ALCATEL-ENT1-LBD-MIB Table View

A table containing LBD user port configuration information.

alaLbdPortConfigEntry row .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1

A LBD user port configuration entry.

Indexes

alaLbdPortConfigIfIndex

Column	Syntax	OID
alaLbdPortConfigIfIndex The physical identification number for this port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.1
alaLbdPortConfigLbdAdminStatus This object is used to enable or disable loopback-detection per port. The value enable(1) indicates that loopback-detection is enabled on this port. The value disable(2) indicates that loopback-detection is disabled …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.2
alaLbdPortConfigLbdOperStatus This object specifies the current operational state of the corresponding port.	AlaLbdPortConfigLbdOperStatus Type Values: 0 inactive 1 normal 2 shutdown 3 remoteShutdown	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.3
alaLbdPortConfigServiceAccessType This object specifies the type of service access port. port.	Enumerationr/w Enumerated Values: 1 normalEdge 2 serviceEdge 3 noValue	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.4
alaLbdPortAFDConfig Configuration is made by admin or auto-fabric on this interface	Enumeration Enumerated Values: 1 admin 2 autoFarbic	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.5
alaLbdPortRemoteConfigAdminStatus This object is used to enable or disable remote-origin loopback-detection per port. The value enable(1) indicates that remote loopback-detection is enabled on this port. The value disable(2) indicates that remote lo…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.6
alaLbdPortRemoteSrcMacAddr This object denotes the remote source mac address which gets populated during lbd shutdown due to remote violation.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.7
alaLbdPortRemoteBridgeID This object denotes the remote bridgeId which gets populated during lbd shutdown due to remote violation.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.8

A table containing Loop Back Detection information.

alaLbdPortStatsEntry row .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1

A LBD Statistics entry on per port.

Indexes

alaLbdPortStatsIfIndex

Column	Syntax	OID
alaLbdPortStatsIfIndex The ifindex of the port on which LBD is running.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.1
alaLbdPortNumLbdInvalidRcvd Number of Invalid packets received by a port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.2
alaLbdPortLbdSent Number of LBD packets sent by a port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.3
alaLbdPortStatsClear When this object is set to reset(1), all statistics parameters corresponding to this port gets cleared (reset).	Enumerationr/w Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.4
alaLbdPortLinkAgg Indicates whether the port is part of link aggregates. If it is then it shows the link aggregate id. If it is not then it shows -1	Integer32 Constraints: range: -1-255	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.5

A table that contains the LBD Vlan configuration Information

alaLbdVlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12.1.1

Indexes

alaLbdVlanId

Column	Syntax	OID
alaLbdVlanId This object is the VLAN ID that is enabled LBD.	Unsigned32 Constraints: range: 1-4094	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12.1.1.1
alaLbdVlanStatus The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove VLAN/VLANS to/from LBD.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12.1.1.2

A table that contains the violation of the Port/Linkagg 
and the vlan on which it got violated

alaLbdVlanViolationStatisticsEntry row .1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13.1.1

Indexes

alaLbdVlanIfindex

Column	Syntax	OID
alaLbdVlanIfindex The ifIndex component of this instance.	Unsigned32 Constraints: range: 1001-4294967295	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13.1.1.1
alaLbdViolatedVlanId The VlanId for which the current instance is in violation	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13.1.1.2