ALCATEL-IND1-VLAN-STACKING-MIB Table View

A table that contains port-specific information for the VLAN Stacking feature. 
An entry in this table is created when a port is configured with VLAN stacking 
capability, OR when a port is configured with a specific vendor ethertype, a particular 
bridge protocol action.

alaVstkPortEntry row .1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1

A VLAN Stacking port entry.

Indexes

alaVstkPortNumber

Column	Syntax	OID
alaVstkPortNumber The port ifindex of the port for which this entry contains VLAN Stacking management information.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.1
alaVstkPortType The type of this VLAN Stacking port. User-customer (1) is a VLAN Stacking user port connected to customer network. User-provider (2) is a VLAN Stacking user port used to run provider management traffic. Network (2) in…	Enumerationr/w Enumerated Values: 1 userCustomer 2 userProvider 3 network	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.2
alaVstkPortVendorTpid The TPID for this port. It is used for the incoming data traffic parsing and it is substituted to the 802.1Q standard Tpid for the outgoing data traffic. This is used for compatibility with other vendor equipment. The…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.3
alaVstkPortBpduTreatment The customer bpdu treatment for this port. It defines the type of processing applied to the user's bridge protocol data unit. The bridge protocol treatment (flooded) floods any user's bridge protocol data unit to al…	Enumerationr/w Enumerated Values: 1 flooded 2 dropped	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.4
alaVstkPortAcceptFrameType The acceptable frame types on this port.	Enumerationr/w Enumerated Values: 1 tagged 2 untagged 3 all	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.5
alaVstkPortLookupMiss Treatment of tagged packets upon vlan lookup miss. Drop (1) means that on lookup miss the packets will be dropped. Default (2) means that on lookup miss the default SVLAN for that port will be used to tunnel the packets…	Enumerationr/w Enumerated Values: 1 drop 2 default	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.6
alaVstkPortDefaultSvlan The default svlan of this port.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.7
alaVstkPortRowStatus The status of this table entry. The supported value supported for set are createAndGo (4) and destroy(6), to create or remove a vlan-stacking port.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.8
alaVstkPortLegacyStpBpdu The legacy STP BPDU treatment for this port. It defines the type of processing applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer BPDUs with MAC address 01:80:c2:00:00:00 and its p…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.1.1.1.9

A table that contains svlan/ipmvlan-port association for the VLAN Stacking feature.

alaVstkSvlanPortEntry row .1.3.6.1.4.1.6486.800.1.2.1.37.1.1.2.1.1

The svlan/ipmvlan-port association.

Indexes

alaVstkSvlanPortSvlanNumber alaVstkSvlanPortPortNumber alaVstkSvlanPortCvlanNumber

Column	Syntax	OID
alaVstkSvlanPortSvlanNumber Number identifying the svlan/ipmvlan.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.2.1.1.1
alaVstkSvlanPortPortNumber The port ifindex of the port associated to the svlan/ipmvlan.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.2.1.1.2
alaVstkSvlanPortCvlanNumber The customer vlan id associated to the svlan/ipmvlan.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.2.1.1.3
alaVstkSvlanPortMode The vlan stacking mode: double tagging (1) or vlan translation/mapping (2). Only translation mode is valid in case of IPM Vlans	Enumerationr/w Enumerated Values: 1 doubleTag 2 translate	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.2.1.1.4
alaVstkSvlanPortRowStatus The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove an svlan-port association.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.37.1.1.2.1.1.5