ALCATEL-ENT1-VLAN-MGR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

vlanTable

table
.1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-VLAN-MGR-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-VLAN-MGR-MIB::vlanTable' 
A list of Virtual LAN instances in this device.
vlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1
A VLAN entry.
Indexes
Column Syntax OID
vlanNumber
The VLAN number identifying this instance. Valid
range from 1 to 4094.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.1
vlanDescription
Textual description of the VLAN instance.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.2
vlanAdmStatus
The administrative status which can be set by
configuration. Disable(1) will disable ALL vports
that are connected to this VLAN, enable(2) will enable
ALL ports on this VLAN, delete(3) will detach and
delete the ports/r…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.3
vlanOperStatus
Provide operating status of a particular VLAN environment.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.4
vlanStatus
Row status to control creation/deletion of vlans.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.5
vlanRouterStatus
Indicates if any IP routers are configured on this vlan.
Enumeration
Enumerated Values:
0none
1ipv4router
2ipv6router
3both
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.6
vlanSrcLearningStatus
Indicates whether the mac learning is enabled or disabled
on this vlan.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.7
vlanType
The type of the vlan
Enumerationr/w
Enumerated Values:
0invalid
1service
2multicastEnt
3multicastService
4dynamic
5standard
6ipc
7vipVlan
8erpVlan
9mtpVlan
10unpDynamic
11dynamicRemote
12bvlan
13controlBvlan
14evbVlan
15vcmipc
16fcoeVlan
17openflowVlan
18routerVlan
19primaryVlan
20isolatedVlan
21communityVlan
22allVlan
23invalidVlan
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.8
vlanMtu
Maximum transmission unit i.e. the maximum size of packet that this
vlan can handle. It ranges from 512 to 1500 (for OS6XXX) and 10222
(for OS7XXX and OS8XXX) with e2 encapsulation.With snap encapsulation
it ranges from…
Integer32r/w
Constraints:
range: 512-10222
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.9
vlanAfdCfg
Specifies whether config was generated by AFD or user, 1 specifies user config and
2 specifies afd config
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.1.1.1.10

vpaTable

table
.1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vpaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-VLAN-MGR-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-VLAN-MGR-MIB::vpaTable' 
A list of Virtual LAN instances in this device.
vpaEntry row .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1
A VLAN-Port Association (VPA) entry.
Indexes
Column Syntax OID
vpaVlanNumber
The VLAN number component of this instance. Valid
range from 1 to 4094.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.1
vpaIfIndex
The ifIndex component of this instance.
Unsigned32
Constraints:
range: 1001-4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.2
vpaType
The type of this vpa. Two are statically configured:
configured default VPA and qTagged VPA.
The other two are dynamically created according to rules/policies:
dynamic default and mobile. The dynamic default VPA is th…
Enumerationr/w
Enumerated Values:
0invalid
1cfgDefault
2qTagged
3dynamic
4vstkDoubleTag
5vstkTranslate
6forbidden
7mirrored
8bvpa
9unpUntagged
10unpTagged
11evbTagged
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.3
vpaState
The state of this vpa:
1. inactive - link down
2. blocking - link up, forwarding down
3. forwarding - link up, forwarding up, sources learned normally
4. filtering - link up, forwarding up, sources filtered
5. DHL …
Enumeration
Enumerated Values:
0forwarding
1blocking
2inactive
3invalid
4dhlBlocking
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.4
vpaStatus
This is used to create or delete staticPrimary VPAs (default vlans
on a port ). Creation replaces the existing staticPrimary VPA
while deletion replaces the existing VPA so that the vlan number
is 1 for the given port.…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.3.1.1.2.1.1.5