ALCATEL-ENT1-TIMETRA-MPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
173

vRtrMplsLspTable

table
.1.3.6.1.4.1.6527.3.1.2.6.1 · 1 row entry · 40 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsLspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsLspTable' 
The vRtrMplsLspTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system.
vRtrMplsLspEntry row .1.3.6.1.4.1.6527.3.1.2.6.1.1
Each row entry represents a Labeled Switch Path (LSP) configured
for a virtual router in the system. Entries can be created and
deleted via SNMP SET operations. Setting RowStatus to 'active'
requires vRtrMplsLspName t…
Indexes
Column Syntax OID
vRtrMplsLspIndex
The unique value which identifies this Labeled Switch
Path (LSP) for this virtual router in the Alcatel 7x50
SR system. It is a unique value among entries with the
same value of vRtrID.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxVRtrMplsLspID
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.1
vRtrMplsLspRowStatus
The row status used for creation, deletion, or control
of vRtrMplsLspTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspName must
have been assigned a valid value.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.2
vRtrMplsLspLastChange
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.3
vRtrMplsLspName
Administrative name for this Labeled Switch Path.
The vRtrMplsLspName must be unique within a virtual
router instance.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.4
vRtrMplsLspAdminState
The desired administrative state for this LSP.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.5
vRtrMplsLspOperState
The current operational state of this LSP.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.6
vRtrMplsLspFromAddr
Source IP address of this LSP. If vRtrMplsLspFromAddr has not
been explicitly set, the system IP address will be used.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.7
vRtrMplsLspToAddr
Destination IP address of this LSP. This LSP will not be
signaled until vRtrMplsLspToAddr is explicitly set.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.8
vRtrMplsLspType
The vRtrMplsLspType object is an enumerated value that indicates
whether the label value is statically or dynamically assigned or
whether the LSP will be used exclusively for bypass protection.
Enumerationr/w
Enumerated Values:
1unknown
2dynamic
3static
4bypass-only
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.9
vRtrMplsLspOutSegIndx
The vRtrMplsLspOutSegIndx is the index value of the entry in
the mplsOutSegmentTable associated with this vRtrMplsLspEntry
when vRtrMplsLspType is 'static'. If vRtrMplsLspType is
'dynamic', the value of this object wi…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.10
vRtrMplsLspRetryTimer
The value of vRtrMplsLspRetryTimer specifies the time in seconds
the software will wait before attempting the establish the
failed LSP.
secondsUnsigned32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.11
vRtrMplsLspRetryLimit
The value of vRtrMplsLspRetryLimit specifies the number of
attempts the software should make to reestablish a failed LSP
before the LSP is disabled. A value of 0 indicates that an
infinite number of retry attempts shou…
Unsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.12
vRtrMplsLspMetric
The value of vRtrMplsLspMetric specifies the metric for this
LSP which is used to select an LSP among a set of LSPs which are
destined to the same egress 7x50 router. The LSP with the lowest
metric will be selected.
…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.13
vRtrMplsLspDecrementTtl
When the value of vRtrMplsLspDecrementTtl is 'true', the ingress
ESR writes the TTL of the IP packet into the label and each
transit ESR decrements the TTL in the label. At the egress ESR
the TTL value from the labe…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.14
vRtrMplsLspCspf
When the value of vRtrMplsLspCspf is 'true', CSPF computation
for constrained-path LSP is enabled. When the value of
vRtrMplsLspCspf is 'false' CSPF computation is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.15
vRtrMplsLspFastReroute
When the value of vRtrMplsLspFastReroute is 'true', fast reroute
is enabled. A pre-computed detour LSP is created from each node
in the primary path of this LSP. In case of a failure of a link
or LSP between two node…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.16
vRtrMplsLspFRHopLimit
The value of vRtrMplsLspFRHopLimit specifies the total number
of hops a detour LSP can take before merging back onto the
main LSP path.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.17
vRtrMplsLspFRBandwidth
The value of vRtrMplsLspFRBandwidth specified the amount of
bandwidth in mega-bits per second (Mbps) to be reserved for the
detour LSP. A value of zero (0) indicates that no bandwidth
is reserved.
mega-bits per secondSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.18
vRtrMplsLspClassOfService
The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspClassOfService.
The EXP bits in the MPLS header are set based on the global
mapping table that specified the m…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.19
vRtrMplsLspSetupPriority
The value of vRtrMplsLspSetupPriority specifies the setup priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.20
vRtrMplsLspHoldPriority
The value of vRtrMplsLspHoldPriority specifies the hold priority
to use when insufficient bandwidth is available to setup a LSP.
The setup priority is compared against the hold priority of
existing LSPs. If the setup p…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.21
vRtrMplsLspRecord
When the value of vRtrMplsLspRecord is 'true', recording of all
the hops that a LSP traverses is enabled.

When the value of vRtrMplsLspRecord is 'false, recording of all
the hops that a LSP traverses is d…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.22
vRtrMplsLspPreference
The value of vRtrMplsLspPreference specifies the preference for
the LSP. This value is used for load balancing between multiple
LSPs that exist between the same ingress and egress routers.
By default, traffic is load b…
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.23
vRtrMplsLspBandwidth
The value of vRtrMplsLspBandwidth specifies the amount of
bandwidth in mega-bits per second (Mbps) to be reserved for the LSP.
A value of zero (0) indicates that no bandwidth is reserved.

When vRtrMplsLsp…
mega-bits per secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.24
vRtrMplsLspBwProtect
When vRtrMplsLspBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guaranteed
bandwidth. It is expected that multip…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.25
vRtrMplsLspHopLimit
The value of vRtrMplsLspHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
exceeded.

When the value …
Unsigned32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.26
vRtrMplsLspNegotiatedMTU
The value of vRtrMplsLspNegotiatedMTU specifies the size
for the Maximum transmission unit (MTU) that is negotiated
during LSP establishment.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.27
vRtrMplsLspRsvpResvStyle
The value of vRtrMplsLspRsvpResvStyle specifies the reservation
style for RSVP. The reservation style can be set to 'Shared-
Explicit' (se) or 'Fixed-Filter' (ff).
Enumerationr/w
Enumerated Values:
1se
2ff
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.28
vRtrMplsLspRsvpAdspec
When the value of vRtrMplsLspRsvpAdspec is 'true', the ADSPEC
object will be included in RSVP messages.
When the value of vRtrMplsLspRsvpAdspec is 'false', the ADSPEC
object will not be included in RSVP messages.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.29
vRtrMplsLspFRMethod
The value of vRtrMplsLspFRMethod specifies the fast reroute
method used.

In the 'One-to-one Backup' method, a backup LSP is established
which will intersect the original LSP somewhere downstream
of the…
Enumerationr/w
Enumerated Values:
1oneToOneBackup
2facilityBackup
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.30
vRtrMplsLspFRNodeProtect
Setting the value of vRtrMplsLspFRNodeProtect to 'true' enables
node protection i.e. protection against the failure of a node on
the LSP.

Setting the value to 'false' disables node protection.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.31
vRtrMplsLspAdminGroupInclude
The value of vRtrMplsLspAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when
this LSP is setup. If bit 'n' is set, then the admin group
with value 'n' is included for this L…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.32
vRtrMplsLspAdminGroupExclude
The value of vRtrMplsLspAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when
this LSP is setup. If bit 'n' is set, then the admin group
with value 'n' is excluded for this L…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.33
vRtrMplsLspAdaptive
Setting the value of vRtrMplsLspAdaptive to 'true' enables
make-before-break functionality for the LSP. When the attributes
of an already established LSP are changed, either through manual
configuration or due to a cha…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.34
vRtrMplsLspInheritance
For each writable object in this row that can be configured to
inherit its value from the corresponding object in the
vRtrMplsGeneralTable, there is bit within vRtrMplsLspInheritance
that controls whether to inherit th…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.35
vRtrMplsLspOptimizeTimer
The value of vRtrMplsLspOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSP.

When CSPF is enabled, changes in the network topology may cause
the …
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.36
vRtrMplsLspOperFastReroute
The value of vRtrMplsLspOperFastReroute specifies whether the
operational LSP has fast reroute enabled or disabled.

When make-before-break functionality for the LSP is enabled and
if the fast reroute set…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.37
vRtrMplsLspFRObject
The value of vRtrMplsLspFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without
the fast reroute object. The value of vRtrMplsLspFRObject is
ignored if fast reroute is dis…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.38
vRtrMplsLspHoldTimer
The value of vRtrMplsLspHoldTimer specifies the time, in
seconds, for which the ingress node holds a bit before
programming its data plane and declaring the lsp up to
the service module.

The value of…
secondsUnsigned32
Constraints:
range: 0-10
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.39
vRtrMplsLspCspfTeMetricEnabled
The value of vRtrMplsLspCspfTeMetricEnabled specifies whether the TE
metric would be used for the purpose of the LSP path computation by CSPF.
When the value of this object is 'false', the IGP metric is used to
comput…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.1.1.40

vRtrMplsLspStatTable

table
.1.3.6.1.4.1.6527.3.1.2.6.2 · 1 row entry · 13 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsLspStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsLspStatTable' 
The vRtrMplsLspStatTable has an entry for each Labeled Switch
Path (LSP) configured for a virtual router in the system.
vRtrMplsLspStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.2.1
Each row entry represents a collection of statistics for a
Labeled Switch Path (LSP) configured for a virtual router in
the system.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
vRtrMplsLspOctets
The number of octets that have been forwarded over current
LSP active path. The number reported is not realtime, may
be subject to several minutes delay. The delay is controllable
by MPLS statistics gathering interva…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.1
vRtrMplsLspPackets
The number of packets that have been forwarded over current
LSP active path. The number reported is not realtime, may
be subject to several minutes delay. The delay is controllable
by MPLS statistics gathering interv…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.2
vRtrMplsLspAge
The age (i.e., time from creation till now) of this LSP in
10-millisecond periods.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.3
vRtrMplsLspTimeUp
The total time in 10-millisecond units that this LSP has been
been operational. For example, the percentage up time can be
determined by computing (vRtrMplsLspTimeUp/vRtrMplsLspAge * 100 %).
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.4
vRtrMplsLspTimeDown
The total time in 10-millisecond units that this LSP has not
been operational.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.5
vRtrMplsLspPrimaryTimeUp
The total time in 10-millisecond units that this LSP's primary
path has been operational. For example, the percentage
contribution of the primary path to the operational time is
given by (vRtrMplsLspPrimaryTimeUp/vR…
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.6
vRtrMplsLspTransitions
The number of state transitions (up -> down and down -> up)
this LSP has undergone.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.7
vRtrMplsLspLastTransition
The time in 10-millisecond units since the last transition
occurred on this LSP.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.8
vRtrMplsLspPathChanges
The number of path changes this LSP has had. For every path
change (path down, path up, path change), a corresponding
syslog/trap (if enabled) is generated for it.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.9
vRtrMplsLspLastPathChange
The time in 10-millisecond units since the last change
occurred on this LSP.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.10
vRtrMplsLspConfiguredPaths
The number of paths configured for this LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.11
vRtrMplsLspStandbyPaths
The number of standby paths configured for this LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.12
vRtrMplsLspOperationalPaths
The number of operational paths for this LSP. This includes
the path currently active, as well as operational standby
paths.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.2.1.13

vRtrMplsLspPathTable

table
.1.3.6.1.4.1.6527.3.1.2.6.4 · 1 row entry · 36 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsLspPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsLspPathTable' 
The vRtrMplsLspPathTable provides an association between an
LSP and a path.  An LSP can have more than one path association,
but only one of those paths can be specified as the primary
path type.  Paths are defined in as Tunnel entries in the
mplsTunnelTable in the MPLS-TE-MIB.
vRtrMplsLspPathEntry row .1.3.6.1.4.1.6527.3.1.2.6.4.1
Each row entry represents an association between a Labeled Switch
Path (LSP) in the vRtrMplsLspTable and a path (or tunnel) entry in
the mplsTunnelTable. Entries in this table can be created and
deleted via SNMP SET op…
Indexes
Column Syntax OID
vRtrMplsLspPathRowStatus
The row status used for creation, deletion, or control
of vRtrMplsLspPathTable entries. Before the row can be
placed into the 'active' state vRtrMplsLspPathType must
have been assigned a valid value.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.1
vRtrMplsLspPathLastChange
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.2
vRtrMplsLspPathType
This variable is an enum that represents the role this
path is taking within this LSP.
Enumerationr/w
Enumerated Values:
1other
2primary
3standby
4secondary
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.3
vRtrMplsLspPathCos
The configured Class Of Service (COS) for this path. If
the value is between 0 and 7 inclusive, this value
will be inserted in the 3 bit COS field in the label.
If the value is 255, the value in the COS field of
the la…
Integer32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.4
vRtrMplsLspPathProperties
The set of configured properties for this path expressed
as a bit map. For example, if the path is an adaptive
path, the bit corresponding to bit value 1 is set.
Bits
Enumerated Values:
0record-route
1adaptive
2cspf
3mergeable
4fast-reroute
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.5
vRtrMplsLspPathBandwidth
The value of vRtrMplsLspPathBandwidth specifies the amount
of bandwidth in mega-bits per seconds (Mbps) to be reserved
for this LSP path. A value of zero (0) indicates that no
bandwidth is reserved.
mega-bits per secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.6
vRtrMplsLspPathBwProtect
When vRtrMplsLspPathBwProtect has a value of 'true', bandwidth
protection is enabled on a LSP. LSPs that reserve bandwidth
will be used for EF services where customers need guaranteed
bandwidth. It is expected that mu…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.7
vRtrMplsLspPathState
The current working state of this path within this LSP.
Enumeration
Enumerated Values:
1unknown
2active
3inactive
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.8
vRtrMplsLspPathPreference
When there is no path in the LSP with vRtrMplsLspPathType
value of 'primary', 'secondary' type paths of this LSP
with the same value of vRtrMplsLspPathPreference are used
for load sharing. When a 'primary' type path e…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.9
vRtrMplsLspPathCosSource
When vRtrMplsLspPathCosSource is set to 'true', the value of
vRtrMplsLspPathClassOfService overrides vRtrMplsLspClassOfService.
When 'false', the value of vRtrMplsLspClassOfService is used.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.10
vRtrMplsLspPathClassOfService
The name of the class of service value to be assigned to all
packets on the LSP is specified with vRtrMplsLspPathClassOfService.
The EXP bits in the MPLS header are set based on the global
mapping table that specified t…
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.11
vRtrMplsLspPathSetupPriority
The value of vRtrMplsLspPathSetupPriority specifies the setup
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the hold priority of
existing LSPs. If th…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.12
vRtrMplsLspPathHoldPriority
The value of vRtrMplsLspPathHoldPriority specifies the hold
priority to use when insufficient bandwidth is available to setup
a LSP. The setup priority is compared against the hold priority of
existing LSPs. If the …
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.13
vRtrMplsLspPathRecord
When the value of vRtrMplsLspPathRecord is 'record', recording of
all the hops that a LSP traverses is enabled.

When the value of vRtrMplsLspPathRecord is 'noRecord', recording
of all the hops that a LS…
Enumerationr/w
Enumerated Values:
1record
2noRecord
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.14
vRtrMplsLspPathHopLimit
The value of vRtrMplsLspPathHopLimit specifies the maximum number
of hops that a LSP will traverse including the ingress and
egress ESRs. A LSP will not be setup if the hop limit is
exceeded.

When the …
Unsigned32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.15
vRtrMplsLspPathSharing
When vRtrMplsLspPathSharing has a value of 'true', path-sharing
is enabled for the secondary path. Path-sharing is used to
control the hops of the secondary path.

When vRtrMplsLspPathSharing have a value…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.16
vRtrMplsLspPathAdminState
The desired administrative state for this LSP path.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.17
vRtrMplsLspPathOperState
The current operational state of this LSP path.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.18
vRtrMplsLspPathInheritance
For each writable object in this row that can be configured to
inherit its value from its corresponding object in the
vRtrMplsLspTable, controls whether to inherit the operational value
of that object, or use the admi…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.19
vRtrMplsLspPathLspId
This value identifies the label switched path that
is signaled for this entry.
MPLS-LSR-MIBMplsLSPID
Type Constraints:
range: 0..31
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.20
vRtrMplsLspPathRetryTimeRemaining
The time in 10-millisecond units to signal this path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.21
vRtrMplsLspPathTunnelARHopListIndex
Primary index into the mplsTunnelARHopTable identifying a
particular recorded hop list. A value of 0 implies that there
is no recored hop list associated with this LSP path.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.22
vRtrMplsLspPathNegotiatedMTU
The value of vRtrMplsLspPathNegotiatedMTU specifies the size
for the Maximum transmission unit (MTU) that is negotiated
during establishment of this LSP Path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.23
vRtrMplsLspPathFailCode
The value of vRtrMplsLspPathFailCode specifies the reason code
for LSP Path failure. A value of 0 indicates that no failure
has occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.24
vRtrMplsLspPathFailNodeAddr
The value of vRtrMplsLspPathFailNodeAddr specifies the IP address
of the node in the LSP path at which the LSP path failed. When
no failure has occurred, this value is 0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.25
vRtrMplsLspPathAdminGroupInclude
The value of vRtrMplsLspPathAdminGroupInclude is a bit-map that
specifies a list of admin groups that should be included when
this LSP path is setup. If bit 'n' is set, then the admin group
with value 'n' is included f…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.26
vRtrMplsLspPathAdminGroupExclude
The value of vRtrMplsLspPathAdminGroupExclude is a bit-map that
specifies a list of admin groups that should be excluded when
this LSP path is setup. If bit 'n' is set, then the admin group
with value 'n' is excluded f…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.27
vRtrMplsLspPathAdaptive
Setting the value of vRtrMplsLspPathAdaptive to 'true', enables
make-before-break functionality for the LSP path.

Setting the value to 'false', disables make-before-break
functionality for the …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.28
vRtrMplsLspPathOptimizeTimer
The value of vRtrMplsLspPathOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSP path.

When CSPF is enabled, changes in the network topology may c…
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.29
vRtrMplsLspPathNextOptimize
The value of vRtrMplsLspPathNextOptimize specifies the current value
of the optimize timer. This is the time, in seconds, remaining till
the optimize timer will expire and optimization will be started for
the LSP path.
secondsUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.30
vRtrMplsLspPathOperBandwidth
The value of vRtrMplsLspPathOperBandwidth specifies the amount of
bandwidth in mega-bits per seconds (Mbps) that has been reserved
for the operational LSP path.

When make-before-break functionality for th…
mega-bits per secondSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.31
vRtrMplsLspPathMBBState
The value of vRtrMplsLspPathMBBState specifies the state of the
most recent invocation of the make-before-break functionality.

Possible states are:

none (1) - no make-before-break …
Enumeration
Enumerated Values:
1none
2success
3inProgress
4fail
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.32
vRtrMplsLspPathResignal
Setting the value of vRtrMplsLspPathResignal to 'doAction' triggers
the re-signaling of the LSP path.

If the LSP path is operationally down either due to network failure
or due to the retry attempts coun…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxActionTyper/w
Type Values:
1doAction
2notApplicable
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.33
vRtrMplsLspPathTunnelCRHopListIndex
Primary index into the vRtrMplsTunnelCHopTable identifying a
particular computed hop list. A value of 0 implies that there
is no computed hop list associated with this LSP path.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.34
vRtrMplsLspPathOperMTU
The value of vRtrMplsLspPathOperMTU specifies the size
for the Maximum transmission unit (MTU) that is currently
operation for this LSP Path.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.35
vRtrMplsLspPathRecordLabel
When the value of vRtrMplsLspPathRecordLabel is 'record',
recording of labels at each node that a LSP traverses is
enabled.

When the value of vRtrMplsLspPathRecordLabel is 'noRecord',
recording of labe…
Enumerationr/w
Enumerated Values:
1record
2noRecord
 .1.3.6.1.4.1.6527.3.1.2.6.4.1.36

vRtrMplsLspPathStatTable

table
.1.3.6.1.4.1.6527.3.1.2.6.5 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsLspPathStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsLspPathStatTable' 
The vRtrMplsLspPathStatTable has an entry for an association 
between a Labeled Switch Path (LSP) in the vRtrMplsLspTable 
and a path (or tunnel) entry in the mplsTunnelTable.
vRtrMplsLspPathStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.5.1
Each row entry represents a collection of statistics for
an association between a Labeled Switch Path (LSP) in the
vRtrMplsLspTable and a path (or tunnel) entry in the
mplsTunnelTable.

Entries cannot be…
Indexes
No indexes recorded
Column Syntax OID
vRtrMplsLspPathTimeUp
The total time in 10-millisecond units that this LSP path has
been operational. For example, the percentage up time can be
determined by computing (vRtrMplsLspPathTimeUp/vRtrMplsLspAge * 100 %).
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.6527.3.1.2.6.5.1.1
vRtrMplsLspPathTimeDown
The total time in 10-millisecond units that this LSP Path has
not been operational.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.6527.3.1.2.6.5.1.2
vRtrMplsLspPathRetryAttempts
The number of unsuccessful attempts which have been made to
signal this path. As soon as the path gets signalled, this is
set to 0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.5.1.3
vRtrMplsLspPathTransitionCount
The object vRtrMplsLspPathTransitionCount maintains the number
of transitions that have occurred for this LSP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.5.1.4
vRtrMplsLspPathCspfQueries
The value of vRtrMplsLspPathCspfQueries specifies the number
of CSPF queries that have been made for this LSP path.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.5.1.5

vRtrMplsXCTable

table
.1.3.6.1.4.1.6527.3.1.2.6.6 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsXCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsXCTable' 
This table has an entry for each mplsXCEntry
in the mplsXCTable.  It serves as an another
indirect index to the mplsXCTable.
vRtrMplsXCEntry row .1.3.6.1.4.1.6527.3.1.2.6.6.1
An entry in this table represents the indices
to be used to search the mplsXCTable.
Indexes
Column Syntax OID
vRtrMplsXCIndex
An index of the mplsXCTable. It represents
mplsXCIndex, a field of the mplsXCTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.1
vRtrMplsInSegmentIfIndex
An index of the mplsXCTable. It represents
mplsInSegmentIfIndex of the mplsInSegmentTable.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.2
vRtrMplsInSegmentLabel
An index of the mplsXCTable. It represents
mplsInSegmentLabel of the mplsInSegmentTable.
MPLS-LSR-MIBMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.3
vRtrMplsOutSegmentIndex
An index of the mplsXCTable. It represents
mplsOutSegmentIndex of the mplsOutSegmentTable.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.4
vRtrMplsERHopTunnelIndex
Primary index into the mplsTunnelHopTable identifying a particular
recorded hop list (stores ERO in LSR).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.5
vRtrMplsARHopTunnelIndex
Primary index into the mplsTunnelARHopTable identifying a particular
recorded hop list (stores RRO in LSR).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.6
vRtrMplsRsvpSessionIndex
An index into the vRtrRsvpSessionTable identifying a particular RSVP
session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.7
vRtrMplsXCFailCode
The value of vRtrMplsXCFailCode specifies the reason code for
cross-connect failure. A value of 0 indicates that no failure
occurred.
TmnxMplsLspFailCode
Type Values:
0noError
1admissionControlError
2noRouteToDestination
3trafficControlSystemError
4routingError
5noResourcesAvailable
6badNode
7routingLoop
8labelAllocationError
9badL3PID
10tunnelLocallyRepaired
11unknownObjectClass
12unknownCType
13noEgressMplsInterface
14noEgressRsvpInterface
15looseHopsInFRRLsp
16unknown
17retryExceeded
18noCspfRouteOwner
19noCspfRouteToDestination
20hopLimitExceeded
21looseHopsInManualBypassLsp
22emptyPathInManualBypassLsp
23lspFlowControlled
24srlgSecondaryNotDisjoint
25srlgPrimaryCspfDisabled
26srlgPrimaryPathDown
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.8
vRtrMplsXCCHopTableIndex
Index to the vRtrMplsTunnelCHopTable entries that specify
the hops for the CSPF path for a detour LSP for this tunnel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.6.1.9

vRtrMplsGeneralTable

table
.1.3.6.1.4.1.6527.3.1.2.6.7 · 1 row entry · 15 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsGeneralTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsGeneralTable' 
The vRtrMplsGeneralTable contains objects for general control and
management of an MPLS protocol instance within a virtual router.
vRtrMplsGeneralEntry row .1.3.6.1.4.1.6527.3.1.2.6.7.1
Each row entry represents an instance of the MPLS protocol running
within a virtual router. Entries in this table cannot be
created and deleted via SNMP SET operations. An entry in this table
is created by the agent …
Indexes
Column Syntax OID
vRtrMplsGeneralLastChange
The sysUpTime when this row was last modified.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.1
vRtrMplsGeneralAdminState
When vRtrMplsGeneralAdminState is set to 'inService', the agent
attempts to enable the MPLS protocol instance on this router.

When vRtrMplsGeneralAdminState is set to 'outOfService', the
agent attempts to…
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.2
vRtrMplsGeneralOperState
vRtrMplsGeneralOperState indicates the current operating state
of this MPLS protocol instance on this router.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.3
vRtrMplsGeneralPropagateTtl
When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs,
the ingress ESR writes the TTL of the IP packet in the label and
each transit ESR decrements the TTL in the label. At the egress
ESR the TTL value from…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.4
vRtrMplsGeneralTE
The value of vRtrMplsGeneralTE specifies the type of traffic
engineering used with this MPLS instance.
Enumerationr/w
Enumerated Values:
1none
2bgp
3bgpigp
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.5
vRtrMplsGeneralNewLspIndex
This object is used to assign values to vRtrMplsLspIndex as
described in 'Textual Conventions for SNMPv2'. The network
manager reads the object, and then writes the value back
in the SET request that creates a new inst…
SNMPv2-TCTestAndIncrr/w
Type Constraints:
range: 0..2147483647
Description:
Represents integer-valued information used for atomic
operations. When the management protocol is used to specify
that an object instance having this syntax is to be
modified, the new value supplied via the management …
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.6
vRtrMplsGeneralOptimizeTimer
The value of vRtrMplsGeneralOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSPs.

When CSPF is enabled, changes in the network topology may cause…
secondsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.7
vRtrMplsGeneralFRObject
The value of vRtrMplsGeneralFRObject specifies whether fast reroute,
for LSPs using 'Facility Backup', is signalled with or without the
fast reroute object. The value of vRtrMplsGeneralFRObject is ignored
if fast rerou…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.8
vRtrMplsGeneralResignalTimer
The value of vRtrMplsGeneralResignalTimer specifies the value
for the LSP resignal timer, that is the time, in minutes, the
software will wait before attempting to resignal the LSPs.

When the resignal …
minutesUnsigned32r/w
Constraints:
range: 0-0
range: 30-10080
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.9
vRtrMplsGeneralHoldTimer
The value of vRtrMplsGeneralHoldTimer specifies the time, in
seconds, for which the ingress node holds a bit before
programming its data plane and declaring the lsp up to
the service module.

A value o…
secondsUnsigned32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.10
vRtrMplsGeneralDynamicBypass
The value of vRtrMplsGeneralDynamicBypass specifies whether
dynamic bypass tunnels are enabled.

By default, dynamic bypass tunnels are enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.11
vRtrMplsGeneralNextResignal
The value of vRtrMplsGeneralNextResignal indicates the time
remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expire.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.12
vRtrMplsGeneralOperDownReason
The value of vRtrMplsGeneralOperDownReason indicates the reason
due to which the MPLS instance is operationally down.
TmnxMplsOperDownReasonCode
Type Values:
0operUp
1adminDown
2noResources
3systemIpDown
4iomFailure
5clearDown
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.13
vRtrMplsGeneralSrlgFrr
The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk
Link Group (SRLG) constraint will be used in the computation of
FRR bypass or detour to be associated with any primary LSP path
on the system. When th…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.14
vRtrMplsGeneralSrlgFrrStrict
The value of vRtrMplsGeneralSrlgFrrStrict specifies whether
to associate the LSP with a bypass or signal a detour if a
bypass or detour satisfies all other constraints except the SRLG
constraints. When the value of …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6527.3.1.2.6.7.1.15

vRtrMplsGeneralStatTable

table
.1.3.6.1.4.1.6527.3.1.2.6.8 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsGeneralStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsGeneralStatTable' 
The vRtrMplsGeneralStatTable contains statistics for an MPLS 
protocol instance within a virtual router.
vRtrMplsGeneralStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.8.1
Each row entry represents a collection of statistics for an
instance of the MPLS protocol running within a virtual router.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
vRtrMplsGeneralStaticLspOriginate
This object counts the number of static LSPs that originate
at this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.1
vRtrMplsGeneralStaticLspTransit
This object counts the number of static LSPs that transit
through this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.2
vRtrMplsGeneralStaticLspTerminate
This object counts the number of static LSPs that terminate
at this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.3
vRtrMplsGeneralDynamicLspOriginate
This object counts the number of dynamic LSPs that originate
at this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.4
vRtrMplsGeneralDynamicLspTransit
This object counts the number of dynamic LSPs that transit
through this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.5
vRtrMplsGeneralDynamicLspTerminate
This object counts the number of dynamic LSPs that terminate
at this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.6
vRtrMplsGeneralDetourLspOriginate
This object counts the number of detour LSPs that originate
at this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.7
vRtrMplsGeneralDetourLspTransit
This object counts the number of detour LSPs that transit
through this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.8
vRtrMplsGeneralDetourLspTerminate
This object counts the number of detour LSPs that terminate
at this virtual router.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.8.1.9

vRtrMplsIfTable

table
.1.3.6.1.4.1.6527.3.1.2.6.9 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsIfTable' 
The vRtrMplsIfTable has an entry for each router interface 
configured for MPLS in the system.
vRtrMplsIfEntry row .1.3.6.1.4.1.6527.3.1.2.6.9.1
Each row entry represents an interface on this virtual router
that participates in the MPLS protocol. A row cannot be created
or deleted via SNMP SET requests. A row with default attribute
values is created by setting…
Indexes
Column Syntax OID
vRtrMplsIfAdminState
The desired administrative state for the MPLS protocol
running on this MPLS interface.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w
Type Values:
1noop
2inService
3outOfService
 .1.3.6.1.4.1.6527.3.1.2.6.9.1.1
vRtrMplsIfOperState
This variable indicates the current status of the MPLS protocol
running on this MPLS interface.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState
Type Values:
1unknown
2inService
3outOfService
4transition
 .1.3.6.1.4.1.6527.3.1.2.6.9.1.2
vRtrMplsIfAdminGroup
The value of vRtrMplsIfAdminGroup is a bit-map that identifies the
admin groups to which the interface belongs. If bit 'n' is set,
then the interface belongs to the admin group with value 'n'.

By default…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.9.1.3
vRtrMplsIfTeMetric
The value of vRtrMplsIfTeMetric specifies the traffic engineering metric
for this interface. The TE metric is exchanged in addition to the IGP
metric by the IGPs. Depending on the value configured for
vRtrMplsLspCspfT…
Unsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.6527.3.1.2.6.9.1.4

vRtrMplsIfStatTable

table
.1.3.6.1.4.1.6527.3.1.2.6.10 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsIfStatTable' 
The vRtrMplsIfStatTable has an entry for each router interface 
configured for MPLS in the system.
vRtrMplsIfStatEntry row .1.3.6.1.4.1.6527.3.1.2.6.10.1
Each row entry represents a collection of statistics for an
interface on this virtual router that participates in the
MPLS protocol.

Entries cannot be created and deleted via SNMP SET operations.
Indexes
No indexes recorded
Column Syntax OID
vRtrMplsIfTxPktCount
The total number of MPLS labeled packets transmitted from this
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.6.10.1.1
vRtrMplsIfRxPktCount
The total number of MPLS labeled packets received on this
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.6.10.1.2
vRtrMplsIfTxOctetCount
The total number of bytes in MPLS labeled packets transmitted
on this interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.6.10.1.3
vRtrMplsIfRxOctetCount
The total number of bytes in MPLS labeled packets received on
this interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6527.3.1.2.6.10.1.4

vRtrMplsTunnelARHopTable

table
.1.3.6.1.4.1.6527.3.1.2.6.11 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsTunnelARHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsTunnelARHopTable' 
The vRtrMplsTunnelARHopTable augments the mplsTunnelARHopEntry  
in the MPLS-TE-MIB.
vRtrMplsTunnelARHopEntry row .1.3.6.1.4.1.6527.3.1.2.6.11.1
A row entry in this table corresponds to a row entry in the
mplsTunnelARHopTable and adds to the information contained in
that table
Indexes
No indexes recorded
Column Syntax OID
vRtrMplsTunnelARHopProtection
If the 'localAvailable' bit is set, it indicates that the link
downstream of this node has been protected by means of a local
repair mechanism. This mechanism can be either the one-to-one
backup method or the facility…
Bits
Enumerated Values:
0localAvailable
1localInUse
2bandwidthProtected
3nodeProtected
 .1.3.6.1.4.1.6527.3.1.2.6.11.1.1
vRtrMplsTunnelARHopRecordLabel
If label recording is enabled, vRtrMplsTunnelARHopRecordLabel
specifies the label that is advertised to the previous hop in
the hop list. If label recording is disabled,
vRtrMplsTunnelARHopRecordLabel will have a val…
MPLS-LSR-MIBMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.11.1.2
vRtrMplsTunnelARHopRouterId
vRtrMplsTunnelARHopRouterId specifies the router ID of the node
corresponding to this hop.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.6.11.1.3

vRtrMplsTunnelCHopTable

table
.1.3.6.1.4.1.6527.3.1.2.6.12 · 1 row entry · 10 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsTunnelCHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsTunnelCHopTable' 
The vRtrMplsTunnelCHopTable is used to hold the CSPF
path for a detour LSP. Each entry indicates a single
hop.
          
Primary index is the vRtrMplsTunnelCHopListIndex which associates 
multiple entries (hops) in the vRtrMplsTunnelCHopTable to a single 
mplsTunnelEntry specified in the mplsTunnelTable.
          
The first row in the table is the first hop after the
origination point of the tunnel.
vRtrMplsTunnelCHopEntry row .1.3.6.1.4.1.6527.3.1.2.6.12.1
An entry in this table represents a CSPF tunnel hop.
Entries are created and deleted by the system.
Indexes
Column Syntax OID
vRtrMplsTunnelCHopListIndex
Primary index into this table identifying a particular explicit route
object.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.1
vRtrMplsTunnelCHopIndex
Secondary index into this table identifying a particular hop.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.2
vRtrMplsTunnelCHopAddrType
Denotes the address type of this tunnel hop.
Enumeration
Enumerated Values:
1ipV4
2ipV6
3asNumber
4lspid
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.3
vRtrMplsTunnelCHopIpv4Addr
If vRtrMplsTunnelCHopAddrType is set to ipV4(1), then this value will
contain the IPv4 address of this hop. This object is otherwise
insignificant and should contain a value of 0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.4
vRtrMplsTunnelCHopIpv4PrefixLen
If vRtrMplsTunnelCHopAddrType is ipV4(1), then the prefix length for
this hop's IPv4 address is contained herein. This object is otherwise
insignificant and should contain a value of 0.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.5
vRtrMplsTunnelCHopIpv6Addr
If the vRtrMplsTunnelCHopAddrType is set to ipV6(2), then this
variable contains the IPv6 address of this hop. This object is
otherwise insignificant and should contain a value of 0.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.6
vRtrMplsTunnelCHopIpv6PrefixLen
If vRtrMplsTunnelCHopAddrType is set to ipV6(2), this value will
contain the prefix length for this hop's IPv6 address. This object is
otherwise insignificant and should contain a value of 0.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.7
vRtrMplsTunnelCHopAsNumber
If vRtrMplsTunnelCHopAddrType is set to asNumber(3), then this value
will contain the AS number of this hop. This object is otherwise
insignificant and should contain a value of 0 to indicate this fact.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.8
vRtrMplsTunnelCHopLspId
If vRtrMplsTunnelCHopAddrType is set to lspid(4), then this value will
contain the LSPID of a tunnel of this hop. The present tunnel being
configured is tunneled through this hop (using label stacking). This
object is…
MPLS-LSR-MIBMplsLSPID
Type Constraints:
range: 0..31
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.9
vRtrMplsTunnelCHopStrictOrLoose
Denotes whether this tunnel hop is routed in a strict or loose
fashion.
Enumeration
Enumerated Values:
1strict
2loose
 .1.3.6.1.4.1.6527.3.1.2.6.12.1.10

vRtrMplsAdminGroupTable

table
.1.3.6.1.4.1.6527.3.1.2.6.13 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsAdminGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsAdminGroupTable' 
The vRtrMplsAdminGroupTable has an entry for each administrative
group configured for the virtual router in the system. 
          
Administrative groups are resource constructs that define a link
color or resource class. They provide the ability to classify 
network resources (links) into groups or colors based on zones, 
geographic location, link location, etc. By doing so, network
administrators are able to do more granular traffic engineering
of LSPs.
vRtrMplsAdminGroupEntry row .1.3.6.1.4.1.6527.3.1.2.6.13.1
Each row entry in the vRtrMplsAdminGroupTable represents an
administrative group which is simply a mapping between a group
name (an ASCII string) and a group value (a number in the range
0 to 31).

Entries …
Indexes
Column Syntax OID
vRtrMplsAdminGroupName
The value of vRtrMplsAdminGroupName uniquely identifies the
name of the administrative group within a virtual router
instance.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.6.13.1.1
vRtrMplsAdminGroupRowStatus
vRtrMplsAdminGroupRowStatus is used to create, delete or
control entries in the vRtrMplsAdminGroupTable. To create
a row entry, the row status should be set to 'createAndWait'.
Before the row can be placed into the '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.6.13.1.2
vRtrMplsAdminGroupValue
The value of vRtrMplsAdminGroupValue specifies the group value
associated with this administrative group. This value is unique
within a virtual router instance.

A value of -1 indicates that the group val…
Integer32r/w
Constraints:
range: -1-31
 .1.3.6.1.4.1.6527.3.1.2.6.13.1.3

vRtrMplsFSGroupTable

table
.1.3.6.1.4.1.6527.3.1.2.6.14 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsFSGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsFSGroupTable' 
The vRtrMplsFSGroupTable has an entry for each group that is 
a part of the fate sharing database configured for the virtual 
router in the system. 
          
A fate sharing group is used to define a group of links and 
nodes in the network that share common risk attributes. To
minimize a single point of failure, backup paths can be created
that not only avoid the nodes and links of the primary path but
also any other nodes and links that share risk with the nodes 
and links of the primary path.
vRtrMplsFSGroupEntry row .1.3.6.1.4.1.6527.3.1.2.6.14.1
Each row entry in the vRtrMplsFSGroupTable represents a
fate sharing group which is a database of nodes and links
that share common risk attributes.

Entries in this table are created and deleted via SNMP …
Indexes
Column Syntax OID
vRtrMplsFSGroupName
The value of vRtrMplsFSGroupName uniquely identifies the
name of the fate sharing group within a virtual router
instance.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.6.14.1.1
vRtrMplsFSGroupRowStatus
vRtrMplsFSGroupRowStatus is used to create, delete or
control entries in the vRtrMplsFSGroupTable. To create
a row entry, the row status should be set to 'createAndGo'.
To delete a row entry, the row status should be…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.6.14.1.2
vRtrMplsFSGroupCost
The value of vRtrMplsFSGroupCost specifies the cost assigned
to the fate sharing group. This cost is applied to all nodes
and links that are part of this group and used for CSPF
calculations. The higher the cost of t…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6527.3.1.2.6.14.1.3

vRtrMplsFSGroupParamsTable

table
.1.3.6.1.4.1.6527.3.1.2.6.15 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsFSGroupParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsFSGroupParamsTable' 
The vRtrMplsFSGroupParamsTable has an entry for each node
or link that is part of a fate sharing group on this virtual 
router.
vRtrMplsFSGroupParamsEntry row .1.3.6.1.4.1.6527.3.1.2.6.15.1
Each row entry in the vRtrMplsFSGroupParamsTable represents
either a node or a link that is a part of a fate sharing group
defined in the vRtrMplsFSGroupTable.

Entries in this table are created and deleted …
Indexes
Column Syntax OID
vRtrMplsFSGroupParamsFromAddr
The value of vRtrMplsFSGroupParamsFromAddr along with the
value of vRtrMplsFSGroupParamsToAddr uniquely identifies a
link or node within a fate sharing group.

This value must be non-zero for all row en…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.6.15.1.1
vRtrMplsFSGroupParamsToAddr
The value of vRtrMplsFSGroupParamsToAddr along with the
value of vRtrMplsFSGroupParamsFromAddr uniquely identifies
a link or node within a fate sharing group.

This value must be 0 for row entries that …
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6527.3.1.2.6.15.1.2
vRtrMplsFSGroupParamsRowStatus
vRtrMplsFSGroupParamsRowStatus is used to create, delete or
control entries in the vRtrMplsFSGroupParamsTable. To create
a row entry, the row status should be set to 'createAndGo'.
To delete a row entry, the row stat…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.6.15.1.3

vRtrMplsLabelRangeTable

table
.1.3.6.1.4.1.6527.3.1.2.6.17 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsLabelRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsLabelRangeTable' 
The vRtrMplsLabelRangeTable has an entry for each type of
label, the minimum and maximum value in the label range and 
information on total available and aging labels in each range.
          
This is a read-only table.
vRtrMplsLabelRangeEntry row .1.3.6.1.4.1.6527.3.1.2.6.17.1
Each row entry in the vRtrMplsLabelRangeTable represents
a type of label. Each entry contains the label range used
by that label type and the number of aging and allocated
labels in the range.
Indexes
Column Syntax OID
vRtrMplsLabelType
The value of vRtrMplsLabelType specifies the type of
label and is the index for this table.
Enumeration
Enumerated Values:
1staticLsp
2staticSvc
3dynamic
 .1.3.6.1.4.1.6527.3.1.2.6.17.1.1
vRtrMplsLabelRangeMin
The value of vRtrMplsLabelRangeMin specifies the minimum
label value in the range for a particular label type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.17.1.2
vRtrMplsLabelRangeMax
The value of vRtrMplsLabelRangeMax specifies the maximum
label value in the range for a particular label type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.17.1.3
vRtrMplsLabelRangeAging
The value of vRtrMplsLabelRangeAging represents the
number of labels that are currently allocated and aging.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.17.1.4
vRtrMplsLabelRangeAvailable
The value of vRtrMplsLabelRangeAvailable represents the
number of labels that are currently available for each
label type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.17.1.5

vRtrMplsStaticLSPLabelTable

table
.1.3.6.1.4.1.6527.3.1.2.6.18 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsStaticLSPLabelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsStaticLSPLabelTable' 
The vRtrMplsStaticLSPLabelTable has an entry for each allocated 
label that is part of the static LSP label range. This is a 
read-only table.
vRtrMplsStaticLSPLabelEntry row .1.3.6.1.4.1.6527.3.1.2.6.18.1
Each row entry in the vRtrMplsStaticLSPLabelTable represents
a label of type static LSP that is currently allocated.
The entry includes information about the current owner
for that label.
Indexes
Column Syntax OID
vRtrMplsStaticLSPLabel
The value of vRtrMplsStaticLSPLabel specifies the label
value.
Unsigned32
Constraints:
range: 32-1023
 .1.3.6.1.4.1.6527.3.1.2.6.18.1.1
vRtrMplsStaticLSPLabelOwner
The value of vRtrMplsStaticLSPLabelOwner specifies the owner
for the label value vRtrMplsStaticLSPLabel.
TmnxMplsLabelOwner
Type Values:
0none
1rsvp
2tldp
3ildp
4svcmgr
5bgp
6mirror
7static
8vprn
 .1.3.6.1.4.1.6527.3.1.2.6.18.1.2

vRtrMplsStaticSvcLabelTable

table
.1.3.6.1.4.1.6527.3.1.2.6.19 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsStaticSvcLabelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsStaticSvcLabelTable' 
The vRtrMplsStaticSvcLabelTable has an entry for each allocated 
label that is part of the static service label range. This 
is a read-only table.
vRtrMplsStaticSvcLabelEntry row .1.3.6.1.4.1.6527.3.1.2.6.19.1
Each row entry in the vRtrMplsStaticSvcLabelTable represents
a label of type static-svc that is currently allocated.
The entry includes information about the current owner
for that label.
Indexes
Column Syntax OID
vRtrMplsStaticSvcLabel
The value of vRtrMplsStaticSvcLabel specifies the label
value.
Unsigned32
Constraints:
range: 2048-18431
 .1.3.6.1.4.1.6527.3.1.2.6.19.1.1
vRtrMplsStaticSvcLabelOwner
The value of vRtrMplsStaticSvcLabelOwner specifies
the owner for the label value vRtrMplsStaticSvcLabel.
TmnxMplsLabelOwner
Type Values:
0none
1rsvp
2tldp
3ildp
4svcmgr
5bgp
6mirror
7static
8vprn
 .1.3.6.1.4.1.6527.3.1.2.6.19.1.2

vRtrMplsSrlgGrpTable

table
.1.3.6.1.4.1.6527.3.1.2.6.21 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsSrlgGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsSrlgGrpTable' 
The vRtrMplsSrlgGrpTable has an entry for each Shared Risk Link 
Groups (SRLG) group configured for MPLS in the system.
vRtrMplsSrlgGrpEntry row .1.3.6.1.4.1.6527.3.1.2.6.21.1
Each row entry represents a SRLG group on this virtual router
that participates in the MPLS protocol. A row can be created
or deleted via SNMP SET requests.
Indexes
Column Syntax OID
vRtrMplsSrlgGrpName
The value of vRtrMplsSrlgGrpName indicates the SRLG group name.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.6.21.1.1
vRtrMplsSrlgGrpRowStatus
vRtrMplsSrlgGrpRowStatus is used to create, delete or
control entries in the vRtrMplsSrlgGrpTable. A value must
also be set for vRtrMplsSrlgGrpValue before the row entry can
transition to the 'active' state.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.6.21.1.2
vRtrMplsSrlgGrpLastChanged
The value of vRtrMplsSrlgGrpLastChanged indicates the timestamp of
last change to this row in vRtrMplsSrlgGrpTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.6.21.1.3
vRtrMplsSrlgGrpValue
The value of vRtrMplsSrlgGrpValue specifies the group value
associated with vRtrMplsSrlgGrpName. This value is unique
within a virtual router instance.

At the time of row creation, a value for vRtrMpls…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6527.3.1.2.6.21.1.4

vRtrMplsIfSrlgGrpTable

table
.1.3.6.1.4.1.6527.3.1.2.6.23 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk vRtrMplsIfSrlgGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-MPLS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-MPLS-MIB::vRtrMplsIfSrlgGrpTable' 
The vRtrMplsIfSrlgGrpTable has an entry for each Shared Risk 
Link Group (SRLG) groups associated with a router interface 
configured for MPLS in the system.
vRtrMplsIfSrlgGrpEntry row .1.3.6.1.4.1.6527.3.1.2.6.23.1
Each row entry represents an SRLG group associated with a interface
on this virtual router that participates in the MPLS protocol.

A row can be created or deleted via SNMP SET requests.
Indexes
Column Syntax OID
vRtrMplsIfSrlgGrpName
The value of vRtrMplsIfSrlgGrpName indicates the SRLG group name.
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.6527.3.1.2.6.23.1.1
vRtrMplsIfSrlgGrpRowStatus
vRtrMplsIfSrlgGrpRowStatus is used to create, delete or
control entries in the vRtrMplsIfSrlgGrpTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6527.3.1.2.6.23.1.2
vRtrMplsIfSrlgGrpLastChanged
The value of vRtrMplsIfSrlgGrpLastChanged indicates the timestamp
of last change to this row in vRtrMplsIfSrlgGrpTable.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6527.3.1.2.6.23.1.3