ALCATEL-IND1-QOS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
52
Rows
52
Columns
943
alaQoSRuleTable
table
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1
·
1 row entry
·
34 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSRuleTable'
Table of QoS Rule definitions
Definition of QoS Rule
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.1 |
||||||||||||
|
Is this rule enabled or not
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.2 |
||||||||||||
|
What entity created the rule.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.3 |
||||||||||||
|
Precedence value for rule.
Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.4 |
||||||||||||
|
Name of the condition to use
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.5 |
||||||||||||
|
Name of the action to use
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.6 |
||||||||||||
|
Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.7 |
||||||||||||
|
Indicator to tell whether to write out the rule during
snapshot commands. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.8 |
||||||||||||
|
Indicator to tell whether to log matches to this rule
in the QoS log. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.9 |
||||||||||||
|
Number of times this rule has been matched.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.10 |
||||||||||||
|
Is this rule currenly being enforced on the switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.11 |
||||||||||||
|
Is this rule enforcable by the switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.12 |
||||||||||||
|
Used to create/delete rules according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.13 |
||||||||||||
|
Name of the validity period to use
|
OctetStringr/w Enumerated Values:
Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.14 |
||||||||||||
|
Status field indicating whether there is a validity period
associated with this rule |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.15 |
||||||||||||
|
How often to look for packets matching this rule when logging.
When 0 log as many as possible. |
Integer32r/w Constraints: range: 1-25range: 0-3600 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.16 |
||||||||||||
|
Which rule statistics counters to update if not all are available
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.17 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.18 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.19 |
||||||||||||
|
Counter for packets out of bandwidth parameters
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.20 |
||||||||||||
|
Counter for bytes out of bandwidth parameters
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.21 |
||||||||||||
|
The type of rule this is. Each bit represents the following:
0x1 = bridged 0x2 = routed 0x4 = multicast |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.22 |
||||||||||||
|
Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked? |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.23 |
||||||||||||
|
This rule belongs to the default policy list.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.24 |
||||||||||||
|
Counter for the number of packets being green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.25 |
||||||||||||
|
Counter for the number of packets being yellow compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.26 |
||||||||||||
|
Counter for the number of packets being red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.27 |
||||||||||||
|
Counter for the number of packets being non-green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.28 |
||||||||||||
|
Counter for the number of packets being non-red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.29 |
||||||||||||
|
Flag for enabling/disbling the accounting mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.30 |
||||||||||||
|
Shows the packet per second rate
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.31 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.32 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.33 |
||||||||||||
|
Shows the Bits per second rate
|
SNMPv2-SMICounter64 Constraints: range: 1-4094 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.34 |
alaQoSAppliedRuleTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2
·
1 row entry
·
34 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedRuleTable'
Table of QoS AppliedRule definitions
Definition of QoS AppliedRule
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule
|
OctetString Enumerated Values:
Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.1 |
||||||||||||
|
Is this rule enabled or not
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.2 |
||||||||||||
|
What entity created the rule.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.3 |
||||||||||||
|
Precedence value for rule.
Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.4 |
||||||||||||
|
Name of the condition to use
|
OctetString Constraints: range: 1-4094range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.5 |
||||||||||||
|
Name of the action to use
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.6 |
||||||||||||
|
Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.7 |
||||||||||||
|
Indicator to tell whether to write out the rule during
snapshot commands. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.8 |
||||||||||||
|
Indicator to tell whether to log matches to this rule
in the QoS log. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.9 |
||||||||||||
|
Number of times this rule has been matched.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.10 |
||||||||||||
|
Is this rule currenly being enforced on the switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.11 |
||||||||||||
|
Is this rule enforcable by the switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.12 |
||||||||||||
|
Used to create/delete rules according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.13 |
||||||||||||
|
Name of the validity period to use
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.14 |
||||||||||||
|
Status field indicating whether there is a validity period
associated with this rule |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.15 |
||||||||||||
|
How often to look for packets matching this rule when logging.
When 0 log as many as possible. |
Integer32 Constraints: range: 0-3600 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.16 |
||||||||||||
|
Which rule statistics counters to update if not all are available
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.17 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.18 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.19 |
||||||||||||
|
Counter for packets out of bandwidth parameters
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.20 |
||||||||||||
|
Counter for bytes out of bandwidth parameters
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.21 |
||||||||||||
|
The type of rule this is. Each bit represents the following:
0x1 = bridged 0x2 = routed 0x4 = multicast |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.22 |
||||||||||||
|
Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked? |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.23 |
||||||||||||
|
This rule belongs to the default policy list.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.24 |
||||||||||||
|
Counter for the number of packets being green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.25 |
||||||||||||
|
Counter for the number of packets being yellow compliant.
|
SNMPv2-SMICounter64 Constraints: range: 1-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.26 |
||||||||||||
|
Counter for the number of packets being red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.27 |
||||||||||||
|
Counter for the number of packets being non-green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.28 |
||||||||||||
|
Counter for the number of packets being non-red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.29 |
||||||||||||
|
Flag for enabling/disabling the accounting mode.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.30 |
||||||||||||
|
Shows the packet per second rate
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.31 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.32 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.33 |
||||||||||||
|
Shows the Bits per second rate
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.34 |
alaQoSConditionTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3
·
1 row entry
·
124 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSConditionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSConditionTable'
Table of QoS Condition definitions
Definition of QoS Condition
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of condition
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.1 |
||||||||||||||
|
What entity created the condition.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.2 |
||||||||||||||
|
Source physical slot used for traffic classification
When 0, the port identifies an aggregate |
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.3 |
||||||||||||||
|
Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.4 |
||||||||||||||
|
Source physical port range start to use for
traffic classification |
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.5 |
||||||||||||||
|
Source physical port group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.6 |
||||||||||||||
|
Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.7 |
||||||||||||||
|
Destination physical slot used for traffic classification
When 0, the port identifies an aggregate |
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.8 |
||||||||||||||
|
Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.9 |
||||||||||||||
|
Destination physical port range start to use for traffic
classification |
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.10 |
||||||||||||||
|
Destination physical port group to use for traffic
classification |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.11 |
||||||||||||||
|
Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.12 |
||||||||||||||
|
Source physical interface type to use for traffic
classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.13 |
||||||||||||||
|
Status field indicating whether the source physical
interface type needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.14 |
||||||||||||||
|
Destination physical interface type to use for traffic
classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.15 |
||||||||||||||
|
Status field indicating whether the destination physical
interface type needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.16 |
||||||||||||||
|
Source MAC address to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.17 |
||||||||||||||
|
Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.18 |
||||||||||||||
|
Source MAC mask to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.19 |
||||||||||||||
|
Source MAC group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.20 |
||||||||||||||
|
Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.21 |
||||||||||||||
|
Destination MAC address to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.22 |
||||||||||||||
|
Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.23 |
||||||||||||||
|
Destination MAC mask to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.24 |
||||||||||||||
|
Destination MAC group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.25 |
||||||||||||||
|
Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.26 |
||||||||||||||
|
Source VLAN to use for traffic classification
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.27 |
||||||||||||||
|
Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.28 |
||||||||||||||
|
Destination VLAN to use for traffic classification
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.29 |
||||||||||||||
|
Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.30 |
||||||||||||||
|
802.1p value to use for traffic classification
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.31 |
||||||||||||||
|
Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.32 |
||||||||||||||
|
Source IP address to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.33 |
||||||||||||||
|
Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.34 |
||||||||||||||
|
Source IP mask to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.35 |
||||||||||||||
|
Source network group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.36 |
||||||||||||||
|
Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.37 |
||||||||||||||
|
Destination IP address to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.38 |
||||||||||||||
|
Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.39 |
||||||||||||||
|
Destination IP mask to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.40 |
||||||||||||||
|
Destination network group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.41 |
||||||||||||||
|
Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.42 |
||||||||||||||
|
Multicast IP address to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.43 |
||||||||||||||
|
Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.44 |
||||||||||||||
|
Multicast IP mask to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.45 |
||||||||||||||
|
Multicast network group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.46 |
||||||||||||||
|
Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.47 |
||||||||||||||
|
TOS value to use for traffic classification
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.48 |
||||||||||||||
|
Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.49 |
||||||||||||||
|
TOS mask to use for traffic classification
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.50 |
||||||||||||||
|
DSCP value to use for traffic classification
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.51 |
||||||||||||||
|
Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.52 |
||||||||||||||
|
DSCP mask to use for traffic classification
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.53 |
||||||||||||||
|
IP protocol to use for traffic classification.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.54 |
||||||||||||||
|
Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.55 |
||||||||||||||
|
Source IP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.56 |
||||||||||||||
|
Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.57 |
||||||||||||||
|
Destination IP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.58 |
||||||||||||||
|
Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.59 |
||||||||||||||
|
Name of service to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.60 |
||||||||||||||
|
Status field indicating whether the service
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.61 |
||||||||||||||
|
Name of service group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.62 |
||||||||||||||
|
Status field indicating whether the service group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.63 |
||||||||||||||
|
ICMP type to use for traffic classification
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.64 |
||||||||||||||
|
Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.65 |
||||||||||||||
|
ICMP code to use for traffic classification
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.66 |
||||||||||||||
|
Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.67 |
||||||||||||||
|
DLCI to use to traffic classification
|
Integer32r/w Constraints: range: 0-512 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.68 |
||||||||||||||
|
Status field indicating whether the DLCI
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.69 |
||||||||||||||
|
Used to create/delete conditions according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.70 |
||||||||||||||
|
Source physical port range end to use for traffic
classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port. |
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.71 |
||||||||||||||
|
Destination physical port range end to use for traffic
classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port. |
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.72 |
||||||||||||||
|
Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.73 |
||||||||||||||
|
Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.74 |
||||||||||||||
|
Source TCP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.75 |
||||||||||||||
|
Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.76 |
||||||||||||||
|
Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.77 |
||||||||||||||
|
Destination TCP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.78 |
||||||||||||||
|
Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.79 |
||||||||||||||
|
Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.80 |
||||||||||||||
|
Source UDP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.81 |
||||||||||||||
|
Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.82 |
||||||||||||||
|
Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.83 |
||||||||||||||
|
Destination UDP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.84 |
||||||||||||||
|
Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.85 |
||||||||||||||
|
Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.86 |
||||||||||||||
|
Ethertype value to use for traffic classification
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.87 |
||||||||||||||
|
Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.88 |
||||||||||||||
|
Use any/all specifieid TCP flags for traffic classification
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.89 |
||||||||||||||
|
Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.90 |
||||||||||||||
|
TCP flags values used for traffic classification
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.91 |
||||||||||||||
|
Not used
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.92 |
||||||||||||||
|
Mask of TCP flags bits used for traffic classification
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.93 |
||||||||||||||
|
Not used
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.94 |
||||||||||||||
|
Look for established TCP sessions in classification
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.95 |
||||||||||||||
|
Source IPv6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.96 |
||||||||||||||
|
Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.97 |
||||||||||||||
|
Source IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.98 |
||||||||||||||
|
Destination IPv6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.99 |
||||||||||||||
|
Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.100 |
||||||||||||||
|
Destination IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.101 |
||||||||||||||
|
classify IPV6 traffic
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.102 |
||||||||||||||
|
NH value to use for traffic classification
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.103 |
||||||||||||||
|
Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.104 |
||||||||||||||
|
FL value to use for traffic classification
|
Integer32r/w Constraints: range: 0-1048575 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.105 |
||||||||||||||
|
Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.106 |
||||||||||||||
|
Multicast IPv6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.107 |
||||||||||||||
|
Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.108 |
||||||||||||||
|
Multicast IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.109 |
||||||||||||||
|
DSCP value to use for traffic classification
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.110 |
||||||||||||||
|
Customer VLAN to use for traffic classification
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.111 |
||||||||||||||
|
Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.112 |
||||||||||||||
|
Customer 802.1p to use for traffic classification
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.113 |
||||||||||||||
|
Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.114 |
||||||||||||||
|
Name of Vrf to match traffic in
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.115 |
||||||||||||||
|
Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.116 |
||||||||||||||
|
802.1p range end value to use for traffic classification.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.117 |
||||||||||||||
|
Inner 802.1p range end value to use for traffic
classification. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.118 |
||||||||||||||
|
Source vlan group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.119 |
||||||||||||||
|
Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for source vlan group. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.120 |
||||||||||||||
|
Inner Source vlan group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.121 |
||||||||||||||
|
Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for inner source vlan group. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.122 |
||||||||||||||
|
SIP type to use for traffic classification
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.123 |
||||||||||||||
|
SIP Status field indicates whether SIP is enabled or disabled
for traffic classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.124 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4
·
1 row entry
·
124 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedConditionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedConditionTable'
Table of QoS AppliedCondition definitions
Definition of QoS AppliedCondition
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of condition
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.1 |
||||||||||||||
|
What entity created the condition.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.2 |
||||||||||||||
|
Source physical slot used for traffic classification
When 0, the port identifies an aggregate |
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.3 |
||||||||||||||
|
Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.4 |
||||||||||||||
|
Source physical port range start to use for
traffic classification |
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.5 |
||||||||||||||
|
Source physical port group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.6 |
||||||||||||||
|
Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.7 |
||||||||||||||
|
Destination physical slot used for traffic classification
When 0, the port identifies an aggregate |
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.8 |
||||||||||||||
|
Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.9 |
||||||||||||||
|
Destination physical port range start to use for traffic
classification |
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.10 |
||||||||||||||
|
Destination physical port group to use for traffic
classification |
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.11 |
||||||||||||||
|
Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.12 |
||||||||||||||
|
Source physical interface type to use for traffic
classification |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.13 |
||||||||||||||
|
Status field indicating whether the source physical
interface type needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.14 |
||||||||||||||
|
Destination physical interface type to use for traffic
classification |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.15 |
||||||||||||||
|
Status field indicating whether the destination physical
interface type needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.16 |
||||||||||||||
|
Source MAC address to use for traffic classification
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.17 |
||||||||||||||
|
Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.18 |
||||||||||||||
|
Source MAC mask to use for traffic classification
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.19 |
||||||||||||||
|
Source MAC group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.20 |
||||||||||||||
|
Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.21 |
||||||||||||||
|
Destination MAC address to use for traffic classification
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.22 |
||||||||||||||
|
Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.23 |
||||||||||||||
|
Destination MAC mask to use for traffic classification
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.24 |
||||||||||||||
|
Destination MAC group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.25 |
||||||||||||||
|
Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.26 |
||||||||||||||
|
Source VLAN to use for traffic classification
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.27 |
||||||||||||||
|
Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.28 |
||||||||||||||
|
Destination VLAN to use for traffic classification
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.29 |
||||||||||||||
|
Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.30 |
||||||||||||||
|
802.1p value to use for traffic classification
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.31 |
||||||||||||||
|
Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.32 |
||||||||||||||
|
Source IP address to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.33 |
||||||||||||||
|
Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.34 |
||||||||||||||
|
Source IP mask to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.35 |
||||||||||||||
|
Source network group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.36 |
||||||||||||||
|
Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.37 |
||||||||||||||
|
Destination IP address to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.38 |
||||||||||||||
|
Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.39 |
||||||||||||||
|
Destination IP mask to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.40 |
||||||||||||||
|
Destination network group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.41 |
||||||||||||||
|
Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.42 |
||||||||||||||
|
Multicast IP address to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.43 |
||||||||||||||
|
Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.44 |
||||||||||||||
|
Multicast IP mask to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.45 |
||||||||||||||
|
Multicast network group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.46 |
||||||||||||||
|
Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.47 |
||||||||||||||
|
TOS value to use for traffic classification
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.48 |
||||||||||||||
|
Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.49 |
||||||||||||||
|
TOS mask to use for traffic classification
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.50 |
||||||||||||||
|
DSCP value to use for traffic classification
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.51 |
||||||||||||||
|
Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.52 |
||||||||||||||
|
DSCP mask to use for traffic classification
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.53 |
||||||||||||||
|
IP protocol to use for traffic classification.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.54 |
||||||||||||||
|
Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.55 |
||||||||||||||
|
Source IP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.56 |
||||||||||||||
|
Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.57 |
||||||||||||||
|
Destination IP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.58 |
||||||||||||||
|
Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.59 |
||||||||||||||
|
Name of service to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.60 |
||||||||||||||
|
Status field indicating whether the service
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.61 |
||||||||||||||
|
Name of service group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.62 |
||||||||||||||
|
Status field indicating whether the service group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.63 |
||||||||||||||
|
ICMP type to use for traffic classification
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.64 |
||||||||||||||
|
Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.65 |
||||||||||||||
|
ICMP code to use for traffic classification
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.66 |
||||||||||||||
|
Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.67 |
||||||||||||||
|
DLCI to use to traffic classification
|
Integer32 Constraints: range: 0-512 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.68 |
||||||||||||||
|
Status field indicating whether the DLCI
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.69 |
||||||||||||||
|
Used to create/delete conditions according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.70 |
||||||||||||||
|
Source physical port range end to use for traffic
classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port. |
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.71 |
||||||||||||||
|
Destination physical port range end to use for traffic
classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port. |
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.72 |
||||||||||||||
|
Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.73 |
||||||||||||||
|
Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.74 |
||||||||||||||
|
Source TCP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.75 |
||||||||||||||
|
Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.76 |
||||||||||||||
|
Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.77 |
||||||||||||||
|
Destination TCP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.78 |
||||||||||||||
|
Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.79 |
||||||||||||||
|
Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.80 |
||||||||||||||
|
Source UDP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.81 |
||||||||||||||
|
Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.82 |
||||||||||||||
|
Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.83 |
||||||||||||||
|
Destination UDP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.84 |
||||||||||||||
|
Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.85 |
||||||||||||||
|
Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.86 |
||||||||||||||
|
Ethertype value to use for traffic classification
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.87 |
||||||||||||||
|
Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.88 |
||||||||||||||
|
Use any/all specifieid TCP flags for traffic classification
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.89 |
||||||||||||||
|
Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.90 |
||||||||||||||
|
TCP flags values used for traffic classification
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.91 |
||||||||||||||
|
Not used
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.92 |
||||||||||||||
|
Mask of TCP flags bits used for traffic classification
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.93 |
||||||||||||||
|
Not used
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.94 |
||||||||||||||
|
Look for established TCP sessions in classification
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.95 |
||||||||||||||
|
Source IPv6 address to use for traffic classification
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.96 |
||||||||||||||
|
Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.97 |
||||||||||||||
|
Source IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.98 |
||||||||||||||
|
Destination IPv6 address to use for traffic classification
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.99 |
||||||||||||||
|
Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.100 |
||||||||||||||
|
Destination IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.101 |
||||||||||||||
|
classify IPV6 traffic
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.102 |
||||||||||||||
|
NH value to use for traffic classification
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.103 |
||||||||||||||
|
Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.104 |
||||||||||||||
|
FL value to use for traffic classification
|
Integer32 Constraints: range: 0-1048575 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.105 |
||||||||||||||
|
Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.106 |
||||||||||||||
|
Multicast IPv6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.107 |
||||||||||||||
|
Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.108 |
||||||||||||||
|
Multicast IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.109 |
||||||||||||||
|
DSCP value to use for traffic classification
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.110 |
||||||||||||||
|
Customer VLAN to use for traffic classification
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.111 |
||||||||||||||
|
Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.112 |
||||||||||||||
|
Customer 802.1p to use for traffic classification
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.113 |
||||||||||||||
|
Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.114 |
||||||||||||||
|
Name of Vrf to match traffic in
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.115 |
||||||||||||||
|
Status field indicating whether the traffic from a specific vrf needs
to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.116 |
||||||||||||||
|
802.1p range end value to use for traffic classification.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.117 |
||||||||||||||
|
Inner 802.1p range end value to use for traffic classification.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.118 |
||||||||||||||
|
Source vlan group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.119 |
||||||||||||||
|
Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for source vlan group. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.120 |
||||||||||||||
|
Inner Source vlan group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.121 |
||||||||||||||
|
Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for inner source vlan group. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.122 |
||||||||||||||
|
SIP type to use for traffic classification
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.123 |
||||||||||||||
|
SIP Status field indicates whether SIP is enabled or disabled
for traffic classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.124 |
alaQoSServiceTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5
·
1 row entry
·
22 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSServiceTable'
Table of QoS Service definitions
Definition of QoS Service
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of the service
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.1 |
||||||||||||
|
What entity created the service.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.2 |
||||||||||||
|
protocol field for Service
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.3 |
||||||||||||
|
Source IP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.4 |
||||||||||||
|
Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.5 |
||||||||||||
|
Destination IP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.6 |
||||||||||||
|
Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.7 |
||||||||||||
|
Used to create/delete services according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.8 |
||||||||||||
|
Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.9 |
||||||||||||
|
Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.10 |
||||||||||||
|
Source TCP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.11 |
||||||||||||
|
Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.12 |
||||||||||||
|
Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.13 |
||||||||||||
|
Destination TCP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.14 |
||||||||||||
|
Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.15 |
||||||||||||
|
Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.16 |
||||||||||||
|
Source UDP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.17 |
||||||||||||
|
Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.18 |
||||||||||||
|
Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.19 |
||||||||||||
|
Destination UDP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.20 |
||||||||||||
|
Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.21 |
||||||||||||
|
Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.22 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6
·
1 row entry
·
22 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedServiceTable'
Table of QoS AppliedService definitions
Definition of QoS AppliedService
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of the service
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.1 |
||||||||||||
|
What entity created the service.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.2 |
||||||||||||
|
protocol field for AppliedService
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.3 |
||||||||||||
|
Source IP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.4 |
||||||||||||
|
Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.5 |
||||||||||||
|
Destination IP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.6 |
||||||||||||
|
Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.7 |
||||||||||||
|
Used to create/delete services according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.8 |
||||||||||||
|
Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.9 |
||||||||||||
|
Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.10 |
||||||||||||
|
Source TCP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.11 |
||||||||||||
|
Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.12 |
||||||||||||
|
Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.13 |
||||||||||||
|
Destination TCP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.14 |
||||||||||||
|
Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.15 |
||||||||||||
|
Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.16 |
||||||||||||
|
Source UDP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.17 |
||||||||||||
|
Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.18 |
||||||||||||
|
Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.19 |
||||||||||||
|
Destination UDP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.20 |
||||||||||||
|
Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.21 |
||||||||||||
|
Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.22 |
alaQoSServiceGroupsTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSServiceGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSServiceGroupsTable'
Table of QoS ServiceGroups definitions
Definition of QoS ServiceGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of service group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.1 |
||||||||||||
|
What entity created the service group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.2 |
||||||||||||
|
Used to create/delete service groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedServiceGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedServiceGroupsTable'
Table of QoS AppliedServiceGroups definitions
Definition of QoS AppliedServiceGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of service group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.1 |
||||||||||||
|
What entity created the service group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.2 |
||||||||||||
|
Used to create/delete service groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.3 |
alaQoSServiceGroupTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9
·
1 row entry
·
2 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSServiceGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSServiceGroupTable'
Table of QoS ServiceGroup definitions
Definition of QoS ServiceGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of service in service group entry
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.1 |
||||||||||||
|
Used to create/delete service group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.2 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10
·
1 row entry
·
2 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedServiceGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedServiceGroupTable'
Table of QoS AppliedServiceGroup definitions
Definition of QoS AppliedServiceGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of service in service group entry
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.1 |
||||||||||||
|
Used to create/delete service group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.2 |
alaQoSNetworkGroupsTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSNetworkGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSNetworkGroupsTable'
Table of QoS NetworkGroups definitions
Definition of QoS NetworkGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of network group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.1 |
||||||||||||
|
What entity created the network group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.2 |
||||||||||||
|
Used to create/delete network groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedNetworkGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedNetworkGroupsTable'
Table of QoS AppliedNetworkGroups definitions
Definition of QoS AppliedNetworkGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of network group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.1 |
||||||||||||
|
What entity created the network group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.2 |
||||||||||||
|
Used to create/delete network groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.3 |
alaQoSNetworkGroupTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSNetworkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSNetworkGroupTable'
Table of QoS NetworkGroup definitions
Definition of QoS NetworkGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IP address for network group entry.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.1 |
||||||||||||
|
IP mask for network group entry.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.2 |
||||||||||||
|
Used to create/delete network group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedNetworkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedNetworkGroupTable'
Table of QoS AppliedNetworkGroup definitions
Definition of QoS AppliedNetworkGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IP address for network group entry.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.1 |
||||||||||||
|
IP mask for network group entry.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.2 |
||||||||||||
|
Used to create/delete network group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.3 |
alaQoSMACGroupsTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSMACGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSMACGroupsTable'
Table of QoS MACGroups definitions
Definition of QoS MACGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of MAC group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.1 |
||||||||||||
|
What entity created the MAC group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.2 |
||||||||||||
|
Used to create/delete MAC groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedMACGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedMACGroupsTable'
Table of QoS AppliedMACGroups definitions
Definition of QoS AppliedMACGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of MAC group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.1 |
||||||||||||
|
What entity created the MAC group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.2 |
||||||||||||
|
Used to create/delete MAC groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.3 |
alaQoSMACGroupTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSMACGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSMACGroupTable'
Table of QoS MACGroup definitions
Definition of QoS MACGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAC address for MAC group entry
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.1 |
||||||||||||
|
MAC mask for MAC group entry
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.2 |
||||||||||||
|
Used to create/delete MAC group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedMACGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedMACGroupTable'
Table of QoS AppliedMACGroup definitions
Definition of QoS AppliedMACGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAC address for MAC group entry
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.1 |
||||||||||||
|
MAC mask for MAC group entry
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.2 |
||||||||||||
|
Used to create/delete MAC group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.3 |
alaQoSPortGroupsTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSPortGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSPortGroupsTable'
Table of QoS PortGroups definitions
Definition of QoS PortGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of port group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.1 |
||||||||||||
|
What entity created the port group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.2 |
||||||||||||
|
Used to create/delete port groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.3 |
||||||||||||
|
Mode for policy action on the per port basis or group basis.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedPortGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedPortGroupsTable'
Table of QoS AppliedPortGroups definitions
Definition of QoS AppliedPortGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of port group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.1 |
||||||||||||
|
What entity created the port group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.2 |
||||||||||||
|
Used to create/delete port groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.3 |
||||||||||||
|
Mode for policy action on the per port basis or group basis.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.4 |
alaQoSPortGroupTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSPortGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSPortGroupTable'
Table of QoS PortGroup definitions
Definition of QoS PortGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Physical slot for port group entry
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.1 |
||||||||||||
|
Physical port range start for port group entry
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.2 |
||||||||||||
|
Used to create/delete port group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.3 |
||||||||||||
|
Physical port range end for port group entry
Must be greater than port range start to indicate a range. When '1', use port as a single port. |
Integer32 Constraints: range: 0-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedPortGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedPortGroupTable'
Table of QoS AppliedPortGroup definitions
Definition of QoS AppliedPortGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Physical slot for port group entry
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.1 |
||||||||||||
|
Physical port range start for port group entry
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.2 |
||||||||||||
|
Used to create/delete port group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.3 |
||||||||||||
|
Physical port range end for port group entry
Must be greater than port range start to indicate a range. When '1', use port as a single port. |
Integer32 Constraints: range: 0-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.4 |
alaQoSMapGroupsTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSMapGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSMapGroupsTable'
Table of QoS MapGroups definitions
Definition of QoS MapGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of map group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.1 |
||||||||||||
|
What entity created the map group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.2 |
||||||||||||
|
Used to create/delete map groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedMapGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedMapGroupsTable'
Table of QoS AppliedMapGroups definitions
Definition of QoS AppliedMapGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of map group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.1 |
||||||||||||
|
What entity created the map group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.2 |
||||||||||||
|
Used to create/delete map groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.3 |
alaQoSMapGroupTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSMapGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSMapGroupTable'
Table of QoS MapGroup definitions
Definition of QoS MapGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Key range start of map group entry.
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.1 |
||||||||||||
|
Key range end for map group entries. Key range end
must be greater than key range start to indicate a range. When '0', use key range start as a single key. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.2 |
||||||||||||
|
Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.3 |
||||||||||||
|
Used to create/delete map group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedMapGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedMapGroupTable'
Table of QoS AppliedMapGroup definitions
Definition of QoS AppliedMapGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Key range start of map group entry.
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.1 |
||||||||||||
|
Key range end for map group entries. Key range end
must be greater than key range start to indicate a range. When '0', use key range start as a single key. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.2 |
||||||||||||
|
Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.3 |
||||||||||||
|
Used to create/delete map group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.4 |
alaQoSActionTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27
·
1 row entry
·
83 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSActionTable'
Table of QoS Action definitions
Definition of QoS Action
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of action
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.1 |
||||||||||||
|
What entity created the action.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.2 |
||||||||||||
|
Disposition of traffic using the action.
Use to filter out unwanted traffic. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.3 |
||||||||||||
|
Which drop algorithm should be used to discard traffic when
oversubscribed. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.4 |
||||||||||||
|
Bandwidth at which WRED should discard most traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.5 |
||||||||||||
|
Status field indicating whether WRED maximum threshold
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.6 |
||||||||||||
|
Bandwidth at which WRED should start to discard traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7 |
||||||||||||
|
Status field indicating whether WRED minimum threshold
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.8 |
||||||||||||
|
Probabilty that traffic will be dropped at WRED
maximum threshold. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.9 |
||||||||||||
|
Status field indicating whether WRED maximum probability
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.10 |
||||||||||||
|
Minimum bandwidth (Kbits/sec) to guarantee for traffic
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.11 |
||||||||||||
|
Status field indicating whether minimum bandwidth
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.12 |
||||||||||||
|
Maximum bandwidth (Kbits/sec) allowed for traffic
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.13 |
||||||||||||
|
Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.14 |
||||||||||||
|
Peak bandwidth (Kbits/sec) allowed for traffic
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.15 |
||||||||||||
|
Status field indicating whether peak bandwidth
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.16 |
||||||||||||
|
Internal and queueing priority to use for traffic.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.17 |
||||||||||||
|
Status field indicating whether priority
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.18 |
||||||||||||
|
When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses the same action. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.19 |
||||||||||||
|
Maximum jitter to allow for traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.20 |
||||||||||||
|
Status field indicating whether jitter
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.21 |
||||||||||||
|
Maximum latency to allow for traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.22 |
||||||||||||
|
Status field indicating whether latency
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.23 |
||||||||||||
|
Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.24 |
||||||||||||
|
Status field indicating whether maximum depth
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.25 |
||||||||||||
|
Maxmimum buffers for queues for traffic.
|
Integer32r/w Constraints: range: 0-2047 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.26 |
||||||||||||
|
Status field indicating whether maximum buffers
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.27 |
||||||||||||
|
802.1p value to stamp on traffic.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.28 |
||||||||||||
|
Status field indicating whether 802.1p
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.29 |
||||||||||||
|
TOS value to stamp on traffic. (High 3 bits of TOS byte)
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.30 |
||||||||||||
|
Status field indicating whether TOS
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.31 |
||||||||||||
|
TOS value to stamp on traffic. (High 6 bits of TOS byte)
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.32 |
||||||||||||
|
Status field indicating whether DSCP
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.33 |
||||||||||||
|
What field to use as key for mapping 802.1p/TOS/DSCP priorities
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.34 |
||||||||||||
|
What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.35 |
||||||||||||
|
Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities. |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.36 |
||||||||||||
|
Status field indicating whether a map group
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.37 |
||||||||||||
|
Source IP address to rewrite on traffic.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.38 |
||||||||||||
|
Status field indicating whether source rewrite IP address & mask
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.39 |
||||||||||||
|
Source rewrite IP mask to determine how much of
source IP to rewrite. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.40 |
||||||||||||
|
Name of network group containing source address/masks to rewrite
on traffic. Must be a one to on correspondence with source network group entries in the condition. |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.41 |
||||||||||||
|
Status field indicating whether source rewrite network group
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.42 |
||||||||||||
|
Destination IP address to rewrite on traffic.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.43 |
||||||||||||
|
Status field indicating whether destination rewrite IP address
& mask is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.44 |
||||||||||||
|
Destination rewrite IP mask to determine how much of
destination IP to rewrite. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.45 |
||||||||||||
|
Name of network group containing destination address/masks to
rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition. |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.46 |
||||||||||||
|
Status field indicating whether destination rewrite network
group is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.47 |
||||||||||||
|
Name of load balance group to use for traffic
|
OctetStringr/w Constraints: range: 0-23 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48 |
||||||||||||
|
Status field indicating whether load balanace group
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49 |
||||||||||||
|
Next hop gateway to use for traffic
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.50 |
||||||||||||
|
Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.51 |
||||||||||||
|
Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.52 |
||||||||||||
|
Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.53 |
||||||||||||
|
Used to create/delete actions according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.54 |
||||||||||||
|
Minimum depth (Kbytes) of queues for traffic.
Used for CBS in tri-color marker applications. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.55 |
||||||||||||
|
Status field indicating whether minimum depth
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.56 |
||||||||||||
|
How to encrypt traffic
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.57 |
||||||||||||
|
When enabled, don't make hardware entries for matching flows.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.58 |
||||||||||||
|
When enabled, disable the physical source port of the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.59 |
||||||||||||
|
Destination physical slot for redirected traffic
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.60 |
||||||||||||
|
Status for alaQoSActionRedirectSlotStatus field
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.61 |
||||||||||||
|
Destination physical port for redirected traffic
|
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.62 |
||||||||||||
|
Destination linkagg for redirected traffic
|
Integer32r/w Constraints: range: 0-32 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.63 |
||||||||||||
|
Status for alaQoSActionRedirectAggStatus field
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.64 |
||||||||||||
|
Destination physical slot for mirrored traffic
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.65 |
||||||||||||
|
Destination physical port for mirrored traffic
|
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66 |
||||||||||||
|
Mirroring mode
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.67 |
||||||||||||
|
Status for alaQoSActionMirrorMode field
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.68 |
||||||||||||
|
Committed Information Rate - bandwidth values in kilobits per second.
|
kilobits per secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.69 |
||||||||||||
|
Status field indicating whether CIR value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.70 |
||||||||||||
|
Committed Burst Size - bucket size in byte.
|
Integer32r/w Constraints: range: 0-2147450880 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.71 |
||||||||||||
|
Status field indicating whether CBS value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.72 |
||||||||||||
|
Peak Information Rate - bandwidth values in kilobits per second.
|
kilobits per secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.73 |
||||||||||||
|
Status field indicating whether PIR value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.74 |
||||||||||||
|
Peak Burst Size - bucket size in byte.
|
Integer32r/w Constraints: range: 0-2147450880 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.75 |
||||||||||||
|
Status field indicating whether PBS value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.76 |
||||||||||||
|
Specifies the color mode for the counters which will be used for sr/trTCM.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77 |
||||||||||||
|
RTCP Monitor status for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.78 |
||||||||||||
|
Status of the RTCP Monitor field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.79 |
||||||||||||
|
RTCP DSCP number for the traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.80 |
||||||||||||
|
Status of the RTCP DSCP field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.81 |
||||||||||||
|
Trust DSCP status for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.82 |
||||||||||||
|
Status of the Trust DSCP field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.83 |
alaQoSAppliedActionTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28
·
1 row entry
·
83 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedActionTable'
Table of QoS AppliedAction definitions
Definition of QoS AppliedAction
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of action
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.1 |
||||||||||||
|
What entity created the action.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.2 |
||||||||||||
|
Disposition of traffic using the action.
Use to filter out unwanted traffic. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.3 |
||||||||||||
|
Which drop algorithm should be used to discard traffic when
oversubscribed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.4 |
||||||||||||
|
Bandwidth at which WRED should discard most traffic.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.5 |
||||||||||||
|
Status field indicating whether WRED maximum threshold
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.6 |
||||||||||||
|
Bandwidth at which WRED should start to discard traffic.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.7 |
||||||||||||
|
Status field indicating whether WRED minimum threshold
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.8 |
||||||||||||
|
Probabilty that traffic will be dropped at WRED
maximum threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.9 |
||||||||||||
|
Status field indicating whether WRED maximum probability
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.10 |
||||||||||||
|
Minimum bandwidth (Kbits/sec) to guarantee for traffic
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.11 |
||||||||||||
|
Status field indicating whether minimum bandwidth
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.12 |
||||||||||||
|
Maximum bandwidth (Kbits/sec) allowed for traffic
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.13 |
||||||||||||
|
Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.14 |
||||||||||||
|
Peak bandwidth (Kbits/sec) allowed for traffic
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.15 |
||||||||||||
|
Status field indicating whether peak bandwidth
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.16 |
||||||||||||
|
Internal and queueing priority to use for traffic.
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.17 |
||||||||||||
|
Status field indicating whether priority
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.18 |
||||||||||||
|
When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses the same action. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.19 |
||||||||||||
|
Maximum jitter to allow for traffic.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.20 |
||||||||||||
|
Status field indicating whether jitter
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.21 |
||||||||||||
|
Maximum latency to allow for traffic.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.22 |
||||||||||||
|
Status field indicating whether latency
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.23 |
||||||||||||
|
Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.24 |
||||||||||||
|
Status field indicating whether maximum depth
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.25 |
||||||||||||
|
Maxmimum buffers for queues for traffic.
|
Integer32 Constraints: range: 0-2047 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.26 |
||||||||||||
|
Status field indicating whether maximum buffers
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.27 |
||||||||||||
|
802.1p value to stamp on traffic.
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.28 |
||||||||||||
|
Status field indicating whether 802.1p
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.29 |
||||||||||||
|
TOS value to stamp on traffic. (High 3 bits of TOS byte)
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.30 |
||||||||||||
|
Status field indicating whether TOS
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.31 |
||||||||||||
|
TOS value to stamp on traffic. (High 6 bits of TOS byte)
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.32 |
||||||||||||
|
Status field indicating whether DSCP
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.33 |
||||||||||||
|
What field to use as key for mapping 802.1p/TOS/DSCP priorities
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.34 |
||||||||||||
|
What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.35 |
||||||||||||
|
Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities. |
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.36 |
||||||||||||
|
Status field indicating whether a map group
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.37 |
||||||||||||
|
Source IP address to rewrite on traffic.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.38 |
||||||||||||
|
Status field indicating whether source rewrite IP address & mask
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.39 |
||||||||||||
|
Source rewrite IP mask to determine how much of
source IP to rewrite. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.40 |
||||||||||||
|
Name of network group containing source address/masks to rewrite
on traffic. Must be a one to on correspondence with source network group entries in the condition. |
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.41 |
||||||||||||
|
Status field indicating whether source rewrite network group
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.42 |
||||||||||||
|
Destination IP address to rewrite on traffic.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.43 |
||||||||||||
|
Status field indicating whether destination rewrite IP address
& mask is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.44 |
||||||||||||
|
Destination rewrite IP mask to determine how much of
destination IP to rewrite. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.45 |
||||||||||||
|
Name of network group containing destination address/masks to
rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition. |
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.46 |
||||||||||||
|
Status field indicating whether destination rewrite network
group is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.47 |
||||||||||||
|
Name of load balance group to use for traffic
|
OctetString Constraints: range: 0-23 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.48 |
||||||||||||
|
Status field indicating whether load balanace group
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.49 |
||||||||||||
|
Next hop gateway to use for traffic
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.50 |
||||||||||||
|
Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.51 |
||||||||||||
|
Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.52 |
||||||||||||
|
Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.53 |
||||||||||||
|
Used to create/delete actions according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.54 |
||||||||||||
|
Minimum depth (Kbytes) of queues for traffic.
Used for CBS in tri-color marker applications. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.55 |
||||||||||||
|
Status field indicating whether minimum depth
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.56 |
||||||||||||
|
How to encrypt traffic
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.57 |
||||||||||||
|
When enabled, don't make hardware entries for matching flows.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.58 |
||||||||||||
|
When enabled, disable the physical source port of the traffic.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.59 |
||||||||||||
|
Destination physical slot for redirected traffic
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.60 |
||||||||||||
|
Status for alaQoSAppliedActionRedirectSlotStatus field
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.61 |
||||||||||||
|
Destination physical port for redirected traffic
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.62 |
||||||||||||
|
Destination linkagg for redirected traffic
|
Integer32 Constraints: range: 0-32 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.63 |
||||||||||||
|
Status for alaQoSAppliedActionRedirectAggStatus field
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.64 |
||||||||||||
|
Destination physical slot for mirrored traffic
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.65 |
||||||||||||
|
Destination physical port for mirrored traffic
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.66 |
||||||||||||
|
Mirroring mode
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.67 |
||||||||||||
|
Status for alaQoSAppliedActionMirrorMode field
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.68 |
||||||||||||
|
Committed Information Rate - bandwidth values in kilobits per second.
|
kilobits per secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.69 |
||||||||||||
|
Status field indicating whether CIR value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.70 |
||||||||||||
|
Committed Burst Size - bucket size in byte.
|
Integer32r/w Constraints: range: 0-2147450880 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.71 |
||||||||||||
|
Status field indicating whether CBS value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.72 |
||||||||||||
|
Peak Information Rate - bandwidth values in kilobits per second.
|
kilobits per secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.73 |
||||||||||||
|
Status field indicating whether PIR value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.74 |
||||||||||||
|
Peak Burst Size - bucket size in byte.
|
Integer32r/w Constraints: range: 0-2147450880 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.75 |
||||||||||||
|
Status field indicating whether PBS value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.76 |
||||||||||||
|
Specifies the color mode for the counters which will be used for sr/trTCM.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.77 |
||||||||||||
|
RTCP Monitor status for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.78 |
||||||||||||
|
Status of the RTCP Monitor field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.79 |
||||||||||||
|
RTCP DSCP number for the traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.80 |
||||||||||||
|
Status of the RTCP DSCP field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.81 |
||||||||||||
|
Trust DSCP status for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.82 |
||||||||||||
|
Status of the Trust DSCP field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.83 |
alaQoSPortTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29
·
1 row entry
·
138 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSPortTable'
Table of QoS Port definitions
Definition of QoS Port
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Physical slot port resides on
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.1 |
||||||||||||||
|
Physical port number
|
Integer32 Constraints: range: 0-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.2 |
||||||||||||||
|
Pending QoS enable status for the physical port
Does not take effect until an 'Apply' command is issued |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.3 |
||||||||||||||
|
Current QoS enable status for the physical port
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.4 |
||||||||||||||
|
The type of interface QoS matches for this physical port
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.5 |
||||||||||||||
|
Status of trusting 802.1p/TOS/DSCP values.
When trusted, 802.1p/DSCP values in the packet are passed through the switch. When untrusted, 802.1p/DSCP values are set to the port defaults. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.6 |
||||||||||||||
|
802.1p priority value to use for untagged frames arriving on
the port and tagged frames when the port is untrusted. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.7 |
||||||||||||||
|
DSCP value to stamp in frames arriving on the port when the port
is untrusted |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.8 |
||||||||||||||
|
Pending maximum reservable bandwidth on the port.
Policies can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.9 |
||||||||||||||
|
Pending status field indicating whether to enforce
maximum reservable bandwidth on next 'Apply' |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.10 |
||||||||||||||
|
Current maximum reservable bandwidth on the port.
Policies can reserve up to this much bandwidth. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.11 |
||||||||||||||
|
Current status field indicating whether to enforce
maximum reservable bandwidth. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.12 |
||||||||||||||
|
Pending maximum signalled bandwidth on the port.
Signalling protocols can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.13 |
||||||||||||||
|
Pending status field indicating whether to enforce
maximum signalled bandwidth on next 'Apply' |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.14 |
||||||||||||||
|
Current maximum signalled bandwidth on the port.
Signalling protocols can reserve up to this much bandwidth. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.15 |
||||||||||||||
|
Current status field indicating whether to enforce
maximum signalled bandwidth. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.16 |
||||||||||||||
|
Pending number of default queues for the port
Overrides any switch-wide default queue setting |
Integer32r/w Constraints: range: 8-8 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.17 |
||||||||||||||
|
Current number of default queues for the port
Overrides any switch-wide default queue setting |
Integer32 Constraints: range: 8-8 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.18 |
||||||||||||||
|
Pending maximum default bandwidth (Kbits/sec).
Maximum rate for default queues on this port Does not take effect until an 'Apply' command is issued |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.19 |
||||||||||||||
|
Pending status field indicating whether to enforce
maximum default bandwidth on next 'Apply' |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.20 |
||||||||||||||
|
Current maximum default bandwidth (Kbits/sec).
Maximum rate for default queues this port |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.21 |
||||||||||||||
|
Current status field indicating whether to enforce
maximum default bandwidth. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.22 |
||||||||||||||
|
Pending maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port Does not take effect until an 'Apply' command is issued |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.23 |
||||||||||||||
|
Pending status field indicating whether to enforce
maximum depth on next 'Apply' |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.24 |
||||||||||||||
|
Current maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.25 |
||||||||||||||
|
Current status field indicating whether to enforce
maximum depth. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.26 |
||||||||||||||
|
Pending maximum buffers for egress queues.
Maximum number of buffers for queues on this port Does not take effect until an 'Apply' command is issued |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.27 |
||||||||||||||
|
Pending status field indicating whether to enforce
maximum buffers on next 'Apply' |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.28 |
||||||||||||||
|
Current maximum buffers for egress queues.
Maximum number of buffers for queues on this port |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.29 |
||||||||||||||
|
Current status field indicating whether to enforce
maximum buffers. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.30 |
||||||||||||||
|
Reset all QoS parameters to default values
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.31 |
||||||||||||||
|
Physical bandwidth of port (Kbit/sec)
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.32 |
||||||||||||||
|
Bandwidth reserved by policies on port (Kbit/sec)
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.33 |
||||||||||||||
|
Bandwidth reserved by signalling on port (Kbit/sec)
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.34 |
||||||||||||||
|
Current measured bandwidth of port (Kbits/sec)
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.35 |
||||||||||||||
|
Default low queue ID
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.36 |
||||||||||||||
|
Default medium queue ID
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.37 |
||||||||||||||
|
Default high queue ID
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.38 |
||||||||||||||
|
Default urgent queue ID
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.39 |
||||||||||||||
|
ID of the flood queue
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.40 |
||||||||||||||
|
Number of queues currently on the port
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.41 |
||||||||||||||
|
Number of queue requests on the port
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.42 |
||||||||||||||
|
Number of queue requests that failed on the port
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.43 |
||||||||||||||
|
Number of queues preempted on the port
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.44 |
||||||||||||||
|
Used to create/delete ports according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.45 |
||||||||||||||
|
Firenze priority 0 enqueue byte count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.46 |
||||||||||||||
|
Firenze priority 0 dequeue byte count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.47 |
||||||||||||||
|
Firenze priority 0 enqueue packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.48 |
||||||||||||||
|
Firenze priority 0 dequeue packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.49 |
||||||||||||||
|
Firenze priority 0 QID discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.50 |
||||||||||||||
|
Firenze priority 0 WRED discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.51 |
||||||||||||||
|
Firenze priority 0 overflow discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.52 |
||||||||||||||
|
Firenze priority 1 enqueue byte count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.53 |
||||||||||||||
|
Firenze priority 1 dequeue byte count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.54 |
||||||||||||||
|
Firenze priority 1 enqueue packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.55 |
||||||||||||||
|
Firenze priority 1 dequeue packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.56 |
||||||||||||||
|
Firenze priority 1 QID discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.57 |
||||||||||||||
|
Firenze priority 1 WRED discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.58 |
||||||||||||||
|
Firenze priority 1 overflow discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.59 |
||||||||||||||
|
Firenze priority 2 enqueue byte count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.60 |
||||||||||||||
|
Firenze priority 2 dequeue byte count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.61 |
||||||||||||||
|
Firenze priority 2 enqueue packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.62 |
||||||||||||||
|
Firenze priority 2 dequeue packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.63 |
||||||||||||||
|
Firenze priority 2 QID discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.64 |
||||||||||||||
|
Firenze priority 2 WRED discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.65 |
||||||||||||||
|
Firenze priority 2 overflow discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.66 |
||||||||||||||
|
Firenze priority 3 enqueue byte count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.67 |
||||||||||||||
|
Firenze priority 3 dequeue byte count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.68 |
||||||||||||||
|
Firenze priority 3 enqueue packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.69 |
||||||||||||||
|
Firenze priority 3 dequeue packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.70 |
||||||||||||||
|
Firenze priority 3 QID discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.71 |
||||||||||||||
|
Firenze priority 3 WRED discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.72 |
||||||||||||||
|
Firenze priority 3 overflow discard packet count
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.73 |
||||||||||||||
|
Ingress traffic classification parameter for Firenze port
What field to interpret as priority for WRED |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.74 |
||||||||||||||
|
Weight to use for low priority egress queue on fixed queue blades.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.75 |
||||||||||||||
|
Weight to use for medium priority egress queue on fixed queue blades.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.76 |
||||||||||||||
|
Weight to use for high priority egress queue on fixed queue blades.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.77 |
||||||||||||||
|
Weight to use for urgent priority egress queue on fixed queue blades.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.78 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this port |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.79 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.80 |
||||||||||||||
|
Priority 0 FIFO lower threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.81 |
||||||||||||||
|
Priority 0 FIFO upper threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.82 |
||||||||||||||
|
Priority 1 FIFO lower threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.83 |
||||||||||||||
|
Priority 1 FIFO upper threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.84 |
||||||||||||||
|
Priority 2 FIFO lower threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.85 |
||||||||||||||
|
Priority 2 FIFO upper threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.86 |
||||||||||||||
|
Priority 3 FIFO lower threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.87 |
||||||||||||||
|
Priority 3 FIFO upper threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.88 |
||||||||||||||
|
Status field indicating whether enqueuing thresholds need
to be enforced on high density module. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.89 |
||||||||||||||
|
Indicates whether this is a high-density port or not.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.90 |
||||||||||||||
|
Servicing mode for the port
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.91 |
||||||||||||||
|
Number of Free FPP rule entries
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.92 |
||||||||||||||
|
Number of Used FPP rule entries
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.93 |
||||||||||||||
|
Number of Free FPP mask entries
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.94 |
||||||||||||||
|
Number of Free FPP mask enries
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.95 |
||||||||||||||
|
Spoofed packet count
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.96 |
||||||||||||||
|
Non-spoofed packet count
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.97 |
||||||||||||||
|
Weight to use for cos queue 4.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.98 |
||||||||||||||
|
Weight to use for cos queue 5.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.99 |
||||||||||||||
|
Weight to use for cos queue 6.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.100 |
||||||||||||||
|
Weight to use for cos queue 7.
|
Integer32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.101 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.102 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.103 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.104 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.105 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.106 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.107 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.108 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.109 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.110 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.111 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.112 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.113 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.114 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.115 |
||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.116 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.117 |
||||||||||||||
|
Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.118 |
||||||||||||||
|
Status field indicating whether to enforce
minimum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.119 |
||||||||||||||
|
Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.120 |
||||||||||||||
|
Status field indicating whether to enforce
minimum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.121 |
||||||||||||||
|
Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.122 |
||||||||||||||
|
Status field indicating whether to enforce
minimum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.123 |
||||||||||||||
|
Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.124 |
||||||||||||||
|
Status field indicating whether to enforce
minimum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.125 |
||||||||||||||
|
Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.126 |
||||||||||||||
|
Status field indicating whether to enforce
minimum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.127 |
||||||||||||||
|
Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.128 |
||||||||||||||
|
Status field indicating whether to enforce
minimum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.129 |
||||||||||||||
|
Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.130 |
||||||||||||||
|
Status field indicating whether to enforce
minimum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.131 |
||||||||||||||
|
Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.132 |
||||||||||||||
|
Status field indicating whether to enforce
minimum bandwidth on queue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.133 |
||||||||||||||
|
Maximum igress bandwidth (Kbits/sec).
Maximum rate to recieve traffic in on this port |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.134 |
||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.135 |
||||||||||||||
|
This object specifies if, in egress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in egres… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.136 |
||||||||||||||
|
This object is used to monitor a slot/port on which user is interested
to get the cos egress statistics. enabled(1) -- monitor the slot/port to gather per port cos egress statistics. disabled(2) -… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.137 |
||||||||||||||
|
This object specifies if, in ingress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in ingres… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.138 |
alaQoSQueueTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32
·
1 row entry
·
19 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSQueueTable'
Table of QoS Queue definitions
Definition of QoS Queue
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Internal queue identifier
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.1 |
||||||||||
|
Physical slot queue is destined to
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.2 |
||||||||||
|
Physical port queue is destined to
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.3 |
||||||||||
|
Internal global port id of destination port
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.4 |
||||||||||
|
Type of queueing done on this queue
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.5 |
||||||||||
|
Queueing priority for the queue
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.6 |
||||||||||
|
Minimum bandwidth (Kbits/sec) given to the queue
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.7 |
||||||||||
|
Maximum bandwidth (Kbits/sec) given to the queue
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.8 |
||||||||||
|
Average measured bandwidth (Kbits/sec) for the queue
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.9 |
||||||||||
|
Minimum depth (Kbytes) of the queue
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.10 |
||||||||||
|
Maximum depth (Kbytes) of the queue
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.11 |
||||||||||
|
Maximum number of buffers for the queue
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.12 |
||||||||||
|
802.1p value queue places on traffic
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.13 |
||||||||||
|
Number of packets sent through the queue
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.14 |
||||||||||
|
Number of packets dropped trying to queue into this queue
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.15 |
||||||||||
|
Maximum measured length the queue has reached in buffers
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.16 |
||||||||||
|
Average measured length of the queue in buffers
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.17 |
||||||||||
|
Current measured length of the queue in buffers
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.18 |
||||||||||
|
Name of the action this queue was created from
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.19 |
alaQoSSlotTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33
·
1 row entry
·
33 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSSlotTable'
Table of QoS Slot definitions
Definition of QoS Slot
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Physical slot number
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.1 |
||||||||||||||
|
Physical device number on slot
|
Integer32 Constraints: range: 0-4 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.2 |
||||||||||||||
|
Type of hardware in this slot/slice
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.3 |
||||||||||||||
|
Maximum total buffers on this slot/slice
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.4 |
||||||||||||||
|
Current free buffers in list 1
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.5 |
||||||||||||||
|
Current free buffers in list 2
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.6 |
||||||||||||||
|
Buffer are not given to low priority traffic from list 1
when free buffers in list 1 is less than this threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.7 |
||||||||||||||
|
Buffer are not given to medium priority traffic from list 1
when free buffers in list 1 is less than this threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.8 |
||||||||||||||
|
Buffer are not given to high priority traffic from list 1
when free buffers in list 1 is less than this threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.9 |
||||||||||||||
|
Buffer are not given to urgent priority traffic from list 1
when free buffers in list 1 is less than this threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.10 |
||||||||||||||
|
Buffer are not given to low priority traffic from list 2
when free buffers in list 2 is less than this threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.11 |
||||||||||||||
|
Buffer are not given to medium priority traffic from list 2
when free buffers in list 2 is less than this threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.12 |
||||||||||||||
|
Buffer are not given to high priority traffic from list 2
when free buffers in list 2 is less than this threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.13 |
||||||||||||||
|
Buffer are not given to urgent priority traffic from list 2
when free buffers in list 2 is less than this threshold. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.14 |
||||||||||||||
|
Buffers denied on this slot
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.15 |
||||||||||||||
|
Average number of denied buffers over time
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.16 |
||||||||||||||
|
Buffers dropped on this slot
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.17 |
||||||||||||||
|
Average number of dropped buffers over time
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.18 |
||||||||||||||
|
Priority 0 WRED lower threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.19 |
||||||||||||||
|
Priority 0 WRED upper threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.20 |
||||||||||||||
|
Priority 1 WRED lower threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.21 |
||||||||||||||
|
Priority 1 WRED upper threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.22 |
||||||||||||||
|
Priority 2 WRED lower threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.23 |
||||||||||||||
|
Priority 2 WRED upper threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.24 |
||||||||||||||
|
Priority 3 WRED lower threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.25 |
||||||||||||||
|
Priority 3 WRED upper threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.26 |
||||||||||||||
|
The weight used in the WRED algorithm. It is used as a
negative power of 2 |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.27 |
||||||||||||||
|
Status field indicating whether WRED maximum thresholds
are specified(enable) or not(disable). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.28 |
||||||||||||||
|
Servicing mode for the CBQ thresholds for high density modules
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.29 |
||||||||||||||
|
Priority 1 CBQ threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.30 |
||||||||||||||
|
Priority 2 CBQ threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.31 |
||||||||||||||
|
Priority 3 CBQ threshold for high density module
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.32 |
||||||||||||||
|
Indicates whether this is a high-density slice or not.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.33 |
alaQoSSlotProtocolTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35
·
1 row entry
·
7 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSSlotProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSSlotProtocolTable'
Table of QoS SlotProtocol definitions
Definition of QoS SlotProtocol
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Used on high density module classification in the MAC.
This is the protocol ID used between the CAM and priority descriptors. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.1 |
||||||||||||
|
Used on high density module classification in the MAC.
This is the Ethernet type used between the CAM for classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.2 |
||||||||||||
|
Used on high density module classification in the MAC.
This is the destination SAP in an 802.3 packet. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.3 |
||||||||||||
|
Used on high density module classification in the MAC.
This is the source SAP in an 802.3 packet. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.4 |
||||||||||||
|
Used on high density module classification in the MAC.
This will enable 802.3 checking on the CAM entry. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.5 |
||||||||||||
|
Used on high density module classification in the MAC.
This positions the CAM entry in the list. Priority will put the entries in the front of the CAM, giving it priority. fallback will put the entry at the end. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.6 |
||||||||||||
|
Used to create/delete slot protoocols according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.7 |
alaQoSPortProtocolTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36
·
1 row entry
·
11 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSPortProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSPortProtocolTable'
Table of QoS PortProtocol definitions
Definition of QoS PortProtocol
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Used on high density module classification in the MAC. This
is the protocol id that needs to be changed. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.1 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
determines what type of classification is used to find priority. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.2 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
is the new priority for P0 to be mapped to. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.3 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
is the new priority for P1 to be mapped to. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.4 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
is the new priority for P2 to be mapped to. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.5 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
is the new priority for P3 to be mapped to. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.6 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
is the new priority for P4 to be mapped to. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.7 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
is the new priority for P5 to be mapped to. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.8 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
is the new priority for P6 to be mapped to. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.9 |
||||||||||||||||||||||||||||||
|
Used on high density module classification in the MAC. This
is the new priority for P7 to be mapped to. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.10 |
||||||||||||||||||||||||||||||
|
Used to create/delete rows according to RowStatus convention
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.11 |
alaQoSSlotDscpTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37
·
1 row entry
·
2 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSSlotDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSSlotDscpTable'
Table of QoS SlotDscp definitions
Definition of QoS SlotDscp
| Column | Syntax | OID |
|---|---|---|
|
Used on high density module classification in the MAC
This is the index into the DSCP table to access. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.1 |
|
Used on high density module classification in the MAC.
This is the priority of the index of the DSCP table. |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.2 |
alaQoSSlotPcamTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38
·
1 row entry
·
11 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSSlotPcamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSSlotPcamTable'
Table of QoS SlotPcam definitions
Definition of QoS SlotPcam
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Used on high density module classification in the MAC.
This is the index used in the PCAM. |
Integer32 Constraints: range: 0-24 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.1 |
||||
|
Used on high density module classification in the MAC.
This is the Ethernet type in the CAM. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.2 |
||||
|
Used on high density module classification in the MAC.
This is the destination SAP in an 802.3 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.3 |
||||
|
Used on high density module classification in the MAC.
This is the source SAP in an 802.3 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.4 |
||||
|
Used on high density module classification in the MAC.
This will enable 802.3 checking on the CAM entry. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.5 |
||||
|
Used on high density module classification in the MAC.
This identifies the protocol number of the CAM entry. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.6 |
||||
|
Used on high density module to enable the pcam entry.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.7 |
||||
|
Used on high density module to indiciate if 802.3
is enabled in the pcam entry. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.8 |
||||
|
Used on high density module to indiciate if DSAP
is enabled in the pcam entry. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.9 |
||||
|
Used on high density module to indiciate if SSAP
is enabled in the pcam entry. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.10 |
||||
|
Used on high density module to indiciate if Ethertype
is enabled in the pcam entry. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.11 |
alaQoSPortPdiTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39
·
1 row entry
·
10 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSPortPdiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSPortPdiTable'
Table of QoS PortPdi definitions
Definition of QoS PortPdi
| Column | Syntax | OID |
|---|---|---|
|
Used on high density module classification in the MAC.
This is the index used in the PDI. |
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.1 |
|
Used on high density module classification in the MAC.
This is the classification type on the port. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.2 |
|
Used on high density module classification in the MAC.
This is the internal priority mapping for a P0 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.3 |
|
Used on high density module classification in the MAC.
This is the internal priority mapping for a P1 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.4 |
|
Used on high density module classification in the MAC.
This is the internal priority mapping for a P2 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.5 |
|
Used on high density module classification in the MAC.
This is the internal priority mapping for a P3 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.6 |
|
Used on high density module classification in the MAC.
This is the internal priority mapping for a P4 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.7 |
|
Used on high density module classification in the MAC.
This is the internal priority mapping for a P5 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.8 |
|
Used on high density module classification in the MAC.
This is the internal priority mapping for a P6 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.9 |
|
Used on high density module classification in the MAC.
This is the internal priority mapping for a P7 packet. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.10 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40
·
1 row entry
·
13 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSValidityPeriodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSValidityPeriodTable'
Table of QoS ValidityPeriod definitions
Definition of QoS ValidityPeriod
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of validity period
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.1 |
||||||||||||
|
What entity created the validity period.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.2 |
||||||||||||
|
Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday is most significant. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.3 |
||||||||||||
|
Status field indicating whether the validity period
has specific active days of the month. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.4 |
||||||||||||
|
Bitfield for each month this validity period
is active. January is least significant. Decemeber is most significant. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.5 |
||||||||||||
|
Status field indicating whether the validity period
has specific active days of the week. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.6 |
||||||||||||
|
Time of day this period becomes active.
Format is 'hh:mm' |
OctetStringr/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.7 |
||||||||||||
|
Status field indicating whether the validity period
has specific active hours of the day. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.8 |
||||||||||||
|
Time of day this period becomes inactive.
Format is 'hh:mm' |
OctetStringr/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.9 |
||||||||||||
|
Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm' |
OctetStringr/w Constraints: range: 0-19 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.10 |
||||||||||||
|
Status field indicating whether the validity period
has a specific active date-time interval. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.11 |
||||||||||||
|
Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm' |
OctetStringr/w Constraints: range: 0-19 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.12 |
||||||||||||
|
Used to create/delete validity periods according
to the RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.13 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41
·
1 row entry
·
13 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedValidityPeriodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedValidityPeriodTable'
Table of QoS AppliedValidityPeriod definitions
Definition of QoS AppliedValidityPeriod
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of validity period
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.1 |
||||||||||||
|
What entity created the validity period.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.2 |
||||||||||||
|
Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday is most significant. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.3 |
||||||||||||
|
Status field indicating whether the validity period
has specific active days of the month. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.4 |
||||||||||||
|
Bitfield for each month this validity period
is active. January is least significant. Decemeber is most significant. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.5 |
||||||||||||
|
Status field indicating whether the validity period
has specific active days of the week. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.6 |
||||||||||||
|
Time of day this period becomes active.
Format is 'hh:mm' |
OctetString Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.7 |
||||||||||||
|
Status field indicating whether the validity period
has specific active hours of the day. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.8 |
||||||||||||
|
Time of day this period becomes inactive.
Format is 'hh:mm' |
OctetString Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.9 |
||||||||||||
|
Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm' |
OctetString Constraints: range: 0-19 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.10 |
||||||||||||
|
Status field indicating whether the validity period
has a specific active date-time interval. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.11 |
||||||||||||
|
Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm' |
OctetString Constraints: range: 0-19 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.12 |
||||||||||||
|
Used to create/delete validity periods according
to the RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.13 |
alaQoSImportTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42
·
1 row entry
·
9 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSImportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSImportTable'
Table of QoS Import definitions
Definition of QoS Import
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Index of entry in import list
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.1 |
||||||||||||
|
Text or filename to import
|
OctetString Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.2 |
||||||||||||
|
Precedence to use for policies imported from file
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.3 |
||||||||||||
|
Prefix for policy names that are imported
|
OctetStringr/w Constraints: range: 0-11 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.4 |
||||||||||||
|
Slot on which to apply imported policy(s)
|
Integer32r/w Constraints: range: 0-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.5 |
||||||||||||
|
Starting port on which to apply imported policy(s)
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.6 |
||||||||||||
|
Ending port on which to apply imported policy(s)
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.7 |
||||||||||||
|
Portgroup on which to apply imported policy(s)
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.8 |
||||||||||||
|
Used to create/delete imports according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.9 |
alaQoSAppliedImportTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43
·
1 row entry
·
9 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedImportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedImportTable'
Table of QoS AppliedImport definitions
Definition of QoS AppliedImport
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Index of entry in import list
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.1 |
||||||||||||
|
Text or filename to import
|
OctetString Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.2 |
||||||||||||
|
Precedence to use for policies imported from file
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.3 |
||||||||||||
|
Prefix for policy names that are imported
|
OctetString Constraints: range: 0-11 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.4 |
||||||||||||
|
Slot on which to apply imported policy(s)
|
Integer32 Constraints: range: 0-52 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.5 |
||||||||||||
|
Starting port on which to apply imported policy(s)
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.6 |
||||||||||||
|
Ending port on which to apply imported policy(s)
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.7 |
||||||||||||
|
Portgroup on which to apply imported policy(s)
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.8 |
||||||||||||
|
Used to create/delete imports according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.9 |
alaQoSRuleGroupsTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44
·
1 row entry
·
5 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSRuleGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSRuleGroupsTable'
Table of QoS RuleGroups definitions
Definition of QoS RuleGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.1 |
||||||||||||
|
What entity created the rule group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.2 |
||||||||||||
|
Type of rule group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.3 |
||||||||||||
|
Is this rule grop enabled or not
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.4 |
||||||||||||
|
Used to create/delete rule groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.5 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45
·
1 row entry
·
5 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedRuleGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedRuleGroupsTable'
Table of QoS AppliedRuleGroups definitions
Definition of QoS AppliedRuleGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.1 |
||||||||||||
|
What entity created the service group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.2 |
||||||||||||
|
What entity created the rule group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.3 |
||||||||||||
|
Is this rule grop enabled or not
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.4 |
||||||||||||
|
Used to create/delete rule groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.5 |
alaQoSRuleGroupTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46
·
1 row entry
·
10 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSRuleGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSRuleGroupTable'
Table of QoS RuleGroup definitions
Definition of QoS RuleGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule in rule group entry
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.1 |
||||||||||||
|
Number of times this rule has been matched.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.2 |
||||||||||||
|
Which rule statistics counters to update if not all are available
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.3 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.4 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.5 |
||||||||||||
|
Used to create/delete rule group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.6 |
||||||||||||
|
Packets mathcing the rule per second .
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.7 |
||||||||||||
|
Bytes mathcing the rule per second .
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.8 |
||||||||||||
|
Counter for packets matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.9 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.10 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47
·
1 row entry
·
10 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedRuleGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedRuleGroupTable'
Table of QoS AppliedRuleGroup definitions
Definition of QoS AppliedRuleGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule in rule group entry
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.1 |
||||||||||||
|
Number of times this rule has been matched.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.2 |
||||||||||||
|
Which rule statistics counters to update if not all are available
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.3 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.4 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.5 |
||||||||||||
|
Used to create/delete rule group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.6 |
||||||||||||
|
Shows the packet rate for policy list
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.7 |
||||||||||||
|
Shows the bit rate for policy list
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.8 |
||||||||||||
|
Counter for packets matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.9 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.10 |
alaQoSVlanGroupsTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSVlanGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSVlanGroupsTable'
Table of QoS Vlan Groups definitions
Definition of QoS Vlan Groups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of Vlan group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.1 |
||||||||||||
|
What entity created the Vlan group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.2 |
||||||||||||
|
Used to create/delete Vlan groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedVlanGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedVlanGroupsTable'
Table of QoS Applied Vlan Groups definitions
Definition of QoS Applied Vlan Groups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of Applied Vlan group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.1 |
||||||||||||
|
What entity created the Vlan group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.2 |
||||||||||||
|
Used to create/delete Vlan groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.3 |
alaQoSVlanGroupTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSVlanGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSVlanGroupTable'
Table of QoS Vlan Group definitions
Definition of QoS Vlan Group
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Vlan range start for vlan group entry
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.1 |
||||||||||||
|
Vlan range end for vlan group entry
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.2 |
||||||||||||
|
Used to create/delete vlan group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51
·
1 row entry
·
3 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSAppliedVlanGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSAppliedVlanGroupTable'
Table of QoS Applied Vlan Group definitions
Definition of QoS Applied Vlan Group
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Vlan range start for vlan group entry
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.1 |
||||||||||||
|
Vlan range end for vlan group entry
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.2 |
||||||||||||
|
Used to create/delete vlan group entries according
to the RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.3 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52
·
1 row entry
·
9 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSHwLoopbackProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSHwLoopbackProfileTable'
Table of QoS Hw Loopback Profiles
Definition of QoS Hw Loopback Profiles
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of Profile Name
|
OctetString Constraints: range: 1-31 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.1 |
||||||||||||
|
Source MAC address to use for Hardware Loopback
profile configuration |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.2 |
||||||||||||
|
Destination MAC address to use for Hardware Loopback
profile configuration |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.3 |
||||||||||||
|
Vlan used in Hardware Loopback Profile Config
|
Integer32r/w Constraints: range: 1-4094 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.4 |
||||||||||||
|
Loopback Port ifindex used in Hardware Loopback Profile Config
|
IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.5 |
||||||||||||
|
The type of Hardware Profile Config, inward and outward
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.6 |
||||||||||||
|
The status of the Hardware Profile Config
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.7 |
||||||||||||
|
Used to create/delete the Profile Config
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.8 |
||||||||||||
|
A Number given to uniquely identify the SAP.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.9 |
alaQoSQueueStatsTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53
·
1 row entry
·
11 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSQueueStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSQueueStatsTable'
Table of QoS Queue Stats definitions
Definition of QoS Queue Stats
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Internal queue identifier
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.1 |
||||
|
Physical slot queue is destined to
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.2 |
||||
|
Physical port queue is destined to
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.3 |
||||
|
Transmit queue number
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.4 |
||||
|
Transmit priority for the queue
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.5 |
||||
|
Number of packets sent through the queue
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.6 |
||||
|
Number of packets dropped trying to queue into this queue
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.7 |
||||
|
Number of bytes sent through the queue
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.8 |
||||
|
Number of bytes dropped trying to queue into this queue
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.9 |
||||
|
Rate(Mbits/sec) sent through the queue
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.10 |
||||
|
Rate(Mbits/sec) dropped trying to queue into this queue
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.11 |
alaQoSExtendedRuleTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54
·
1 row entry
·
12 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSExtendedRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSExtendedRuleTable'
Table of QoS Rule definitions for extending port group behavior on individual port basis or group basis
Definition of QoS Rule
| Column | Syntax | OID |
|---|---|---|
|
Slot on which rate-limit is enabled.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.1 |
|
Port on which rate-limit is enabled.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.2 |
|
Number of times this rule has been matched.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.3 |
|
Counter for packets matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.4 |
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.5 |
|
Counter for packets out of the bandwidth parameters
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.6 |
|
Counter for bytes out of the bandwidth parameters
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.7 |
|
Counter for the number of packets which are green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.8 |
|
Counter for the number of packets which are yellow compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.9 |
|
Counter for the number of packets which are red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.10 |
|
Counter for the number of packets which are non-green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.11 |
|
Counter for the number of packets which are non-red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.12 |
alaQoSDSCPTable
table.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55
·
1 row entry
·
4 columns
Uses the alcatel variant from
Command help
/opt/observium/mibs/alcatel.
Walk alaQoSDSCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-QOS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-QOS-MIB::alaQoSDSCPTable'
Table of QoS Condition definitions
Definition of QoS DSCP
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
DSCP Entry number for the traffic.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.1 |
||||||||||||
|
DSCP priority for the traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.2 |
||||||||||||
|
DSCP drop precedence for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.3 |
||||||||||||
|
RowStatus entry for QoS DSCP.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.4 |