ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
38

mirrorTable

table
.1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk mirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB::mirrorTable' 
A list of port mirroring instances.
mirrorEntry row .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1
A port mirroring entry.
Indexes
Column Syntax OID
mirrorSessionNumber
Identifies a specific port mirroring instance.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.1
mirrorMirroredIfindexdeprecated
This variable is deprecated and value will be ignored. Please use mirrorSrcTable
to configure mirrored ports.
The physical identification number for this mirroring port instance (mirrorred port).
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.2
mirrorMirroringIfindexdeprecated
The physical identification number for this mirroring port instance (mirroring port).
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.3
mirrorStatus
Whether mirroring is enabled or disabled for this port.
Prior to enabling mirroring, or at the same time all other
read write values in this table for the same row must
be set to appropriate values, or defaults will be …
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.4
mirrorUnblockedVLAN
A VLAN identifier which specifies the VLAN identifier that must remain unblocked no matter what is the output of the spanning tree algorithm.Value 0 indicates this parameter is not set
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.5
mirrorRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.6
mirrorDirectiondeprecated
This variable is deprecated and the value will be ignored.
Please use mirrorSrcTable to set the direction of mirroring.
Direction of mirroring.
Enumerationr/w
Enumerated Values:
1inport
2outport
3bidirectional
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.7
mirrorSessOperStatus
Whether mirroring session is active.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.8
mirrorTaggedVLAN
A VLAN identifier which specifies the VLAN identifier that must used to tag the mirrored packets going
out of the MTP for remote port mirroring .Value 0 indicates this parameter is not set
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.1.1.9

mirrorSrcTable

table
.1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk mirrorSrcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB::mirrorSrcTable' 
A list of port mirroring instances.
mirrorSrcEntry row .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1
A port mirroring entry.
Indexes
Column Syntax OID
mirrorSrcMirroredIf
The physical identification number for this mirroring port instance (mirrorred port).
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.1
mirrorSrcStatus
Whether mirroring is enabled or disabled for this port.
Prior to enabling mirroring, or at the same time all other
read write values in this table for the same row must
be set to appropriate values, or defaults will be …
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.2
mirrorSrcDirection
Direction of mirroring on the source port of this entry.
Enumerationr/w
Enumerated Values:
1inport
2outport
3bidirectional
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.3
mirrorSrcRowStatus
The status of this table entry.Row Status to control creation,
modification and deletion of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.4
mirrorSrcOperStatus
The mirroring operational status of this mirrored source.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.2.1.5

mirrorDstTable

table
.1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk mirrorDstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB::mirrorDstTable' 
A list of port mirroring instances.
mirrorDstEntry row .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1
A port mirroring entry.
Indexes
Column Syntax OID
mirrorDstMirroringIf
The physical identification number for this mirroring port instance (mirrorred port).
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.1
mirrorDstOperStatus
The mirroring operational status of this mirrored Destination.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.2
mirrorDstAdminStatus
The mirroring admin status of mirrored destination.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.3
mirrorDstRowStatus
The status of this table entry.Row Status to control creation,
modification and deletion of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.1.3.1.4

monitorTable

table
.1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk monitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB::monitorTable' 
A list of port monitoring instances.
monitorEntry row .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1
A port monitoring entry.
Indexes
Column Syntax OID
monitorSessionNumber
Identifies a specific port monitoring instance.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.1
monitorIfindexdeprecated
The physical identification number for this monitoring port instance.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.2
monitorFileStatus
The status of the file option of a monitoring port instance (default off)
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.3
monitorFileName
The name of the file in which the traffic will be stored (default PMONITOR.ENC).
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.4
monitorFileSize
The number of 65536 ( 64K ) bytes allowed for the file. The file contains only the last monitorFileSize bytes of the current port monitoring instance (default 65536 bytes).
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.5
monitorScreenStatus
The status of the screen option of a monitoring port instance (default off)
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.6
monitorScreenLine
The number of lines used when the screen option is activated (default 24)
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.7
monitorTrafficType
The type of traffic being monitored (default all)
Enumerationr/w
Enumerated Values:
1all
2unicast
3multicast
4broadcast
5unimulti
6unibroad
7multibroad
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.8
monitorStatus
The status of the port monitoring instance
Enumerationr/w
Enumerated Values:
1off
2on
3suspended
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.9
monitorFileOverWrite
The status of the File Over Write option of a monitoring port instance (default on)
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.10
monitorDirectiondeprecated
Direction of monitoring.
Enumerationr/w
Enumerated Values:
1inport
2outport
3bidirectional
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.11
monitorTimeout
The number of seconds allowed for this session before the session gets deleted.
(default:forever 0 second).
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.12
monitorRowStatus
The status of this table entry.
Create,Delete and Modify.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.13
monitorCaptureType
The number of bytes per packet allowed to capture .(brief: 64 bytes, full: Entire packet).
Enumerationr/w
Enumerated Values:
1brief
2full
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.1.1.14

monitorSrcTable

table
.1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk monitorSrcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB::monitorSrcTable' 
A list of port monitoring instances.
monitorSrcEntry row .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1
A port monitoring entry.
Indexes
Column Syntax OID
monitorSrcIfindex
The physical identification number for this monitoring port instance.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1.1
monitorSrcStatus
The status of the port monitoring instance
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1.2
monitorSrcDirection
Direction of monitoring.
Enumerationr/w
Enumerated Values:
1inport
2outport
3bidirectional
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1.3
monitorSrcRowStatus
The status of this table entry.
Create,Delete and Modify.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.2.2.1.4

alasFlowFsTable

table
.1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1 · 1 row entry · 1 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alasFlowFsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB::alasFlowFsTable' 
A table of the flow samplers within a device.
alasFlowFsEntry row .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1.1
Attributes of a flow sampler.
Indexes
No indexes recorded
Column Syntax OID
alasFlowFsDeleteEntry
The object is used to delete entries in the sFlowFsTable.
Only value 6 is supported.
Enumerationr/w
Enumerated Values:
1active
2notInService
6delete
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.1.1.1

alasFlowCpTable

table
.1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2 · 1 row entry · 1 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alasFlowCpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-PORT-MIRRORING-MONITORING-MIB::alasFlowCpTable' 
A table of the flow samplers within a device.
alasFlowCpEntry row .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2.1
Attributes of a flow sampler.
Indexes
No indexes recorded
Column Syntax OID
alasFlowCpDeleteEntry
The object is used to delete entries in the sFlowCpTable.
Only value 6 is supported.
Enumerationr/w
Enumerated Values:
1active
2notInService
6delete
 .1.3.6.1.4.1.6486.801.1.2.1.19.1.1.4.2.1.1