ALCATEL-ENT1-QOS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
41
Rows
41
Columns
670
alaQoSRuleTable
table
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1
·
1 row entry
·
27 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSRuleTable'
Table of QoS Rule definitions
Definition of QoS Rule
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.1 |
||||||||||||
|
Is this rule enabled or not
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.2 |
||||||||||||
|
What entity created the rule.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.3 |
||||||||||||
|
Precedence value for rule.
Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.4 |
||||||||||||
|
Name of the condition to use
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.5 |
||||||||||||
|
Name of the action to use
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.6 |
||||||||||||
|
Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.7 |
||||||||||||
|
Indicator to tell whether to write out the rule during
snapshot commands. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.8 |
||||||||||||
|
Indicator to tell whether to log matches to this rule
in the QoS log. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.9 |
||||||||||||
|
Is this rule currenly being enforced on the switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.10 |
||||||||||||
|
Is this rule enforcable by the switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.11 |
||||||||||||
|
Used to create/delete rules according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.12 |
||||||||||||
|
Name of the validity period to use
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.13 |
||||||||||||
|
Status field indicating whether there is a validity period
associated with this rule |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.14 |
||||||||||||
|
How often to look for packets matching this rule when logging.
When 0 log as many as possible. |
Integer32r/w Constraints: range: 0-3600 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.15 |
||||||||||||
|
Which rule statistics counters to update if not all are available
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.16 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.17 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.18 |
||||||||||||
|
The type of rule this is. Each bit represents the following:
0x1 = bridged 0x2 = routed 0x4 = multicast |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.19 |
||||||||||||
|
Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked? |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.20 |
||||||||||||
|
This rule belongs to the default policy list.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.21 |
||||||||||||
|
Counter for the number of packets being green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.22 |
||||||||||||
|
Counter for the number of packets being yellow compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.23 |
||||||||||||
|
Counter for the number of packets being red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.24 |
||||||||||||
|
Counter for the number of packets being green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.25 |
||||||||||||
|
Counter for the number of packets being yellow compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.26 |
||||||||||||
|
Counter for the number of packets being red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.27 |
alaQoSAppliedRuleTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2
·
1 row entry
·
27 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedRuleTable'
Table of QoS AppliedRule definitions
Definition of QoS AppliedRule
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.1 |
||||||||||||
|
Is this rule enabled or not
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.2 |
||||||||||||
|
What entity created the rule.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.3 |
||||||||||||
|
Precedence value for rule.
Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are received. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.4 |
||||||||||||
|
Name of the condition to use
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.5 |
||||||||||||
|
Name of the action to use
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.6 |
||||||||||||
|
Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.7 |
||||||||||||
|
Indicator to tell whether to write out the rule during
snapshot commands. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.8 |
||||||||||||
|
Indicator to tell whether to log matches to this rule
in the QoS log. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.9 |
||||||||||||
|
Is this rule currenly being enforced on the switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.10 |
||||||||||||
|
Is this rule enforcable by the switch.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.11 |
||||||||||||
|
Used to create/delete rules according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.12 |
||||||||||||
|
Name of the validity period to use
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.13 |
||||||||||||
|
Status field indicating whether there is a validity period
associated with this rule |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.14 |
||||||||||||
|
How often to look for packets matching this rule when logging.
When 0 log as many as possible. |
Integer32 Constraints: range: 0-3600 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.15 |
||||||||||||
|
Which rule statistics counters to update if not all are available
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.16 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.17 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.18 |
||||||||||||
|
The type of rule this is. Each bit represents the following:
0x1 = bridged 0x2 = routed 0x4 = multicast |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.19 |
||||||||||||
|
Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked? |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.20 |
||||||||||||
|
This rule belongs to the default policy list.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.21 |
||||||||||||
|
Counter for the number of packets being green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.22 |
||||||||||||
|
Counter for the number of packets being yellow compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.23 |
||||||||||||
|
Counter for the number of packets being red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.24 |
||||||||||||
|
Counter for the number of packets being green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.25 |
||||||||||||
|
Counter for the number of packets being yellow compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.26 |
||||||||||||
|
Counter for the number of packets being red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.27 |
alaQoSConditionTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3
·
1 row entry
·
143 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSConditionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSConditionTable'
Table of QoS Condition definitions
Definition of QoS Condition
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of condition
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.1 |
||||||||||||
|
What entity created the condition.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.2 |
||||||||||||
|
Source physical slot used for traffic classification
When 0, the port identifies an aggregate |
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.3 |
||||||||||||
|
Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.4 |
||||||||||||
|
Source physical port range start to use for
traffic classification |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.5 |
||||||||||||
|
Source physical port group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.6 |
||||||||||||
|
Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.7 |
||||||||||||
|
Destination physical slot used for traffic classification
When 0, the port identifies an aggregate |
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.8 |
||||||||||||
|
Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.9 |
||||||||||||
|
Destination physical port range start to use for traffic
classification |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.10 |
||||||||||||
|
Destination physical port group to use for traffic
classification |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.11 |
||||||||||||
|
Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.12 |
||||||||||||
|
Source MAC address to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.13 |
||||||||||||
|
Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.14 |
||||||||||||
|
Source MAC mask to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.15 |
||||||||||||
|
Source MAC group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.16 |
||||||||||||
|
Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.17 |
||||||||||||
|
Destination MAC address to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.18 |
||||||||||||
|
Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.19 |
||||||||||||
|
Destination MAC mask to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.20 |
||||||||||||
|
Destination MAC group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.21 |
||||||||||||
|
Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.22 |
||||||||||||
|
Source VLAN to use for traffic classification
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.23 |
||||||||||||
|
Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.24 |
||||||||||||
|
Destination VLAN to use for traffic classification
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.25 |
||||||||||||
|
Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.26 |
||||||||||||
|
802.1p value to use for traffic classification
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.27 |
||||||||||||
|
Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.28 |
||||||||||||
|
Source IP address to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.29 |
||||||||||||
|
Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.30 |
||||||||||||
|
Source IP mask to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.31 |
||||||||||||
|
Source network group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.32 |
||||||||||||
|
Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.33 |
||||||||||||
|
Destination IP address to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.34 |
||||||||||||
|
Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.35 |
||||||||||||
|
Destination IP mask to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.36 |
||||||||||||
|
Destination network group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.37 |
||||||||||||
|
Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.38 |
||||||||||||
|
Multicast IP address to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.39 |
||||||||||||
|
Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.40 |
||||||||||||
|
Multicast IP mask to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.41 |
||||||||||||
|
Multicast network group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.42 |
||||||||||||
|
Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.43 |
||||||||||||
|
TOS value to use for traffic classification
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.44 |
||||||||||||
|
Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.45 |
||||||||||||
|
TOS mask to use for traffic classification
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.46 |
||||||||||||
|
DSCP value to use for traffic classification
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.47 |
||||||||||||
|
Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.48 |
||||||||||||
|
DSCP mask to use for traffic classification
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.49 |
||||||||||||
|
IP protocol to use for traffic classification.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.50 |
||||||||||||
|
Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.51 |
||||||||||||
|
Source IP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.52 |
||||||||||||
|
Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.53 |
||||||||||||
|
Destination IP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.54 |
||||||||||||
|
Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.55 |
||||||||||||
|
Name of service to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.56 |
||||||||||||
|
Status field indicating whether the service
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.57 |
||||||||||||
|
Name of service group to use for traffic classification
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.58 |
||||||||||||
|
Status field indicating whether the service group
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.59 |
||||||||||||
|
ICMP type to use for traffic classification
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.60 |
||||||||||||
|
Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.61 |
||||||||||||
|
ICMP code to use for traffic classification
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.62 |
||||||||||||
|
Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.63 |
||||||||||||
|
Used to create/delete conditions according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.64 |
||||||||||||
|
Source physical port range end to use for traffic
classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.65 |
||||||||||||
|
Destination physical port range end to use for traffic
classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.66 |
||||||||||||
|
Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.67 |
||||||||||||
|
Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.68 |
||||||||||||
|
Source TCP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.69 |
||||||||||||
|
Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.70 |
||||||||||||
|
Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.71 |
||||||||||||
|
Destination TCP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.72 |
||||||||||||
|
Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.73 |
||||||||||||
|
Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.74 |
||||||||||||
|
Source UDP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.75 |
||||||||||||
|
Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.76 |
||||||||||||
|
Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.77 |
||||||||||||
|
Destination UDP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.78 |
||||||||||||
|
Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.79 |
||||||||||||
|
Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.80 |
||||||||||||
|
Ethertype value to use for traffic classification
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.81 |
||||||||||||
|
Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.82 |
||||||||||||
|
Use any/all specifieid TCP flags for traffic classification
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.83 |
||||||||||||
|
Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.84 |
||||||||||||
|
TCP flags values used for traffic classification
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.85 |
||||||||||||
|
Not used
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.86 |
||||||||||||
|
Mask of TCP flags bits used for traffic classification
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.87 |
||||||||||||
|
Not used
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.88 |
||||||||||||
|
Look for established TCP sessions in classification
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.89 |
||||||||||||
|
Source IPv6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.90 |
||||||||||||
|
Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.91 |
||||||||||||
|
Source IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.92 |
||||||||||||
|
Destination IPv6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.93 |
||||||||||||
|
Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.94 |
||||||||||||
|
Destination IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.95 |
||||||||||||
|
classify IPV6 traffic
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.96 |
||||||||||||
|
NH value to use for traffic classification
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.97 |
||||||||||||
|
Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.98 |
||||||||||||
|
FL value to use for traffic classification
|
Integer32r/w Constraints: range: 0-1048575 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.99 |
||||||||||||
|
Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.100 |
||||||||||||
|
Multicast IPv6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.101 |
||||||||||||
|
Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.102 |
||||||||||||
|
Multicast IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.103 |
||||||||||||
|
DSCP value to use for traffic classification
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.104 |
||||||||||||
|
Customer VLAN to use for traffic classification
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.105 |
||||||||||||
|
Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.106 |
||||||||||||
|
Customer 802.1p to use for traffic classification
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.107 |
||||||||||||
|
Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.108 |
||||||||||||
|
Name of Vrf to match traffic in
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.109 |
||||||||||||
|
Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.110 |
||||||||||||
|
TCP packet fragments
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.111 |
||||||||||||
|
Source physical chassis used for traffic classification.
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.112 |
||||||||||||
|
Destination physical chassis used for traffic classification.
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.113 |
||||||||||||
|
Application Fingerprinting group.
|
OctetStringr/w Constraints: range: 1-24 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.114 |
||||||||||||
|
Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.115 |
||||||||||||
|
SIP type to use for traffic classification
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.116 |
||||||||||||
|
SIP Status field indicates whether SIP is enabled or disabled
for traffic classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.117 |
||||||||||||
|
DPI Application Name associated with a policy condition.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.118 |
||||||||||||
|
DPI Group Name associated with a policy condition.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.119 |
||||||||||||
|
DPI Status field indicates whether DPI Application Name is enabled or disabled
for traffic classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.120 |
||||||||||||
|
DPI Status field indicates whether DPI Application Group is enabled or disabled
for traffic classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.121 |
||||||||||||
| Integer32r/w Constraints: range: 0-16777215 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.122 |
|||||||||||||
|
Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.123 |
||||||||||||
| Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.124 |
|||||||||||||
|
Status field indicating whether the VXLAN Port needs
to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.125 |
||||||||||||
|
Source MAC address to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.126 |
||||||||||||
|
Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.127 |
||||||||||||
|
Source MAC mask to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.128 |
||||||||||||
|
Source IP address to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.129 |
||||||||||||
|
Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.130 |
||||||||||||
|
Source IP mask to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.131 |
||||||||||||
|
Destination IP address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.132 |
||||||||||||
|
Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.133 |
||||||||||||
|
Source IP mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.134 |
||||||||||||
|
IP protocol to use for traffic classification.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.135 |
||||||||||||
|
Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.136 |
||||||||||||
|
Source IP port to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.137 |
||||||||||||
|
Status field indicating whether the source IP port
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.138 |
||||||||||||
|
Destination IP port to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.139 |
||||||||||||
|
Status field indicating whether the destination port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.140 |
||||||||||||
|
Status field indicating vxlan configuration.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.141 |
||||||||||||
|
Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.142 |
||||||||||||
|
Status field indicating whether the source physical port splitGroup
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.143 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4
·
1 row entry
·
143 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedConditionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedConditionTable'
Table of QoS AppliedCondition definitions
Definition of QoS AppliedCondition
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of condition
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.1 |
||||||||||||
|
What entity created the condition.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.2 |
||||||||||||
|
Source physical slot used for traffic classification
When 0, the port identifies an aggregate |
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.3 |
||||||||||||
|
Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.4 |
||||||||||||
|
Source physical port range start to use for
traffic classification |
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.5 |
||||||||||||
|
Source physical port group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.6 |
||||||||||||
|
Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.7 |
||||||||||||
|
Destination physical slot used for traffic classification
When 0, the port identifies an aggregate |
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.8 |
||||||||||||
|
Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.9 |
||||||||||||
|
Destination physical port range start to use for traffic
classification |
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.10 |
||||||||||||
|
Destination physical port group to use for traffic
classification |
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.11 |
||||||||||||
|
Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.12 |
||||||||||||
|
Source MAC address to use for traffic classification
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.13 |
||||||||||||
|
Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.14 |
||||||||||||
|
Source MAC mask to use for traffic classification
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.15 |
||||||||||||
|
Source MAC group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.16 |
||||||||||||
|
Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.17 |
||||||||||||
|
Destination MAC address to use for traffic classification
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.18 |
||||||||||||
|
Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.19 |
||||||||||||
|
Destination MAC mask to use for traffic classification
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.20 |
||||||||||||
|
Destination MAC group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.21 |
||||||||||||
|
Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.22 |
||||||||||||
|
Source VLAN to use for traffic classification
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.23 |
||||||||||||
|
Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.24 |
||||||||||||
|
Destination VLAN to use for traffic classification
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.25 |
||||||||||||
|
Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.26 |
||||||||||||
|
802.1p value to use for traffic classification
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.27 |
||||||||||||
|
Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.28 |
||||||||||||
|
Source IP address to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.29 |
||||||||||||
|
Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.30 |
||||||||||||
|
Source IP mask to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.31 |
||||||||||||
|
Source network group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.32 |
||||||||||||
|
Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.33 |
||||||||||||
|
Destination IP address to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.34 |
||||||||||||
|
Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.35 |
||||||||||||
|
Destination IP mask to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.36 |
||||||||||||
|
Destination network group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.37 |
||||||||||||
|
Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.38 |
||||||||||||
|
Multicast IP address to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.39 |
||||||||||||
|
Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.40 |
||||||||||||
|
Multicast IP mask to use for traffic classification
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.41 |
||||||||||||
|
Multicast network group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.42 |
||||||||||||
|
Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.43 |
||||||||||||
|
TOS value to use for traffic classification
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.44 |
||||||||||||
|
Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.45 |
||||||||||||
|
TOS mask to use for traffic classification
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.46 |
||||||||||||
|
DSCP value to use for traffic classification
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.47 |
||||||||||||
|
Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.48 |
||||||||||||
|
DSCP mask to use for traffic classification
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.49 |
||||||||||||
|
IP protocol to use for traffic classification.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.50 |
||||||||||||
|
Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.51 |
||||||||||||
|
Source IP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.52 |
||||||||||||
|
Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.53 |
||||||||||||
|
Destination IP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.54 |
||||||||||||
|
Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.55 |
||||||||||||
|
Name of service to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.56 |
||||||||||||
|
Status field indicating whether the service
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.57 |
||||||||||||
|
Name of service group to use for traffic classification
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.58 |
||||||||||||
|
Status field indicating whether the service group
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.59 |
||||||||||||
|
ICMP type to use for traffic classification
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.60 |
||||||||||||
|
Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.61 |
||||||||||||
|
ICMP code to use for traffic classification
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.62 |
||||||||||||
|
Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.63 |
||||||||||||
|
Used to create/delete conditions according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.64 |
||||||||||||
|
Source physical port range end to use for traffic
classification. Must be greater than port range start to indicate a range. When '1', use source port as a single port. |
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.65 |
||||||||||||
|
Destination physical port range end to use for traffic
classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port. |
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.66 |
||||||||||||
|
Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.67 |
||||||||||||
|
Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.68 |
||||||||||||
|
Source TCP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.69 |
||||||||||||
|
Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.70 |
||||||||||||
|
Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.71 |
||||||||||||
|
Destination TCP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.72 |
||||||||||||
|
Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.73 |
||||||||||||
|
Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.74 |
||||||||||||
|
Source UDP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.75 |
||||||||||||
|
Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.76 |
||||||||||||
|
Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.77 |
||||||||||||
|
Destination UDP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.78 |
||||||||||||
|
Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.79 |
||||||||||||
|
Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.80 |
||||||||||||
|
Ethertype value to use for traffic classification
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.81 |
||||||||||||
|
Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.82 |
||||||||||||
|
Use any/all specifieid TCP flags for traffic classification
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.83 |
||||||||||||
|
Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.84 |
||||||||||||
|
TCP flags values used for traffic classification
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.85 |
||||||||||||
|
Not used
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.86 |
||||||||||||
|
Mask of TCP flags bits used for traffic classification
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.87 |
||||||||||||
|
Not used
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.88 |
||||||||||||
|
Look for established TCP sessions in classification
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.89 |
||||||||||||
|
Source IPv6 address to use for traffic classification
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.90 |
||||||||||||
|
Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.91 |
||||||||||||
|
Source IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.92 |
||||||||||||
|
Destination IPv6 address to use for traffic classification
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.93 |
||||||||||||
|
Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.94 |
||||||||||||
|
Destination IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.95 |
||||||||||||
|
classify IPV6 traffic
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.96 |
||||||||||||
|
NH value to use for traffic classification
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.97 |
||||||||||||
|
Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.98 |
||||||||||||
|
FL value to use for traffic classification
|
Integer32 Constraints: range: 0-1048575 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.99 |
||||||||||||
|
Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.100 |
||||||||||||
|
Multicast IPv6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.101 |
||||||||||||
|
Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.102 |
||||||||||||
|
Multicast IPv6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.103 |
||||||||||||
|
DSCP value to use for traffic classification
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.104 |
||||||||||||
|
Customer VLAN to use for traffic classification
|
Integer32 Constraints: range: 0-4095 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.105 |
||||||||||||
|
Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.106 |
||||||||||||
|
Customer 802.1p to use for traffic classification
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.107 |
||||||||||||
|
Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.108 |
||||||||||||
|
Name of Vrf to match traffic in
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.109 |
||||||||||||
|
Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.110 |
||||||||||||
|
TCP packet fragments
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.111 |
||||||||||||
|
Source physical chassis used for traffic classification.
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.112 |
||||||||||||
|
Destination physical chassis used for traffic classification.
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.113 |
||||||||||||
|
Application Fingerprinting group.
|
OctetStringr/w Constraints: range: 1-24 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.114 |
||||||||||||
|
Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.115 |
||||||||||||
|
SIP type to use for traffic classification
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.116 |
||||||||||||
|
SIP Status field indicates whether SIP is enabled or disabled
for traffic classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.117 |
||||||||||||
|
DPI Application Member.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.118 |
||||||||||||
|
DPI Application Member Type.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.119 |
||||||||||||
|
DPI Status field indicates whether DPI Application name is enabled or disabled
for traffic classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.120 |
||||||||||||
|
DPI Status field indicates whether DPI Application group is enabled or disabled
for traffic classification |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.121 |
||||||||||||
|
Vni value associated with this vxlan
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.122 |
||||||||||||
|
Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.123 |
||||||||||||
| SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.124 |
|||||||||||||
|
Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.125 |
||||||||||||
|
Source MAC address to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.126 |
||||||||||||
|
Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.127 |
||||||||||||
|
Source MAC address to use for traffic classification
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.128 |
||||||||||||
|
Source IP address to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.129 |
||||||||||||
|
Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.130 |
||||||||||||
|
Source IP mask to use for traffic classification
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.131 |
||||||||||||
|
Source IPV6 address to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.132 |
||||||||||||
|
Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.133 |
||||||||||||
|
Source IPV6 mask to use for traffic classification
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.134 |
||||||||||||
|
IP protocol to use for traffic classification.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.135 |
||||||||||||
|
Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.136 |
||||||||||||
|
Source IP port to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.137 |
||||||||||||
|
Status field indicating whether the source port
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.138 |
||||||||||||
|
Destination port to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.139 |
||||||||||||
|
Status field indicating whether the destination port
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.140 |
||||||||||||
|
Status field indicating vxlan configuration.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.141 |
||||||||||||
|
Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.142 |
||||||||||||
|
Status field indicating whether the source physical port splitGroup
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.143 |
alaQoSServiceTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5
·
1 row entry
·
22 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSServiceTable'
Table of QoS Service definitions
Definition of QoS Service
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of the service
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.1 |
||||||||||||
|
What entity created the service.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.2 |
||||||||||||
|
protocol field for Service
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.3 |
||||||||||||
|
Source IP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.4 |
||||||||||||
|
Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.5 |
||||||||||||
|
Destination IP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.6 |
||||||||||||
|
Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.7 |
||||||||||||
|
Used to create/delete services according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.8 |
||||||||||||
|
Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.9 |
||||||||||||
|
Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.10 |
||||||||||||
|
Source TCP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.11 |
||||||||||||
|
Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.12 |
||||||||||||
|
Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.13 |
||||||||||||
|
Destination TCP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.14 |
||||||||||||
|
Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.15 |
||||||||||||
|
Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.16 |
||||||||||||
|
Source UDP port range start to use for traffic classification.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.17 |
||||||||||||
|
Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.18 |
||||||||||||
|
Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.19 |
||||||||||||
|
Destination UDP port range start to use for traffic
classification. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.20 |
||||||||||||
|
Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.21 |
||||||||||||
|
Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.22 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6
·
1 row entry
·
22 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedServiceTable'
Table of QoS AppliedService definitions
Definition of QoS AppliedService
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of the service
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.1 |
||||||||||||
|
What entity created the service.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.2 |
||||||||||||
|
protocol field for AppliedService
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.3 |
||||||||||||
|
Source IP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.4 |
||||||||||||
|
Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.5 |
||||||||||||
|
Destination IP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.6 |
||||||||||||
|
Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.7 |
||||||||||||
|
Used to create/delete services according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.8 |
||||||||||||
|
Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.9 |
||||||||||||
|
Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a single IP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.10 |
||||||||||||
|
Source TCP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.11 |
||||||||||||
|
Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.12 |
||||||||||||
|
Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.13 |
||||||||||||
|
Destination TCP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.14 |
||||||||||||
|
Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.15 |
||||||||||||
|
Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port as a single TCP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.16 |
||||||||||||
|
Source UDP port range start to use for traffic classification.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.17 |
||||||||||||
|
Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.18 |
||||||||||||
|
Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.19 |
||||||||||||
|
Destination UDP port range start to use for traffic
classification. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.20 |
||||||||||||
|
Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.21 |
||||||||||||
|
Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port as a single UDP port. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.22 |
alaQoSServiceGroupsTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSServiceGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSServiceGroupsTable'
Table of QoS ServiceGroups definitions
Definition of QoS ServiceGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of service group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.1 |
||||||||||||
|
What entity created the service group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.2 |
||||||||||||
|
Used to create/delete service groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.3 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedServiceGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedServiceGroupsTable'
Table of QoS AppliedServiceGroups definitions
Definition of QoS AppliedServiceGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of service group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.1 |
||||||||||||
|
What entity created the service group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.2 |
||||||||||||
|
Used to create/delete service groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.3 |
alaQoSServiceGroupTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9
·
1 row entry
·
2 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSServiceGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSServiceGroupTable'
Table of QoS ServiceGroup definitions
Definition of QoS ServiceGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of service in service group entry
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.1 |
||||||||||||
|
Used to create/delete service group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.2 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10
·
1 row entry
·
2 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedServiceGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedServiceGroupTable'
Table of QoS AppliedServiceGroup definitions
Definition of QoS AppliedServiceGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of service in service group entry
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.1 |
||||||||||||
|
Used to create/delete service group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.2 |
alaQoSNetworkGroupsTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSNetworkGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSNetworkGroupsTable'
Table of QoS NetworkGroups definitions
Definition of QoS NetworkGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of network group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.1 |
||||||||||||
|
What entity created the network group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.2 |
||||||||||||
|
Used to create/delete network groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.3 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedNetworkGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedNetworkGroupsTable'
Table of QoS AppliedNetworkGroups definitions
Definition of QoS AppliedNetworkGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of network group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.1 |
||||||||||||
|
What entity created the network group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.2 |
||||||||||||
|
Used to create/delete network groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.3 |
alaQoSNetworkGroupTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSNetworkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSNetworkGroupTable'
Table of QoS NetworkGroup definitions
Definition of QoS NetworkGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IP address for network group entry.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.1 |
||||||||||||
|
IP mask for network group entry.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.2 |
||||||||||||
|
Used to create/delete network group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.3 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedNetworkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedNetworkGroupTable'
Table of QoS AppliedNetworkGroup definitions
Definition of QoS AppliedNetworkGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IP address for network group entry.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.1 |
||||||||||||
|
IP mask for network group entry.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.2 |
||||||||||||
|
Used to create/delete network group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.3 |
alaQoSMACGroupsTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSMACGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSMACGroupsTable'
Table of QoS MACGroups definitions
Definition of QoS MACGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of MAC group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.1 |
||||||||||||
|
What entity created the MAC group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.2 |
||||||||||||
|
Used to create/delete MAC groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.3 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedMACGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedMACGroupsTable'
Table of QoS AppliedMACGroups definitions
Definition of QoS AppliedMACGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of MAC group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.1 |
||||||||||||
|
What entity created the MAC group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.2 |
||||||||||||
|
Used to create/delete MAC groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.3 |
alaQoSMACGroupTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSMACGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSMACGroupTable'
Table of QoS MACGroup definitions
Definition of QoS MACGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAC address for MAC group entry
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.1 |
||||||||||||
|
MAC mask for MAC group entry
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.2 |
||||||||||||
|
Used to create/delete MAC group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.3 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedMACGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedMACGroupTable'
Table of QoS AppliedMACGroup definitions
Definition of QoS AppliedMACGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAC address for MAC group entry
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.1 |
||||||||||||
|
MAC mask for MAC group entry
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.2 |
||||||||||||
|
Used to create/delete MAC group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.3 |
alaQoSPortGroupsTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSPortGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSPortGroupsTable'
Table of QoS PortGroups definitions
Definition of QoS PortGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of port group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.1 |
||||||||||||
|
What entity created the port group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.2 |
||||||||||||
|
Used to create/delete port groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.3 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedPortGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedPortGroupsTable'
Table of QoS AppliedPortGroups definitions
Definition of QoS AppliedPortGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of port group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.1 |
||||||||||||
|
What entity created the port group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.2 |
||||||||||||
|
Used to create/delete port groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.3 |
alaQoSPortGroupTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSPortGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSPortGroupTable'
Table of QoS PortGroup definitions
Definition of QoS PortGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Physical slot for port group entry.
If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum. |
Integer32 Constraints: range: 0-6016 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.1 |
||||||||||||
|
Physical port range start for port group entry
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.2 |
||||||||||||
|
Used to create/delete port group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.3 |
||||||||||||
|
Physical port range end for port group entry
Must be greater than port range start to indicate a range. When '1', use port as a single port. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedPortGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedPortGroupTable'
Table of QoS AppliedPortGroup definitions
Definition of QoS AppliedPortGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Physical slot for port group entry
If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum. |
Integer32 Constraints: range: 1-6016 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.1 |
||||||||||||
|
Physical port range start for port group entry
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.2 |
||||||||||||
|
Used to create/delete port group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.3 |
||||||||||||
|
Physical port range end for port group entry
Must be greater than port range start to indicate a range. When '1', use port as a single port. |
Integer32 Constraints: range: 0-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.4 |
alaQoSMapGroupsTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSMapGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSMapGroupsTable'
Table of QoS MapGroups definitions
Definition of QoS MapGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of map group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.1 |
||||||||||||
|
What entity created the map group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.2 |
||||||||||||
|
Used to create/delete map groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.3 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedMapGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedMapGroupsTable'
Table of QoS AppliedMapGroups definitions
Definition of QoS AppliedMapGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of map group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.1 |
||||||||||||
|
What entity created the map group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.2 |
||||||||||||
|
Used to create/delete map groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.3 |
alaQoSMapGroupTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSMapGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSMapGroupTable'
Table of QoS MapGroup definitions
Definition of QoS MapGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Key range start of map group entry.
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.1 |
||||||||||||
|
Key range end for map group entries. Key range end
must be greater than key range start to indicate a range. When '0', use key range start as a single key. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.2 |
||||||||||||
|
Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.3 |
||||||||||||
|
Used to create/delete map group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedMapGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedMapGroupTable'
Table of QoS AppliedMapGroup definitions
Definition of QoS AppliedMapGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Key range start of map group entry.
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.1 |
||||||||||||
|
Key range end for map group entries. Key range end
must be greater than key range start to indicate a range. When '0', use key range start as a single key. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.2 |
||||||||||||
|
Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen. |
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.3 |
||||||||||||
|
Used to create/delete map group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.4 |
alaQoSActionTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27
·
1 row entry
·
61 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSActionTable'
Table of QoS Action definitions
Definition of QoS Action
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of action
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.1 |
||||||||||||
|
What entity created the action.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.2 |
||||||||||||
|
Disposition of traffic using the action.
Use to filter out unwanted traffic. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.3 |
||||||||||||
|
Maximum bandwidth (Kbits/sec) allowed for traffic
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.4 |
||||||||||||
|
Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.5 |
||||||||||||
|
Internal and queueing priority to use for traffic.
|
Integer32r/w Constraints: range: 0-12 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.6 |
||||||||||||
|
Status field indicating whether priority
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.7 |
||||||||||||
|
When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses the same action. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.8 |
||||||||||||
|
Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.9 |
||||||||||||
|
Status field indicating whether maximum depth
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.10 |
||||||||||||
|
802.1p value to stamp on traffic.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.11 |
||||||||||||
|
Status field indicating whether 802.1p
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.12 |
||||||||||||
|
TOS value to stamp on traffic. (High 3 bits of TOS byte)
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.13 |
||||||||||||
|
Status field indicating whether TOS
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.14 |
||||||||||||
|
TOS value to stamp on traffic. (High 6 bits of TOS byte)
|
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.15 |
||||||||||||
|
Status field indicating whether DSCP
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.16 |
||||||||||||
|
What field to use as key for mapping 802.1p/TOS/DSCP priorities
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.17 |
||||||||||||
|
What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.18 |
||||||||||||
|
Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities. |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.19 |
||||||||||||
|
Status field indicating whether a map group
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.20 |
||||||||||||
|
Name of load balance group to use for traffic
|
OctetStringr/w Constraints: range: 0-23 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.21 |
||||||||||||
|
Status field indicating whether load balanace group
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.22 |
||||||||||||
|
Next hop gateway to use for traffic
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.23 |
||||||||||||
|
Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.24 |
||||||||||||
|
Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.25 |
||||||||||||
|
Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.26 |
||||||||||||
|
Used to create/delete actions according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.27 |
||||||||||||
|
When enabled, don't make hardware entries for matching flows.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.28 |
||||||||||||
|
When enabled, disable the physical source port of the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.29 |
||||||||||||
|
Destination physical slot for redirected traffic
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.30 |
||||||||||||
|
Status for alaQoSActionRedirectSlotStatus field
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.31 |
||||||||||||
|
Destination physical port for redirected traffic
|
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.32 |
||||||||||||
|
Destination linkagg for redirected traffic
|
Integer32r/w Constraints: range: 0-128 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.33 |
||||||||||||
|
Status for alaQoSActionRedirectAggStatus field
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.34 |
||||||||||||
|
Destination physical slot for mirrored traffic
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.35 |
||||||||||||
|
Destination physical port for mirrored traffic
|
Integer32r/w Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.36 |
||||||||||||
|
Mirroring mode
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.37 |
||||||||||||
|
Status for alaQoSActionMirrorMode field
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.38 |
||||||||||||
|
Committed Information Rate - bandwidth values in kilobits per second.
|
kilobits per secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.39 |
||||||||||||
|
Status field indicating whether CIR value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.40 |
||||||||||||
|
Committed Burst Size - bucket size in byte.
|
Integer32r/w Constraints: range: 0-2147450880 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.41 |
||||||||||||
|
Status field indicating whether CBS value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.42 |
||||||||||||
|
Peak Information Rate - bandwidth values in kilobits per second.
|
kilobits per secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.43 |
||||||||||||
|
Status field indicating whether PIR value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.44 |
||||||||||||
|
Peak Burst Size - bucket size in byte.
|
Integer32r/w Constraints: range: 0-2147450880 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.45 |
||||||||||||
|
Status field indicating whether PBS value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.46 |
||||||||||||
|
Priority for CPU messages.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.47 |
||||||||||||
|
Status field indicating whether CPU Priority value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.48 |
||||||||||||
|
only color red traffic
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.49 |
||||||||||||
|
Destination physical chassis for redirected traffic
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.50 |
||||||||||||
|
Destination physical chassis for mirrored traffic
|
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.51 |
||||||||||||
|
Next hop gateway to use for IPv6 traffic
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.52 |
||||||||||||
|
Status field indicating whether permanent gateway IPv6 address
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.53 |
||||||||||||
|
Ipv6IfIndex for link-local address, else 0.
|
IPV6-TCIpv6IfIndexOrZeror/w Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.54 |
||||||||||||
|
RTCP Monitor status for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.55 |
||||||||||||
|
Status of the RTCP Monitor field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.56 |
||||||||||||
|
RTCP DSCP number for the traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.57 |
||||||||||||
|
Status of the RTCP DSCP field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.58 |
||||||||||||
|
Trust DSCP status for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.59 |
||||||||||||
|
Status of the Trust DSCP field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.60 |
||||||||||||
|
Object to configure action on HTTP port for Access-Guardian
Restricted Role configuration. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.61 |
alaQoSAppliedActionTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28
·
1 row entry
·
60 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedActionTable'
Table of QoS AppliedAction definitions
Definition of QoS AppliedAction
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of action
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.1 |
||||||||||||
|
What entity created the action.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.2 |
||||||||||||
|
Disposition of traffic using the action.
Use to filter out unwanted traffic. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.3 |
||||||||||||
|
Maximum bandwidth (Kbits/sec) allowed for traffic
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.4 |
||||||||||||
|
Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.5 |
||||||||||||
|
Internal and queueing priority to use for traffic.
|
Integer32 Constraints: range: 0-12 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.6 |
||||||||||||
|
Status field indicating whether priority
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.7 |
||||||||||||
|
When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses the same action. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.8 |
||||||||||||
|
Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.9 |
||||||||||||
|
Status field indicating whether maximum depth
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.10 |
||||||||||||
|
802.1p value to stamp on traffic.
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.11 |
||||||||||||
|
Status field indicating whether 802.1p
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.12 |
||||||||||||
|
TOS value to stamp on traffic. (High 3 bits of TOS byte)
|
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.13 |
||||||||||||
|
Status field indicating whether TOS
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.14 |
||||||||||||
|
TOS value to stamp on traffic. (High 6 bits of TOS byte)
|
Integer32 Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.15 |
||||||||||||
|
Status field indicating whether DSCP
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.16 |
||||||||||||
|
What field to use as key for mapping 802.1p/TOS/DSCP priorities
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.17 |
||||||||||||
|
What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.18 |
||||||||||||
|
Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities. |
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.19 |
||||||||||||
|
Status field indicating whether a map group
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.20 |
||||||||||||
|
Name of load balance group to use for traffic
|
OctetString Constraints: range: 0-23 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.21 |
||||||||||||
|
Status field indicating whether load balanace group
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.22 |
||||||||||||
|
Next hop gateway to use for traffic
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.23 |
||||||||||||
|
Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.24 |
||||||||||||
|
Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.25 |
||||||||||||
|
Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.26 |
||||||||||||
|
Used to create/delete actions according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.27 |
||||||||||||
|
When enabled, don't make hardware entries for matching flows.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.28 |
||||||||||||
|
When enabled, disable the physical source port of the traffic.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.29 |
||||||||||||
|
Destination physical slot for redirected traffic
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.30 |
||||||||||||
|
Status for alaQoSAppliedActionRedirectSlotStatus field
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.31 |
||||||||||||
|
Destination physical port for redirected traffic
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.32 |
||||||||||||
|
Destination linkagg for redirected traffic
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.33 |
||||||||||||
|
Status for alaQoSAppliedActionRedirectAggStatus field
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.34 |
||||||||||||
|
Destination physical slot for mirrored traffic
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.35 |
||||||||||||
|
Destination physical port for mirrored traffic
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.36 |
||||||||||||
|
Mirroring mode
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.37 |
||||||||||||
|
Status for alaQoSAppliedActionMirrorMode field
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.38 |
||||||||||||
|
Committed Information Rate - bandwidth values in kilobits per second.
|
kilobits per secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.39 |
||||||||||||
|
Status field indicating whether CIR value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.40 |
||||||||||||
|
Committed Burst Size - bucket size in byte.
|
Integer32r/w Constraints: range: 0-2147450880 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.41 |
||||||||||||
|
Status field indicating whether CBS value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.42 |
||||||||||||
|
Peak Information Rate - bandwidth values in kilobits per second.
|
kilobits per secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.43 |
||||||||||||
|
Status field indicating whether PIR value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.44 |
||||||||||||
|
Peak Burst Size - bucket size in byte.
|
Integer32r/w Constraints: range: 0-2147450880 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.45 |
||||||||||||
|
Status field indicating whether PBS value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.46 |
||||||||||||
|
Priority for CPU messages.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.47 |
||||||||||||
|
Status field indicating whether CPU Priority value is specified(enabled)
or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.48 |
||||||||||||
|
only color red traffic
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.49 |
||||||||||||
|
Destination physical chassis for redirected traffic
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.50 |
||||||||||||
|
Destination physical chassis for mirrored traffic
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.51 |
||||||||||||
|
Next hop gateway to use for IPv6 traffic
|
IPV6-TCIpv6Addressr/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.52 |
||||||||||||
|
Status field indicating whether permanent gateway IPv6 address
is specified(enabled) or not(disabled). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.53 |
||||||||||||
|
Ipv6IfIndex for link-local address, else 0.
|
IPV6-TCIpv6IfIndexOrZeror/w Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.54 |
||||||||||||
|
RTCP Monitor status for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.55 |
||||||||||||
|
Status of the RTCP Monitor field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.56 |
||||||||||||
|
RTCP DSCP number for the traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.57 |
||||||||||||
|
Status of the RTCP DSCP field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.58 |
||||||||||||
|
Trust DSCP status for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.59 |
||||||||||||
|
Status of the Trust DSCP field for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.60 |
alaQoSPortTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29
·
1 row entry
·
20 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSPortTable'
Table of QoS Port definitions
Definition of QoS Port
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Physical slot port resides on
If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum. |
Integer32 Constraints: range: 0-6016 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.1 |
||||||||||||||||||
|
Physical port number
|
Integer32 Constraints: range: 0-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.2 |
||||||||||||||||||
|
The type of interface QoS matches for this physical port
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.3 |
||||||||||||||||||
|
Status of trusting 802.1p/TOS/DSCP values.
When trusted, 802.1p/DSCP values in the packet are passed through the switch. When untrusted, 802.1p/DSCP values are set to the port defaults. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.4 |
||||||||||||||||||
|
802.1p priority value to use for untagged frames arriving on
the port and tagged frames when the port is untrusted. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.5 |
||||||||||||||||||
|
DSCP value to stamp in frames arriving on the port when the port
is untrusted |
Integer32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.6 |
||||||||||||||||||
|
Maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.7 |
||||||||||||||||||
|
Status field indicating whether to enforce
maximum depth on this port |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.8 |
||||||||||||||||||
|
Reset all QoS parameters to default values
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.9 |
||||||||||||||||||
|
Physical bandwidth of port (Kbit/sec)
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.10 |
||||||||||||||||||
|
Used to create/delete ports according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.11 |
||||||||||||||||||
|
Ingress traffic classification parameter for Firenze port
What field to interpret as priority for WRED |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.12 |
||||||||||||||||||
|
Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this port |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.13 |
||||||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.14 |
||||||||||||||||||
|
Maximum igress bandwidth (Kbits/sec).
Maximum rate to recieve traffic in on this port |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.15 |
||||||||||||||||||
|
Status field indicating whether to enforce
maximum bandwidth on port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.16 |
||||||||||||||||||
|
Maximum depth of ingress queues (Kbytes).
Maximum depth of queues on this port |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.17 |
||||||||||||||||||
|
Status field indicating whether to enforce
maximum depth on this port |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.18 |
||||||||||||||||||
|
This object specifies if, in egress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in egress … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.19 |
||||||||||||||||||
|
This object specifies if, in ingress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -- the DEI/CFI bit will be set in ingres… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.20 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32
·
1 row entry
·
13 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSValidityPeriodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSValidityPeriodTable'
Table of QoS ValidityPeriod definitions
Definition of QoS ValidityPeriod
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of validity period
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.1 |
||||||||||||
|
What entity created the validity period.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.2 |
||||||||||||
|
Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday is most significant. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.3 |
||||||||||||
|
Status field indicating whether the validity period
has specific active days of the month. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.4 |
||||||||||||
|
Bitfield for each month this validity period
is active. January is least significant. Decemeber is most significant. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.5 |
||||||||||||
|
Status field indicating whether the validity period
has specific active days of the week. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.6 |
||||||||||||
|
Time of day this period becomes active.
Format is 'hh:mm' |
OctetStringr/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.7 |
||||||||||||
|
Status field indicating whether the validity period
has specific active hours of the day. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.8 |
||||||||||||
|
Time of day this period becomes inactive.
Format is 'hh:mm' |
OctetStringr/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.9 |
||||||||||||
|
Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm' |
OctetStringr/w Constraints: range: 0-19 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.10 |
||||||||||||
|
Status field indicating whether the validity period
has a specific active date-time interval. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.11 |
||||||||||||
|
Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm' |
OctetStringr/w Constraints: range: 0-19 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.12 |
||||||||||||
|
Used to create/delete validity periods according
to the RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.13 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33
·
1 row entry
·
13 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedValidityPeriodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedValidityPeriodTable'
Table of QoS AppliedValidityPeriod definitions
Definition of QoS AppliedValidityPeriod
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of validity period
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.1 |
||||||||||||
|
What entity created the validity period.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.2 |
||||||||||||
|
Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday is most significant. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.3 |
||||||||||||
|
Status field indicating whether the validity period
has specific active days of the month. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.4 |
||||||||||||
|
Bitfield for each month this validity period
is active. January is least significant. Decemeber is most significant. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.5 |
||||||||||||
|
Status field indicating whether the validity period
has specific active days of the week. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.6 |
||||||||||||
|
Time of day this period becomes active.
Format is 'hh:mm' |
OctetString Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.7 |
||||||||||||
|
Status field indicating whether the validity period
has specific active hours of the day. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.8 |
||||||||||||
|
Time of day this period becomes inactive.
Format is 'hh:mm' |
OctetString Constraints: range: 0-7 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.9 |
||||||||||||
|
Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm' |
OctetString Constraints: range: 0-19 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.10 |
||||||||||||
|
Status field indicating whether the validity period
has a specific active date-time interval. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.11 |
||||||||||||
|
Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm' |
OctetString Constraints: range: 0-19 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.12 |
||||||||||||
|
Used to create/delete validity periods according
to the RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.13 |
alaQoSRuleGroupsTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSRuleGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSRuleGroupsTable'
Table of QoS RuleGroups definitions
Definition of QoS RuleGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.1 |
||||||||||||
|
What entity created the rule group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.2 |
||||||||||||
|
Type of rule group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.3 |
||||||||||||
|
Is this rule grop enabled or not
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.4 |
||||||||||||
|
Used to create/delete rule groups according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.5 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedRuleGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedRuleGroupsTable'
Table of QoS AppliedRuleGroups definitions
Definition of QoS AppliedRuleGroups
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule group
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.1 |
||||||||||||
|
What entity created the service group.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.2 |
||||||||||||
|
What entity created the rule group.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.3 |
||||||||||||
|
Is this rule grop enabled or not
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.4 |
||||||||||||
|
Used to create/delete rule groups according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.5 |
alaQoSRuleGroupTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36
·
1 row entry
·
6 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSRuleGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSRuleGroupTable'
Table of QoS RuleGroup definitions
Definition of QoS RuleGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule in rule group entry
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.1 |
||||||||||||
|
Number of times this rule has been matched.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.2 |
||||||||||||
|
Which rule statistics counters to update if not all are available
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.3 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.4 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.5 |
||||||||||||
|
Used to create/delete rule group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.6 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37
·
1 row entry
·
6 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedRuleGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedRuleGroupTable'
Table of QoS AppliedRuleGroup definitions
Definition of QoS AppliedRuleGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of rule in rule group entry
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.1 |
||||||||||||
|
Number of times this rule has been matched.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.2 |
||||||||||||
|
Which rule statistics counters to update if not all are available
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.3 |
||||||||||||
|
Counter for packets patching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.4 |
||||||||||||
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.5 |
||||||||||||
|
Used to create/delete rule group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.6 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSV6NetworkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSV6NetworkGroupTable'
Table of QoS V6NetworkGroup definitions
Definition of QoS NetworkGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IP address for network group entry.
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.1 |
||||||||||||
|
IP mask for network group entry.
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.2 |
||||||||||||
|
Used to create/delete network group entries according to the
RowStatus convention |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.3 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAppliedV6NetworkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAppliedV6NetworkGroupTable'
Table of QoS AppliedNetworkGroup definitions
Definition of QoS AppliedNetworkGroup
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
IP address for network group entry.
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.1 |
||||||||||||
|
IP mask for network group entry.
|
IPV6-TCIpv6Address Type Constraints: range: 16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.2 |
||||||||||||
|
Used to create/delete network group entries according to the
RowStatus convention |
SNMPv2-TCRowStatus Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.3 |
alaQoSDSCPTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSDSCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSDSCPTable'
Table of QoS Condition definitions
Definition of QoS DSCP
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
DSCP Entry number for the traffic.
|
Integer32 Constraints: range: 1-5000 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.1 |
||||||||||||
|
DSCP priority for the traffic.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.2 |
||||||||||||
|
DSCP drop precedence for the traffic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.3 |
||||||||||||
|
RowStatus entry for QoS DSCP.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.4 |
alaQoSAutoMacRangeTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSAutoMacRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSAutoMacRangeTable'
Table of QoS Auto Mac ranges
Definition of QoS Auto Mac Range
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index to the Mac range table.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.1 |
|
specifies the starting mac-address of the default mac-range
which is supported by qos auto phones. |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.2 |
|
specifies the end mac-address of the default mac-range
which is supported by qos auto phones. |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.3 |
alaQoSExtendedRuleTable
table.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57
·
1 row entry
·
12 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSExtendedRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSExtendedRuleTable'
Table of QoS Rule definitions for extending port group behavior on individual port basis or group basis
Definition of QoS Rule
| Column | Syntax | OID |
|---|---|---|
|
Split Rule ID defined from the number of members in the group.
|
Unsigned32 Constraints: range: 1-8192 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.1 |
|
Chassis on which rate-limit is enabled.
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.2 |
|
Slot on which rate-limit is enabled.
|
Integer32 Constraints: range: 0-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.3 |
|
Port on which rate-limit is enabled.
|
Integer32 Constraints: range: 1-52 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.4 |
|
Counter for packets matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.5 |
|
Counter for bytes matching this rule
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.6 |
|
Counter for the number of packets which are green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.7 |
|
Counter for the number of packets which are yellow compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.8 |
|
Counter for the number of packets which are red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.9 |
|
Counter for the number of Bytes which are green compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.10 |
|
Counter for the number of Bytes which are yellow compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.11 |
|
Counter for the number of Bytes which are red compliant.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.12 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58
·
1 row entry
·
10 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk alaQoSIpNetworkSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-QOS-MIB::alaQoSIpNetworkSummaryTable'
Table of QoS IpNetworkSummary definitions.
Definition of QoS IpNetworkSummary.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Network Protocols as specified in condition classifier for given rule.
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.1 |
||||
|
Source Ip Address Type as specified in condition classifier for given rule.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.2 |
||||
|
Source IP address as specified in condition classifier for given rule.
|
OctetString Constraints: range: 4-4range: 16-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.3 |
||||
|
Destination Ip Address Type as specified in condition classifier for given rule.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.4 |
||||
|
Destination Ip Address as specified in condition classifier for given rule.
|
OctetString Constraints: range: 4-4range: 16-16 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.5 |
||||
|
Source Group as specified in condition classifier for given rule.
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.6 |
||||
|
Destination Group as specified in condition classifier for given rule.
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.7 |
||||
|
VRF Name as specified in condition classifier for given rule.
|
OctetString Constraints: range: 0-31 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.8 |
||||
|
The action performed when the packet hit the rule.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.9 |
||||
|
Number of packets hit the rule.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.10 |