ALTIGA-FILTER-STATS-MIB

        The Altiga Filter Statistics MIB models counters and objects that are
of management interest for filters.
        
Acronyms
The following acronyms are used in this document:
        
  ICMP:       Internet Control Message Protocol
        
  MIB:        Management Information Base
        
  Rx:         Received
        
  TCP:        Transmission Control Protocol
        
  Tx:         Transmitted
        
  UDP:        User Datagram Protocol
    
Source file
ALTIGA-FILTER-STATS-MIB
Last revised
Identity
altigaFilterStatsMibModule
Base OID
1.3.6.1.4.1.3076.1.1.14.2
Imported Objects
ALTIGA-GLOBAL-REG alFilterMibModule
ALTIGA-MIB alFilterGroup alStatsFilter
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALTIGA-FILTER-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALTIGA-FILTER-STATS-MIB::altigaFilterStatsMibModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALTIGA-FILTER-STATS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALTIGA-FILTER-STATS-MIB::altigaFilterStatsMibModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (22)
altigaFilterStatsMibModule.1.3.6.1.4.1.3076.1.1.14.2
.1.3.6.1.4.1.3076.1.1.14.2.1
.1.3.6.1.4.1.3076.1.1.14.2.1.1
.1.3.6.1.4.1.3076.2.1.2.9.1
alFilterStatsTable.1.3.6.1.4.1.3076.2.1.2.9.2
alFilterStatsEntry.1.3.6.1.4.1.3076.2.1.2.9.2.1
alFilterStatsInterfaceIdInteger32.1.3.6.1.4.1.3076.2.1.2.9.2.1.1
alFilterStatsOutShortTcpHdrSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.10
alFilterStatsInShortUdpHdrSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.11
alFilterStatsOutShortUdpHdrSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.12
alFilterStatsInTcpFragDiscardSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.13
alFilterStatsOutTcpFragDiscardSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.14
alFilterStatsInIcmpFragDiscardSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.15
alFilterStatsOutIcmpFragDiscardSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.16
alFilterStatsStartTimeSNMPv2-SMITimeTicks.1.3.6.1.4.1.3076.2.1.2.9.2.1.2
alFilterStatsInPktsFilteredSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.3
alFilterStatsOutPktsFilteredSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.4
alFilterStatsInPktsRxSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.5
alFilterStatsOutPktsRxSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.6
alFilterStatsInPktsTxSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.7
alFilterStatsOutPktsTxSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.8
alFilterStatsInShortTcpHdrSNMPv2-SMICounter32.1.3.6.1.4.1.3076.2.1.2.9.2.1.9
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. ALTIGA-GLOBAL-REGcisco
  3. ALTIGA-MIBcisco
  4. SNMPv2-CONFrfc
  5. ALTIGA-FILTER-STATS-MIBciscoselected
Compliance Statements (1)

OID .1.3.6.1.4.1.3076.1.1.14.2.1.1.1
The compliance statement for agents which
implement the Altiga Filter Statistics MIB.
Required groups