ALCATEL-IND1-BGP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
19
Rows
19
Columns
325
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2 · 1 row entry · 67 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpPeerTable'
BGP IPv4 peer table.
alaBgpPeerEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1
BGP IPv4 Peer configuration entry.
Indexes
No indexes recorded
Column Syntax OID
Ip Address of the peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.1
Autonomous system of the peer.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.2
Enable/Disable the peer passive status. If enabled the peer
will not initiate a transport connection.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.3
A symbolic name for the neighbour.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.4
If enabled the external peer is allowed to be multiple hops away.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.5
The maximum prefixes to be accepted from this peer. If this maximum
is reached, the peer will be sent a NOTIFY message with a CEASE ecode.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.6
If enabled, the operator will be warned when the peer reaches
80% of the configured maximum prefixes. To see this message,
BGP debug for type 'warnings' must be activated and debug level
set to 20.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.7
If enabled, nexthop processing in the updates sent to this
peer is disabled and is set to the ip address of the interface
attached to this peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.8
Enable/Disable dynamic policy configurability on the connection
to this peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.9
Route refresh capability is Enabled/Disabled on the connection
to this peer.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.10
Multiprotocol capability IPv4 Unicast is Enabled/Disabled on
the connection to this peer .
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.11
Multiprotocol capability IPv4 Multicast is Enabled/Disabled
on the connection to this peer .
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.12
The number of route refresh messages received from this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.13
The number of route refresh messages sent to this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.14
The name of the policy map to be applied to the updates sent
to this peer. This is same as alaBgpPolicyRouteMapName.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.15
The name of the policy map to be applied to the updates
received from this peer. This is same as alaBgpPolicyRouteMapName.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.16
Local Ip Address of this connection.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.17
The general reason for termination of last established session
with the peer since the protocol was operationally up.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.18
The time elapsed since the BGP session with the peer was terminated.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.19
The time elapsed since we last read data from the peer.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.20
The Number of notification messages received from this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.21
The Number of notification messages sent to this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.22
The last notification reason sent.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.23
The last notification reason received.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.24
The Number of prefixes received from this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.25
The Number of times this peer session transitioned to IDLE state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.26
This indicates whether the peer belongs to the local autonomous
system(internal) or another autonmous system.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.27
Setting a value of clear into this variable will clear the
per peer statistics.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.28
Enable/Disable the peer autostart status. If enabled, the peer
will be automatically restarted (if administratively enabled)
after the transition to IDLE state.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.29
If enabled this peer is a route reflection client.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.30
If enabled this peer is a member of our confederation.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.31
If enabled private as numbers are stripped out in the updates
sent to this peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.32
TTL count for packets on this TCP connection.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.33
The name of the aspath-list to be applied to the updates
sent to this peer. This is same as alaBgpAspathMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.34
The name of the aspath-list to be applied to the updates
received from this peer. This is same as alaBgpAspathMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.35
The name of the prefix-list to be applied to the updates
sent to this peer. This is same as alaBgpPrefixMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.36
The name of the prefix-list to be applied to the updates
received from this peer. This is same as alaBgpPrefixMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.37
The name of the community-list to be applied to the updates
sent to this peer. This is same as alaBgpCommunityMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.38
The name of the community-list to be applied to the updates
received from this peer. This is same as alaBgpCommunityMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.39
Setting a value of restart into this variable will restart the peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.40
If enabled a default route is sent to this neighbour.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.41
Setting a value of reconfigure into this variable will
re-start inbound policy evaluation of the peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.42
Setting a value of reconfigure into this variable will re-start
outbound policy evaluation of the peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.43
Value of the MD5 key used in TCP connection with the peer.
This field is secured and returned value is non significant.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.44
Value of the MD5 key encrypted using 3DES algorithm.
It is calculated from MD5 key value, and is used only to restore
configuration on reboot.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.45
Row status variable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.46
The Number of times this peer session transitioned to ESTABLISHED state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.47
The time elapsed since we last sent data to the peer.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.48
The Number of messages received from the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.49
The Number of messages sent to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.50
The Number of update messages received from the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.51
The Number of update messages sent to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.52
The time elapsed since the BGP session was operationally up or down to the peer.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.53
The time elapsed since the BGP session with the peer was established.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.54
BGP Identifier of the peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.55
The user defined name used to identify the local IP interface for this
peer's TCP connection.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.56
The graceful restart time interval advertised by this peer. A value of 0 indicates
that this peer is not capable of graceful restart, and has not advertised this capability.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.57
Indicates whether the peer is currently performing a graceful restart. A value of none
indicates that this peer is not capable of graceful restart.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.58
Indicates whether the peer has preserved the forwarding state during
the graceful restart. This value is defined only for a peer that has advertised
graceful restart capability. For peers that are not capable of gracefu…
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.59
Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability
in its BGP OPEN message.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.60
The IPv6 nexthop for IPv6 routes advertised to this peer.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.61
The local port number for this peer's TCP connection.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.62
The size of the socket buffers, in bytes, used for this TCP connection.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.63
If enabled, the Multiprotocol IPv6 Unicast capability is advertised to
this peer. If disabled, the capability is not advertised in the OPEN message.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.64
Enables/Disables BFd for a particular Peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.65
The name of the prefix6-list to be applied to the updates
sent to this peer. This is same as alaBgpPrefix6MatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.66
The name of the prefix6-list to be applied to the updates
received from this peer. This is same as alaBgpPrefix6MatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.67
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3 · 1 row entry · 9 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpAggrTable'
BGP Aggregate configuration table.
alaBgpAggrEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1
BGP Aggregation entry.
Indexes
No indexes recorded
Column Syntax OID
Aggregate address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.1
Aggregate Mask.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.2
If enabled only aggregate is advertised. Otherwise more
specific routes are also advertised.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.3
If enabled aggregate all aspaths.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.4
if active the aggregate is actively being advertised.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.5
This specifies the MED to be used when advertising this
aggregate to external peers. A value of 0 indicates not to send MED.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.6
This specifies the override default LOCAL PREF to be used when
advertising this aggregate to internal peers. A value of 0
indicates not to override the default.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.7
The value to set the COMMUNITY attribute when advertising this
aggregate.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.8
Row status variable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.9
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4 · 1 row entry · 7 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpNetworkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpNetworkTable'
BGP Network configuration table.
alaBgpNetworkEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1
BGP Network entry.
Indexes
No indexes recorded
Column Syntax OID
Aggregate address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.1
Aggregate Mask.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.2
Indicates whether the network is being actively advertised or not.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.3
This specifies the MED to be used when advertising this
network to external peers. A value of 0 indicates not to send MED.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.4
This specifies the override default LOCAL PREF to be used
when advertising this network to internal peers. A value of 0
indicates not to override the default.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.5
The value to set the COMMUNITY attribute when advertising
this network.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.6
Row status variable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.7
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5 · 1 row entry · 19 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpRouteTable'
BGP Routing table.
alaBgpRouteEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1
BGP Route entry.
Indexes
No indexes recorded
Column Syntax OID
Destination address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.1
Destination Mask.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.2
Indicates whether the route is being actively advertised or not.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.3
Number of total paths available to this destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.4
Number of Feasible paths available to this destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.5
The BGP Nexthop to reach this destination.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.6
The IGP Nexthop to reach this destination.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.7
Indicates whether the route is hidden by an aggregate.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.8
Indicates whether the route is an aggregate.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.9
Indicates whether the route is a contributor to an aggregate.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.10
List of (addresses of) neighbours to whom this route has been
advertised is encoded here.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.11
Indicates whether the route is on an aggregate list.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.12
Indicates whether the route is an aggregate waiting for a contributor.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.13
Indicates whether the route is placed on list of EBGP routes.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.14
Indicates whether the route is placed on list of IBGP reflector-client routes.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.15
Indicates whether the route is placed on list of IBGP non-reflector-client routes.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.16
Indicates whether the route is placed on list of local routes.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.17
Indicates whether the route is placed on delete list.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.18
Indicates whether the route is being route flap dampened.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.19
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6 · 1 row entry · 21 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpPathTable'
BGP Path table.
alaBgpPathEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1
BGP path entry.
Indexes
No indexes recorded
Column Syntax OID
Destination address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.1
Destination Mask.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.2
The IP address or the BGP Identifier of the peer who sent this path.
For locally sourced routes, the value is 0.0.0.0. For peers with an
IPv4 address, the value will be the peer's IPv4 address, and the
value of alaBgp…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.3
The protocol from which the path was learnt.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.4
The weight assigned to this path.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.5
The degree of preference assigned to this path.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.6
Indicates the state of the path. When path state is none it
indicates that there are no paths to this prefix/len and the
route is being purged from the system. Stale indicates that the
peer that advertised this rout…
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.7
The ORIGIN attribute of the path.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.8
The NEXTHOP attribute of the path.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.9
The sequence of AS path segments.
Each AS path segment is represented by a triple <TYPE, LENGTH, VALUE>.
The TYPE is a 1-octet field which has two possible values:
(1) AS_SET : unordered set of ASs a route in t…
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.10
The LOCAL_PREF attribute of the path. A value of -1 indicates
the absence of this attribute.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.11
The Multi Exit Disc. attribute of the path. A value of 4294967295
indicates the absence of this attribute.
Unsigned32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.12
Indicates whether this path is generated without selecting a
less specific route.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.13
The AS number of the last BGP4 speaker that performed route
aggregation. A value of 0 indicates the absence of this attribute.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.14
The IP address of the last BGP4 speaker that performed route
aggregation. A value of 0.0.0.0 indicates the absence of this
attribute.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.15
The community attribute of the path. The communities are
represented as series of 4 octet values.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.16
One or more path attributes not understood by this BGP4 speaker.
Size of zero (0) indicates the absence of such attribute(s).
Octets beyond the maximum size, if any, are not recorded by
this object.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.17
The Router Id of the BGP4 speaker that performed route reflection,
if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the
absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Sectio…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.18
Sequence of Cluster Id values representing the reflection path that the route has passed,
if this is a reflected route in the local AS. Size of zero (0) indicates the absence of
this attribute. Refer RFC 2796 (BGP Route…
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.19
Indicates whether the peer who sent this path has an IPv4 address or an
IPv6 address. If set to ipv4, the peer has an IPv4 address, and the value
of alaBgpPathPeerAddr is the peer's IPv4 address. If set to ipv6, the p…
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.20
The symbolic name of the peer that sent this path. For paths
corresponding to local or redistributed routes on this router, the
value is set to 'none'.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.21
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7 · 1 row entry · 9 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpDampTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpDampTable'
BGP Dampened paths table.
alaBgpDampEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1
BGP Network entry.
Indexes
No indexes recorded
Column Syntax OID
Destination address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.1
Destination mask.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.2
Neighbour address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.3
The figure of merit value. This is a floating point value
with 2 digit precision. For example, a value of 3.5 is encoded
as 350, a value of 0.9 is encoded as 90, a value of 9.45 is
encoded as 945.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.4
The number of times this route has flapped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.5
Time in seconds since the flap was noticed.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.6
Time in seconds since this damp entry (figure of merit) was
last updated.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.7
Time in seconds until this route will be reused.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.8
A value of clear will clear this damp history information.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.9
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1 · 1 row entry · 20 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpRouteMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpRouteMapTable'
BGP Policy RouteMap table.
alaBgpRouteMapEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1
BGP Route Map Entry.
Indexes
No indexes recorded
Column Syntax OID
Name of the route map.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.1
Instance of this route map.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.2
This is same as alaBgpAspathMatchListId. It identifies the
matching criteria list of Autonomous system paths. Empty quotes
indicate no autonomous system paths matching criteria is to
be applied.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.3
This is same as alaBgpPrefixMatchListId. It identifies the
matching criteria list of prefixes. Empty quotes indicate no
prefix matching criteria is to be applied.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.4
This is same as alaBgpCommunityMatchListId. It identifies the
matching criteria list of communities. Empty quotes indicate no
community matching criteria is to be applied.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.5
The value to set the origin of the routes matched by this
RouteMap instance. A value of none means no origin is to be set.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.6
The value to set the LOCAL PREF attribute of the routes matched
by this RouteMap instance. This value is added to/is subtracted
from/replaces the LOCAL PREF attribute in conjunction with the
associated value of alaBg…
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.7
This variable specifies how alaBgpRouteMapLocalPref is to be
operated on an existing LPREF attribute of a route on which
this RouteMap instance is applied to.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.8
The value to set the MULTI EXIT DISC attribute of the routes
matched by this RouteMap instance. This value is added to/is
subtracted from/replaces the MULTI EXIT DISC attribute in
conjunction with the associated valu…
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.9
This variable specifies how alaBgpRouteMapMed is to be operated
on an existing MULTI EXIT DISC attribute of a route on which this
RouteMap instance is applied to.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.10
The value to prepend to the AS_PATH attribute of the routes
matched by this RouteMap instance. Empty quotes indicates no
AS_PATH prepending is to be done.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.11
Determines whether alaBgpRouteMapCommunity will be adding to
or replacing the COMMUNITY attribute of the routes matched by
this RouteMap instance.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.12
The value to set the COMMUNITY attribute of the routes matched
by this RouteMap instance.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.13
AsPath regular expression matching primitive.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.14
Prefix match primitive.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.15
Prefix match mask primitive
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.16
Community match primitive
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.17
This sets the weight for the incoming route. This parameter has
no effect on outbound policy.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.18
This determines whether to allow a matching route to pass through.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.19
Row status variable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.20
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2 · 1 row entry · 6 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpAspathMatchListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpAspathMatchListTable'
BGP Policy Aspath criteria matching table.
alaBgpAspathMatchListEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1
Aspath matching entry .
Indexes
No indexes recorded
Column Syntax OID
Identifier of this list of autonomous system path matching criteria.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.1
The regular expression identifying the autnomous system paths
to be matched by this instance.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.2
This determines the order in which the matching regular
expressions are applied in the list identified by
alaBgpAspathMatchListId.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.3
This determines whether to accept or reject a matching route.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.4
Row status variable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.5
The primary index of this list.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.6
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3 · 1 row entry · 7 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpPrefixMatchListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpPrefixMatchListTable'
BGP Policy prefix matching criteria table.
alaBgpPrefixMatchListEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1
BGP Prefix matching instance.
Indexes
No indexes recorded
Column Syntax OID
Identifier of this list of autonomous system path matching criteria.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.1
The address to be matched.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.2
The mask to be matched.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.3
Specifies the minimum length of the mask to be matched. A value
of 0 means this criteria is absent. The value of
alaBgpPrefixMatchListGE must be > length of
(alaBgpPrefixMatchListMask) and < alaBgpPrefixMatchListLE.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.4
Specifies the maximum length (inclusive) of the mask to be matched.
A value of 0 means this criteria is absent. The value of
alaBgpPrefixMatchListLE must be >= alaBgpPrefixMatchListGE
and <= 32.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.5
This determines whether to accept or reject a matching route.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.6
Row status variable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.7
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4 · 1 row entry · 7 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpCommunityMatchListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpCommunityMatchListTable'
BGP Policy Community criteria matching table.
alaBgpCommunityMatchListEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1
Community matching entry .
Indexes
No indexes recorded
Column Syntax OID
Identifier of this list of communities matching criteria.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.1
The string identifying the communities to be matched by this instance.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.2
This determines the order in which the matching regular
expressions are applied in the list identified by
alaBgpCommunityMatchListId.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.3
This determines the matching type.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.4
This determines whether to accept or reject a matching route.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.5
Row status variable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.6
The primary index of this list.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.7
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5 · 1 row entry · 6 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpAspathPriMatchListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpAspathPriMatchListTable'
Priority sorted view of BGP Policy Aspath matching table.
alaBgpAspathPriMatchListEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1
Aspath matching entry .
Indexes
No indexes recorded
Column Syntax OID
Identifier of this list of autonomous system path matching criteria.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.1
This determines the order in which the matching regular
expressions are applied in the list identified by
alaBgpAspathPriMatchListId.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.2
This is the order in which the matching regular expressions
are created in the list identified by alaBgpAspathPriMatchListId.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.3
The regular expression identifying the autnomous system paths
to be matched by this instance
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.4
This determines whether to accept or reject a matching route.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.5
Row status variable.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.6
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6 · 1 row entry · 7 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpCommunityPriMatchListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpCommunityPriMatchListTable'
Priority sorted view of BGP Policy Community matching table.
alaBgpCommunityPriMatchListEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1
Community matching entry .
Indexes
No indexes recorded
Column Syntax OID
Identifier of this list of communities matching criteria.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.1
This determines the order in which the matching regular
expressions are applied in the list identified by
alaBgpCommunityPriMatchListId.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.2
This determines the order in which the matching regular
expressions are created in the list identified by
alaBgpCommunityPriMatchListId.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.3
The string identifying the communities to be matched by
this instance.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.4
This determines the matching type.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.5
This determines whether to accept or reject a matching route.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.6
Row status variable
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.7
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7 · 1 row entry · 7 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpPrefix6MatchListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpPrefix6MatchListTable'
BGP Policy prefix6 matching criteria table.
alaBgpPrefix6MatchListEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1
BGP Prefix6 matching instance.
Indexes
No indexes recorded
Column Syntax OID
Identifier of this list of autonomous system path matching criteria.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.1
The IPv6 Prefix to be matched. A value of 0 indicates default
route prefix.
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.2
The length in bits of the IPv6 prefix being matched. A value of 0 indicates default
route prefix.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.3
Specifies the minimum length of the mask to be matched. A value
of 0 means this criteria is absent. The value of
alaBgpPrefix6MatchListGE must be > length of
(alaBgpPrefix6MatchListAddrLength) and < alaBgpPrefix6MatchLi…
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.4
Specifies the maximum length (inclusive) of the mask to be matched.
A value of 0 means this criteria is absent. The value of
alaBgpPrefix6MatchListLE must be >= alaBgpPrefix6MatchListGE
and <= 32.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.5
This determines whether to accept or reject a matching route.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.6
Row status variable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.7

alaBgpRedistRouteTable

table deprecated
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9 · 1 row entry · 9 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpRedistRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpRedistRouteTable'
A configuration table which controls the routes to be 
redistributed by BGP from other routing protocols. This table has been deprecated.
Use the alaRouteMapRedistProtoTable of AlcatelIND1RouteMap.mib.
alaBgpRedistRouteEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1
A configuration table which controls the routes to be
redistributed by BGP from other routing protocols. This entry has been deprecated.
Use the alaRouteMapRedistProtoEntry of AlcatelIND1RouteMap.mib.
Indexes
No indexes recorded
Column Syntax OID
Protocol from where this route is to be imported from. This object has been
deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.1
The destination IP address of this route. This object has been
deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.2
The network mask for this route. This object has been deprecated.
Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.3
The med to be sent to external peers. If 0, no med is sent. This object
has been deprecated. Use alaRouteMapRedistProtoEntry objects of
AlcatelIND1RouteMap.mib.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.4
The value to override the default local pref sent to
internal peers. If 0, no override is applied. This object has been
deprecated. Use alaRouteMapRedistProtoEntry objects of
AlcatelIND1RouteMap.mib.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.5
The value to set the COMMUNITY attribute when advertising
this network. This object has been deprecated. Use
alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.6
Redistribute all the subnet routes if it is enabled. Otherwise,
redistribute only matching network route. This object has been
deprecated. Use alaRouteMapRedistProtoEntry objects of
AlcatelIND1RouteMap.mib.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.7
Controls the redistribution of routes in this range. This object has been
deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.8
Row status variable. This object has been deprecated. Use
alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.9

alaBgpDebugTable

table deprecated
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10 · 1 row entry · 3 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpDebugTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpDebugTable'
BGP debugging table - has been deprecated in favour of alaDrcTmBgpDebug Configuration.
alaBgpDebugEntry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10.1
BGP debugging entry - has been deprecated in favour of alaDrcTmBgpDebug Configuration.
Indexes
No indexes recorded
Column Syntax OID
All the Debug Events/types described here stands deprecated in favour of
MIB objects defined in alaDrcTmBgpDebug Configuration.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10.1.1
All the Debug Events/types described here stands deprecated in favour of
MIB objects defined in alaDrcTmBgpDebug Configuration.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10.1.2
All the Debug Events/types described here stands deprecated in favour of
MIB objects defined in alaDrcTmBgpDebug Configuration.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10.1.3
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11 · 1 row entry · 7 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpNetwork6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpNetwork6Table'
BGP Network6 configuration table.
alaBgpNetwork6Entry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1
BGP Network6 entry.
Indexes
No indexes recorded
Column Syntax OID
The IPv6 address of the BGP Network.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.1
The number of bits that are significant in the IPv6 address prefix of the BGP Network.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.2
Indicates whether the network is being actively advertised or not.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.3
This specifies the MED to be used when advertising this network to
external peers. A value of 0 indicates not to send MED.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.4
This specifies the override default LOCAL PREF to be used when
advertising this network to internal peers. A value of 0 indicates
not to override the default.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.5
The value to set the COMMUNITY attribute when advertising this network.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.6
Row status variable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.7
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12 · 1 row entry · 19 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpRoute6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpRoute6Table'
BGP IPv6 Routing table.
alaBgpRoute6Entry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1
BGP Route entry.
Indexes
No indexes recorded
Column Syntax OID
Destination address.
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.1
Destination address length.
Unsigned32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.2
Indicates whether the route is being actively advertised or not.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.3
Number of total paths available to this destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.4
Number of Feasible paths available to this destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.5
The BGP Nexthop to reach this destination.
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.6
The IGP Nexthop to reach this destination.
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.7
Indicates whether the route is hidden by an aggregate.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.8
Indicates whether the route is an aggregate.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.9
Indicates whether the route is a contributor to an aggregate.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.10
List of (addresses of) neighbours to whom this route has been
advertised is encoded here.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.11
Indicates whether the route is on an aggregate list.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.12
Indicates whether the route is an aggregate waiting for a contributor.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.13
Indicates whether the route is placed on list of EBGP routes.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.14
Indicates whether the route is placed on list of IBGP reflector-client routes.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.15
Indicates whether the route is placed on list of IBGP non-reflector-client routes.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.16
Indicates whether the route is placed on list of local routes.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.17
Indicates whether the route is placed on delete list.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.18
Indicates whether the route is being route flap dampened.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.19
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13 · 1 row entry · 20 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpPath6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpPath6Table'
BGP Path table.
alaBgpPath6Entry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1
BGP path6 entry.
Indexes
No indexes recorded
Column Syntax OID
Destination address.
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.1
Destination address length.
Unsigned32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.2
The BGP Identifier of the peer who sent this path. For locally
sourced routes, the value is 0.0.0.0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.3
The protocol from which the path was learnt.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.4
The weight assigned to this path.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.5
The degree of preference assigned to this path.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.6
Indicates the state of the path. When path state is none it
indicates that there are no paths to this prefix/len and the
route is being purged from the system. Stale indicates that the
peer that advertised this rout…
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.7
The ORIGIN attribute of the path.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.8
The NEXTHOP attribute of the path.
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.9
The sequence of AS path segments.
Each AS path segment is represented by a triple <TYPE, LENGTH, VALUE>.
The TYPE is a 1-octet field which has two possible values:
(1) AS_SET : unordered set of ASs a route in t…
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.10
The LOCAL_PREF attribute of the path. A value of -1 indicates
the absence of this attribute.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.11
The Multi Exit Disc. attribute of the path. A value of 4294967295
indicates the absence of this attribute.
Unsigned32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.12
Indicates whether this path is generated without selecting a
less specific route.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.13
The AS number of the last BGP4 speaker that performed route
aggregation. A value of 0 indicates the absence of this attribute.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.14
The IP address of the last BGP4 speaker that performed route
aggregation. A value of 0.0.0.0 indicates the absence of this
attribute.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.15
The community attribute of the path. The communities are
represented as series of 4 octet values.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.16
One or more path attributes not understood by this BGP4 speaker.
Size of zero (0) indicates the absence of such attribute(s).
Octets beyond the maximum size, if any, are not recorded by
this object.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.17
The Router Id of the BGP4 speaker that performed route reflection,
if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the
absence of this attribute. Refer RFC 2796 (BGP Route Reflection), Sectio…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.18
Sequence of Cluster Id values representing the reflection path that the route
has passed, if this is a reflected route in the local AS. Size of zero (0)
indicates the absence of this attribute.
Refer RFC 2796 (BGP Ro…
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.19
The symbolic name of the peer that sent this path. For paths
corresponding to local or redistributed routes on this router, the
value is set to 'none'.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.20
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14 · 1 row entry · 75 columns
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBgpPeer6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BGP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BGP-MIB::alaBgpPeer6Table'
BGP IPv6 peer table.
alaBgpPeer6Entry row .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1
BGP IPv6 Peer configuration entry.
Indexes
No indexes recorded
Column Syntax OID
Ipv6 Address of the peer.
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.1
Autonomous system of the peer.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.2
Enable/Disable the peer passive status. If enabled the peer
will not initiate a transport connection.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.3
A symbolic name for the neighbour.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.4
If enabled the external peer is allowed to be multiple hops away.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.5
The maximum prefixes to be accepted from this peer. If this maximum
is reached, the peer will be sent a NOTIFY message with a CEASE ecode.
Unsigned32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.6
If enabled, the operator will be warned when the peer reaches
80% of the configured maximum prefixes. To see this message,
BGP debug for type 'warnings' must be activated and debug level
set to 20.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.7
If enabled, nexthop processing in the updates sent to this
peer is disabled and is set to the IPv6 address of the interface
attached to this peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.8
Enable/Disable dynamic policy configurability on the connection
to this peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.9
Route refresh capability is Enabled/Disabled on the connection
to this peer.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.10
Multiprotocol capability IPv4 Unicast is Enabled/Disabled on
the connection to this peer .
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.11
Multiprotocol capability IPv4 Multicast is Enabled/Disabled
on the connection to this peer .
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.12
The number of route refresh messages received from this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.13
The number of route refresh messages sent to this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.14
The name of the policy map to be applied to the updates sent
to this peer. This is same as alaBgpPolicyRouteMapName.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.15
The name of the policy map to be applied to the updates
received from this peer. This is same as alaBgpPolicyRouteMapName.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.16
Local IPv6 address of this connection.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.17
The general reason for termination of last established session
with the peer since the protocol was operationally up.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.18
The time elapsed since the BGP session with the peer was terminated.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.19
The time elapsed since we last read data from the peer.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.20
The Number of notification messages received from this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.21
The Number of notification messages sent to this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.22
The last notification reason sent.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.23
The last notification reason received.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.24
The Number of prefixes received from this peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.25
The Number of times this peer session transitioned to IDLE state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.26
This indicates whether the peer belongs to the local autonomous
system(internal) or another autonomous system.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.27
Setting a value of clear into this variable will clear the
per peer statistics.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.28
Enable/Disable the peer autostart status. If enabled, the peer
will be automatically restarted (if administratively enabled)
after the transition to IDLE state.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.29
If enabled this peer is a route reflection client.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.30
If enabled this peer is a member of our confederation.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.31
If enabled private as numbers are stripped out in the updates
sent to this peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.32
TTL count for packets on this TCP connection.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.33
The name of the aspath-list to be applied to the updates
sent to this peer. This is same as alaBgpAspathMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.34
The name of the aspath-list to be applied to the updates
received from this peer. This is same as alaBgpAspathMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.35
The name of the prefix-list to be applied to the updates
sent to this peer. This is same as alaBgpPrefixMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.36
The name of the prefix-list to be applied to the updates
received from this peer. This is same as alaBgpPrefixMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.37
The name of the community-list to be applied to the updates
sent to this peer. This is same as alaBgpCommunityMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.38
The name of the community-list to be applied to the updates
received from this peer. This is same as alaBgpCommunityMatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.39
Setting a value of restart into this variable will restart the peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.40
If enabled a default route is sent to this neighbour.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.41
Setting a value of reconfigure into this variable will
re-start inbound policy evaluation of the peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.42
Setting a value of reconfigure into this variable will re-start
outbound policy evaluation of the peer.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.43
Value of the MD5 key used in TCP connection with the peer.
This field is secured and returned value is non significant.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.44
Value of the MD5 key encrypted using 3DES algorithm.
It is calculated from MD5 key value, and is used only to restore
configuration on reboot.
OctetString .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.45
Row status variable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.46
The Number of times this peer session transitioned to ESTABLISHED state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.47
The time elapsed since we last sent data to the peer.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.48
The Number of messages received from the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.49
The Number of messages sent to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.50
The Number of update messages received from the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.51
The Number of update messages sent to the peer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.52
The time elapsed since the BGP session was operationally up or down to the peer.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.53
The time elapsed since the BGP session with the peer was established.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.54
BGP Identifier of the peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.55
The user defined name used to identify the local IPv6 interface for this
peer's TCP connection.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.56
The graceful restart time interval advertised by this peer. A value of 0 indicates
that this peer is not capable of graceful restart, and has not advertised this capability.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.57
Indicates whether the peer is currently performing a graceful restart. A value of none
indicates that this peer is not capable of graceful restart.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.58
Indicates whether the peer has preserved the forwarding state during
the graceful restart. This value is defined only for a peer that has advertised
graceful restart capability. For peers that are not capable of gracefu…
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.59
Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability
in its BGP OPEN message.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.60
Time interval in seconds for the Hold Timer established with the peer.
The value of this object is calculated by this BGP speaker by using the
smaller of the value in alaBgpPeer6HoldTimeConfigured and the Hold Time
r…
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.61
Time interval in seconds for the KeepAlive timer established with the peer.
The value of this object is calculated by this BGP speaker such that,
when compared with alaBgpPeer6HoldTime, it has the same proportion as w…
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.62
Time interval in seconds for the ConnectRetry timer. The suggested value
for this timer is 120 seconds.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.63
Time interval in seconds for the Hold Time configured for this BGP speaker
with this peer. This value is placed in an OPEN message sent to this peer
by this BGP speaker, and is compared with the Hold Time field in an …
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.64
Time interval in seconds for the KeepAlive timer configured for this BGP
speaker with this peer. The value of this object will only determine the
KEEPALIVE messages' frequency relative to the value specified in
alaBg…
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.65
The IPv4 nexthop address to be used for IPv4 routes advertised to this peer.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.66
The IPv6 nexthop address to be used for IPv6 routes advertised to this peer.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.67
The desired state of the BGP connection. A transition from 'stop' to 'start'
will cause the BGP Start Event to be generated. A transition from 'start' to
'stop' will cause the BGP Stop Event to be generated. This param…
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.68
The BGP peer connection state.
Enumeration .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.69
The local port number for this peer's TCP connection.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.70
The size of the socket buffers, in bytes, used for this TCP connection.
Integer32 .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.71
If enabled, the Multiprotocol IPv6 Unicast capability is advertised to
this peer. If disabled, the capability is not advertised in the OPEN message.
Enumerationr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.72
Time interval in seconds for the MinRouteAdvertisementInterval timer.
Integer32r/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.73
The name of the prefix6-list to be applied to the updates
sent to this peer. This is same as alaBgpPrefix6MatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.74
The name of the prefix6-list to be applied to the updates
received from this peer. This is same as alaBgpPrefix6MatchListId.
OctetStringr/w .1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.75