applicable for unit…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.16
brzaccVLAdbTxFailedModLevel1
Applicable to AU/BU only.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.17
brzaccVLAdbTxFailedModLevel2
Applicable to AU/BU only.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.18
brzaccVLAdbTxFailedModLevel3
Applicable to AU/BU only.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.19
brzaccVLAdbTxFailedModLevel4
Applicable to AU/BU only.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.20
brzaccVLAdbTxFailedModLevel5
Applicable to AU/BU only.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.21
brzaccVLAdbTxFailedModLevel6
Applicable to AU/BU only.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.22
brzaccVLAdbTxFailedModLevel7
Applicable to AU/BU only.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.23
brzaccVLAdbTxFailedModLevel8
Applicable to AU/BU only.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 8.
Not applicable for units with HW revision A.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.24
brzaccVLAdbCirTx
Applicable to AU Only.
Not applicable to BreezeNET-B products.
This parameter is not relevant for SU-EZ with SW 1.00.15
and it is 0.
The value configured in the relevant SU for the CIR:
SU to AU parameter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.25
brzaccVLAdbMirTx
Applicable to AU/BU only.
The value configured in the relevant SU/RB for the MIR:
SU/RB to AU/BU parameter.
For SU-EZ SW version 1.00.15, it represents the value
set in AU-EZ.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.26
brzaccVLAdbCirRx
Applicable to AU Only.
Not applicable to BreezeNET-B products.
This parameter is not relevant for SU-EZ with SW
version 1.00.15 and it is 0.
The value configured in the relevant SU for the CIR:
AU to SU parameter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.27
brzaccVLAdbMirRx
Applicable to AU/BU only.
This parameter is not relevant for SU-EZ with SW
version 1.00.15 and it is 0.
The value configured in the relevant SU/RB for the MIR:
AU/BU to SU/RB parameter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.28
brzaccVLAdbCirMaxDelay
Applicable to AU Only.
Not applicable to BreezeNET-B products.
The value configured in the relevant SU for the CIR Maximum
Delay parameter.
It returns maximum value on 32 bits for SU-EZ with SW
version 1.00.15 and th…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.29
brzaccVLAdbDistance
Applicable to AU/BU Only.
The distance between the SU/RB and the AU/BU (In Kilometers).
It is not applicable for SU-EZ and it returns 0.
Enumeration
Enumerated Values:
1below-2-Km
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.30
brzaccVLAdbHwRevision
Applicable to AU/BU Only.
The SU/RB HW Revision.
Not available for SU-EZ.
Enumeration
Enumerated Values:
1hwRevisionA
2hwRevisionB
3hwRevisionC
4hwRevisionD
5hwRevisionE
6hwRevisionF
7hwRevisionG
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.31
brzaccVLAdbCpldVer
Applicable to AU/BU Only.
The SU/RB CPLD Version.
Not available for SU-EZ.
DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.32
brzaccVLAdbCountryCode
Applicable to AU/BU Only.
The SU/RB country code.
9999 means unavailable country code.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.33
brzaccVLAdbBootVer
Applicable to AU/BU Only.
The SU/RB Boot Version.
Not available for SU-EZ.
DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.34
brzaccVLAdbAtpcOption
Applicable to AU/BU Only.
The SU/RB ATPC option configuration.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.35
brzaccVLAdbAdapModOption
Applicable to AU/BU Only.
The SU/RB adaptive modulation option configuration.
It is not applicable for SU-EZ.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.36
brzaccVLAdbBurstModeOption
Applicable to AU/BU Only.
The SU/RB burst mode option configuration.
It is not applicable for SU-EZ.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.37
brzaccVLAdbConcatenationOption
Applicable to AU/BU Only.
The SU/RB concatenation option configuration.
It is not applicable for SU-EZ.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.39
brzaccVLAdbSecurityMode
Applicable to AU/BU Only.
The SU/RB security mode configuration.
Not available for SU-EZ.
Enumeration
Enumerated Values:
1wep
2aes
3fips197
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.41
brzaccVLAdbAuthOption
Applicable to AU/BU Only.
The SU/RB authentication algorithm configuration.
Not available for SU-EZ.
Enumeration
Enumerated Values:
1openSystem
2sharedKey
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.42
brzaccVLAdbDataEncyptOption
Applicable to AU/BU Only.
The SU/RB data encryption option configuration.
Not available for SU-EZ.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.43
brzaccVLAdbAge
Applicable to AU/BU only.
The time since any packet was received from the relevant SU/RB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.44
brzaccVLAdbUnitName
Applicable to AU/BU only.
The unit name of the relevant SU/RB.
Not available for SU-EZ.
DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.45
brzaccVLAdbRSSI
Applicable to AU/BU only with SW version 5.1 and higher.
The average Received Signal Strength Indication of frames received by
the AU/BU from the relevant SU/RB.
This value is given in dBm units.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.46
brzaccVLAdbIpAddress
Applicable to AU/BU only with SW version 5.2.11 and higher.
The Running IP address of the relevant SU/RB.
Not available for SU-EZ with SW version lower than 1.1.1
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.11.5.1.2.1.47

brzaccVLAUNewAdbTable

table
.1.3.6.1.4.1.12394.1.1.11.5.1.3 · 1 row entry · 55 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLAUNewAdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLAUNewAdbTable' 
Applicable to AU/BU only with SW version 5.0 and higher. 
AU/BU MAC Address New Database table idexed by MAC Address
brzaccVLAUNewAdbEntry row .1.3.6.1.4.1.12394.1.1.11.5.1.3.1
Applicable to AU/BU only with SW version 5.0 and higher.
An entry in the AU/BU MAC Address New Database table.
Indexes
Column Syntax OID
brzaccVLNewAdbMacAddress
Applicable to AU/BU only with SW version 5.0 and higher.
The MAC Address of an SU/RB entry in the MAC Address Database
table.
MacAddress
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.1
brzaccVLNewAdbIPaddress
Applicable to AU/BU only with SW version 5.0 and higher.
The Running IP address of the relevant SU/RB.
Not available for SU-EZ with SW version lower than 1.1.1
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.2
brzaccVLNewAdbUnitName
Applicable to AU/BU only with SW version 5.0 and higher.
The unit name of the relevant SU/RB.
Not available for SU-EZ.
DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.3
brzaccVLNewAdbUnitType
Applicable to AU/BU only with SW version 5.0 and higher.
The type of the relevant SU/RB.
su-6-1D (3) : SU-6-1D (subscriber unit supporting 6 Mbps)
Starting with 5.0 this is deprecated.
…
Enumeration
Enumerated Values:
3su-6-1D
4su-6-BD
5su-24-BD
8rb-B14
9rb-B28
10su-BD
11su-54-BD
12su-3-1D
13su-3-4D
18su4900
20rb-B100
21su-I
23su-EZ
24su-V
26rb-B10
27su-8-BD
28su-1-BD
29su-3-L
30su-6-L
31su-12-L
33su
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.4
brzaccVLNewAdbSwVersion
Applicable to AU/BU only with SW version 5.0 and higher.
The SW version of the relevant SU/RB.
Not available for SU-EZ.
DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.5
brzaccVLNewAdbHwRevision
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB HW Revision.
Not available for SU-EZ.
Enumeration
Enumerated Values:
1hwRevisionA
2hwRevisionB
3hwRevisionC
4hwRevisionD
5hwRevisionE
6hwRevisionF
7hwRevisionG
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.6
brzaccVLNewAdbCpldVer
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB CPLD Version.
Not available for SU-EZ.
DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.7
brzaccVLNewAdbBootVer
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB Boot Version.
Not available for SU-EZ.
DisplayString .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.8
brzaccVLNewAdbCountryCode
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB country code. 9999 means unavailable country code
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.9
brzaccVLNewAdbCirTx
Applicable to AU/BU only with SW version 5.0 and higher.
For BreezeNET-B products it is 0.
For SU_EZ with SW version 1.00.15 is not relevant and it is 0.
The value configured in the relevant SU for the CIR:
SU to A…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.10
brzaccVLNewAdbMirTx
Applicable to AU/BU only with SW version 5.0 and higher.
The value configured in the relevant SU/RB for the MIR:
SU/RB to AU/BU parameter.
For SU-EZ SW version 1.00.15, it represents the value
set in AU-EZ.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.11
brzaccVLNewAdbCirRx
Applicable to AU/BU only with SW version 5.0 and higher.
For BreezeNET-B products it is 0.
This parameter is not relevant for SU-EZ with version 1.00.15
and it is 0.
The value configured in the relevant SU for the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.12
brzaccVLNewAdbMirRx
Applicable to AU/BU only with SW version 5.0 and higher.
This parameter is not relevant for SU-EZ with version 1.00.15
and it is 0.
The value configured in the relevant SU/RB for the MIR:
AU/BU to SU/RB parameter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.13
brzaccVLNewAdbCirMaxDelay
Applicable to AU/BU only with SW version 5.0 and higher.
For BreezeNET-B products and SU-EZ with SW version 1.00.15
it is not relevant.
The value configured in the relevant SU/RB for the CIR Maximum
Delay parameter.
…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.14
brzaccVLNewAdbAtpcOption
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB ATPC option configuration.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.15
brzaccVLNewAdbAdapModOption
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB adaptive modulation option configuration.
It is not applicable for SU-EZ.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.16
brzaccVLNewAdbBurstModeOption
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB burst mode option configuration.
It is not applicable for SU-EZ.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.17
brzaccVLNewAdbConcatenationOption
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB concatenation option configuration.
It is not applicable for SU-EZ.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.18
brzaccVLNewAdbSecurityMode
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB security mode configuration.
Not available for SU-EZ.
Enumeration
Enumerated Values:
1wep
2aes
3fips197
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.19
brzaccVLNewAdbAuthOption
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB authentication algorithm configuration.
Not available for SU-EZ.
Enumeration
Enumerated Values:
1openSystem
2sharedKey
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.20
brzaccVLNewAdbDataEncyptOption
Applicable to AU/BU only with SW version 5.0 and higher.
The SU/RB data encryption option configuration.
Not available for SU-EZ.
Enumeration
Enumerated Values:
1disable
2enable
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.21
brzaccVLAdbWi2IPaddress
Applicable to AU/BU only with SW version 5.0 and higher.
The IP address of the Wi2 Access Point.
Not available for SU-EZ.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.22
brzaccVLNewAdbStatus
Applicable to AU/BU only with SW version 5.0 and higher.
The status of the relevant SU/RB.
Enumeration
Enumerated Values:
1associated
2authenticated
3notAuthenticated
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.23
brzaccVLNewAdbAge
Applicable to AU/BU only with SW version 5.0 and higher.
The time since any packet was received from the relevant SU/RB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.24
brzaccVLNewAdbDistance
Applicable to AU/BU only with SW version 5.0 and higher.
The distance between the SU/RB and the AU/BU (In Kilometers).
It is not applicable for SU-EZ and it returns 0.
Enumeration
Enumerated Values:
1below-2-Km
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.25
brzaccVLNewAdbSNR
Applicable to AU/BU only with SW version 5.0 and higher.
The average Signal to Noise Ratio in dB of frames received by
the AU/BU from the relevant SU/RB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.26
brzaccVLNewAdbMaxModulationLevel
Applicable to AU/BU only with SW version 5.0 and higher.
The value configured in the relevant SU/RB for the Maximum Modulation
Level parameter.
Modulation Level 8 is not applicable for units with HW revision A.
It is …
Enumeration
Enumerated Values:
1modLevel-1
2modLevel-2
3modLevel-3
4modLevel-4
5modLevel-5
6modLevel-6
7modLevel-7
8modLevel-8
255na
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.27
brzaccVLNewAdbTxFramesTotal
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.28
brzaccVLNewAdbDroppedFramesTotal
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of frames intended to the SU/RB that
were dropped because they were retransmitted to the extent
of the maximum allowed number of retran…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.29
brzaccVLNewAdbTxSuccessModLevel1
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation l…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.30
brzaccVLNewAdbTxSuccessModLevel2
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation l…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.31
brzaccVLNewAdbTxSuccessModLevel3
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/BU over the wireless link
using modulation l…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.32
brzaccVLNewAdbTxSuccessModLevel4
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation l…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.33
brzaccVLNewAdbTxSuccessModLevel5
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation l…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.34
brzaccVLNewAdbTxSuccessModLevel6
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/BU over the wireless link
using modulation l…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.35
brzaccVLNewAdbTxSuccessModLevel7
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation l…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.36
brzaccVLNewAdbTxSuccessModLevel8
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of unicast frames (excluding retransmissions)
that were successfully transmitted to the SU/RB over the wireless link
using modulation l…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.37
brzaccVLNewAdbTxFailedModLevel1
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.38
brzaccVLNewAdbTxFailedModLevel2
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.39
brzaccVLNewAdbTxFailedModLevel3
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.40
brzaccVLNewAdbTxFailedModLevel4
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 4.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.41
brzaccVLNewAdbTxFailedModLevel5
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 5.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.42
brzaccVLNewAdbTxFailedModLevel6
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 6.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.43
brzaccVLNewAdbTxFailedModLevel7
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 7.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.44
brzaccVLNewAdbTxFailedModLevel8
Applicable to AU/BU only with SW version 5.0 and higher.
Counts the total number of failures to successfully
transmit unicast frames intended to the SU/RB using modulation level 8.
Not applicable for units with HW revi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.45
brzaccVLNewAdbMainSwVersion
Applicable to AU/BU only with SW version 5.0 and higher.
Main Software Version of SU. Not available for SU-EZ.
OctetString
Constraints:
range: 0-35
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.46
brzaccVLNewAdbShadowSwVersion
Applicable to AU/BU only with SW version 5.0 and higher.
Shadow Software Version of SU. Not available for SU-EZ.
OctetString
Constraints:
range: 0-35
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.47
brzaccVLNewAdbReadOnlyCommunity
Applicable to AU/BU only with SW version 5.0 and higher .
SU/RB Read Only Community. Not available for SU-EZ.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.48
brzaccVLNewAdbWriteCommunity
Applicable to AU/BU only with SW version 5.0 and higher.
SU/RB Write Community
The Community is accessible only with the Read-Write community
string (administrator password).
If the Read-Only community of the AU/BU is…
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.49
brzaccVLNewAdbAIFS
Applicable to AU/BU only with SW version 5.0 and higher.
The Arbitration Inter-Frame Spacing (AIFS) of relevant SU/RB.
Not available for SU-EZ and it returns 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.50
brzaccVLNewAdbMinimumCW
Applicable to AU/BU only with SW version 5.0 and higher.
The Minimum Contention Window of relevant SU/RB.
Not available for SU-EZ and it returns 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.51
brzaccVLNewAdbMaximumCW
Applicable to AU/BU only with SW version 5.0 and higher.
The Maximum Contention Window of relevant SU/RB.
Not available for SU-EZ and it returns 0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.52
brzaccVLNewAdbESSID
Applicable to AU/BU only with SW version 5.0 and higher.
The ESSID of relevant SU/RB.
The ESSID is accessible only with the write community
string (administrator password).
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.53
brzaccVLNewAdbRSSI
Applicable to AU/BU only with SW version 5.1 and higher.
The average Received Signal Strength Indication of frames received by
the AU/BU from the relevant SU/RB.
This value is given in dBm units.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.54
brzaccVLNewAdbDfsOption
Applicable to AU/BU only with SW version 5.5.21 and higher.
The DFS option configuration received by
the AU/BU from the relevant SU/RB.
Enumeration
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.12394.1.1.11.5.1.3.1.55

brzaccVLMacPinpointTable

table
.1.3.6.1.4.1.12394.1.1.11.7.1 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLMacPinpointTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLMacPinpointTable' 
Applicable to AU/BU only.
A table that contains information about wireless device
used by a certain Ethernet station in order to
connect to the wireless network
brzaccVLMacPinpointEntry row .1.3.6.1.4.1.12394.1.1.11.7.1.1
Applicable to AU/BU only. An entry in the MAC Pinpoint Table.
Each entry contains an Ethernet station MAC address and the MAC
address of the wireless device used to connect it to the wireless
network
Indexes
Column Syntax OID
mptEthernetStationMACAddress
Applicable to AU/BU only.
The MAC address of the Ethernet station. It is used as an
index in the MAC Pinpoint Table.
MacAddress
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.11.7.1.1.1
mptUnitMACAddress
Applicable to AU/BU only. The MAC address of the wireless
device used by the station with the MAC Address from the
index in order to access the wireless network.
MacAddress
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.11.7.1.1.2

brzaccVLDrapGatewaysTable

table
.1.3.6.1.4.1.12394.1.1.11.8 · 1 row entry · 4 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLDrapGatewaysTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLDrapGatewaysTable' 
This table provides information about Gateways supporting DRAP that are
registered at the AU
brzaccVLDrapGatewayEntry row .1.3.6.1.4.1.12394.1.1.11.8.1
A Drap Gateway Entry.
Indexes
Column Syntax OID
brzaccVLDrapGatewayIndex
Gateway Entry's Index
Integer32
Constraints:
range: 1-512
 .1.3.6.1.4.1.12394.1.1.11.8.1.1
brzaccVLDrapGatewayIP
The IP address of the Gateway
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12394.1.1.11.8.1.2
brzaccVLDrapGatewayType
The Gateway type
Enumeration
Enumerated Values:
4vgDataVoice
5vgData1Voice1
6vgData4Voice2
7vgDataVoice2
11ngData4Wireless
255vgUnknown
 .1.3.6.1.4.1.12394.1.1.11.8.1.3
brzaccVLDrapGatewayNoOfActiveVoiceCalls
The current number of active voice calls handled by the Gateway
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.8.1.4

brzaccVLHiddenESSIDTable

table
.1.3.6.1.4.1.12394.1.1.11.9 · 1 row entry · 2 columns
Open in standard view
Uses the alvarion variant from /opt/observium/mibs/alvarion.
Command help
Walk brzaccVLHiddenESSIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALVARION-DOT11-WLAN-MIB' -M '/opt/observium/mibs/alvarion:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALVARION-DOT11-WLAN-MIB::brzaccVLHiddenESSIDTable' 
Applicable to SU/RB only with SW version 5.0 and higher.
The AU/BU units that rejected the subcribers because 
of worng ESSID
brzaccVLHiddenESSIDEntry row .1.3.6.1.4.1.12394.1.1.11.9.1
Applicable to SU/RB only with SW version 5.0 and higher.
An entry in the Hidden ESSID table.
Indexes
Column Syntax OID
brzaccVLHiddenESSIDMacAddress
The MAC Address of the staion that rejected the subscriber
beacuse of wrong ESSID
MacAddress
Type Constraints:
range: 6
 .1.3.6.1.4.1.12394.1.1.11.9.1.1
brzaccVLHiddenESSIDAge
The time (in second) passed since the corresponding AU/BU
rejected the subscriber because of wrong ESSID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12394.1.1.11.9.1.2