ALCATEL-IND1-NTP-MIB Table View

Table containing the synchronization host this
switch will be associated with.

alaNtpPeerEntry row .1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1

Each entry corresponds to a synchronization host.

Indexes

alaNtpPeerAddressType alaNtpPeerAddress

Column	Syntax	OID
alaNtpPeerAddressType The InetAddress type of the synchronization host. Only types InetAddressIPv4 (1) and InetAddressDNS (16) are supported.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.1
alaNtpPeerAddress The InetAddress of the synchronization host.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.2
alaNtpPeerIpAddress The IP address of the synchronization host derrived from the InetAddress.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.3
alaNtpPeerType Type of synchronization host that will communicate with this switch.	Enumerationr/w Enumerated Values: 1 active 2 passive 3 client 4 server 5 broadcast 8 bclient	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.4
alaNtpPeerAuth The authorization keyid for the remote host.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.5
alaNtpPeerVersion The NTP version to communicate with the remote host.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.6
alaNtpPeerMinpoll The minimum poll duration to the remote host. This value is a power of 2 seconds when the poll will occur. For example, 4 (2 to the power 4) is 16 seconds. The maximum poll value is 10.	Integer32r/w Constraints: range: 4-10	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.7
alaNtpPeerPrefer Marks the host as a preferred connection.	Enumerationr/w Enumerated Values: 1 prefer 2 noPrefer	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.8
alaNtpPeerAdmin Used in accordance to installation and removal conventions for conceptual rows. The RowStatus values that are supported are the following: active(1) - The row is active and valid. createAndGo(4) - The row will be c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.9
alaNtpPeerName The DNS name for the peer association derrived from the InetAddress.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.10
alaNtpPeerStratum The stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized. This parameter can only be set with a LOCALCLOCK server.	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.1.4.1.11

Used to display a brief list of all NTP associations
related to this switch (servers, peers, etc.).

alaNtpPeerListEntry row .1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1

Each entry corresponds to one association.

Indexes

alaNtpPeerListAddressType alaNtpPeerListAddress

Column	Syntax	OID
alaNtpPeerListAddressType The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.1
alaNtpPeerListAddress The InetAddress of the association.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.2
alaNtpPeerListIpAddress The IP address of the association.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.3
alaNtpPeerListLocal The local interface address assigned by NTP to the remote association. If this address is 0.0.0.0, then the local address has yet to be determined.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.4
alaNtpPeerListStratum The stratum level of the remote peer. If this number is 16, the remote peer has not been synchronized.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.5
alaNtpPeerListPoll The polling interval, in seconds.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.6
alaNtpPeerListReach The reachability register of the remote association, in octal format. This number is determined by the NTP algorithm.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.7
alaNtpPeerListDelay The currently estimated delay of this remote association, in seconds. This time is determined by the NTP algorithm.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.8
alaNtpPeerListOffset The currently estimated offset of this remote association, in seconds. This time is determined by the NTP algorithm.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.9
alaNtpPeerListDispersion The currently estimated dispersion of this remote association, in seconds. This time is determined by the NTP algorithm.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.10
alaNtpPeerListSynced Indicates that NTP is synchronized with this entity.	Enumeration Enumerated Values: 1 synchronized 2 notSynchronized	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.11
alaNtpPeerListName The DNS name for the peer association,	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.1.1.12

Used to display a brief list of all NTP associations
related to this switch (servers, peers, etc.).

alaNtpPeerShowEntry row .1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1

Each entry corresponds to one association.

Indexes

alaNtpPeerShowRemoteAddressType alaNtpPeerShowRemoteAddress

Column	Syntax	OID
alaNtpPeerShowRemoteAddressType The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.1
alaNtpPeerShowRemoteAddress The InetAddress of the remote association.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.2
alaNtpPeerShowRemoteIpAddress The IP address of the remote association.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.3
alaNtpPeerShowLocal The local interface address assigned by NTP to the remote associations.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.4
alaNtpPeerShowHmode The host mode of this remote association.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.5
alaNtpPeerShowPmode The peer mode of this remote association.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.6
alaNtpPeerShowStratum The stratum level of the remote peer.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.7
alaNtpPeerShowPrecision The advertised precision of this association, which is a number from -4 to -20.	Integer32 Constraints: range: -20--4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.8
alaNtpPeerShowLeapIndicator The status of leap second insertion for this association.	Enumeration Enumerated Values: 0 noLeapWarning 1 leapAddSecond 2 leapDeleteSecond 3 leapNotInSync	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.9
alaNtpPeerShowReferenceId This is a 32-bit code identifying the peers primary reference source. Normally an IP address.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.10
alaNtpPeerShowRootDistance This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.11
alaNtpPeerShowRootDispersion This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.12
alaNtpPeerShowPpoll The poll time for this association when it is a peer.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.13
alaNtpPeerShowHpoll The poll time for this association when it is a host.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.14
alaNtpPeerShowKeyid This is an integer identifying the cryptographic key used to generate the message authentication code.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.15
alaNtpPeerShowVersion What version of NTP this association is using.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.16
alaNtpPeerShowAssociation The number of seconds since this NTP entity was associated with the switch.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.17
alaNtpPeerShowValid This is an integer indicating the validity of current NTP system variables. The validity is made false if system variable are changed and a new peer sample under the changed configuration has not been received.	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.18
alaNtpPeerShowReach This is a shift register used to determine the reachability status of this peer.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.19
alaNtpPeerShowUnreach The number of times this NTP entity was unreachable.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.20
alaNtpPeerShowFlash This bitmap reveals the state at the last grumble from the peer and are most handy for diagnosing problems. Duplicate packet: 0x0001 Bogus packet: 0x0002 Pr…	Integer32 Constraints: range: 0-32767	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.21
alaNtpPeerShowBroadcastOffset The broadcast delay.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.22
alaNtpPeerShowTTL This field displays the Time-to-Live (TTL) time in seconds and the mode (unicast, multicast, or broadcast) of NTP messages sent to a broadcast address.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.23
alaNtpPeerShowTimer The time to next poll in seconds.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.24
alaNtpPeerShowFlags This details which flags have been configured for this peer. Association configured: 0x01 System peer: 0x02 Enabled for burst mode synchronization: 0x04 Reference clock: …	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.25
alaNtpPeerShowReferenceTime This is the local time, in timestamp format, when the peer clock was last updated.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.26
alaNtpPeerShowOriginateTime This is the local time, in timestamp format, of the peer when its latest NTP message was sent.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.27
alaNtpPeerShowReceiveTime This is the local time, in timestamp format, when the latest NTP message from the peer arrived.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.28
alaNtpPeerShowTransmitTime This is the local time, in timestamp format, at which the last NTP message was sent from this association.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.29
alaNtpPeerShowOffset The currently estimated offset of this remote association, in seconds.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.30
alaNtpPeerShowDelay The currently estimated delay of this remote association, in seconds.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.31
alaNtpPeerShowDispersion The currently estimated dispersion of this remote association, in seconds.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.32
alaNtpPeerShowName The DNS name for the peer association,	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.33
alaNtpPeerShowStatus Peer selection status: Bits 0 - 7 - Rejected due to high stratum and/or failed sanity checks: 1 - Designated falsticker by the intersection algorithm: 2 - Excess, culled from the e…	Bits Enumerated Values: 0 rejected 1 falsticker 2 excess 3 outlyer 4 candidate 5 exceedsMaxDistance 6 selected 7 selectedPPS 8 reachable 9 authenticated 10 authenticationRequired 11 configured	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.3.1.34

Used to display a brief list of all incoming NTP client associations
related to this switch.

alaNtpClientListEntry row .1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.4.1

Each entry corresponds to one association.

Indexes

alaNtpClientListAddressType alaNtpClientListAddress

Column	Syntax	OID
alaNtpClientListAddressType The InetAddress type of the incoming client association. InetAddressIPv4 (1) is the only type currently supported.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.4.1.1
alaNtpClientListAddress The InetAddress of the client.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.4.1.2
alaNtpClientListVersion The NTP version used by the remote host for communication.	Integer32 Constraints: range: 3-4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.4.1.3
alaNtpClientKey The authorization keyid for the remote host.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.2.4.1.4

Table containing the synchronization host statistics.

alaNtpStatsPeerEntry row .1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1

Each entry corresponds to a synchronization host.

Indexes

alaNtpStatsPeerAddressType alaNtpStatsPeerAddress

Column	Syntax	OID
alaNtpStatsPeerAddressType The InetAddress type of the synchronization host. InetAddressIPv4 (1) is the only type currently supported.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.1
alaNtpStatsPeerAddress The InetAddress of the synchronization host.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.2
alaNtpStatsPeerIpAddress The IP address of the synchronization host.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.3
alaNtpStatsPeerLocal The local interface address assigned by NTP to the remote association.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.4
alaNtpStatsPeerLastRcv The time since the last packet was received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.5
alaNtpStatsPeerNextSend The time until the next packet is to be sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.6
alaNtpStatsPeerReachChange The time that the peer has been reachable.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.7
alaNtpStatsPeerPacketsSent The number of packets that have been sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.8
alaNtpStatsPeerPacketsRcvd The number of packets that have been received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.9
alaNtpStatsPeerBadAuth The number of packets received with bad authentication.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.10
alaNtpStatsPeerBogusOrigin The number of bogus packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.11
alaNtpStatsPeerDuplicate The number of duplicated packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.12
alaNtpStatsPeerBadDispersion The number bad dispersions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.13
alaNtpStatsPeerBadRefTimedeprecated The number of bad reference times received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.14
alaNtpStatsPeerCandidateOrder The order of synchronization candidates.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.15
alaNtpStatsPeerReset The number of seconds since the statistics for this peer were last reset. Writing any value will reset the peer statistics.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.16
alaNtpStatsPeerName The DNS name for the peer association,	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.2.1.17

Table containing the association monitoring list.

alaNtpStatsMonitorEntry row .1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1

Each entry corresponds to a synchronization host.

Indexes

alaNtpStatsMonitorIndex

Column	Syntax	OID
alaNtpStatsMonitorIndex Table index.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.1
alaNtpStatsMonitorAddress The IP address of the remote association.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.2
alaNtpStatsMonitorPort The IP port number of the association.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.3
alaNtpStatsMonitorLocalAddress The local IP address of the association.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.4
alaNtpStatsMonitorCount The number of NTP packets received from this association.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.5
alaNtpStatsMonitorMode The mode the NTP association uses in relation to the switch.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.6
alaNtpStatsMonitorVersion The version of NTP the association is using.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.7
alaNtpStatsMonitorDrop The number of NTP packets received from this association that were dropped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.8
alaNtpStatsMonitorLast The number of seconds since the last NTP message has been received from this association.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.9
alaNtpStatsMonitorFirst The number of seconds since the first NTP message has been received from this association.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.10
alaNtpStatsMonitorName The DNS name for the peer association,	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.3.6.1.11

Table containing the trusted keys.

alaNtpAccessKeyIdEntry row .1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.1.1

Entry of a trusted key.

Indexes

alaNtpAccessKeyIdKeyId

Column	Syntax	OID
alaNtpAccessKeyIdKeyId Keyid of the key in the key file.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.1.1.1
alaNtpAccessKeyIdTrust The current state of trust of the table entry.	Enumerationr/w Enumerated Values: 1 trusted 2 untrusted	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.1.1.2

Table containing the restricted addresses.

alaNtpAccessRestrictedEntry row .1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.2.1

Entry of a restricted address.

Indexes

alaNtpAccessRestrictedIpAddress alaNtpAccessRestrictedMask

Column	Syntax	OID
alaNtpAccessRestrictedIpAddress IP address to restrict.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.2.1.1
alaNtpAccessRestrictedMask IP mask to restrict.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.2.1.2
alaNtpAccessRestrictedRestrictions A mask indicating the restrictions to apply to the entry. 0x0001 - ignore, Ignore all packets from hosts. Can't use this on default (0.0.0.0). 0x0002 - noserve, Ignore NTP packets other than information queries and …	Integer32r/w Constraints: range: 0-1023	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.2.1.3
alaNtpAccessRestrictedCount Number of packets matched.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.2.1.4
alaNtpAccessRestrictedRowStatus Used in accordance to installation and removal conventions for conceptual rows. The RowStatus values that are supported are the following: active(1) - The row is active and valid. createAndGo(4) - The row will be c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.26.1.1.7.2.1.5