ALCATEL-IND1-IPM-VLAN-MIB Table View

A table that contains port specific information for the IP 
Multicast VLAN. An entry is this table is created when a port 
is configured as a receiver / sender port for a IPMVLAN.

alaipmvVlanPortEntry row .1.3.6.1.4.1.6486.800.1.2.1.41.1.1.1.1.1

A IPMV Port entry.

Indexes

alaipmvVlanPortIPMVlanNumber alaipmvVlanPortNumber alaipmvVlanPortType

Column	Syntax	OID
alaipmvVlanPortIPMVlanNumber The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.1.1.1.1
alaipmvVlanPortNumber The port ifindex of the port which is associated to the IPMVLAN.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.1.1.1.2
alaipmvVlanPortType The type of this port associated to the IPMVLAN. receiverPort(1) is the receiver port associated to the IPMVLAN, senderPort(2) is the sender port associated to the IPMVLAN. In the VLAN Stacking environment, these ports …	Enumeration Enumerated Values: 1 receiverPort 2 senderPort	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.1.1.1.3
alaipmvVlanPortRowStatus The status of this table entry. The values supported are CreateAndGo(4) and destroy(6), to create or delete the port as a receiver / sender port in an IPMVLAN. Of course the corresponding vlan and port must exist.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.1.1.1.4

A list of IP addresses assigned to an IPMVLAN.

alaipmvVlanIpAddrEntry row .1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.1.1

A IPMVLAN IP address entry.

Indexes

alaipmvVlanIpAddrVlanNumber alaipmvVlanIpAddrType alaipmvVlanIpAddress

Column	Syntax	OID
alaipmvVlanIpAddrVlanNumber The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.1.1.1
alaipmvVlanIpAddrType The IP address type.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.1.1.2
alaipmvVlanIpAddress The Multicast IP address based on the address type. This IP multicast group address can be associated to multiple IPMVLANs. Configuration of IPv4/IPv6 Multicast Group address on multiple IPMVlans, that are associated w…	INET-ADDRESS-MIBInetAddress Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.1.1.3
alaipmvVlanIpAddrRowStatus This is used to create or delete the Multicast IP address in an IPMVLAN. Of course the corresponding vlan must exist.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.1.1.4

A list of IP addresses assigned to an IPMVLAN.

alaipmvVlanIpAddrMaskEntry row .1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.2.1

A IPMVLAN IP address entry.

Indexes

alaipmvVlanIpAddrMaskVlanNumber alaipmvVlanIpAddrMaskType alaipmvVlanIpAddrMaskAddress alaipmvVlanIpAddrMaskPrefixLen

Column	Syntax	OID
alaipmvVlanIpAddrMaskVlanNumber The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.2.1.1
alaipmvVlanIpAddrMaskType The IP address type.The allowed values are ipv4(1) and ipv6(2).	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.2.1.2
alaipmvVlanIpAddrMaskAddress The Multicast IP address based on the address type indicated by alaipmvVlanIpAddrMaskType. This IP multicast group address can be associated to multiple IPMVLANs. alaipmvVlanIpAddrMaskPrefixLen is used to specify a mask…	INET-ADDRESS-MIBInetAddress Constraints: range: 4-4 range: 16-16	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.2.1.3
alaipmvVlanIpAddrMaskPrefixLen The Multicast IP address-mask length based on the address type. It must be 0-32 for alaipmvVlanIpAddrMaskType ipv4 and 128 for alaipmvVlanIpAddrMaskType ipv6. The host bits of the address alaipmvVlanIpAddrMaskAddress sh…	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.2.1.4
alaipmvVlanIpAddrMaskRowStatus This is used to create or delete the Multicast IP address in an IPMVLAN. Of course the corresponding vlan must exist.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.2.2.1.5

A table that contains ipmvlan-ctag association for the IPMV feature.

alaipmvVlanCtagEntry row .1.3.6.1.4.1.6486.800.1.2.1.41.1.1.3.1.1

A IPMVLAN-Ctag entry.

Indexes

alaipmvVlanNumber alaipmvVlanCtag

Column	Syntax	OID
alaipmvVlanNumber The VLAN number component of this IPMVLAN instance. Valid range from 2 to 4094.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.3.1.1.1
alaipmvVlanCtag The customer vlan id associated to the IPMVLAN. This customer vlan id is unique and can't be associated to more than one IPM Vlan	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.3.1.1.2
alaipmvVlanCtagRowStatus The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove an IPMVLAN-ctag association.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.3.1.1.3

A table contains asssociation between receiver vlan and receiver port for the IP Multicast VLAN.
An entry is this table is created when any receiver port is associated with a receiver vlan for an IPMVLAN.

alaipmvReceiverVlanPortEntry row .1.3.6.1.4.1.6486.800.1.2.1.41.1.1.5.1.1

A Receiver Vlan & Receiver Port association entry.

Indexes

alaipmvReceiverVlanPortNumber alaipmvReceiverVlanPortIPMVlanNumber alaipmvReceiverVlanPortRcvrVlanNumber

Column	Syntax	OID
alaipmvReceiverVlanPortNumber The port ifindex of the receiver port which is associated to the receiver vlan for an IPMVLAN.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.5.1.1.1
alaipmvReceiverVlanPortIPMVlanNumber The VLAN number component of this receiver vlan(RVLAN) & receiver port association instance. Valid range from 2 to 4 094.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.5.1.1.2
alaipmvReceiverVlanPortRcvrVlanNumber The VLAN number component of this receiver vlan(RVLAN) & receiver port association instance. Valid range from 2 to 4 094.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.5.1.1.3
alaipmvReceiverVlanPortRowStatus The status of this table entry. The values supported are CreateAndGo(4) and destroy(6). To create or delete the RVLAN & receiver port association in an IPMVLAN. In enterprise mode, the RVLAN must exist as a normal vlan …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.41.1.1.5.1.1.4