ALCATEL-IND1-E-SERVICE-MIB Table View

A table that contains service profiles containing performance and control attributes. 
An entry in this table is created when a new service profile is defined.

alaEServiceSapProfileEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1

A E-Service Service Profile entry.

Indexes

alaEServiceSapProfileID

Column	Syntax	OID
alaEServiceSapProfileID A label given to uniquely identify this profile. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.1
alaEServiceSapProfileCVLANTreatment The type of VLAN stacking operation to be performed on a customer frame entering this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the frame before any existing 802.1Q tag. Translate (2) …	Enumerationr/w Enumerated Values: 1 stackSVLAN 2 translate 3 changeCVLAN	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.2
alaEServiceSapProfileReplacementCVLAN The CVLAN ID to use when using the Change CVLAN treatment mode.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.3
alaEServiceSapProfilePriorityMapMode This object describes the source of the value for the priority field of the SVLAN 802.1Q tag when pre-pended to the customer data frame. If set to notAssigned(0), SAP priority limit parameter will not be effective, QoS…	Enumerationr/w Enumerated Values: 0 notAssigned 1 mapInnerPtoOuterP 2 mapInnerDscpToOuterP 3 fixedP	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.4
alaEServiceSapProfileFixedPriority This object describes the value of the priority field of the 802.1Q SVLAN tag pre-pended to customer data frames when the fixed priority mapping mode is selected.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.5
alaEServiceSapProfileIngressBW This object describes this limit of ingress bandwidth for the traffic to which this profile is applied. If 0, no bandwidth limit is applied. This number represents traffic in units of 1,000,000 bits per second. Note …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.6
alaEServiceSapProfileBandwidthShare This object describes the use of the bandwidth limit in how it is applied across multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set to Shared (1), all the ports that are part of the SA…	Enumerationr/w Enumerated Values: 0 notApplicable 1 shared 2 notShared 3 notAssigned	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.7
alaEServiceSapProfileRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.8
alaEServiceSapProfileEgressBW This object describes this limit of egress bandwidth for each UNI of the SAP to which this profile is applied. If 0, no bandwidth limit is applied. This number represents traffic in units of Megabits per second. Note t…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.9
alaEServiceSapProfileCIR Committed Information Rate - bandwidth values in bits per second.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.10
alaEServiceSapProfileCBS Committed Burst Size - bucket size in byte.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.11
alaEServiceSapProfilePIR Peak Information Rate - bandwidth values in bits per second.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.12
alaEServiceSapProfilePBS Peak Burst Size - bucket size in byte.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.13
alaEServiceSapProfileDepth This object describes the depth limit.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.14

A table that contains service profiles containing performance and control attributes. 
An entry in this table is created when a new service profile is defined.

alaEServiceUNIProfileEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1

A E-Service Service Profile entry.

Indexes

alaEServiceUNIProfileID

Column	Syntax	OID
alaEServiceUNIProfileID A label given to uniquely identify this profile. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.1
alaEServiceUNIProfileStpBpduTreatment This object describes the behavior of the bridge in regards to the spanning tree protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.2
alaEServiceUNIProfile8021xTreatment This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the …	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.3
alaEServiceUNIProfile8021ABTreatment This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.4
alaEServiceUNIProfile8023adTreatment This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.5
alaEServiceUNIProfileGvrpTreatment This object describes the behavior of the bridge in regards to the GVRP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protoco…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.6
alaEServiceUNIProfileAmapTreatment This object describes the behavior of the bridge in regards to the Alcatel propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the …	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.7
alaEServiceUNIProfileRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.8
alaEServiceUNIProfileMvrpTreatment This object describes the behavior of the bridge in regards to the MVRP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol …	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.9
alaEServiceUNIProfileTunnelMac This object specifies the tunnel mac used to tunnel L2 protocol to NNI ports	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.10
alaEServiceUNIProfileLacpMarkerTreatment This object describes the behavior of the bridge in regards to the LACP MARKER PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the pr…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.11
alaEServiceUNIProfileOamTreatment This object describes the behavior of the bridge in regards to the OAM PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol t…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.12
alaEServiceUNIProfileCiscoPagpTreatment This object describes the behavior of the bridge in regards to the PAGP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol …	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.13
alaEServiceUNIProfileCiscoUdldTreatment This object describes the behavior of the bridge in regards to the UDLD PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol …	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.14
alaEServiceUNIProfileCiscoCdpTreatment This object describes the behavior of the bridge in regards to the CDC PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol t…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.15
alaEServiceUNIProfileCiscoVtpTreatment This object describes the behavior of the bridge in regards to the VTP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol t…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.16
alaEServiceUNIProfileCiscoDtpTreatment This object describes the behavior of the bridge in regards to the DTP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol t…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.17
alaEServiceUNIProfileCiscoPvstTreatment This object describes the behavior of the bridge in regards to the PVST PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol …	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.18
alaEServiceUNIProfileCiscoVlanTreatment This object describes the behavior of the bridge in regards to the VLAN PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol …	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.19
alaEServiceUNIProfileCiscoUplinkTreatment This object describes the behavior of the bridge in regards to the UPLINK PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protoco…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.20
alaEServiceUNIProfileIeeeMacTreatment This object describes the IEEEE Mac treatment unknown (0) the type is not defined. ieee-fwd-all(1) - Forwards all IEEE MAC's ieee-drop-all(2) - Discards all IEEE MAC's.	Enumerationr/w Enumerated Values: 0 unknown 1 ieeeFwdAll 2 ieeeDropAll	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.21

A table that contains the services and their assigned SVLAN for the
E-Service feature.

alaEServiceEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1

The svlan/ipmvlan-port association.

Indexes

alaEServiceID

Column	Syntax	OID
alaEServiceID A label given to uniquely identify this Service. Must be at least one character long.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.1
alaEServiceSVLAN The SVLAN number of the SVLAN chosen to the be transport for this service.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.2
alaEServiceVlanType The type of the vlan this service is going to attach to. When creating the service, the type should match the vlanId specified in the request.	Enumerationr/w Enumerated Values: 0 unknown 1 svlan 2 ipmvlan	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.3
alaEServiceRowStatus The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a service. When creating or deleting the service, the user needs to provide both the svlan and the vlant…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.4
alaEServiceStatGreenCount Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM and trTCM, packet is CIR/CBS compliant).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.5
alaEServiceStatYellowCount Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM and trTCM, packet is PIR/PBS compliant).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.6
alaEServiceStatRedCount Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.7
alaEServiceStatTotalCount Counter for the total number of packets/bytes (sum of Green, Yellow and Red counters).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.8

A table that contains the Service Access Points (Sap) listed by ID. 
This table is used to create, delete, and modify the SAP's profile

alaEServiceSapEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1

The list of SAP.

Indexes

alaEServiceSapID

Column	Syntax	OID
alaEServiceSapID A Number given to uniquely identify the SAP.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.1
alaEServiceSapServiceID A label given to uniquely identify the Service this SAP is for. Must be at least one character long.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.2
alaEServiceSapProfile The string identifying the SAP Profile this sap is to use. If specified, must match an existing SAP Profile.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.3
alaEServiceSapRowStatus The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a sap. When creating the sap, the user needs to provide the service name in the same set request.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.4

A table that contains the Service Access Points (Sap) where the CVLANs are bound 
to their service.

alaEServiceSapCvlanEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1

The CVLAN to Sap binding.

Indexes

alaEServiceSapCvlanSapID alaEServiceSapCvlanCvlan

Column	Syntax	OID
alaEServiceSapCvlanSapID A Number given to uniquely identify this SAP.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.1
alaEServiceSapCvlanCvlan This object is the CVLAN ID that this binding is targeted at. The CVLAN ID may be 0, which indicates an all or untagged only mapping type.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.2
alaEServiceSapCvlanMapType This object is the mapping type that defines what CVLANs are mapped into this service. Multiple mappings can be defined for CVLAN to service, however only one all (2) or untaggedOnly (3) mapping entry can be created pe…	Enumerationr/w Enumerated Values: 1 single 2 all 3 untaggedOnly	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.3
alaEServiceSapCvlanRowStatus The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a SAP.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.4

A table that contains the ports used by the EService feature.  Both UNI and NNI
are listed here.

alaEServicePortEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1

The list of ports being used by EService.

Indexes

alaEServicePortID

Column	Syntax	OID
alaEServicePortID The IfIndex of this UNI or NNI Port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.1
alaEServicePortType The type of port for Vlan Stacking operation. uni (1) represents a customer facing port on which traffic may enter the E-Service. nni (2) respresents a provider network port over which the E-Service may be connected.	Enumerationr/w Enumerated Values: 1 uni 3 nni	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.2
alaEServicePortVendorTpid he TPID for this port if type is NNI. It is used for the incoming data traffic parsing and it is substituted to the 802.1Q standard Tpid for the outgoing data traffic. This is used for compatibility with other vendor …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.3
alaEServicePortLegacyStpBpdu The legacy STP BPDU treatment for this port if NNI. It defines the type of processing applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer BPDUs with MAC address 01:80:c2:00:00:00 an…	Enumerationr/w Enumerated Values: 0 notApplicable 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.4
alaEServicePortLegacyGvrpPdu The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing applied to GVRP PDUs on network ports.	Enumerationr/w Enumerated Values: 0 notApplicable 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.5
alaEServicePortUniProfile The label of an existing UNI profile that which contains various properties to be applied to this port if UNI.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.6
alaEServicePortTransBridging The Transparent Bridging status for the nni Port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.7
alaEServicePortLegacyMvrpPdu The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing applied to MVRP PDUs on network ports.	Enumerationr/w Enumerated Values: 0 notApplicable 1 enable 2 disable	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.8

A table that contains the UNI that are bound to each SAP for classifying 
traffic into each EService. Not that writing to this table may create
a new UNI.

alaEServiceSapUniEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1

The list of SAP-UNI bindings being used by EService.

Indexes

alaEServiceSapUniSap alaEServiceSapUniUni alaEServiceSapUniCvlan

Column	Syntax	OID
alaEServiceSapUniSap The SAP ID that is configured onto this port.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.1
alaEServiceSapUniUni The IfIndex of this UNI Port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.2
alaEServiceSapUniRowStatus The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.3
alaEServiceSapUniCvlan Cvlan to be inserted for untagged frames incoming in this UNI Port if Cvlan insertion feature enabled else 0	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.4

A table that contains the SVLANs bound to each NNI for use by the 
EService feature.

alaEServiceNniSvlanEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1

The list of NNI-SVLAN bindings being used by EService.

Indexes

alaEServiceNniSvlanNni alaEServiceNniSvlanSvlan

Column	Syntax	OID
alaEServiceNniSvlanNni The IfIndex of this NNI Port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.1
alaEServiceNniSvlanSvlan The SVLAN bound to this port. SVLAN cannot be 1.	Integer32 Constraints: range: 2-4094	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.2
alaEServiceNniSvlanRowStatus The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.3
alaEServiceNniSvlanVpaType The object is used to specify whether the VPA state is to be controlled by an ERP or a STP. By default VPA state is controlled by STP.	Enumerationr/w Enumerated Values: 1 stp 2 erp	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.4

A statistics table that contains the counters per SAP.

alaEServiceSapCvlanPortStatEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1

A E-Service Statistics Entry.

Indexes

alaEServiceSapCvlanPortStatSapID alaEServiceSapCvlanPortStatCvlanID alaEServiceSapCvlanPortStatPortID

Column	Syntax	OID
alaEServiceSapCvlanPortStatSapID A Number given to uniquely identify the SAP.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.1
alaEServiceSapCvlanPortStatCvlanID This object is the CVLAN ID that this binding is targeted at. The CVLAN ID may be 0, which indicates an all or untagged only mapping type.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.2
alaEServiceSapCvlanPortStatPortID The IfIndex of this UNI Port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.3
alaEServiceSapCvlanPortStatGreenCount Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM and trTCM, packet is CIR/CBS compliant) per UNI port, per CVLAN. This object is applicable only when ingress bandwidth is not shared…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.4
alaEServiceSapCvlanPortStatYellowCount Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM and trTCM, packet is PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable only when ingress bandwidth is not share…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.5
alaEServiceSapCvlanPortStatRedCount Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable only when ingress bandw…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.6
alaEServiceSapCvlanPortStatTotalCount Counter for the total number of packets/bytes (sum of Green, Yellow and Red counters) per UNI port, per CVLAN. This object is applicable only when ingress bandwidth is not shared across SAP ports and CVLANs.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.7

A table that contains l2 custom protocol entries with name and action associated
to a uni profile. An entry in this table is created when an l2 custom protocol
entry is associated to uni profile.

alaEServiceUNIProfileL2CustomProtocolEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1

An E-Service Service Profile entry associated with l2 custom protocol entry.

Indexes

alaEServiceL2CustomProtocolUNIProfileID alaEServiceUNIProfileL2CustomProtocolID

Column	Syntax	OID
alaEServiceL2CustomProtocolUNIProfileID A label given to uniquely identify this profile. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1.1
alaEServiceUNIProfileL2CustomProtocolID Name of the L2 Custom protocol entry associated to UNI profile. Must be at least one character long.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1.2
alaEServiceUNIProfileL2CustomProtocolTreatment This object describes the behavior of the bridge in regards to the destination Mac address matching with the L2 Custom protocol entry mac address on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider…	AlaEServiceUNIProfileProtocolTreatmentr/w Type Values: 1 tunnel 2 drop 3 peer 4 macTunnel	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1.3
alaEServiceUNIProfileL2CustomProtocolRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1.4

A table that contains l2 custom protocol entries with name, Mac address, mask,
ether type and ether sub type.

alaEServiceL2CustomProtocolEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1

An E-Service Service with l2 custom protocol entry.

Indexes

alaEServiceL2CustomProtocolID

Column	Syntax	OID
alaEServiceL2CustomProtocolID Name of the L2 Custom protocol entry which is an identifier to this table. Must be at least one character long.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.1
alaEServiceL2CustomProtocolEntryType This object specifies the custom L2 protocol entry type	AlaEServiceL2CustomProtocolTyper/w Type Values: 1 maskType 2 macType 3 ssapdsapType 4 etherType 5 ethersubType	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.2
alaEServiceL2CustomProtocolMac This object specifies the destination mac address that needs L2 protocol handling	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.3
alaEServiceL2CustomProtocolMask This object specifies the range of destination mac address that that needs L2 protocol handling	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.4
alaEServiceL2CustomProtocolEtherType Ether type value for generic ethertype.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.5
alaEServiceL2CustomProtocolEtherSubType if Ether type >1536 then the sub type is allowed to be configured	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.6
alaEServiceL2CustomProtocolSsap SSAP value for generic SSAP and SNAP rules, when Ether type < 1536	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.7
alaEServiceL2CustomProtocolDsap DSAP value for generic DSAP and SNAP rules, when Ether type < 1536	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.8
alaEServiceL2CustomProtocolPid protocol identifier in case of LLC SNAP packet	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.9
alaEServiceL2CustomProtocolRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.10

A table, that contains UNI port L2 protocol frame statistics.

alaEServiceUNIPortL2ProtocolStatisticsEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1

An E-Service Service UNI port L2 protocol statistics entry associated with an L2 protocol and a port entry.

Indexes

alaEServiceUNIPortID alaEServiceUNIPortL2ProtocolID

Column	Syntax	OID
alaEServiceUNIPortID The interface index of the UNI.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.1
alaEServiceUNIPortL2ProtocolID Name of the L2 protocol entry. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.2
alaEServiceUNIPortL2RxFrames This object describes the total number of frames of this protocol received on this port and trapped to CPU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.3
alaEServiceUNIPortL2TunneledFrames This object describes the total number of frames of this protocol received on this port trapped to CPU and tunneled.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.4
alaEServiceUNIPortL2DroppedFrames This object describes the total number of frames of this protocol received on this port trapped to CPU and dropped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.5
alaEServiceUNIPortL2PeeredFrames This object describes the total number of frames of this protocol received on this port trapped to CPU and peered.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.6
alaEServiceUNIPortL2MACTunneledFrames This object describes the total number of frames of this protocol received on this port trapped to CPU and MAC tunneled.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.7
alaEServiceUNIPortL2MACDeTunneledFrames This object describes the total number of frames of this protocol received on this port trapped to CPU and MAC de-tunneled.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.8
alaEServiceUNIPortL2LastSourceMAC This object specifies the source MAC address of last frame of this protocol on this port trapped to CPU	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.9

A table, that contains NNI port L2 protocol frame statistics.

alaEServiceNNIPortL2ProtocolStatisticsEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1

An E-Service NNI port L2 protocol statistics entry associated with port.

Indexes

alaEServiceNNIPortID

Column	Syntax	OID
alaEServiceNNIPortID The interface index of the NNI.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1.1
alaEServiceNNIPortL2RxMACTunneledFrames This object describes the total number of frames trapped to CPU with tunnel MAC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1.2
alaEServiceNNIPortL2MACTunneledDiscardFrames This object describes the total number of discarded frames that are trapped to CPU with tunnel MAC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1.3
alaEServiceNNIPortL2ClearStats This object is used to clear the NNI port statistics of the interface.	Enumeration Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1.4

A table, that contains UNI profile L2 protocol frame total RX statistics of all ports of the profile

alaEServiceUNIProfileL2ProtocolTotalStatisticsEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15.1

An E-Service UNI profile L2 protocol total RX statistics entry associated with all ports of the UNI profile.

Indexes

alaEServiceUNIProfile

Column	Syntax	OID
alaEServiceUNIProfile A label given to uniquely identify this profile. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15.1.1
alaEServiceUNIProfileL2ProtocolTotalRxFrames This object describes the total number of frames L2 protocol frames received by all the ports of bind to this profile.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15.1.2
alaEServiceUNIProfileL2ProtocolClearStats This object is used to clear the UNI profile statistics of the interface.	Enumerationr/w Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15.1.3

A table, that contains UNI profile L2 well known protocol frame RX statistics of all ports of the profile

alaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1

An E-Service UNI profile L2 well known protocol RX statistics entry associated with all ports of the UNI profile.

Indexes

alaEServiceUNIProfileIEEEL2ProfileID alaEServiceUNIProfileIEEEL2ProtocolIndex

Column	Syntax	OID
alaEServiceUNIProfileIEEEL2ProfileID A label given to uniquely identify this profile. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1.1
alaEServiceUNIProfileIEEEL2ProtocolIndex This object specifies the well known protocol group this row corresponds to.	Enumeration Enumerated Values: 1 lacpLacpmarkerOam 2 ieee802dot1x 3 lldp 4 amap 5 cisco 6 stp 7 gvrpMvrp	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1.2
alaEServiceUNIProfileIEEEL2ProtocolRxFrames This object describes the number of frames this L2 well known protocol frames received by all the ports of bind to this profile.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1.3
alaEServiceUNIProfileIEEEL2ProtocolTreatment This object describes the behavior of the bridge in regards to the destination Mac address matching with the L2 Custom protocol entry mac address on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider…	Enumeration Enumerated Values: 0 invalid 1 fwd 2 drop 3 cpu	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1.4

A table, that contains UNI profile L2 protocol frame RX statistics of all ports of the profile.  Each entry
represents statistics collected for one protocol of the UNI profile.

alaEServiceUNIProfileCustomL2ProtocolStatisticsEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1

An E-Service UNI profile L2 protocol RX statistics entry associated with all ports of the UNI profile.

Indexes

alaEServiceUNIProfileCustomL2StatsProfileID alaEServiceUNIProfileCustomL2ProtocolIndex

Column	Syntax	OID
alaEServiceUNIProfileCustomL2StatsProfileID A label given to uniquely identify this profile. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1.1
alaEServiceUNIProfileCustomL2ProtocolIndex Name of the L2 protocol entry. Must be at least one character long.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1.2
alaEServiceUNIProfileCustomL2ProtocolRxFrames This object describes the total number of frames of this protocol received on this port and trapped to CPU.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1.3
alaEServiceUNIProfileCustomL2ProtocolTreatment This object describes the behavior of the bridge in regards to the destination Mac address matching with the L2 Custom protocol entry mac address on the UNI. Tunnel (1) enables the PDU to be tunneled across the provider…	Enumeration Enumerated Values: 0 invalid 1 fwd 2 drop 3 cpu	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1.4

A table, to clear UNI port L2 protocol frame statistics.

alaEServiceUNIPortL2ProtocolStatisticsClearEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.19.1

An E-Service Service UNI port L2 protocol statistics clear entry associated with port.

Indexes

alaEServiceUNIPortClearID

Column	Syntax	OID
alaEServiceUNIPortClearID The interface index of the UNI.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.19.1.1
alaEServiceUNIPortL2ClearStats This object is used to clear the UNI port statistics of the interface.	Enumerationr/w Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.19.1.2

A table, to clear NNI port L2 protocol frame statistics.

alaEServiceNNIPortL2ProtocolStatisticsClearEntry row .1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.20.1

An E-serive to clear NNI port L2 protocol frame statistics.

Indexes

alaEServiceNNIPortClearID

Column	Syntax	OID
alaEServiceNNIPortClearID The interface index of the NNI.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.20.1.1
alaEServiceNNIPortL2ClearStatistics This object is used to clear the NNI port statistics of the interface.	Enumerationr/w Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.20.1.2