ALCATEL-IND1-ROUTEMAP-MIB Table View

Protocol based configuration for route redistribution.

alaRouteMapRedistProtoEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.1.1

Identifies the source protocol and Route Map to be matched
for route redistribution. If the route matches one of the source
protocols Route Maps, and the Route Map is of type permit, then
the route will be redistribut…

Indexes

alaRouteMapRedistSrcProtoId alaRouteMapRedistDestProtoId alaRouteMapRedistRouteMapIndex

Column	Syntax	OID
alaRouteMapRedistSrcProtoId The source protocol of the route to be redistributed.	Enumeration Enumerated Values: 1 other 2 local 3 static 4 rip 5 ospf 6 bgp 7 ripng 8 ospfv3 9 bgp6 10 isis 11 isis6	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.1.1.1
alaRouteMapRedistDestProtoId The protocol that a route is distributed into.	Enumeration Enumerated Values: 1 rip 2 ospf 3 bgp 4 ripng 5 ospfv3 6 bgp6 7 isis 8 isis6	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.1.1.2
alaRouteMapRedistRouteMapIndex Index indicating Route Map to use for redistribution match. In the destroy case the value 0 indicates all route-maps.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.1.1.3
alaRouteMapRedistStatus Enable or disable the reditribution of routes into the specified protocol.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.1.1.4
alaRouteMapRedistAddressType The address family of the source and destination protocols. The set is constrained to ipv4 and ipv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.1.1.5
alaRouteMapRedistRowStatus Controls creation and deletion of Row Status entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.1.1.6

Table containing Access List name to Access List bindings.

alaRouteMapAccessListNameEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.2.1

Each entry binds an Access List Name to an Access List index.

Indexes

alaRouteMapAccessListName

Column	Syntax	OID
alaRouteMapAccessListName The name of an Access List.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.2.1.1
alaRouteMapAccessListNameIndex The index associated with the Access List name.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.2.1.2
alaRouteMapAccessListNameAddressType The type of address in this Access List. The set is constrained to ipv4 and ipv6.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.2.1.3
alaRouteMapAccessListNameRowStatus Controls creation and deletion of Row Status entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.2.1.4

This table contains all Access Lists configured on the switch.

alaRouteMapAccessListEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.3.1

Each entry identifies an IPv4 or IPv6 address or subnet to
match for route redistribution.

Indexes

alaRouteMapAccessListIndex alaRouteMapAccessListAddressType alaRouteMapAccessListAddress alaRouteMapAccessListPrefixLength

Column	Syntax	OID
alaRouteMapAccessListIndex The index associated with the Access List name.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.3.1.1
alaRouteMapAccessListAddressType The type of address in this Access List Table Entry. The set is constrained to ipv4 and ipv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.3.1.2
alaRouteMapAccessListAddress The IPv4 or IPv6 address associated with this access list entry. The type is identified by alaRouteMapAccessListAddressType.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.3.1.3
alaRouteMapAccessListPrefixLength The prefix length in bits of the IPv4 or IPv6 address associated with this Access List entry. The maximum for IPv4 is 32.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.3.1.4
alaRouteMapAccessListRedistControl Controls how a route is matched and redistributed. allSubnets matches all subnets of the prefix. noSubnets only matches the exact prefix. aggregate matches all subnets of the prefix, but only redistributes the prefix.	AlaRouteMapRedistControlr/w Type Values: 1 allSubnets 2 noSubnets 3 aggregate	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.3.1.5
alaRouteMapAccessListAction Controls whether an address should be redistributed or denied, if an Access list entry is matched.	AlaRouteMapActionr/w Type Values: 1 permit 2 deny	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.3.1.6
alaRouteMapAccessListRowStatus Controls creation and deletion of Row Status entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.3.1.7

Table containing Route Map name to Route Map index bindings.

alaRouteMapNameEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.4.1

Each entry binds a Route Map Name to a Route Map index.

Indexes

alaRouteMapName

Column	Syntax	OID
alaRouteMapName The name of a Route Map.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.4.1.1
alaRouteMapNameIndex The index associated with the Route Map name.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.4.1.2
alaRouteMapNameRowStatus Controls creation and deletion of Row Status entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.4.1.3

Table binds a sequence to a Route Map.

alaRouteMapSequenceEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.5.1

Each entry binds a Route Map and a Sequence.

Indexes

alaRouteMapSequenceIndex alaRouteMapSequenceNumber

Column	Syntax	OID
alaRouteMapSequenceIndex A Route Map Index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.5.1.1
alaRouteMapSequenceNumber The Sequence Number indicating the position of sequences with the same Route Map index.	Unsigned32 Constraints: range: 1-100	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.5.1.2
alaRouteMapSequenceAction Controls whether a sequence, if matched, should be redistributed or denied.	AlaRouteMapActionr/w Type Values: 1 permit 2 deny	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.5.1.3
alaRouteMapSequenceRowStatus Controls creation and deletion of Row Status entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.5.1.4

Protocol based configuration for route redistribution.

alaRouteMapEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.6.1

Each entry describes a match or set clause in a Route Map.

Indexes

alaRouteMapIndex alaRouteMapSequence alaRouteMapType alaRouteMapValue

Column	Syntax	OID
alaRouteMapIndex The index associated with the Route Map name.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.6.1.1
alaRouteMapSequence Route Maps are linked together using sequence numbers. All Route Maps with the same index and with different sequence numbers are linked together and processed in order of increasing sequence number.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.6.1.2
alaRouteMapType The type of match or set command in this entry. Route Map rows with the same Route Map Name, Sequence Number and Match/Set Type form a group. An entry within the group is uniquely identified by this Route Map Table ob…	AlaRouteMapType Type Values: 1 matchIpAccesList 2 matchIpAddress 3 matchIpNextHopAccessList 4 matchIpNextHopAddress 5 matchIpv6AccessList 6 matchIpv6Address 7 matchIpv6nExtHopAccessList 8 matchIpv6NextHopAddress 9 matchTag 10 matchIpv4Interface 11 matchIpv6Interface 12 matchMetric 13 matchRouteType 129 setMetric 130 setMetricType 131 setTag 132 setCommunity 133 setLocalPreference 134 setLevel 135 setIpNexthop 136 setIpv6Nexthop	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.6.1.3
alaRouteMapValue The string following the match or set keyword in a Route Map CLI command.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.6.1.4
alaRouteMapRowStatus Controls creation and deletion of Row Status entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.10.2.3.1.1.6.1.5