ALCATEL-ENT1-TIMETRA-LDP-MIB Table View

vRtrLdpGeneralTable has an entry for each virtual router 
in the system capable of supporting an instance of the
Label Distribution Protocol (LDP).

vRtrLdpGeneralEntry row .1.3.6.1.4.1.6527.3.1.2.8.1.1

Each row entry represents an instance of the Label Distribution
Protocol (LDP) for a virtual router in the system.

An entry in this table is created by the agent when vRtrLdpStatus
in the vRtrConfTable is …

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID

Column	Syntax	OID
vRtrLdpGenLastChange The value of vRtrLdpGenLastChange specifies the sysUpTime when this row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.8.1.1.1
vRtrLdpGenAdminState The value of vRtrLdpGenAdminState specifies the desired administrative state for this LDP instance.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.8.1.1.2
vRtrLdpGenOperState The value of vRtrLdpGenOperState specifies the current operational state of this LDP instance.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.8.1.1.3
vRtrLdpGenLdpLsrId The value of vRtrLdpGenLdpLsrId is the Label Switch Router (LSR) identifier which is used as the first 4 bytes or the Router Id component of the Label Distribution Protocol (LDP) identifier.	MPLS-LDP-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.1.1.4
vRtrLdpGenProtocolVersion The value of vRtrLdpGenProtocolVersion specifies the version of the LDP protocol instance. A value of zero (0) indicates that the version of the protocol is unknown.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.1.1.5
vRtrLdpGenDeaggregateFec When vRtrLdpGenDeaggregateFec has a value of 'false', LDP aggregates multiple prefixes into a single Forwarding Equivalence Class (FEC) and advertises a single label for the FEC. When the value is 'true', LDP deaggrega…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.8.1.1.6
vRtrLdpGenKeepAliveFactor The value of vRtrLdpGenKeepAliveFactor specifies the value by which the keepalive timeout (vRtrLdpGenKeepAliveTimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepal…	TmnxLdpKeepAliveFactorr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.6527.3.1.2.8.1.1.7
vRtrLdpGenKeepAliveTimeout The value of vRtrLdpGenKeepAliveTimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. …	secondsTmnxLdpKeepAliveTimeoutr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.1.1.8
vRtrLdpGenHelloFactor The value of vRtrLdpGenHelloFactor specifies the value by which the hello timeout (vRtrLdpGenHelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP u…	TmnxLdpHelloFactorr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.6527.3.1.2.8.1.1.9
vRtrLdpGenHelloTimeout The value of vRtrLdpGenHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system an…	secondsTmnxLdpHelloTimeoutr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.1.1.10
vRtrLdpGenRoutePreference The value of vRtrLdpGenRoutePreference specifies the route preference assigned to LDP routes. When multiple routes are available to a destination, the route with the lowest preference will be used. Thi…	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.6527.3.1.2.8.1.1.11
vRtrLdpGenControlMode The value of vRtrLdpGenControlMode specifies the mode used for distributing labels in response to label binding requests. When vRtrLdpGenControlMode has a value of 'ordered', label bindings are not…	Enumeration Enumerated Values: 1 ordered 2 independent	.1.3.6.1.4.1.6527.3.1.2.8.1.1.12
vRtrLdpGenDistMethod The value of vRtrLdpGenDistMethod specifies the label distribution method used. When vRtrLdpGenDistMethod has a value of 'downstreamOnDemand', label bindings are distributed to the upstream LSR, for e…	TmnxLdpLabelDistMethod Type Values: 1 downstreamOnDemand 2 downstreamUnsolicited	.1.3.6.1.4.1.6527.3.1.2.8.1.1.13
vRtrLdpGenRetentionMode The value of vRtrLdpGenRetentionMode specifies the label retention mode used. If the value of this object is 'conservative', then advertized label mappings are retained only if they will be used to f…	Enumeration Enumerated Values: 1 conservative 2 liberal	.1.3.6.1.4.1.6527.3.1.2.8.1.1.14
vRtrLdpGenTransportAddrType The value of vRtrLdpGenTransportAddrType specifies the source of the transport address to be used when setting up the LDP TCP sessions. The transport address can be configured globally (applied to all interfaces) or pe…	Enumerationr/w Enumerated Values: 1 interface 2 system	.1.3.6.1.4.1.6527.3.1.2.8.1.1.15
vRtrLdpGenPropagatePolicy The value of vRtrLdpGenPropagatePolicy determines whether the LSR should generate FECs and which FECs it should generate. When the value of this object is 'system', LDP will distribute label bindings on…	TmnxLdpFECPolicyr/w Type Values: 1 system 2 interface 3 all 4 none	.1.3.6.1.4.1.6527.3.1.2.8.1.1.16
vRtrLdpGenLoopDetectCapable The value of vRtrLdpGenLoopDetectCapable indicate whether this LSR supports loop detection and if so, what type of loop detection is supported. When the value is 'none' loop detection is not supported on…	Enumerationr/w Enumerated Values: 1 none 2 other 3 hopCount 4 pathVector 5 hopCountAndPathVector	.1.3.6.1.4.1.6527.3.1.2.8.1.1.17
vRtrLdpGenHopLimit The value of vRtrLdpGenHopLimit specifies the maximum allowable value for the hop count. The value of this object is valid and used only if vRtrLdpGenLoopDetectCapable has a value of either 'hopCount' or 'hopCountAndPa…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.8.1.1.18
vRtrLdpGenPathVectorLimit The value of vRtrLdpGenPathVectorLimit specifies the maximum allowable value for the path vector count. The value of this object is valid and used only if vRtrLdpGenLoopDetectCapable has a value of either 'pathVector' …	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.8.1.1.19
vRtrLdpGenBackoffTime The value of vRtrLdpGenBackoffTime specifies the initial value for the backoff interval. The backoff interval is the time, in seconds, that LDP waits after an LDP session setup has failed before it att…	secondsUnsigned32r/w Constraints: range: 1-2592000	.1.3.6.1.4.1.6527.3.1.2.8.1.1.20
vRtrLdpGenMaxBackoffTime The value of vRtrLdpGenMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router wai…	secondsTmnxLdpBackoffTimer/w Type Constraints: range: 0..2592000	.1.3.6.1.4.1.6527.3.1.2.8.1.1.21
vRtrLdpGenTargKeepAliveFactor The value of vRtrLdpGenTargKeepAliveFactor specifies the value by which the keepalive timeout (vRtrLdpGenTargKeepAliveTimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LD…	TmnxLdpKeepAliveFactorr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.6527.3.1.2.8.1.1.22
vRtrLdpGenTargKeepAliveTimeout The value of vRtrLdpGenTargKeepAliveTimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn dow…	secondsTmnxLdpKeepAliveTimeoutr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.1.1.23
vRtrLdpGenTargHelloFactor The value of vRtrLdpGenTargHelloFactor specifies the value by which the hello timeout (vRtrLdpGenTargHelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello message…	TmnxLdpHelloFactorr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.6527.3.1.2.8.1.1.24
vRtrLdpGenTargHelloTimeout The value of vRtrLdpGenTargHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the syste…	secondsTmnxLdpHelloTimeoutr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.1.1.25
vRtrLdpGenTargPassiveMode The value of vRtrLdpGenTargPassiveMode specifies the mode used for setting up LDP sessions. When it has a value of 'true', LDP responds only when it gets a connect request from a peer and will not attempt to actively c…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.8.1.1.26
vRtrLdpGenTargetedSessions The value of vRtrLdpGenTargetedSessions specifies whether or not targeted sessions are allowed. Targeted sessions are LDP sessions between indirectly connected peers. The discovery messages for an indirect LDP session…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.8.1.1.27
vRtrLdpGenCreateTime The value of vRtrLdpGenCreateTime specifies the sysUpTime when this LDP instance was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.8.1.1.28
vRtrLdpGenUpTime The value of vRtrLdpGenUpTime specifies the time, in hundreds of seconds, that the LDP instance has been operationally up.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6527.3.1.2.8.1.1.29
vRtrLdpGenImportPolicy1 The value of vRtrLdpGenImportPolicy1 specifies the first import policy used to filter LDP label bindings received from LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.30
vRtrLdpGenImportPolicy2 The value of vRtrLdpGenImportPolicy2 specifies the second import policy used to filter LDP label bindings received from LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.31
vRtrLdpGenImportPolicy3 The value of vRtrLdpGenImportPolicy3 specifies the third import policy used to filter LDP label bindings received from LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.32
vRtrLdpGenImportPolicy4 The value of vRtrLdpGenImportPolicy4 specifies the fourth import policy used to filter LDP label bindings received from LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.33
vRtrLdpGenImportPolicy5 The value of vRtrLdpGenImportPolicy5 specifies the fifth import policy used to filter LDP label bindings received from LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.34
vRtrLdpGenExportPolicy1 The value of vRtrLdpGenExportPolicy1 specifies the first export policy used to filter LDP label bindings advertised to LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.35
vRtrLdpGenExportPolicy2 The value of vRtrLdpGenExportPolicy2 specifies the second export policy used to filter LDP label bindings advertised to LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.36
vRtrLdpGenExportPolicy3 The value of vRtrLdpGenExportPolicy3 specifies the third export policy used to filter LDP label bindings advertised to LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.37
vRtrLdpGenExportPolicy4 The value of vRtrLdpGenExportPolicy4 specifies the fourth export policy used to filter LDP label bindings advertised to LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.38
vRtrLdpGenExportPolicy5 The value of vRtrLdpGenExportPolicy5 specifies the fifth export policy used to filter LDP label bindings advertised to LDP peers.	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.1.1.39
vRtrLdpGenTunnelDownDampTime The value of vRtrLdpGenTunnelDownDampTime specifies the time interval, in seconds, that LDP waits before posting a tunnel down event to the Route Table Manager. If a tunnel up event is generated before the damping int…	secondsUnsigned32r/w Constraints: range: 0-20	.1.3.6.1.4.1.6527.3.1.2.8.1.1.40
vRtrLdpGenOperDownReason The value of vRtrLdpGenOperDownReason specifies the reason that the LDP instance is operationally down.	TmnxLdpGenOperDownReasonCode Type Values: 0 operUp 1 adminDown 2 noListenSocket 3 noDiscoverySocket 4 noRtm 5 noTtm 6 iomFailure 7 recvFailure 8 clearDown 9 noResources 10 systemIpDown	.1.3.6.1.4.1.6527.3.1.2.8.1.1.41
vRtrLdpGenTrustListobsolete The value of vRtrLdpGenTrustList specifies the IP filter ID used to verify trusted T-LDP peers. The IP filter specified by this object should contain a list of src-ip matches. The value '0' is not a valid IP filter ID,…	ALCATEL-ENT1-TIMETRA-FILTER-MIBTFilterIDr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.8.1.1.42
vRtrLdpGenGracefulRestart The value of vRtrLdpGenGracefulRestart specifies whether graceful restart helper is allowed. When this object has a value of 'true', graceful restart helper is enabled. When its value is 'false', graceful restart he…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.8.1.1.43
vRtrLdpGenGRNbrLiveTime The value of vRtrLdpGenGRNbrLiveTime specifies the value for neighbor liveness timer. The amount of time the Label Switching Router (LSR) keeps its stale label-FEC bindings is set to the lesser of the FT Reconnect Ti…	secondsUnsigned32r/w Constraints: range: 5-300	.1.3.6.1.4.1.6527.3.1.2.8.1.1.44
vRtrLdpGenGRMaxRecoveryTime The value of vRtrLdpGenGRMaxRecoveryTime specifies the local maximum recovery time. If the Label Switching Router (LSR) determines that the neighbor was able to preserve its MPLS forwarding state (as w…	secondsUnsigned32r/w Constraints: range: 15-1800	.1.3.6.1.4.1.6527.3.1.2.8.1.1.45

vRtrLdpStatsTable is a read-only table. The purpose of this table
is to keep statistical information about an LDP Instance.
          
Use of AUGMENTS clause implies a one-to-one dependent
relationship between the base table, vRtrLdpGeneralTable,
and the augmenting table, vRtrLdpStatsTable. This in
effect extends the vRtrLdpGeneralTable with additional
columns.  Creation or deletion of a row in the 
vRtrLdpGeneralTable results in the same fate for the row 
in the vRtrLdpStatsTable.

vRtrLdpStatsEntry row .1.3.6.1.4.1.6527.3.1.2.8.2.1

A row in this table represents statistical information about
an LDP instance.

Indexes

No indexes recorded

Column	Syntax	OID
vRtrLdpStatsOperDownEvents The value of vRtrLdpStatsOperDownEvents specifies the number of times the LDP instance has gone operationally down since the instance was created.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.1
vRtrLdpStatsActiveSessions The value of vRtrLdpStatsActiveSessions specifies the number of active sessions (i.e. session in some form of creation) associated with the LDP instance.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.2
vRtrLdpStatsActiveAdjacencies The value of vRtrLdpStatsActiveAdjacencies specifies the number of active adjacencies (i.e. established sessions) associated with the LDP instance.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.3
vRtrLdpStatsActiveInterfaces The value of vRtrLdpStatsActiveInterfaces specifies the number of active (i.e. operationally up) interfaces associated with the LDP instance.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.4
vRtrLdpStatsInactiveInterfaces The value of vRtrLdpStatsInactiveInterfaces specifies the number of inactive (i.e. operationally down) interfaces associated with the LDP instance.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.5
vRtrLdpStatsActiveTargSessions The value of vRtrLdpStatsActiveTargSessions specifies the number of active (i.e. operationally up) targeted sessions associated with the LDP instance.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.6
vRtrLdpStatsInactiveTargSessions The value of vRtrLdpStatsInactiveTargSessions specifies the number of inactive (i.e. operationally down) targeted sessions associated with the LDP instance.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.7
vRtrLdpStatsAddrFECRecv The value of vRtrLdpStatsAddrFECRecv specifies the number of Address FECs received by the LDP instance from its neighbors.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.8
vRtrLdpStatsAddrFECSent The value of vRtrLdpStatsAddrFECSent specifies the number of Address FECs sent by the LDP instance to its neighbors.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.9
vRtrLdpStatsSvcFECRecv The value of vRtrLdpStatsSvcFECRecv specifies the number of Service FECs received by the LDP instance from its neighbors.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.10
vRtrLdpStatsSvcFECSent The value of vRtrLdpStatsSvcFECSent specifies the number of Service FECs sent by the LDP instance to its neighbors.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.11
vRtrLdpStatsAttemptedSessions The value of vRtrLdpStatsAttemptedSessions specifies the total number of attempted sessions for this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.12
vRtrLdpStatsSessRejNoHelloErrors The value of vRtrLdpStatsSessRejNoHelloErrors gives the total number of Session Rejected/No Hello Error Notification Messages sent or received by this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.13
vRtrLdpStatsSessRejAdvErrors The value of vRtrLdpStatsSessRejAdvErrors gives the total number of Session Rejected/Parameters Advertisement Mode Error Notification Messages sent or received by this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.14
vRtrLdpStatsSessRejMaxPduErrors The value of vRtrLdpStatsSessRejMaxPduErrors gives the total number of Session Rejected/Parameters Max Pdu Length Error Notification Messages sent or received by this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.15
vRtrLdpStatsSessRejLabelRangeErrors The value of vRtrLdpStatsSessRejLabelRangeErrors gives the total number of Session Rejected/Parameters Label Range Error Notification Messages sent or received by this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.16
vRtrLdpStatsBadLdpIdentifierErrors The value of vRtrLdpStatsBadLdpIdentifierErrors gives the number of Bad LDP Identifier Fatal Errors detected for sessions associated with this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.17
vRtrLdpStatsBadPduLengthErrors The value of vRtrLdpStatsBadPduLengthErrors gives the number of Bad Pdu Length Fatal Errors detected for sessions associated with this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.18
vRtrLdpStatsBadMessageLengthErrors The value of vRtrLdpStatsBadMessageLengthErrors gives the number of Bad Message Length Fatal Errors detected for sessions associated with this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.19
vRtrLdpStatsBadTlvLengthErrors The value of vRtrLdpStatsBadTlvLengthErrors gives the number of Bad TLV Length Fatal Errors detected for sessions associated with this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.20
vRtrLdpStatsMalformedTlvValueErrors The value of vRtrLdpStatsMalformedTlvValueErrors gives the number of Malformed TLV Value Fatal Errors detected for sessions associated with this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.21
vRtrLdpStatsKeepAliveExpiredErrors The value of vRtrLdpStatsKeepAliveExpiredErrors gives the number of Session Keep Alive Timer Expired Errors detected for sessions associated with this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.22
vRtrLdpStatsShutdownNotifRecv The value of vRtrLdpStatsShutdownNotifRecv gives the number of Shutdown Notifications received related to sessions associated with this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.23
vRtrLdpStatsShutdownNotifSent The value of vRtrLdpStatsShutdownNotifSent gives the number of Shutdown Notifications sent related to sessions associated with this LDP instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.2.1.24

vRtrLdpPolicyTable has an entry for each policy used by
the LDP protocol instance running on the virtual router.
          
This table is obsoleted in release 2.1.

vRtrLdpPolicyEntry row .1.3.6.1.4.1.6527.3.1.2.8.3.1

Each row entry represents a policy used by the LDP protocol
instance.

Entries can be created and deleted via SNMP SET operations
to vRtrLdpPolicyRowStatus.

This entry is obsoleted in release 2…

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpPolicyType vRtrLdpPolicyIndex

Column	Syntax	OID
vRtrLdpPolicyTypeobsolete The value of vRtrLdpPolicyType indicates the type of policy specified in this row entry. When vRtrLdpPolicyType has a value of 'import' this row entry represents the policy filter to be applied to the lab…	Enumeration Enumerated Values: 1 import 2 export 3 ingress 4 egress	.1.3.6.1.4.1.6527.3.1.2.8.3.1.1
vRtrLdpPolicyIndexobsolete vRtrLdpPolicyIndex is used to control the order that the LDP policies are applied. If multiple entries exist in this table with the same vRtrID and vRtrLdpPolicyType indexes, they are evaluated in ascending numeric o…	Unsigned32 Constraints: range: 1-5	.1.3.6.1.4.1.6527.3.1.2.8.3.1.2
vRtrLdpPolicyRowStatusobsolete vRtrLdpPolicyRowStatus controls the creation and deletion of rows in the vRtrLdpPolicyTable. This object is obsoleted in release 2.1.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.8.3.1.3
vRtrLdpPolicyNameobsolete The value of vRtrLdpPolicyName is the name of the policy filter to be used. If this object has the value of the empty string, ''H, there is no policy specified at this level. This object is obsoleted in …	ALCATEL-ENT1-TIMETRA-TC-MIBTPolicyStatementNameOrEmptyr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.6527.3.1.2.8.3.1.4

vRtrLdpIfTable provides an entry for each virtual router
interface or targeted peer configured to be used with the Label
Distribution Protocol (LDP).

vRtrLdpIfEntry row .1.3.6.1.4.1.6527.3.1.2.8.5.1

Each row entry represents an interface on this virtual router
that participates in the LDP protocol.

Row entries can be created or deleted via SNMP SET requests.
A row with default attribute values is cr…

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpIfIndex vRtrLdpPeerAddress

Column	Syntax	OID
vRtrLdpIfIndex vRtrLdpIfIndex is an index for the row entry and is used mutually exclusively with the vRtrLdpPeerAddress field. If the vRtrLdpPeerAddress field is 0.0.0.0, then vRtrLdpIfIndex is the index for the interface on the vi…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.5.1.1
vRtrLdpPeerAddress vRtrLdpPeerAddress is an index for the row entry and is used mutually exclusively with the vRtrLdpIfIndex field. If the vRtrLdpIfIndex field is 0, then the vRtrLdpPeerAddress is the IP address of the targeted peer an…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.5.1.2
vRtrLdpIfRowStatus vRtrLdpIfRowStatus is used to control the creation and deletion of rows in the vRtrLdpIfTable. A row can be created by setting vRtrLdpIfRowStatus to 'createAndGo'. The agent should assign the default att…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6527.3.1.2.8.5.1.3
vRtrLdpIfLastChange The value of vRtrLdpIfLastChange specifies the sysUpTime when this row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.8.5.1.4
vRtrLdpIfAdminState The value of vRtrLdpIfAdminState indicates the desired administrative state for LDP on this interface or targeted peer.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w Type Values: 1 noop 2 inService 3 outOfService	.1.3.6.1.4.1.6527.3.1.2.8.5.1.5
vRtrLdpIfOperState The value of vRtrLdpIfOperState specifies the current operational state of LDP on this interface or targeted peer.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState Type Values: 1 unknown 2 inService 3 outOfService 4 transition	.1.3.6.1.4.1.6527.3.1.2.8.5.1.6
vRtrLdpIfInheritance Some writable object in this row that can be configured to inherit its value from its corresponding object in the vRtrLdpGeneralTable for LDP interfaces or from the corresponding object in the vRtrLdpIfTable for target…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.5.1.7
vRtrLdpIfKeepAliveFactor The value of vRtrLdpIfKeepAliveFactor specifies the value by which the keepalive timeout (vRtrLdpIfKeepAliveTimeout) should be divided to give the keepalive time i.e. the time interval, in seconds, between LDP keepali…	TmnxLdpKeepAliveFactorr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.6527.3.1.2.8.5.1.8
vRtrLdpIfKeepAliveTimeout The value of vRtrLdpIfKeepAliveTimeout specifies the time interval, in seconds, that LDP waits before tearing down a session. If no LDP messages are exchanged during this time interval, the LDP session is torn down. Ge…	secondsTmnxLdpKeepAliveTimeoutr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.5.1.9
vRtrLdpIfHelloFactor The value of vRtrLdpIfHelloFactor specifies the value by which the hello timeout (vRtrLdpIfHelloTimeout) should be divided to give the hello time i.e. the time interval, in seconds, between LDP Hello messages. LDP use…	secondsTmnxLdpHelloFactorr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.6527.3.1.2.8.5.1.10
vRtrLdpIfHelloTimeout The value of vRtrLdpIfHelloTimeout specifies the hello time also known as hold time. It is the time interval, in seconds, that LDP waits before declaring a neighbor to be down. Hello timeout is local to the system and …	secondsTmnxLdpHelloTimeoutr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.5.1.11
vRtrLdpIfBackoffTime The value of vRtrLdpIfBackoffTime specifies the initial value for the backoff interval. The backoff interval is the time, in seconds, that LDP waits after an LDP session setup has failed before it attem…	secondsUnsigned32r/w Constraints: range: 1-2592000	.1.3.6.1.4.1.6527.3.1.2.8.5.1.12
vRtrLdpIfMaxBackoffTime The value of vRtrLdpIfMaxBackoffTime specifies the maximum value for the backoff interval. For each successive failure of the LDP session startup, the backoff interval (the time for which the router wait…	secondsTmnxLdpBackoffTimer/w Type Constraints: range: 0..2592000	.1.3.6.1.4.1.6527.3.1.2.8.5.1.13
vRtrLdpIfTransportAddrType The value of vRtrLdpIfTransportAddrType specifies the source of the transport address to be used when setting up the LDP TCP sessions. This value is meaningful only in case of LDP interfaces and not for targeted peers. …	Enumerationr/w Enumerated Values: 1 interface 2 system	.1.3.6.1.4.1.6527.3.1.2.8.5.1.14
vRtrLdpIfPassiveMode The value of vRtrLdpIfPassiveMode specifies the mode used for setting up LDP sessions. This object is meaningful only in case of LDP targeted peers and not for interfaces. When it has a value of 'true', LDP responds on…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.8.5.1.15
vRtrLdpIfAutoCreate The value of vRtrLdpIfAutoCreate specifies whether or not the row entry represents a targeted peer that was automatically created through Service Manager. For an LDP interface, this value is always false.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.8.5.1.16
vRtrLdpIfOperDownReason The value of vRtrLdpIfOperDownReason specifies the reason that the LDP interface or targeted peer is operationally down.	TmnxLdpIntTargOperDownReasonCode Type Values: 0 operUp 1 adminDown 2 noListenSocket 3 noDiscoverySocket 4 noResources 5 addrFecDeprogram 6 svcFecDeprogram 7 clearDown 8 instanceDown 9 interfaceDown 10 targetIpInvalid 11 interfaceInvalid	.1.3.6.1.4.1.6527.3.1.2.8.5.1.17
vRtrLdpIfTunneling The value of vRtrLdpIfTunneling specifies whether tunneling of LDP over tunnels is enabled. When this object has a value of 'true', tunneling is enabled. When its value is 'false', tunneling is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.8.5.1.18

vRtrLdpIfStatsTable is a read-only table. The purpose of this 
table is to keep statistical information about the LDP Interfaces
and Targeted peers on the LSR.
          
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vRtrLdpIfTable, and the augmenting table,
vRtrLdpIfStatsTable. This in effect extends the vRtrLdpIfTable 
with additional columns. Creation or deletion of a row in the 
vRtrLdpIfTable results in the same fate for the row in the 
vRtrLdpIfStatsTable.

vRtrLdpIfStatsEntry row .1.3.6.1.4.1.6527.3.1.2.8.6.1

A row in this table contains statistical information about an LDP
Interface or Targeted peer.

Some counters contained in a row are for fatal errors received
during a former LDP Session associated with thi…

Indexes

No indexes recorded

Column	Syntax	OID
vRtrLdpIfExistingAdjacencies The value of vRtrLdpIfExistingAdjacencies gives a count of the total active adjacencies on this LDP interface or with this targeted peer.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.6.1.1

vRtrLdpHelloAdjTable is a read-only table. The purpose of this
table is to keep information about Hello Adjacencies for Sessions.  
A hello adjacency can be associated with an LDP interface or with 
a targeted peer. The index includes both the interface index and 
the peer IP address thus referring to the LDP interface or 
targeted peer.

vRtrLdpHelloAdjEntry row .1.3.6.1.4.1.6527.3.1.2.8.7.1

Each row represents a single LDP Hello Adjacency. An LDP Session
can have one or more Hello adjacencies.

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpPeerLdpId vRtrLdpIfIndex vRtrLdpPeerAddress

Column	Syntax	OID
vRtrLdpPeerLdpId vRtrLdpPeerLdpId is an index for the row entry. It specifies the LDP identifier of the peer.	MPLS-LDP-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.6527.3.1.2.8.7.1.1
vRtrLdpHelloAdjLocalLdpId The value of vRtrLdpHelloAdjLocalLdpId specifies the local LDP identifier for this specific adjacency.	MPLS-LDP-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.6527.3.1.2.8.7.1.2
vRtrLdpHelloAdjEntityIndex The value of vRtrLdpHelloAdjEntityIndex specifies the Entity index which is an index for the mplsLdpHelloAdjacencyEntry defined in MPLS-LDP-MIB.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.6527.3.1.2.8.7.1.3
vRtrLdpHelloAdjIndex The value of vRtrLdpHelloAdjIndex gives the Hello adjacency index which is an index for the mplsLdpHelloAdjacencyEntry defined in MPLS-LDP-MIB.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.6527.3.1.2.8.7.1.4
vRtrLdpHelloAdjHoldTimeRemaining The value of vRtrLdpHelloAdjHoldTimeRemaining specifies the hold time remaining for this Hello Adjacency. This interval will change when the next Hello message which corresponds to this Hello Adjacency is received.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.7.1.5
vRtrLdpHelloAdjType The value of vRtrLdpHelloAdjType specifies the type of this Hello Adjacency. If this value is 'link' then this adjacency is a result of a Link Hello. If this value is 'hello', then the adjacency is a result of a Targete…	TmnxLdpAdjacencyType Type Values: 1 link 2 targeted 3 both	.1.3.6.1.4.1.6527.3.1.2.8.7.1.6
vRtrLdpHelloAdjRemoteConfSeqNum The value of vRtrLdpHelloAdjRemoteConfSeqNum specifies the Configuration sequence number that was in the Hello received when this adjacency started up. This configuration sequence number changes when there is a chang…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.7.1.7
vRtrLdpHelloAdjRemoteIpAddress The value of vRtrLdpHelloAdjRemoteIpAddress specifies the peer IP address of the interface/targeted session that sent hellos for this specific adjacency.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.7.1.8
vRtrLdpHelloAdjUpTime The value of vRtrLdpHelloAdjUpTime specifies the time, in hundreds of seconds, that this adjacency has been up.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6527.3.1.2.8.7.1.9
vRtrLdpHelloAdjLocalConfSeqNum The value of vRtrLdpHelloAdjLocalConfSeqNum specifies the Configuration sequence number that was used in the Hello sent when this adjacency started up. This configuration sequence number changes when there is a chang…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.7.1.10
vRtrLdpHelloAdjLocalIpAddress The value of vRtrLdpHelloAdjLocalIpAddress specifies the local IP address of the interface/targeted session used in Hellos sent for this specific adjacency.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.7.1.11
vRtrLdpHelloAdjInHelloMsgCount The value of vRtrLdpHelloAdjInHelloMsgCount specifies the number of Hello messages that have been received for this adjacency.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.7.1.12
vRtrLdpHelloAdjOutHelloMsgCount The value of vRtrLdpHelloAdjOutHelloMsgCount specifies the number of Hello messages that have been sent for this adjacency.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.7.1.13
vRtrLdpHelloAdjLocalHelloTimeout The value of vRtrLdpHelloAdjLocalHelloTimeout specifies the hello timeout used in the Hellos sent for this specific adjacency.	TmnxLdpHelloTimeout Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.7.1.14
vRtrLdpHelloAdjRemoteHelloTimeout The value of vRtrLdpHelloAdjRemoteHelloTimeout specifies the hello timeout used by the remote end that sent Hellos for this specific adjacency.	TmnxLdpHelloTimeout Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.7.1.15

vRtrLdpHelloAdjMapTable is a read-only table which maps to the 
vRtrLdpHelloAdjTable. This table has the same indexes as the 
vRtrLdpHelloAdjTable but the order in which these indexes are 
specified is different for the two tables.

vRtrLdpHelloAdjMapEntry row .1.3.6.1.4.1.6527.3.1.2.8.8.1

Each row represents a single LDP Hello Adjacency. An LDP Session
can have one or more Hello adjacencies.

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpIfIndex vRtrLdpPeerAddress vRtrLdpHelloAdjMapLdpId

Column	Syntax	OID
vRtrLdpHelloAdjMapLdpId vRtrLdpHelloAdjMapLdpId is an index for the row entry. It specifies the LDP identifier of the peer.	MPLS-LDP-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.6527.3.1.2.8.8.1.1

vRtrLdpSessionTable is a read-only table which parallels the
mplsLdpSessionTable in the MPLS-LDP-MIB. The purpose of this 
table is to keep information about a single session between
an LDP entity and an LDP Peer.

vRtrLdpSessionEntry row .1.3.6.1.4.1.6527.3.1.2.8.9.1

A row in this table represents information about a single
session between an LDP entity and an LDP Peer.

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpPeerLdpId

Column	Syntax	OID
vRtrLdpSessLocalLdpId The value of vRtrLdpSessLocalLdpId specifies the local LDP identifier for this LDP session.	MPLS-LDP-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.6527.3.1.2.8.9.1.1
vRtrLdpSessEntityIndex The value of vRtrLdpSessEntityIndex specifies the Entity index for the LDP entity represented in this session.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.6527.3.1.2.8.9.1.2
vRtrLdpSessLabelDistMethod The value of vRtrLdpSessLabelDistMethod specifies the label distribution method used for this LDP session.	TmnxLdpLabelDistMethod Type Values: 1 downstreamOnDemand 2 downstreamUnsolicited	.1.3.6.1.4.1.6527.3.1.2.8.9.1.3
vRtrLdpSessLoopDetectForPV The value of vRtrLdpSessLoopDetectForPV indicates whether loop detection based on path vectors is disabled or enabled for this LDP session. If this object has a value of disabled(0), then loop detection …	Enumeration Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.6527.3.1.2.8.9.1.4
vRtrLdpSessPathVectorLimit If the value of vRtrLdpSessLoopDetectForPV for this entry is 'enabled', then the value of vRtrLdpSessPathVectorLimit represents the Path Vector Limit for this LDP Session. If the value of vRtrLdpSessLoop…	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.6527.3.1.2.8.9.1.5
vRtrLdpSessState The value of vRtrLdpSessState specifies the current state of the LDP session. All of the states 1 - 5 are based on the state machine for session negotiation behavior.	Enumeration Enumerated Values: 1 nonexistent 2 initialized 3 openrec 4 opensent 5 operational	.1.3.6.1.4.1.6527.3.1.2.8.9.1.6
vRtrLdpSessAdjacencyType The value of vRtrLdpSessAdjacencyType specifies the adjacency type(s) supporting this LDP Session.	TmnxLdpAdjacencyType Type Values: 1 link 2 targeted 3 both	.1.3.6.1.4.1.6527.3.1.2.8.9.1.7
vRtrLdpSessProtocolVersion The value of vRtrLdpSessProtocolVersion specifies the version of the LDP Protocol used by this session.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.9.1.8
vRtrLdpSessLocalUdpPort The value of vRtrLdpSessLocalUdpPort specifies the UDP port used locally for LDP discovery.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.8.9.1.9
vRtrLdpSessPeerUdpPort The value of vRtrLdpSessPeerUdpPort specifies the UDP port used on the remote end for LDP discovery.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.8.9.1.10
vRtrLdpSessLocalTcpPort The value of vRtrLdpSessLocalTcpPort specifies the TCP port used locally for the LDP Session.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.8.9.1.11
vRtrLdpSessPeerTcpPort The value of vRtrLdpSessPeerTcpPort specifies the TCP port used on the remote end for the LDP Session.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.6527.3.1.2.8.9.1.12
vRtrLdpSessLocalAddress The value of vRtrLdpSessLocalAddress specifies the IP address used locally for the LDP Session.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.9.1.13
vRtrLdpSessPeerAddress The value of vRtrLdpSessPeerAddress specifies the IP address used on the remote end for the LDP Session.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.9.1.14
vRtrLdpSessKAHoldTimeRemaining The value of vRtrLdpSessKAHoldTimeRemaining specifies the keep alive hold time remaining, in hundredths of seconds, for this LDP session.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6527.3.1.2.8.9.1.15
vRtrLdpSessMaxPduLength The value of vRtrLdpSessMaxPduLength specifies the maximum allowable length for LDP PDUs for this session. This value may have been negotiated during Session Initialization.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.6527.3.1.2.8.9.1.16
vRtrLdpSessUpTime The value of vRtrLdpSessUpTime specifies the time, in hundreds of seconds, since the session was established.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.6527.3.1.2.8.9.1.17
vRtrLdpSessLocalKATimeout The value of vRtrLdpSessLocalKATimeout specifies the keepalive timeout used locally for the LDP Session.	TmnxLdpKeepAliveTimeout Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.9.1.18
vRtrLdpSessPeerKATimeout The value of vRtrLdpSessPeerKATimeout specifies the keepalive timeout used at the remote end of the LDP Session.	TmnxLdpKeepAliveTimeout Type Constraints: range: 1..65535	.1.3.6.1.4.1.6527.3.1.2.8.9.1.19
vRtrLdpSessAdvertise The value of vRtrLdpSessAdvertise indicates the type of FECs that will be transported by the session.	Enumeration Enumerated Values: 1 address 2 service 3 addressAndService	.1.3.6.1.4.1.6527.3.1.2.8.9.1.20
vRtrLdpSessRestartHelperState The value of vRtrLdpSessRestartHelperState indicates whether the entity session is capable of supporting graceful restart. This is negotiated between peers during the session initialization setup.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.8.9.1.21
vRtrLdpSessPeerNumRestart The value of vRtrLdpSessPeerNumRestart indicates the number of times graceful restart helper was initiated for this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.9.1.22
vRtrLdpSessLastRestartTime The value of vRtrLdpSessLastRestartTime indicates the last time graceful restart helper was initiated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.8.9.1.23
vRtrLdpSessFtReconnectTimeNego The value of vRtrLdpSessFtReconnectTimeNego indicates the session's Fault Tolerant(FT) Reconnect Timeout, it is set to the lesser of the neighbor advertised FT Reconnect Timeout, vRtrLdpSessFtReconTimeRemaining and t…	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.9.1.24
vRtrLdpSessFtRecoveryTimeNego The value of vRtrLdpSessFtRecoveryTimeNego indicates the session's Fault Tolerant(FT) recovery timeout, it is set to the lesser of the neighbor advertised FT recovery timeout, vRtrLdpSessFtRecovTimeRemaining and the l…	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.9.1.25
vRtrLdpSessFtReconTimeRemaining The value of vRtrLdpSessFtReconTimeRemaining indicates the amount of time left before the session's Fault Tolerant(FT) reconnect timeout,vRtrLdpSessFtReconnectTimeNego expires.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.9.1.26
vRtrLdpSessFtRecovTimeRemaining This value indicates the amount of time left before session's Fault Tolerant(FT) recovery timeout, vRtrLdpSessFtRecoveryTimeNego expires.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.9.1.27

vRtrLdpSessionStatsTable is a read-only table. The purpose of this
table is to keep statistical information about a single session
between an LDP entity and an LDP Peer.
          
Use of AUGMENTS clause implies a one-to-one dependent relationship
between the base table, vRtrLdpSessionTable, and the augmenting 
table, vRtrLdpSessionStatsTable. This in effect extends the 
vRtrLdpSessionTable with additional columns. Creation or deletion
of a row in the vRtrLdpSessionTable results in the same fate for 
the row in the vRtrLdpSessionStatsTable.

vRtrLdpSessionStatsEntry row .1.3.6.1.4.1.6527.3.1.2.8.10.1

A row in this table represents statistical information about a
single session between an LDP entity and an LDP Peer.

Indexes

No indexes recorded

Column	Syntax	OID
vRtrLdpSessStatsTargAdj The value of vRtrLdpSessStatsTargAdj specifies the number of targeted adjacencies for this session.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.1
vRtrLdpSessStatsLinkAdj The value of vRtrLdpSessStatsLinkAdj specifies the number of link adjacencies for this session.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.2
vRtrLdpSessStatsFECRecv The value of vRtrLdpSessStatsFECRecv counts the number of FECs received for this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.3
vRtrLdpSessStatsFECSent The value of vRtrLdpSessStatsFECSent counts the number of FECs sent for this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.4
vRtrLdpSessStatsHelloIn The value of vRtrLdpSessStatsHelloIn counts the number of Hello Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.5
vRtrLdpSessStatsHelloOut The value of vRtrLdpSessStatsHelloOut counts the number of Hello Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.6
vRtrLdpSessStatsKeepaliveIn The value of vRtrLdpSessStatsKeepaliveIn counts the number of Keepalive Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.7
vRtrLdpSessStatsKeepaliveOut The value of vRtrLdpSessStatsKeepaliveOut counts the number of Keepalive Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.8
vRtrLdpSessStatsInitIn The value of vRtrLdpSessStatsInitIn counts the number of Init Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.9
vRtrLdpSessStatsInitOut The value of vRtrLdpSessStatsInitOut counts the number of Init Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.10
vRtrLdpSessStatsLabelMappingIn The value of vRtrLdpSessStatsLabelMappingIn counts the number of Label Mapping Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.11
vRtrLdpSessStatsLabelMappingOut The value of vRtrLdpSessStatsLabelMappingOut counts the number of Label Mapping Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.12
vRtrLdpSessStatsLabelRequestIn The value of vRtrLdpSessStatsLabelRequestIn counts the number of Label Request Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.13
vRtrLdpSessStatsLabelRequestOut The value of vRtrLdpSessStatsLabelRequestOut counts the number of Label Request Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.14
vRtrLdpSessStatsLabelReleaseIn The value of vRtrLdpSessStatsLabelReleaseIn counts the number of Label Release Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.15
vRtrLdpSessStatsLabelReleaseOut The value of vRtrLdpSessStatsLabelReleaseOut counts the number of Label Release Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.16
vRtrLdpSessStatsLabelWithdrawIn The value of vRtrLdpSessStatsLabelWithdrawIn counts the number of Label Withdraw Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.17
vRtrLdpSessStatsLabelWithdrawOut The value of vRtrLdpSessStatsLabelWithdrawOut counts the number of Label Withdraw Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.18
vRtrLdpSessStatsLabelAbortIn The value of vRtrLdpSessStatsLabelAbortIn counts the number of Label Abort Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.19
vRtrLdpSessStatsLabelAbortOut The value of vRtrLdpSessStatsLabelAbortOut counts the number of Label Abort Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.20
vRtrLdpSessStatsAddrIn The value of vRtrLdpSessStatsAddrIn counts the number of Address Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.21
vRtrLdpSessStatsAddrOut The value of vRtrLdpSessStatsAddrOut counts the number of Address Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.22
vRtrLdpSessStatsAddrWithdrawIn The value of vRtrLdpSessStatsAddrWithdrawIn counts the number of Address Withdraw Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.23
vRtrLdpSessStatsAddrWithdrawOut The value of vRtrLdpSessStatsAddrWithdrawOut counts the number of Address Withdraw Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.24
vRtrLdpSessStatsNotificationIn The value of vRtrLdpSessStatsNotificationIn counts the number of Notification Messages that have been received during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.25
vRtrLdpSessStatsNotificationOut The value of vRtrLdpSessStatsNotificationOut counts the number of Notification Messages that have been sent during this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.10.1.26

vRtrLdpServFecTable is a read-only table that represents all 
service FECs either sent to or received from an LDP peer known
to the Virtual Router.

vRtrLdpServFecEntry row .1.3.6.1.4.1.6527.3.1.2.8.11.1

Each row entry represents an instance of a service FEC sent to
or received from an LDP peer.

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpServFecFecType vRtrLdpServFecVcType vRtrLdpServFecVcId vRtrLdpPeerLdpId

Column	Syntax	OID
vRtrLdpServFecFecType The value of vRtrLdpServFecFecType specifies the FEC type.	TmnxLdpFECType Type Values: 1 addrWildcard 2 addrPrefix 3 addrHost 128 vll 129 vpws 130 vpls	.1.3.6.1.4.1.6527.3.1.2.8.11.1.1
vRtrLdpServFecVcType The value of vRtrLdpServFecVcType specifies the VC type associated with this service FEC.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxVcType Type Values: 1 frDlciMartini 2 atmSdu 3 atmCell 4 ethernetVlan 5 ethernet 9 atmVccCell 10 atmVpcCell 11 ipipe 17 satopE1 18 satopT1 19 satopE3 20 satopT3 21 cesopsn 23 cesopsnCas 25 frDlci 4096 mirrorDest	.1.3.6.1.4.1.6527.3.1.2.8.11.1.2
vRtrLdpServFecVcId The value of vRtrLdpServFecVcId specifies the VC identifier associated with this service FEC.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxVcId Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.3
vRtrLdpServFecServType The value of vRtrLdpServFecServType specifies the Service type associated with this service FEC.	ALCATEL-ENT1-TIMETRA-SERV-MIBServType Type Values: 0 unknown 1 epipe 2 p3pipe 3 tls 4 vprn 5 ies 6 mirror 7 apipe 8 fpipe 9 ipipe 10 cpipe	.1.3.6.1.4.1.6527.3.1.2.8.11.1.4
vRtrLdpServFecServId The value of vRtrLdpServFecServId specifies the Service identifier associated with this service FEC.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6527.3.1.2.8.11.1.5
vRtrLdpServFecVpnId The value of vRtrLdpServFecVpnId identifies the VPN associated with the FEC.	TmnxVpnId Type Constraints: range: 10	.1.3.6.1.4.1.6527.3.1.2.8.11.1.6
vRtrLdpServFecFlags The bit flags of vRtrLdpServFecFlags specify the characteristics of the FEC.	TmnxLdpFECFlags Type Values: 0 dummyB0 1 egress 2 ingress 3 installedSwap 4 installedPush 5 installedPop 6 local 7 nextHop 8 importPolicyRejected 9 exportPolicyAccepted 10 installedStaticFec 11 vcSwitching 12 importTargPolicyRejected 13 exportTargPolicyRejected	.1.3.6.1.4.1.6527.3.1.2.8.11.1.7
vRtrLdpServFecNumInLabels The value of vRtrLdpServFecNumInLabels gives the number of labels that have been sent to the peer associated with this FEC. This value also indicates which of the following vRtrLdpServFecInLabel1 thru vRtrLdpServFecI…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.8
vRtrLdpServFecNumOutLabels The value of vRtrLdpServFecNumOutLabels gives the number of labels that have been received from the peer associated with this FEC. This value also indicates which of the following vRtrLdpServFecOutLabel1 thru vRtrLdpSe…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.9
vRtrLdpServFecInLabel1 The value of vRtrLdpServFecInLabel1 specifies the first ingress label exchanged	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.10
vRtrLdpServFecInLabelStatus1 The value of vRtrLdpServFecInLabelStatus1 specifies the status of the ingress label 1	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.11
vRtrLdpServFecInLabel2 The value of vRtrLdpServFecInLabel2 specifies the second ingress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.12
vRtrLdpServFecInLabelStatus2 The value of vRtrLdpServFecInLabelStatus2 specifies the status of the ingress label 2	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.13
vRtrLdpServFecInLabel3 The value of vRtrLdpServFecInLabel3 specifies the third ingress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.14
vRtrLdpServFecInLabelStatus3 The value of vRtrLdpServFecInLabelStatus3 specifies the status of the ingress label 3	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.15
vRtrLdpServFecInLabel4 The value of vRtrLdpServFecInLabel4 specifies the fourth ingress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.16
vRtrLdpServFecInLabelStatus4 The value of vRtrLdpServFecInLabelStatus4 specifies the status of the ingress label 4	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.17
vRtrLdpServFecInLabel5 The value of vRtrLdpServFecInLabel5 specifies the fifth ingress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.18
vRtrLdpServFecInLabelStatus5 The value of vRtrLdpServFecInLabelStatus5 specifies the status of the ingress label 5	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.19
vRtrLdpServFecOutLabel1 The value of vRtrLdpServFecOutLabel1 specifies the first egress label exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.20
vRtrLdpServFecOutLabelStatus1 The value of vRtrLdpServFecOutLabelStatus1 specifies the status of the egress label 1	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.21
vRtrLdpServFecOutLabel2 The value of vRtrLdpServFecOutLabel2 specifies the second egress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.22
vRtrLdpServFecOutLabelStatus2 The value of vRtrLdpServFecOutLabelStatus2 specifies the status of the egress label 2	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.23
vRtrLdpServFecOutLabel3 The value of vRtrLdpServFecOutLabel3 specifies the third egress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.24
vRtrLdpServFecOutLabelStatus3 The value of vRtrLdpServFecOutLabelStatus3 specifies the status of the egress label 3	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.25
vRtrLdpServFecOutLabel4 The value of vRtrLdpServFecOutLabel4 specifies the fourth egress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.26
vRtrLdpServFecOutLabelStatus4 The value of vRtrLdpServFecOutLabelStatus4 specifies the status of the egress label 4	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.27
vRtrLdpServFecOutLabel5 The value of vRtrLdpServFecOutLabel5 specifies the fifth egress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.28
vRtrLdpServFecOutLabelStatus5 The value of vRtrLdpServFecOutLabelStatus5 specifies the status of the egress label 5	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.11.1.29
vRtrLdpServFecSdpId The value of vRtrLdpServFecSdpId identifies the SDP associated with this peer.	ALCATEL-ENT1-TIMETRA-SERV-MIBSdpId Type Constraints: range: 0..17407	.1.3.6.1.4.1.6527.3.1.2.8.11.1.30
vRtrLdpServFecLocalMTU The value of vRtrLdpServFecLocalMTU specifies the largest service frame size (in octets) that can be handled by the local ESR.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.31
vRtrLdpServFecRemoteMTU The value of vRtrLdpServFecRemoteMTU specifies the largest service frame size (in octets) that can be handled by the remote ESR.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.32
vRtrLdpServFecLocalVlanTag The value of vRtrLdpServFecLocalVlanTag specifies the local tag on a VLAN VC type SDP binding.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.33
vRtrLdpServFecRemoteVlanTag The value of vRtrLdpServFecRemoteVlanTag specifies the remote tag on a VLAN VC type SDP binding.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.34
vRtrLdpServFecLocalMaxCellConcat The value of vRtrLdpServFecLocalMaxCellConcat specifies the local maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.35
vRtrLdpServFecRemoteMaxCellConcat The value of vRtrLdpServFecRemoteMaxCellConcat specifies the remote maximum number of ATM cells to concatenate on a ATM cell-mode VC type SDP binding.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.36
vRtrLdpServFecInLabelSigStatus1 The value of vRtrLdpServFecInLabelSigStatus1 indicates the signaling status for vRtrLdpServFecInLabel1.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.37
vRtrLdpServFecInLabelSigStatus2 The value of vRtrLdpServFecInLabelSigStatus2 indicates the signaling status for vRtrLdpServFecInLabel2.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.38
vRtrLdpServFecInLabelSigStatus3 The value of vRtrLdpServFecInLabelSigStatus3 indicates the signaling status for vRtrLdpServFecInLabel3.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.39
vRtrLdpServFecInLabelSigStatus4 The value of vRtrLdpServFecInLabelSigStatus4 indicates the signaling status for vRtrLdpServFecInLabel4.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.40
vRtrLdpServFecInLabelSigStatus5 The value of vRtrLdpServFecInLabelSigStatus5 indicates the signaling status for vRtrLdpServFecInLabel5.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.41
vRtrLdpServFecOutLabelSigStatus1 The value of vRtrLdpServFecOutLabelSigStatus1 indicates the signaling status for vRtrLdpServFecOutLabel1.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.42
vRtrLdpServFecOutLabelSigStatus2 The value of vRtrLdpServFecOutLabelSigStatus2 indicates the signaling status for vRtrLdpServFecOutLabel2.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.43
vRtrLdpServFecOutLabelSigStatus3 The value of vRtrLdpServFecOutLabelSigStatus3 indicates the signaling status for vRtrLdpServFecOutLabel3.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.44
vRtrLdpServFecOutLabelSigStatus4 The value of vRtrLdpServFecOutLabelSigStatus4 indicates the signaling status for vRtrLdpServFecOutLabel4.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.45
vRtrLdpServFecOutLabelSigStatus5 The value of vRtrLdpServFecOutLabelSigStatus5 indicates the signaling status for vRtrLdpServFecOutLabel5.	TmnxLabelSigStatus	.1.3.6.1.4.1.6527.3.1.2.8.11.1.46
vRtrLdpServFecMateEndpointVcId The value of vRtrLdpServFecMateEndpointVcId specifies the VC identifier associated with this service FEC mate endpoint for vc-switching.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxVcId Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.11.1.47
vRtrLdpServFecMateEndpointSdpId The value of vRtrLdpServFecMateEndpointSdpId identifies the SDP associated with this service FEC mate endpoint for vc-switching.	ALCATEL-ENT1-TIMETRA-SERV-MIBSdpId Type Constraints: range: 0..17407	.1.3.6.1.4.1.6527.3.1.2.8.11.1.48

vRtrLdpServFecMapTable is a read-only table which maps to the 
vRtrLdpServFecTable. This table has the same indexes as the 
vRtrLdpServFecTable but the order in which these indexes are 
specified is different for the two tables.

vRtrLdpServFecMapEntry row .1.3.6.1.4.1.6527.3.1.2.8.12.1

Each row entry represents an instance of a service FEC sent to
or received from an LDP peer.

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpPeerLdpId vRtrLdpServFecMapFecType vRtrLdpServFecMapVcType vRtrLdpServFecMapVcId

Column	Syntax	OID
vRtrLdpServFecMapFecTypeobsolete The value of vRtrLdpServFecMapFecType specifies the FEC type.	TmnxLdpFECType Type Values: 1 addrWildcard 2 addrPrefix 3 addrHost 128 vll 129 vpws 130 vpls	.1.3.6.1.4.1.6527.3.1.2.8.12.1.1
vRtrLdpServFecMapVcTypeobsolete The value of vRtrLdpServFecMapVcType specifies the VC type associated with this service FEC.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxVcType Type Values: 1 frDlciMartini 2 atmSdu 3 atmCell 4 ethernetVlan 5 ethernet 9 atmVccCell 10 atmVpcCell 11 ipipe 17 satopE1 18 satopT1 19 satopE3 20 satopT3 21 cesopsn 23 cesopsnCas 25 frDlci 4096 mirrorDest	.1.3.6.1.4.1.6527.3.1.2.8.12.1.2
vRtrLdpServFecMapVcIdobsolete The value of vRtrLdpServFecMapVcId specifies the VC identifier associated with this service FEC.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxVcId Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.12.1.3

vRtrLdpAddrFecTable is a read-only table that represents all 
address FECs either sent to or received from an LDP peer known 
to the Virtual Router.

vRtrLdpAddrFecEntry row .1.3.6.1.4.1.6527.3.1.2.8.13.1

Each row entry represents an instance of an address FEC sent
to or received from an LDP peer.

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpAddrFecFecType vRtrLdpAddrFecIpPrefix vRtrLdpAddrFecIpMask vRtrLdpPeerLdpId

Column	Syntax	OID
vRtrLdpAddrFecFecType The value of vRtrLdpAddrFecFecType specifies the FEC type.	TmnxLdpFECType Type Values: 1 addrWildcard 2 addrPrefix 3 addrHost 128 vll 129 vpws 130 vpls	.1.3.6.1.4.1.6527.3.1.2.8.13.1.1
vRtrLdpAddrFecIpPrefix The value of vRtrLdpAddrFecIpPrefix specifies the IP Address Prefix for this address FEC.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.13.1.2
vRtrLdpAddrFecIpMask The value of vRtrLdpAddrFecIpMask specifies the IP Address Mask for this address FEC.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.13.1.3
vRtrLdpAddrFecFlags The bit flags of vRtrLdpAddrFecFlags specify the characteristics of the FEC.	TmnxLdpFECFlags Type Values: 0 dummyB0 1 egress 2 ingress 3 installedSwap 4 installedPush 5 installedPop 6 local 7 nextHop 8 importPolicyRejected 9 exportPolicyAccepted 10 installedStaticFec 11 vcSwitching 12 importTargPolicyRejected 13 exportTargPolicyRejected	.1.3.6.1.4.1.6527.3.1.2.8.13.1.4
vRtrLdpAddrFecNumInLabels The value of vRtrLdpAddrFecNumInLabels gives the number of labels that have been sent to the peer associated with this FEC. This value also indicates which of the following vRtrLdpAddrFecInLabel1 thru vRtrLdpAddrFecIn…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.5
vRtrLdpAddrFecNumOutLabels The value of vRtrLdpAddrFecNumOutLabels gives the number of labels that have been received from the peer associated with this FEC. This value also indicates which of the following vRtrLdpAddrFecOutLabel1 thru vRtrLdpAd…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.6
vRtrLdpAddrFecInLabel1 The value of vRtrLdpAddrFecInLabel1 specifies the first ingress label exchanged	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.7
vRtrLdpAddrFecInLabelStatus1 The value of vRtrLdpAddrFecInLabelStatus1 specifies the status of the ingress label 1	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.8
vRtrLdpAddrFecInLabelIfIndex1 The value of vRtrLdpAddrFecInLabelIfIndex1 specifies the interface index for ingress label 1	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.9
vRtrLdpAddrFecInLabel2 The value of vRtrLdpAddrFecInLabel2 specifies the second ingress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.10
vRtrLdpAddrFecInLabelStatus2 The value of vRtrLdpAddrFecInLabelStatus2 specifies the status of the ingress label	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.11
vRtrLdpAddrFecInLabelIfIndex2 The value of vRtrLdpAddrFecInLabelIfIndex2 specifies the interface index for ingress label 2	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.12
vRtrLdpAddrFecInLabel3 The value of vRtrLdpAddrFecInLabel3 specifies the third ingress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.13
vRtrLdpAddrFecInLabelStatus3 The value of vRtrLdpAddrFecInLabelStatus3 specifies the status of the ingress label 3	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.14
vRtrLdpAddrFecInLabelIfIndex3 The value of vRtrLdpAddrFecInLabelIfIndex3 specifies the interface index for ingress label 3	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.15
vRtrLdpAddrFecInLabel4 The value of vRtrLdpAddrFecInLabel4 specifies the fourth ingress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.16
vRtrLdpAddrFecInLabelStatus4 The value of vRtrLdpAddrFecInLabelStatus4 specifies the status of the ingress label 4	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.17
vRtrLdpAddrFecInLabelIfIndex4 The value of vRtrLdpAddrFecInLabelIfIndex4 specifies the interface index for ingress label 4	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.18
vRtrLdpAddrFecInLabel5 The value of vRtrLdpAddrFecInLabel5 specifies the fifth ingress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.19
vRtrLdpAddrFecInLabelStatus5 The value of vRtrLdpAddrFecInLabelStatus5 specifies the status of the ingress label 5	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.20
vRtrLdpAddrFecInLabelIfIndex5 The value of vRtrLdpAddrFecInLabelIfIndex5 specifies the interface index for ingress label 5	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.21
vRtrLdpAddrFecOutLabel1 The value of vRtrLdpAddrFecOutLabel1 specifies the first egress label exchanged	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.22
vRtrLdpAddrFecOutLabelStatus1 The value of vRtrLdpAddrFecOutLabelStatus1 specifies the status of the egress label 1	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.23
vRtrLdpAddrFecOutLabelIfIndex1 The value of vRtrLdpAddrFecOutLabelIfIndex1 specifies the interface index for egress label 1	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.24
vRtrLdpAddrFecOutLabelNextHop1 The value of vRtrLdpAddrFecOutLabelNextHop1 specifies the IP address of the next hop for egress label 1	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.13.1.25
vRtrLdpAddrFecOutLabel2 The value of vRtrLdpAddrFecOutLabel2 specifies the second egress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.26
vRtrLdpAddrFecOutLabelStatus2 The value of vRtrLdpAddrFecOutLabelStatus2 specifies the status of the egress label 2	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.27
vRtrLdpAddrFecOutLabelIfIndex2 The value of vRtrLdpAddrFecOutLabelIfIndex2 specifies the interface index for egress label 2	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.28
vRtrLdpAddrFecOutLabelNextHop2 The value of vRtrLdpAddrFecOutLabelNextHop2 specifies the IP address of the next hop for egress label 2	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.13.1.29
vRtrLdpAddrFecOutLabel3 The value of vRtrLdpAddrFecOutLabel3 specifies the third egress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.30
vRtrLdpAddrFecOutLabelStatus3 The value of vRtrLdpAddrFecOutLabelStatus3 specifies the status of the egress label 3	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.31
vRtrLdpAddrFecOutLabelIfIndex3 The value of vRtrLdpAddrFecOutLabelIfIndex3 specifies the interface index for egress label 3	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.32
vRtrLdpAddrFecOutLabelNextHop3 The value of vRtrLdpAddrFecOutLabelNextHop3 specifies the IP address of the next hop for egress label 3	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.13.1.33
vRtrLdpAddrFecOutLabel4 The value of vRtrLdpAddrFecOutLabel4 specifies the fourth egress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.34
vRtrLdpAddrFecOutLabelStatus4 The value of vRtrLdpAddrFecOutLabelStatus4 specifies the status of the egress label 4	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.35
vRtrLdpAddrFecOutLabelIfIndex4 The value of vRtrLdpAddrFecOutLabelIfIndex4 specifies the interface index for egress label 4	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.36
vRtrLdpAddrFecOutLabelNextHop4 The value of vRtrLdpAddrFecOutLabelNextHop4 specifies the IP address of the next hop for egress label 4	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.13.1.37
vRtrLdpAddrFecOutLabel5 The value of vRtrLdpAddrFecOutLabel5 specifies the fifth egress label (if at all) exchanged.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.8.13.1.38
vRtrLdpAddrFecOutLabelStatus5 The value of vRtrLdpAddrFecOutLabelStatus5 specifies the status of the egress label 5	TmnxLabelStatus Type Values: 0 dummyB0 1 dummyB1 2 statusSignalingSupported 3 inUsePush 4 inUseSwap 5 inUsePop 6 released 7 notInUse 8 withdrawn 9 controlWord	.1.3.6.1.4.1.6527.3.1.2.8.13.1.39
vRtrLdpAddrFecOutLabelIfIndex5 The value of vRtrLdpAddrFecOutLabelIfIndex5 specifies the interface index for egress label 5	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6527.3.1.2.8.13.1.40
vRtrLdpAddrFecOutLabelNextHop5 The value of vRtrLdpAddrFecOutLabelNextHop5 specifies the IP address of the next hop for egress label 5	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.13.1.41
vRtrLdpAddrFecLspId The value of vRtrLdpAddrFecLspId indicates the LSP id of the LSP associated with the specified service FEC.	ALCATEL-ENT1-TIMETRA-TC-MIBTmnxVRtrMplsLspID Type Constraints: range: 0..65535	.1.3.6.1.4.1.6527.3.1.2.8.13.1.42

vRtrLdpAddrFecMapTable is a read-only table which maps to the
vRtrLdpAddrFecTable. This table has the same indexes as the 
vRtrLdpAddrFecTable but the order in which these indexes are 
specified is different for the two tables.

vRtrLdpAddrFecMapEntry row .1.3.6.1.4.1.6527.3.1.2.8.14.1

Each row entry represents an instance of an address FEC sent
to or received from an LDP peer.

Indexes

ALCATEL-ENT1-TIMETRA-VRTR-MIBvRtrID vRtrLdpPeerLdpId vRtrLdpAddrFecMapFecType vRtrLdpAddrFecMapIpPrefix vRtrLdpAddrFecMapIpMask

Column	Syntax	OID
vRtrLdpAddrFecMapFecType The value of vRtrLdpAddrFecMapFecType specifies the FEC type.	TmnxLdpFECType Type Values: 1 addrWildcard 2 addrPrefix 3 addrHost 128 vll 129 vpws 130 vpls	.1.3.6.1.4.1.6527.3.1.2.8.14.1.1
vRtrLdpAddrFecMapIpPrefix The value of vRtrLdpAddrFecMapIpPrefix specifies the IP Address Prefix for this address FEC.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.14.1.2
vRtrLdpAddrFecMapIpMask The value of vRtrLdpAddrFecMapIpMask specifies the IP Address Mask for this address FEC.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6527.3.1.2.8.14.1.3

vRtrLdpAdjBackoffTable is a read-only table which augments
the vRtrLdpHelloAdjTable. The purpose of this table is to
keep backoff information about the LDP Hello Adjacencies on
the virtual router.
          
Use of AUGMENTS clause implies a one-to-one dependent 
relationship between the base table, vRtrLdpHelloAdjTable,
and the augmenting table vRtrLdpAdjBackoffTable. This in 
effect extends the vRtrLdpHelloAdjTable with additional 
columns.  Creation or deletion of a row in the 
vRtrLdpHelloAdjTable results in the same fate for the row 
in the vRtrLdpAdjBackoffTable.