ALCATEL-IND1-NETSEC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
52

alaNetSecPortRangeGroupTable

table
.1.3.6.1.4.1.6486.800.1.2.1.48.1.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaNetSecPortRangeGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-NETSEC-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-NETSEC-MIB::alaNetSecPortRangeGroupTable' 
Table for collecting port-range and monitoring-group associations.
A port belongs to at most one monitoring-group.
alaNetSecPortRangeGroupEntry row .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.1.1.1
Each entry is identified by a unique port-range.
Indexes
Column Syntax OID
alaNetSecPortRangeGroupStartIfId
Starting interface index of a port-range
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.1.1.1.1
alaNetSecPortRangeGroupEndIfId
Ending interface index of a port-range
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.1.1.1.2
alaNetSecPortRangeGroupName
Name of monitoring-group with which this port-range is associated.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.1.1.1.3
alaNetSecPortRangeGroupRowStatus
identifies state of this entry. CREATEANDGO will only work, if the name of alaNetSecPortRangeGroupName is part of the create request
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.1.1.1.4

alaNetSecMonitoringGroupTable

table
.1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaNetSecMonitoringGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-NETSEC-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-NETSEC-MIB::alaNetSecMonitoringGroupTable' 
Table for collecting monitoring-groups' anomaly configurations
alaNetSecMonitoringGroupEntry row .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1
Each entry identifies configuration of a monitoring-group's anomaly-type's parameter
Indexes
Column Syntax OID
alaNetSecMonitoringGroupName
name of the monitoring-group
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.1
alaNetSecMonitoringGroupAnomaly
monitoring-group's anomaly-type
AlaAnomalyType
Type Values:
0all
1arpaddressscan
2arpflood
3reserved
4arpfailure
5icmpaddressscan
6icmpflood
7icmpunreachable
8tcpportscan
9tcpaddressscan
10synflood
11synfailure
12synackscan
13finscan
14finackdiff
15rstcount
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.2
alaNetSecMonitoringGroupAnomalyState
State of detecting indexed anomaly.
AlaNetsecStatusr/w
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.3
alaNetSecMonitoringGroupAnomalyLog
State of logging upon detecting anomaly.
AlaNetsecStatusr/w
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.4
alaNetSecMonitoringGroupAnomalyTrap
State of sending traps upon detecting anomaly.
AlaNetsecStatusr/w
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.5
alaNetSecMonitoringGroupAnomalyQuarantine
State of Quarantining anomalous port upon detecting anomaly.
AlaNetsecStatusr/w
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.6
alaNetSecMonitoringGroupAnomalyCount
Count of packets that must be seen during monitoring period
to initiate anomaly detection check.
Default value varies as below with anomaly:
Anomaly Count
------- -----
ARP addr…
Integer32r/w
Constraints:
range: 1-100000
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.7
alaNetSecMonitoringGroupAnomalySensitivity
Sensitivity of Anomaly Check to deviation from expected behavior.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.8
alaNetSecMonitoringGroupAnomalyPeriod
Time in seconds to monitor packets before checking for anomaly.
Integer32r/w
Constraints:
range: 5-3600
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.9
alaNetSecMonitoringGroupRowStatus
CREATEANDGO will only work if, besides RowStatus, at least one of State, Log, Trap, Quarantine, Count, Sensitivity or Period is part of the request.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.2.1.1.10

alaNetSecPortStatsTable

table
.1.3.6.1.4.1.6486.800.1.2.1.48.1.1.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaNetSecPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-NETSEC-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-NETSEC-MIB::alaNetSecPortStatsTable' 
Table for reporting port specific statistics
alaNetSecPortStatsEntry row .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.3.1.1
Stats are collected on a <port,packet-type,packet-direction,total/last> basis
Indexes
Column Syntax OID
alaNetSecPortStatsIfId
Interface Index of the port
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.3.1.1.1
alaNetSecPortStatsPacket
Packet type
AlaPacketType
Type Values:
1arpreply
2arprequest
3icmpechoreply
4icmpechorequest
5icmpdnr
6tcpsynonly
7tcpsynack
8tcpsynnack
9tcpfinack
10tcpfinnack
11tcprst
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.3.1.1.2
alaNetSecPortStatsLastIngress
Count of Indexed Ingress packets observed during last 5 seconds
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.3.1.1.3
alaNetSecPortStatsLastEgress
Count of Indexed Egress packets observed during last 5 seconds
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.3.1.1.4
alaNetSecPortStatsTotalIngress
Count of Indexed Ingress packets observed since monitoring was enabled, Counter will loop back from zero upon reaching the maximum
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.3.1.1.5
alaNetSecPortStatsTotalEgress
Count of Indexed Egress packets observed since monitoring was enabled. Counter will loop back from zero upon reaching the maximum
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.3.1.1.6

alaNetSecPortAnomalyStatsTable

table
.1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1 · 1 row entry · 7 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaNetSecPortAnomalyStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-NETSEC-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-NETSEC-MIB::alaNetSecPortAnomalyStatsTable' 
Table for reporting Anomaly statistics
alaNetSecPortAnomalyStatsEntry row .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1.1
Stats are collected on a <port,anomaly-type,packet-type,packet-direction,current/last> basis
Indexes
Column Syntax OID
alaNetSecPortAnomalyStatsIfId
Interface Index of the port
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1.1.1
alaNetSecPortAnomalyStatsAnomaly
Anomaly type
AlaAnomalyType
Type Values:
0all
1arpaddressscan
2arpflood
3reserved
4arpfailure
5icmpaddressscan
6icmpflood
7icmpunreachable
8tcpportscan
9tcpaddressscan
10synflood
11synfailure
12synackscan
13finscan
14finackdiff
15rstcount
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1.1.2
alaNetSecPortAnomalyStatsPacket
Packet type
AlaPacketType
Type Values:
1arpreply
2arprequest
3icmpechoreply
4icmpechorequest
5icmpdnr
6tcpsynonly
7tcpsynack
8tcpsynnack
9tcpfinack
10tcpfinnack
11tcprst
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1.1.3
alaNetSecPortAnomalyStatsCurrentIngress
Count of Indexed packets ingress during current monitoring period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1.1.4
alaNetSecPortAnomalyStatsCurrentEgress
Count of Indexed packets egress during current monitoring period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1.1.5
alaNetSecPortAnomalyStatsLastIngress
Count of Indexed packets ingress during last monitoring period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1.1.6
alaNetSecPortAnomalyStatsLastEgress
Count of Indexed packets egress during last monitoring period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.4.1.1.7

alaNetSecPortAnomalySummaryTable

table
.1.3.6.1.4.1.6486.800.1.2.1.48.1.1.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaNetSecPortAnomalySummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-NETSEC-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-NETSEC-MIB::alaNetSecPortAnomalySummaryTable' 
Table for reporting Anomaly summaries
alaNetSecPortAnomalySummaryEntry row .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.5.1.1
Summary are reported on a <port,summary-type,anomaly-type> basis
Indexes
Column Syntax OID
alaNetSecPortAnomalySummaryIfId
Interface Index of port
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.5.1.1.1
alaNetSecPortAnomalySummaryAnomaly
Anomaly type
AlaAnomalyType
Type Values:
0all
1arpaddressscan
2arpflood
3reserved
4arpfailure
5icmpaddressscan
6icmpflood
7icmpunreachable
8tcpportscan
9tcpaddressscan
10synflood
11synfailure
12synackscan
13finscan
14finackdiff
15rstcount
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.5.1.1.2
alaNetSecPortAnomalySummaryObserved
Count of observations for indexed anomaly on indexed port since monitoring was enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.5.1.1.3
alaNetSecPortAnomalySummaryDetected
Count of detections for indexed anomaly on indexed port since monitoring was enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.5.1.1.4

alaNetSecPortOpTable

table
.1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaNetSecPortOpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-NETSEC-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-NETSEC-MIB::alaNetSecPortOpTable' 
Table for reporting port anomaly operation parameters
alaNetSecPortOpEntry row .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1
Each entry is identified by a unique port, and anomaly-type combination
Indexes
Column Syntax OID
alaNetSecPortOpIfId
interface index of port
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.1
alaNetSecPortOpAnomaly
anomaly-type
AlaAnomalyType
Type Values:
0all
1arpaddressscan
2arpflood
3reserved
4arpfailure
5icmpaddressscan
6icmpflood
7icmpunreachable
8tcpportscan
9tcpaddressscan
10synflood
11synfailure
12synackscan
13finscan
14finackdiff
15rstcount
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.2
alaNetSecPortOpState
state of anomaly
AlaNetsecStatus
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.3
alaNetSecPortOpLog
Logging state of anomaly
AlaNetsecStatus
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.4
alaNetSecPortOpTrap
Trap state of anomaly
AlaNetsecStatus
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.5
alaNetSecPortOpQuarantine
Quarantine state of anomaly
AlaNetsecStatus
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.6
alaNetSecPortOpCount
activation-count being used by netsec on the indexed object
Integer32
Constraints:
range: 1-100000
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.7
alaNetSecPortOpSensitivity
sensitivity being used by netsec on the indexed object
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.8
alaNetSecPortOpPeriod
monitoring period being used by netsec on the indexed object
Integer32
Constraints:
range: 5-3600
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.6.1.1.9

alaNetSecGroupOpTable

table
.1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaNetSecGroupOpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-NETSEC-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-NETSEC-MIB::alaNetSecGroupOpTable' 
Table for reporting group anomaly operation parameters
alaNetSecGroupOpEntry row .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1
Each entry is identified by a unique group, and anomaly-type combination
Indexes
Column Syntax OID
alaNetSecGroupOpName
name of the group
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.1
alaNetSecGroupOpAnomaly
anomaly-type
AlaAnomalyType
Type Values:
0all
1arpaddressscan
2arpflood
3reserved
4arpfailure
5icmpaddressscan
6icmpflood
7icmpunreachable
8tcpportscan
9tcpaddressscan
10synflood
11synfailure
12synackscan
13finscan
14finackdiff
15rstcount
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.2
alaNetSecGroupOpState
state of anomaly
AlaNetsecStatus
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.3
alaNetSecGroupOpLog
Logging state of anomaly
AlaNetsecStatus
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.4
alaNetSecGroupOpTrap
Trap state of anomaly
AlaNetsecStatus
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.5
alaNetSecGroupOpQuarantine
Quarantine state of anomaly
AlaNetsecStatus
Type Values:
0default
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.6
alaNetSecGroupOpCount
activation-count being used by netsec on the indexed object
Integer32
Constraints:
range: 1-100000
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.7
alaNetSecGroupOpSensitivity
sensitivity being used by netsec on the indexed object
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.8
alaNetSecGroupOpPeriod
monitoring period being used by netsec on the indexed object
Integer32
Constraints:
range: 5-3600
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.7.1.1.9

alaNetSecGroupTable

table
.1.3.6.1.4.1.6486.800.1.2.1.48.1.1.8.1 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaNetSecGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-NETSEC-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-NETSEC-MIB::alaNetSecGroupTable' 
Table of groups configured
alaNetSecGroupEntry row .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.8.1.1
Each entry identifies a configured group
Indexes
Column Syntax OID
alaNetSecGroupName
Name of configured group
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.8.1.1.1
alaNetSecGroupMemberPorts
Yes if there are ports in this group.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.8.1.1.2
alaNetSecGroupAnomalyCfg
Yes if any of this group's anomaly has a non-default configuration.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.800.1.2.1.48.1.1.8.1.1.3