ALCATEL-IND1-PIM-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
11
Rows
11
Columns
145
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1 · 1 row entry · 28 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimInterfaceTable'
The (conceptual) table listing the router's PIM interfaces.
PIM is enabled on all interfaces listed in this table.
alaPimInterfaceEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1
An entry (conceptual row) in the alaPimInterfaceTable. This
entry is preserved on agent restart.
Column Syntax OID
The ifIndex value of this PIM interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.1
The IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g. IPv4
and IPv6, however the traffic is considered to be logically
separate.
INET-ADDRESS-MIBInetVersion
Type Values:
0unknown
1ipv4
2ipv6
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.2
The address type of this PIM interface.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.3
The primary IP address of this router on this PIM
interface. The InetAddressType is given by the
alaPimInterfaceAddressType object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.4
The value of the Generation ID this router inserted in the
last PIM Hello message it sent on this interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.5
The primary IP address of the Designated Router on this PIM
interface. The InetAddressType is given by the
alaPimInterfaceAddressType object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.6
The Designated Router Priority value inserted into the DR
Priority option on this interface. Numerically higher
values for this object indicate higher priorities.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.7
Evaluates to TRUE if all routers on this interface are
using the DR Priority option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.8
The frequency at which PIM Hello messages are transmitted
on this interface. This object corresponds to the
'Hello_Period' timer value defined in the PIM-SM
specification. A value of zero represents an 'infinite'
inte…
secondsUnsigned32r/w
Constraints:
range: 0-18000
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.9
The maximum time before this router sends a triggered PIM
Hello message on this interface. This object corresponds to
the 'Trigered_Hello_Delay' timer value defined in the PIM-SM
specification. A value of zero has no …
secondsUnsigned32r/w
Constraints:
range: 0-60
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.10
The value set in the Holdtime field of PIM Hello messages
transmitted on this interface. A value of 65535 represents
an 'infinite' holdtime. Implementations are recommended
to use a holdtime that is 3.5 times the valu…
secondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.11
The frequency at which this router sends PIM Join/Prune
messages on this PIM interface. This object corresponds to
the 't_periodic' timer value defined in the PIM-SM
specification. A value of zero represents an 'infin…
secondsUnsigned32r/w
Constraints:
range: 0-18000
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.12
The value inserted into the Holdtime field of a PIM
Join/Prune message sent on this interface. A value of 65535
represents an 'infinite' holdtime. Implementations are
recommended to use a holdtime that is 3.5 times th…
secondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.13
The minimum number of PIM DF-Election messages that must be
lost in order for DF election on this interface to fail.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.14
Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.15
The expected propagation delay between PIM routers on this
network or link.

This router inserts this value into the Propagation_Delay
field of the LAN Prune Delay option in the PIM Hello
messages sent on …
millisecondsUnsigned32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.16
The value this router inserts into the Override_Interval
field of the LAN Prune Delay option in the PIM Hello
messages it sends on this interface.

When overriding a prune, PIM routers pick a random timer
millisecondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.17
The Effective Propagation Delay on this interface. This
object is always 500 if alaPimInterfaceLanDelayEnabled is
FALSE.
millisecondsUnsigned32
Constraints:
range: 0-32767
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.18
The Effective Override Interval on this interface. This
object is always 2500 if alaPimInterfaceLanDelayEnabled is
FALSE.
millisecondsUnsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.19
Whether join suppression is enabled on this interface.
This object is always TRUE if alaPimInterfaceLanDelayEnabled is
FALSE.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.20
Evaluates to TRUE if all routers on this interface are
using the Bidirectional-PIM Capable option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.21
Whether or not this interface is a PIM domain border. This
includes acting as a border for PIM Bootstrap Router (BSR)
messages, if the BSR mechanism is in use.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.22
Whether this interface is a 'stub interface'. If this
object is set to TRUE, then no PIM packets are sent out this
interface, and any received PIM packets are ignored.

Setting this object to TRUE is a se…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.23
The minimum interval that must transpire between two
successive Prunes sent by a router. This object corresponds
to the 't_limit' timer value defined in the PIM-DM
specification. This object is used only by PIM-DM.
secondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.24
The minimum interval that must transpire between two
successive Grafts sent by a router. This object corresponds
to the 'Graft_Retry_Period' timer value defined in the
PIM-DM specification. This object is used only by…
secondsUnsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.25
Evaluates to TRUE if all routers on this interface are
using the State Refresh option. This object is used only by
PIM-DM.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.26
The status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.

This status object can be set to active(1) without setting
any other columna…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.27
The storage type for this row. Rows having the value
'permanent' need not allow write-access to any columnar
objects in the row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.1.1.28
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2 · 1 row entry · 15 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimNeighborTable'
The (conceptual) table listing the router's PIM neighbors.
alaPimNeighborEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1
An entry (conceptual row) in the alaPimNeighborTable.
Column Syntax OID
The value of ifIndex for the interface used to reach this
PIM neighbor.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.1
The address type of this PIM neighbor.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.2
The primary IP address of this PIM neighbor. The
InetAddressType is given by the alaPimNeighborAddressType
object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.3
Evaluates to TRUE if this neighbor is using the Generation
ID option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.4
The value of the Generation ID from the last PIM Hello
message received from this neighbor. This object is always
zero if alaPimNeighborGenerationIDPresent is FALSE.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.5
The time since this PIM neighbor (last) became a neighbor
of the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.6
The minimum time remaining before this PIM neighbor will
be aged out. The value zero indicates that this PIM
neighbor will never be aged out.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.7
Evaluates to TRUE if this neighbor is using the DR Priority
option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.8
The value of the Designated Router Priority from the last
PIM Hello message received from this neighbor. This object
is always zero if alaPimNeighborDRPriorityPresent is FALSE.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.9
Evaluates to TRUE if this neighbor is using the LAN Prune
Delay option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.10
Whether the T bit was set in the LAN Prune Delay option
received from this neighbor. The T bit specifies the
ability of the neighbor to disable join suppression. This
object is always TRUE if alaPimNeighborLanPruneDel…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.11
The value of the Propagation_Delay field of the LAN Prune
Delay option received from this neighbor. This object is
always zero if alaPimNeighborLanPruneDelayPresent is FALSE.
Unsigned32
Constraints:
range: 0-32767
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.12
The value of the Override_Interval field of the LAN Prune
Delay option received from this neighbor. This object is
always zero if alaPimNeighborLanPruneDelayPresent is FALSE.
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.13
Evaluates to TRUE if this neighbor is using the
Bidirectional-PIM Capable option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.14
Evaluates to TRUE if this neighbor is using the State
Refresh Capable option. This object is used only by
PIM-DM.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.2.1.15
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.3 · 1 row entry · 4 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimNbrSecAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimNbrSecAddressTable'
The (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the alaPimNeighborTable defined above).
alaPimNbrSecAddressEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.3.1
An entry (conceptual row) in the alaPimNbrSecAddressTable.
Column Syntax OID
The value of ifIndex for the interface used to reach this
PIM neighbor.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.3.1.1
The address type of this PIM neighbor.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.3.1.2
The primary IP address of this PIM neighbor. The
InetAddressType is given by the alaPimNbrSecAddressType
object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.3.1.3
The secondary IP address of this PIM neighbor. The
InetAddressType is given by the alaPimNbrSecAddressType
object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.3.1.4
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4 · 1 row entry · 20 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimStarGTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimStarGTable'
The (conceptual) table listing the non-interface specific
(*,G) state that PIM has.
alaPimStarGEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1
An entry (conceptual row) in the alaPimStarGTable.
Column Syntax OID
The address type of this multicast group.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.1
The multicast group address. The InetAddressType is given
by the alaPimStarGAddressType object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.2
The time since this entry was created by the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.3
Whether this entry represents an ASM (Any Source Multicast,
used with PIM-SM) or BIDIR-PIM group.
AlaPimMode
Type Values:
1none
2ssm
3asm
4bidir
5dm
6other
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.4
The address type of the Rendezvous Point (RP), or
unknown(0) if the RP address is unknown.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.5
The address of the Rendezvous Point (RP) for the group.
The InetAddressType is given by the alaPimStarGRPAddressType.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.6
The mechanism by which the PIM mode and RP for the group
were learned.
AlaPimGroupMappingOriginType
Type Values:
1fixed
2configRp
3configSsm
4bsr
5autoRP
6embedded
7other
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.7
Whether the local router is the RP for the group.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.8
Whether the local router should join the RP tree for the
group. This corresponds to the state of the upstream (*,G)
state machine in the PIM-SM specification.
Enumeration
Enumerated Values:
1notJoined
2joined
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.9
The time remaining before the local router next sends a
periodic (*,G) Join message on alaPimStarGRPFIfIndex. This
timer is called the (*,G) Upstream Join Timer in the PIM-SM
specification. This object is zero if the …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.10
The primary address type of the upstream neighbor, or
unknown(0) if the upstream neighbor address is unknown or is
not a PIM neighbor.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.11
The primary address of the neighbor on alaPimStarGRPFIfIndex
that the local router is sending periodic (*,G) Join
messages to. The InetAddressType is given by the
alaPimStarGUpstreamNeighborType object. This address i…
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.12
The value of ifIndex for the RPF interface towards the RP,
or zero if the RPF interface is unknown.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.13
The address type of the RPF next hop towards the RP, or
unknown(0) if the RPF next hop is unknown.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.14
The address of the RPF next hop towards the RP. The
InetAddressType is given by the alaPimStarGRPFNextHopType
object. This address is called MRIB.next_hop(RP(G))
in the PIM-SM specification.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.15
The routing mechanism via which the route used to find the
RPF interface towards the RP was learned.
IANA-RTPROTO-MIBIANAipRouteProtocol
Type Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9isIs
10esIs
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15idpr
16ciscoEigrp
17dvmrp
18rpl
19dhcp
20ttdp
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.16
The IP address which when combined with the corresponding
value of alaPimStarGRPFRoutePrefixLength identifies the route
used to find the RPF interface towards the RP. The
InetAddressType is given by the alaPimStarGRPFN…
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.17
The prefix length which when combined with the
corresponding value of alaPimStarGRPFRouteAddress identifies
the route used to find the RPF interface towards the RP.
The InetAddressType is given by the alaPimStarGRPFNext…
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.18
The metric preference of the route used to find the RPF
interface towards the RP.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.19
The routing metric of the route used to find the RPF
interface towards the RP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.4.1.20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5 · 1 row entry · 12 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimStarGITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimStarGITable'
The (conceptual) table listing the interface-specific (*,G)
state that PIM has.
alaPimStarGIEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1
An entry (conceptual row) in the alaPimStarGITable.
Column Syntax OID
The ifIndex of the interface that this entry corresponds
to.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.1
The time since this entry was created by the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.2
Whether the local router has (*,G) local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_include(*,G,I) in the
PIM-SM specification.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.3
The state resulting from (*,G) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (*,G) state machine in the
PIM-SM specification.
Enumeration
Enumerated Values:
1noInfo
2join
3prunePending
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.4
The time remaining before the local router acts on a (*,G)
Prune message received on this interface, during which the
router is waiting to see whether another downstream router
will override the Prune message. This tim…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.5
The time remaining before (*,G) Join state for this
interface expires. This timer is called the (*,G) Join
Expiry Timer in the PIM-SM specification. This object is
zero if the timer is not running. A value of 'FFFFFF…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.6
The (*,G) Assert state for this interface. This
corresponds to the state of the per-interface (*,G) Assert
state machine in the PIM-SM specification. If
alaPimStarGPimMode is 'bidir', this object must be 'noInfo'.
Enumeration
Enumerated Values:
1noInfo
2iAmAssertWinner
3iAmAssertLoser
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.7
If alaPimStarGIAssertState is 'iAmAssertWinner', this is the
time remaining before the local router next sends a (*,G)
Assert message on this interface. If alaPimStarGIAssertState
is 'iAmAssertLoser', this is the time …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.8
If alaPimStarGIAssertState is 'iAmAssertLoser', this is the
address type of the assert winner; otherwise, this object is
unknown(0).
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.9
If alaPimStarGIAssertState is 'iAmAssertLoser', this is the
address of the assert winner. The InetAddressType is given
by the alaPimStarGIAssertWinnerAddressType object.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.10
If alaPimStarGIAssertState is 'iAmAssertLoser', this is the
metric preference of the route to the RP advertised by the
assert winner; otherwise, this object is zero.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.11
If alaPimStarGIAssertState is 'iAmAssertLoser', this is the
routing metric of the route to the RP advertised by the
assert winner; otherwise, this object is zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.5.1.12
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6 · 1 row entry · 27 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimSGTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimSGTable'
The (conceptual) table listing the non-interface specific
(S,G) state that PIM has.
alaPimSGEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1
An entry (conceptual row) in the alaPimSGTable.
Column Syntax OID
The address type of the source and multicast group for this
entry.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.1
The multicast group address for this entry. The
InetAddressType is given by the alaPimSGAddressType object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.2
The source address for this entry. The InetAddressType is
given by the alaPimSGAddressType object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.3
The time since this entry was created by the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.4
Whether alaPimSGGrpAddress is an SSM (Source Specific
Multicast, used with PIM-SM) or ASM (Any Source Multicast,
used with PIM-SM), or DM (Dense Mode) group.
AlaPimMode
Type Values:
1none
2ssm
3asm
4bidir
5dm
6other
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.5
Whether the local router should join the shortest-path tree
for the source and group represented by this entry. This
corresponds to the state of the upstream (S,G) state machine
in the PIM-SM specification.
Enumeration
Enumerated Values:
0notApplicable
1notJoined
2joined
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.6
The time remaining before the local router next sends a
periodic (S,G) Join message on alaPimSGRPFIfIndex. This timer
is called the (S,G) Upstream Join Timer in the PIM-SM
specification. This object is zero if the tim…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.7
The primary address of the neighbor on alaPimSGRPFIfIndex that
the local router is sending periodic (S,G) Join messages to.
This is zero if the RPF next hop is unknown or is not a
PIM neighbor. The InetAddressType is g…
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.8
The value of ifIndex for the RPF interface towards the
source, or zero if the RPF interface is unknown.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.9
The address type of the RPF next hop towards the source, or
unknown(0) if the RPF next hop is unknown.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.10
The address of the RPF next hop towards the source. The
InetAddressType is given by the alaPimSGRPFNextHopType. This
address is called MRIB.next_hop(S) in the PIM-SM
specification.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.11
The routing mechanism via which the route used to find the
RPF interface towards the source was learned.
IANA-RTPROTO-MIBIANAipRouteProtocol
Type Values:
1other
2local
3netmgmt
4icmp
5egp
6ggp
7hello
8rip
9isIs
10esIs
11ciscoIgrp
12bbnSpfIgp
13ospf
14bgp
15idpr
16ciscoEigrp
17dvmrp
18rpl
19dhcp
20ttdp
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.12
The IP address which when combined with the corresponding
value of alaPimSGRPFRoutePrefixLength identifies the route used
to find the RPF interface towards the source. The
InetAddressType is given by the alaPimSGRPFNex…
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.13
The prefix length which when combined with the
corresponding value of alaPimSGRPFRouteAddress identifies the
route used to find the RPF interface towards the source.
The InetAddressType is given by the alaPimSGRPFNextHo…
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.14
The metric preference of the route used to find the RPF
interface towards the source.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.15
The routing metric of the route used to find the RPF
interface towards the source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.16
Whether the SPT bit is set; and therefore whether
forwarding is taking place on the shortest-path tree.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.17
The time remaining before, in the absence of explicit (S,G)
local membership or (S,G) Join messages received to maintain
it, this (S,G) state expires. This timer is called the
(S,G) Keepalive Timer in the PIM-SM specif…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.18
Whether the local router should encapsulate (S,G) data
packets in Register messages and send them to the RP. This
corresponds to the state of the per-(S,G) Register state
machine in the PIM-SM specification. This obje…
Enumeration
Enumerated Values:
1noInfo
2join
3joinPending
4prune
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.19
If alaPimSGDRRegisterState is 'prune', this is the time
remaining before the local router sends a Null-Register
message to the RP. If alaPimSGDRRegisterState is
'joinPending', this is the time remaining before the loca…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.20
The address type of the first PIM Multicast Border Router
to send a Register message with the Border bit set. This
object is unknown(0) if the local router is not the RP for
the group.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.21
The IP address of the first PIM Multicast Border Router to
send a Register message with the Border bit set. The
InetAddressType is given by the
alaPimSGRPRegisterPMBRAddressType object.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.22
Whether the local router has pruned itself from the tree.
This corresponds to the state of the upstream prune (S,G)
state machine in the PIM-DM specification. This object is
used only by PIM-DM.
Enumeration
Enumerated Values:
0notApplicable
1forwarding
2ackpending
3pruned
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.23
The time remaining before the local router may send a (S,G)
Prune message on alaPimSGRPFIfIndex. This timer is called the
(S,G) Prune Limit Timer in the PIM-DM specification. This
object is zero if the timer is not ru…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.24
Whether the router is an originator for an (S,G) message
flow. This corresponds to the state of the per-(S,G)
Originator state machine in the PIM-DM specification. This
object is used only by PIM-DM.
Enumeration
Enumerated Values:
0notApplicable
1notOriginator
2originator
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.25
If alaPimSGOriginatorState is 'originator', this is the time
remaining before the local router reverts to a notOriginator
state. Otherwise, this is zero. This timer is called the
Source Active Timer in the PIM-DM spec…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.26
If alaPimSGOriginatorState is 'originator', this is the time
remaining before the local router sends a State Refresh
message. Otherwise, this is zero. This timer is called the
State Refresh Timer in the PIM-DM specifi…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.6.1.27
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7 · 1 row entry · 12 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimSGITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimSGITable'
The (conceptual) table listing the interface-specific (S,G)
state that PIM has.
alaPimSGIEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1
An entry (conceptual row) in the alaPimSGITable.
Column Syntax OID
The ifIndex of the interface that this entry corresponds
to.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.1
The time since this entry was created by the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.2
Whether the local router has (S,G) local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_include(S,G,I) in the
PIM-SM specification.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.3
The state resulting from (S,G) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (S,G) state machine in the
PIM-SM and PIM-DM specification.
Enumeration
Enumerated Values:
1noInfo
2join
3prunePending
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.4
The time remaining before the local router acts on an (S,G)
Prune message received on this interface, during which the
router is waiting to see whether another downstream router
will override the Prune message. This ti…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.5
The time remaining before (S,G) Join state for this
interface expires. This timer is called the (S,G) Join
Expiry Timer in the PIM-SM specification. This object is
zero if the timer is not running. A value of 'FFFFFF…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.6
The (S,G) Assert state for this interface. This
corresponds to the state of the per-interface (S,G) Assert
state machine in the PIM-SM specification.
Enumeration
Enumerated Values:
1noInfo
2iAmAssertWinner
3iAmAssertLoser
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.7
If alaPimSGIAssertState is 'iAmAssertWinner', this is the time
remaining before the local router next sends a (S,G) Assert
message on this interface. If alaPimSGIAssertState is
'iAmAssertLoser', this is the time remain…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.8
If alaPimSGIAssertState is 'iAmAssertLoser', this is the
address type of the assert winner; otherwise, this object is
unknown(0).
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.9
If alaPimSGIAssertState is 'iAmAssertLoser', this is the
address of the assert winner. The InetAddressType is given
by the alaPimSGIAssertWinnerAddressType object.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.10
If alaPimSGIAssertState is 'iAmAssertLoser', this is the
metric preference of the route to the source advertised by
the assert winner; otherwise, this object is zero.
Unsigned32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.11
If alaPimSGIAssertState is 'iAmAssertLoser', this is the
routing metric of the route to the source advertised by the
assert winner; otherwise, this object is zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.7.1.12
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.8 · 1 row entry · 4 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimSGRptTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimSGRptTable'
The (conceptual) table listing the non-interface specific
(S,G,rpt) state that PIM has.
alaPimSGRptEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.8.1
An entry (conceptual row) in the alaPimSGRptTable.
Column Syntax OID
The source address for this entry. The InetAddressType is
given by the alaPimStarGAddressType object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.8.1.1
The time since this entry was created by the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.8.1.2
Whether the local router should prune the source off the RP
tree. This corresponds to the state of the upstream
(S,G,rpt) state machine for triggered messages in the PIM-SM
specification.
Enumeration
Enumerated Values:
1rptNotJoined
2pruned
3notPruned
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.8.1.3
The time remaining before the local router sends a
triggered (S,G,rpt) Join message on alaPimStarGRPFIfIndex.
This timer is called the (S,G,rpt) Upstream Override Timer
in the PIM-SM specification. This object is zero …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.8.1.4
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.9 · 1 row entry · 6 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimSGRptITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimSGRptITable'
The (conceptual) table listing the interface-specific
(S,G,rpt) state that PIM has.
alaPimSGRptIEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.9.1
An entry (conceptual row) in the alaPimSGRptITable.
Column Syntax OID
The ifIndex of the interface that this entry corresponds
to.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.9.1.1
The time since this entry was created by the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.9.1.2
Whether the local router has both (*,G) include local
membership and (S,G) exclude local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_exclude(S,G,I) i…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.9.1.3
The state resulting from (S,G,rpt) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (S,G,rpt) state machine in
the PIM-SM specification.
Enumeration
Enumerated Values:
1noInfo
2prune
3prunePending
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.9.1.4
The time remaining before the local router starts pruning
this source off the RP tree. This timer is called the
(S,G,rpt) Prune-Pending Timer in the PIM-SM specification.
This object is zero if the timer is not running.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.9.1.5
The time remaining before (S,G,rpt) Prune state for this
interface expires. This timer is called the (S,G,rpt)
Prune Expiry Timer in the PIM-SM specification. This object
is zero if the timer is not running. A value …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.9.1.6
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11 · 1 row entry · 9 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimStaticRPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimStaticRPTable'
This table is used to create and manage static
configuration of RPs.
          
If the group prefixes configured for two or more rows in
this table overlap, the row with the greatest value of
alaPimStaticRPGrpPrefixLength is used for the overlapping
range.
alaPimStaticRPEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1
An entry (conceptual row) in the alaPimStaticRPTable. This
entry is preserved on agent restart.
Column Syntax OID
The address type of this entry.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.1
The multicast group address which, when combined with
alaPimStaticRPGrpPrefixLength, gives the group prefix for this
entry. The InetAddressType is given by the
alaPimStaticRPAddressType object.

This addr…
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.2
The multicast group prefix length, which, when combined
with alaPimStaticRPGrpAddress, gives the group prefix for this
entry. The InetAddressType is given by the
alaPimStaticRPAddressType object. If alaPimStaticRPAddr…
Unsigned32
Constraints:
range: 4-128
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.3
The IP address of the RP to be used for groups within this
group prefix. The InetAddressType is given by the
alaPimStaticRPAddressType object.
OctetStringr/w
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.4
The PIM mode to be used for groups in this group prefix.

If this object is set to ssm(2) or dm(5), then
alaPimStaticRPRPAddress must be set to zero. No RP
operations are ever possible for PIM Mode SSM o…
AlaPimModer/w
Type Values:
1none
2ssm
3asm
4bidir
5dm
6other
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.5
Whether this static RP configuration overrides RP
information learned dynamically for groups in this group
prefix.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.6
The value for alaPimGroupMappingPrecedence to be used for this
static RP configuration. This allows fine control over
which configuration is overridden by this static
configuration.

If alaPimStaticRPOver…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.7
The status of this row, by which rows in this table can
be created and destroyed.

This status object cannot be set to active(1) before valid
values have been written to alaPimStaticRPRPAddress.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.8
The storage type for this row. Rows having the value
'permanent' need not allow write-access to any columnar
objects in the row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.11.1.9
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13 · 1 row entry · 8 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaPimGroupMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-PIM-STD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-PIM-STD-MIB::alaPimGroupMappingTable'
The (conceptual) table listing mappings from multicast
group prefixes to the PIM mode and RP address to use for
groups within that group prefix.
          
Rows in this table are created for a variety of reasons,
indicated by the value of the alaPimGroupMappingOrigin object.
          
-  Rows with a alaPimGroupMappingOrigin value of 'fixed' are
   created automatically by the router at startup, to
   correspond to the well-defined prefixes of link-local and
   unroutable group addresses.  These rows are never
   destroyed.
          
-  Rows with a alaPimGroupMappingOrigin value of 'embedded' are
   created by the router to correspond to group prefixes
   that are to be treated as being in Embedded-RP format.
          
-  Rows with a alaPimGroupMappingOrigin value of 'configRp' are
   created and destroyed as a result of rows in the
   alaPimStaticRPTable being created and destroyed.
          
-  Rows with a alaPimGroupMappingOrigin value of 'configSsm'
   are created and destroyed as a result of configuration of
   SSM address ranges to the local router.
          
-  Rows with a alaPimGroupMappingOrigin value of 'bsr' are
   created as a result of running the PIM Bootstrap Router
   (BSR) mechanism.  If the local router is not the elected
   BSR, these rows are created to correspond to group
   prefixes in the PIM Bootstrap messages received from the
   elected BSR.  If the local router is the elected BSR,
   these rows are created to correspond to group prefixes in
   the PIM Bootstrap messages that the local router sends.
   In either case, these rows are destroyed when the group
   prefixes are timed out by the BSR mechanism.
          
-  Rows with a alaPimGroupMappingOrigin value of 'other' are
   created and destroyed according to some other mechanism
   not specified here.
          
Given the collection of rows in this table at any point in
time, the PIM mode and RP address to use for a particular
group is determined using the following algorithm.
          
1. From the set of all rows, the subset whose group prefix
   contains the group in question are selected.
          
2. If there are no such rows, the behavior is undefined.
          
3. From the selected subset of rows, the subset that have
   the greatest value of alaPimGroupMappingGrpPrefixLength are
   selected.
          
4. If there are multiple selected rows, and a subset are 
   defined by alaPimStaticRPTable (alaPimGroupMappingOrigin value
   of 'configRp') with alaPimStaticRPOverrideDynanic set to
   TRUE, then this subset is selected.
          
5. If there are still multiple selected rows, the subset
   that have the highest precedence (the lowest numerical
   value for alaPimGroupMappingPrecedence) are selected.
          
6. If there are still multiple selected rows, the row
   selected is implementation dependent; the implementation
   might or might not apply the PIM hash function to select
   the row.
          
7. The group mode to use is given by the value of
   alaPimGroupMappingPimMode from the single selected row; the
   RP to use is given by the value of
   alaPimGroupMappingRPAddress, unless alaPimGroupMappingOrigin is
   'embedded', in which case the RP is extracted from the
   group address in question.
alaPimGroupMappingEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1
An entry (conceptual row) in the alaPimGroupMappingTable.
Column Syntax OID
The mechanism by which this group mapping was learned.
AlaPimGroupMappingOriginType
Type Values:
1fixed
2configRp
3configSsm
4bsr
5autoRP
6embedded
7other
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1.1
The address type of the IP multicast group prefix.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1.2
The IP multicast group address which, when combined with
alaPimGroupMappingGrpPrefixLength, gives the group prefix for
this mapping. The InetAddressType is given by the
alaPimGroupMappingAddressType object.
OctetString
Constraints:
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1.3
The multicast group prefix length, which, when combined
with alaPimGroupMappingGrpAddress, gives the group prefix for
this mapping. The InetAddressType is given by the
alaPimGroupMappingAddressType object. If
alaPimGr…
Unsigned32
Constraints:
range: 4-128
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1.4
The address type of the RP to be used for groups within
this group prefix, or unknown(0) if no RP is to be used or
if the RP address is unknown. This object must be
unknown(0) if alaPimGroupMappingPimMode is ssm(2) or …
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1.5
The IP address of the RP to be used for groups within this
group prefix. The InetAddressType is given by the
alaPimGroupMappingRPAddressType object.
OctetString
Constraints:
range: 0-0
range: 4-4
range: 8-8
range: 16-16
range: 20-20
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1.6
The PIM mode to be used for groups in this group prefix.
AlaPimMode
Type Values:
1none
2ssm
3asm
4bidir
5dm
6other
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1.7
The precedence of this row, used in the algorithm that
determines which row applies to a given group address
(described above). Numerically higher values for this
object indicate lower precedences, with the value zero
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.6.2.1.13.1.8