ALCATEL-IND1-MAC-ADDRESS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
21
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.1 · 1 row entry · 5 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk slMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-MAC-ADDRESS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-MAC-ADDRESS-MIB::slMacAddressTable'
A table contains source addresses which can be configured as
permanent (not aged out), delete on reset, delete on timeout
	in the MAC address table, and those dynamic learned addresses
	which can be viewed and deleted.
slMacAddressEntry row .1.3.6.1.4.1.6486.800.1.2.1.8.1.1.1.1
Defninition of the Mac Addresses entries for which the switch
has information.

For creation of a Mac Address, the following 6 fields in
slMacAddressEntry are required:
ifIndex
dot1qVlanIndex
slMacAddress…
Column Syntax OID
The MAC address for this entry.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.1.1.1
This object indicates the management of this entry.
permanent(1) - this entry is currently in use
and will remain so after the user removing
this entry.
deleteOnReset(2) - this entry is currently in
use and …
Enumerationr/w
Enumerated Values:
1permanent
2deleteOnReset
3deleteOnTimeout
4learned
5staticMulticast
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.1.1.2
This object indicates the disposition of the entry.
bridging(1) - this entry is currently in use
for bridging.
filtering(2) - this entry is currently in use
for filtering.
quarantined(3) - this entry is currentl…
Enumerationr/w
Enumerated Values:
1bridging
2filtering
3quarantined
4hostIntegrity
5userNetworkProf
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.1.1.3
Row Status for creating/deleting the mac address.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.1.1.4
This object indicates the protocol associated with
a mac address.
MacAddressProtocolType
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.1.1.5
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.2 · 1 row entry · 2 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk slMacAddressAgingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-MAC-ADDRESS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-MAC-ADDRESS-MIB::slMacAddressAgingTable'
Definition of the timeout for those learned mac addresses and
configured as deleted_on_timeout addresses.
slMacAddressAgingEntry row .1.3.6.1.4.1.6486.800.1.2.1.8.1.1.2.1
Information about the aging time for some specific vlan.

For creation of the aging time, If the vlan Id is specified, then
the aging time value will be applied to those mac addresses in
that vlan. Otherwise…
Column Syntax OID
This object indicates the value of mac address aging time.
Integer32r/w
Constraints:
range: 10-1000000
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.2.1.1
Row Status for creating/deleting the aging time.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.2.1.2
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.4 · 1 row entry · 3 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk slMacToPortMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-MAC-ADDRESS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-MAC-ADDRESS-MIB::slMacToPortMacTable'
A list of Mac To Port Binding Mac address.
slMacToPortMacEntry row .1.3.6.1.4.1.6486.800.1.2.1.8.1.1.4.1
Mac To Port Binding Mac address entry.
Column Syntax OID
The vlan Id in which the packet with this mac address is flooded
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.4.1.1
A Mac address that is associated with the Mac To Port Binding.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.4.1.2
This indicate whether to add or delete the mac address
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.4.1.3
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.7 · 1 row entry · 1 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk slMacLearningControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-MAC-ADDRESS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-MAC-ADDRESS-MIB::slMacLearningControlTable'
This table provides the control information about the mac learning on ports
slMacLearningControlEntry row .1.3.6.1.4.1.6486.800.1.2.1.8.1.1.7.1
This table provides the control information about the mac learning on ports
Indexes
Column Syntax OID
Status of mac learning on port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.7.1.1
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8 · 1 row entry · 10 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaSlMacAddressGlobalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-MAC-ADDRESS-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-MAC-ADDRESS-MIB::alaSlMacAddressGlobalTable'
This table contains MAC addresses from both Vlan and VPLS domain.
This table contains source addresses which can be configured as
permanent (not aged out), delete on reset, delete on timeout
    in the MAC address table, and those dynamic learned addresses
    which can be viewed and deleted.
alaSlMacAddressGlobalEntry row .1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1
Defninition of the Mac Addresses entries for which the switch
has information.
For creation of a Mac Address in VLAN domain, the following fields in
slMacAddressGlobalEntry are required:
slMacDomain
slOriginId - If…
Column Syntax OID
This object indicates whether this MAC is learned on Vlan domain or vpls domain
Enumeration
Enumerated Values:
0all
1vlan
2vpls
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.1
This field is used only for VPLS, It defaults to default for vlan domain MACs
Enumeration
Enumerated Values:
0default
1sap
2sBind
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.2
This should be ifIndex for Vlan domain MAC;
ifIndex for SAP of VPLS domain MAC;
SDP_ID for sBind of VPLS domain MAC
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.3
Depending on the domain type, Vlan based or VPLS based.
If Vlan based learning, then this field holds the Vlan ID.
If VPLS based learning, then this field holds the VPLS Service ID
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.4
This object is only meaningful in VPLS domain.
If SAP, this is the encapsulation ID;
If sBind, this is the vcID,
This value will be default to -0- in VLAN domain
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.5
The MAC address for this entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.6
This object indicates the management of this entry.
permanent(1) - this entry is currently in use
and will remain so after the user removing
this entry.
deleteOnReset(2) - this entry is currently in
use and …
Enumerationr/w
Enumerated Values:
1permanent
2deleteOnReset
3deleteOnTimeout
4learned
5staticMulticast
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.7
This object indicates the disposition of the entry.
bridging(1) - this entry is currently in use for bridging.
filtering(2) - this entry is currently in use for filtering.
quarantined(3) - this entry is currently in use…
Enumerationr/w
Enumerated Values:
1bridging
2filtering
3quarantined
4hostIntegrity
5userNetworkProf
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.8
Row Status for creating/deleting the mac address.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.9
This object indicates the protocol associated with
a mac address.
MacAddressProtocolTyper/w
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6486.800.1.2.1.8.1.1.8.1.10