ALCATEL-ENT1-ISIS-SPB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
119

alcatelIND1IsisSpbAdjStaticTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3 · 1 row entry · 10 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbAdjStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbAdjStaticTable' 
A table containing the SPB configuration data for a neighbor.
cf. ieee8021SpbAdjStaticTable
alcatelIND1IsisSpbAdjStaticTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1
This table can be used to display the interfaces and metrics
of a neighbor bridge.
Indexes
Column Syntax OID
alcatelIND1IsisSpbAdjStaticEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.1
alcatelIND1IsisSpbAdjStaticEntryIfIndex
The System interface/index which defines this
adjacency. A value of 0 is a wildcard for any
interface on which SPB Operation is supported.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.2
alcatelIND1IsisSpbAdjStaticEntryMetric
The alcatelIND1IsisSpb metric (incremental cost) to this peer.
The contribution of this link to total path cost.
Recommended values are inversely proportional to link speed.
Range is (1..16777215) where 16777215 (0xFFFF…
AlcatelIND1IsisSpbLinkMetricr/w
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.3
alcatelIND1IsisSpbAdjStaticEntryHelloInterval
Maximum period, in seconds, between IIH PDUs.
Unsigned32r/w
Constraints:
range: 1-20000
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.4
alcatelIND1IsisSpbAdjStaticEntryHelloMultiplier
This value is multiplied by the corresponding HelloInterval
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by receivers
of hello packets from this IS
Unsigned32r/w
Constraints:
range: 2-100
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.5
alcatelIND1IsisSpbAdjStaticEntryIfAdminState
The administrative state of this interface/port.
Up is the default.
This object is persistent.
AlcatelIND1IsisSpbAdjStater/w
Type Values:
1up
2down
3testing
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.6
alcatelIND1IsisSpbAdjStaticEntryRowStatus
The object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.7
alcatelIND1IsisSpbAdjStaticEntryCircuitId
The local circuit id.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.8
alcatelIND1IsisSpbAdjStaticEntryIfOperState
The current operational state of IS-IS protocol on this
interface.
AlcatelIND1IsisSpbIfOperState
Type Values:
1unknown
2inService
3outOfService
4transition
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.9
alcatelIND1IsisSpbAdjStaticEntryAFDConfig
Configuration is made by admin or auto-fabric on
this interface
Unsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.10

alcatelIND1IsisSpbEctStaticTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4 · 1 row entry · 8 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbEctStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbEctStaticTable' 
The Equal Cost Tree (ECT)  static configuration table.
cf. ieee8021SpbEctStaticTable
alcatelIND1IsisSpbEctStaticTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1
The Equal Cost Tree static configuration Table defines the
ECT ALGORITHM for the Base VID and if SPBV is used for the SPVID.
Indexes
Column Syntax OID
alcatelIND1IsisSpbEctStaticEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.1
alcatelIND1IsisSpbEctStaticEntryBaseVid
Base VID to use for this ECT-ALGORITHM.
Traffic B-VID (SPBM) or Management VID (SPBV).
A Base VID value of 4095 is a wildcard for any Base VID
assigned to SPB operation.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.2
alcatelIND1IsisSpbEctStaticEntryEctAlgorithm
This identifies the tie-breaking algorithms used in
Shortest Path Tree computation. Values range from
00-80-c2-01 to 00-80-c2-16 for 802.1 for each
the 16 ECT behaviors.
This object is persistent.
AlcatelIND1IsisSpbEctAlgorithmr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.3
alcatelIND1IsisSpbvEctStaticEntrySpvid
If SPBV mode this is the VID originating from this bridge.
Must be set = 0 if SPVID Auto-allocation is required.
Otherwise in SPBM this is empty, should be set = 0.
This object is persistent.
r/w .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.4
alcatelIND1IsisSpbEctStaticEntryRowStatus
The object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.5
alcatelIND1IsisSpbEctStaticEntryMulticastMode
This identifies the tandem multicast-mode of this
bvlan. A value of 0 indicates (S,G) mode, while
a value of 1 indicates (*,G) mode.
AlcatelIND1IsisSpbmMulticastModer/w
Type Values:
0sgmode
1gmode
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.6
alcatelIND1IsisSpbEctStaticEntryRootBridgeSysName
Name of the root bridge. This object's value
has meaning only when the bvlan is in (*,G) mode
(e.g. alcatelIND1IsisSpbEctStaticEntryMulticastMode
is set to gmode).
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.7
alcatelIND1IsisSpbEctStaticEntryRootBridgeSysMac
Mac address of the root bridge. This object's value
has meaning only when the bvlan is in (*,G) mode
(e.g. alcatelIND1IsisSpbEctStaticEntryMulticastMode
is set to gmode).
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.8

alcatelIND1IsisSpbAdjDynamicTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5 · 1 row entry · 14 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbAdjDynamicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbAdjDynamicTable' 
The Adjacency table.
cf. ieee8021SpbAdjDynamicTable
cf. show ip isis adjacency
alcatelIND1IsisSpbAdjDynamicEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1
This table is used to determine operational
values of digests and interfaces of neighbor
bridges.
Indexes
Column Syntax OID
alcatelIND1IsisSpbAdjDynamicEntryTopIx
The ISIS Topology Index identifier to which
this instance belongs. Each Topology Index
defines logical topology and is used to
enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.1
alcatelIND1IsisSpbAdjDynamicEntryIfIndex
System interface/index which defines this
adjacency A value of 0 is a wildcard for any
interface on which SPB Operation is enabled.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.2
alcatelIND1IsisSpbAdjDynamicEntryPeerSysId
The SPB System Identifier of this peer. This
is used to identify a neighbor uniquely.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.3
alcatelIND1IsisSpbAdjDynamicEntryAdjState
The state of the adjacency.
AlcatelIND1IsisSpbAdjState
Type Values:
1up
2down
3testing
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.4
alcatelIND1IsisSpbAdjDynamicEntryAdjUpTime
The time when the adjacency last entered the up state.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.5
alcatelIND1IsisSpbAdjDynamicEntryHoldRemaining
The remaining hold time in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.6
alcatelIND1IsisSpbAdjDynamicEntryHoldTimer
The holding time in seconds for this
adjacency updated from received IIH PDUs.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.7
alcatelIND1IsisSpbAdjDynamicEntryNbrExtLocalCircuitId
The extended circuit id advertised by the peer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.8
alcatelIND1IsisSpbAdjDynamicEntryNeighPriority
Priority of the neighboring Intermediate
System for becoming the Designated
Intermediate System.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.9
alcatelIND1IsisSpbAdjDynamicEntryPeerSysName
IS-IS system name of peer. This is the ASCII
name assigned to the bridge to aid
management.
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.10
alcatelIND1IsisSpbAdjDynamicEntryRestartStatus
The graceful restart status of the
adjacency.
Enumeration
Enumerated Values:
1notHelping
2restarting
3restartComplete
4helping
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.11
alcatelIND1IsisSpbAdjDynamicEntryRestartSupport
Indicates whether adjacency supports ISIS
graceful restart. If 'true', the adjacency
supports graceful restart.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.12
alcatelIND1IsisSpbAdjDynamicEntryRestartSuppressed
Indicates if the adjacency has requested this
router to suppress advertisement of the
adjacency in this router's LSPs. If 'true'
the adjacency has requested to suppress
advertisement of the LSPs.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.13
alcatelIND1IsisSpbAdjDynamicEntryAdjUpTimeStamp
The sysUpTime value when the adjacency last entered the up state.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.14

alcatelIND1IsisSpbNodeTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbNodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbNodeTable' 
The Node table.
cf. show ip isis nodes
alcatelIND1IsisSpbNodeTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1
This table can be used to display information
about known bridges.
Indexes
Column Syntax OID
alcatelIND1IsisSpbNodeTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.1
alcatelIND1IsisSpbNodeSysId
SYS ID used for all SPB instances on the bridge.
A six byte network wide unique identifier.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.2
alcatelIND1IsisSpbNodeSysName
Name to be used to refer to the SPB bridge. This is advertised
in IS-IS and used for management.
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.3
alcatelIND1IsisSpbNodeSPSourceId
The Shortest Path Source Identifier.
It is the high order 3 bytes for Group Address DA from the
bridge.
Note that only the 20 bits not including the top 4 bits are
the SPSourceID.
AlcatelIND1IsisSpbmSPsourceId
Type Constraints:
range: 3
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.4
alcatelIND1IsisSpbNodeBridgePriority
This is a 16 bit quantity which ranks the SPB Bridge
relative to others when breaking ties. This priority
is the high 16 bits of the Bridge Identifier. Its impact
depends on the tie breaking algorithm.
AlcatelIND1IsisSpbBridgePriority
Type Constraints:
range: 2
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.5

alcatelIND1IsisSpbUnicastTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbUnicastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbUnicastTable' 
The unicast table.
cf. show ip isis unicast-table
alcatelIND1IsisSpbUnicastTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1
This table can be used to display information
about unicast targets.
Indexes
Column Syntax OID
alcatelIND1IsisSpbUnicastTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.1
alcatelIND1IsisSpbUnicastBvlan
The bvlan associated with the unicast target.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.2
alcatelIND1IsisSpbUnicastSysMac
The mac address of the bridge associated with the unicast target.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.3
alcatelIND1IsisSpbUnicastSysName
Name of the bridge associated with the unicast target.
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.4
alcatelIND1IsisSpbUnicastOutboundIfIndex
Outbound interface used to reach the unicast target.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.5

alcatelIND1IsisSpbMulticastTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8 · 1 row entry · 8 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbMulticastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbMulticastTable' 
The multicast table.
cf. show ip isis multicast-table
alcatelIND1IsisSpbMulticastTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1
This table can be used to display the
multicast table for SPB
Indexes
Column Syntax OID
alcatelIND1IsisSpbMulticastTableEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.1
alcatelIND1IsisSpbMulticastTableEntryBvlan
Bvlan of the multicast entry.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.2
alcatelIND1IsisSpbMulticastTableEntryMulticastMac
Multicast destination MAC of the multicast entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.3
alcatelIND1IsisSpbMulticastTableEntryIfIndexOutbound
Outbound interface index of the multicast entry, zero means local node is multicast receiver
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.4
alcatelIND1IsisSpbMulticastTableEntrySrcMac
System MAC of the multicast source, all zero means any MAC.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.5
alcatelIND1IsisSpbMulticastTableEntryIfIndexInbound
Inbound interface index of the multicast source, zero means local node is multicast source
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.6
alcatelIND1IsisSpbMulticastTableEntrySysName
System name of multicast source
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.7
alcatelIND1IsisSpbMulticastTableEntryIsid
The service identifier, e.g. isid number of the multicast entry.
AlcatelSpbServiceIdentifier
Type Constraints:
range: 255..16777215
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.8

alcatelIND1IsisSpbLSPTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9 · 1 row entry · 14 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbLSPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbLSPTable' 
The LSP table (database).
cf. show ip isis database
alcatelIND1IsisSpbLSPEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1
Each row entry in the alcatelIND1IsisSpbLSPTable
represents an LSP in the LSP database.
Indexes
Column Syntax OID
alcatelIND1IsisSpbLSPTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.1
alcatelIND1IsisSpbLSPId
The LSP Id. The format is 6 octets of ajacency
system-id followed by 1 octet LanId and 1 octet LSP
Number.
OctetString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.2
alcatelIND1IsisSpbLSPSeq
The sequence number of an LSP. The sequence number is
a four byte quantity that represents the version of
an LSP. The higher the sequence number, the more up
to date the information. The sequence number is
always increm…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.3
alcatelIND1IsisSpbLSPChecksum
The checksum of contents of LSP from the SourceID
field in the LSP till the end. The checksum is
computed using the Fletcher checksum algorithm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.4
alcatelIND1IsisSpbLSPLifetimeRemain
Remaining lifetime of this LSP. This is a
decrementing counter that decrements in seconds.
When the remaining lifetime becomes zero, the
contents of the LSP should not be considered for SPF
calculation.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.5
alcatelIND1IsisSpbLSPVersion
The version of the ISIS protocol that generated the
LSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.6
alcatelIND1IsisSpbLSPPktType
Packet type for instance Hello PDUs, LSPs, CSNPs or
PSNPs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.7
alcatelIND1IsisSpbLSPPktVersion
The version of the ISIS protocol that generated the
Packet.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.8
alcatelIND1IsisSpbLSPMaxArea
Maximum number of areas supported by the originator
of the LSP. A value of 0 indicates a default of 3
areas.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.9
alcatelIND1IsisSpbLSPSysIdLen
The length of the system-id as used by the
originator.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.10
alcatelIND1IsisSpbLSPAttributes
Attributes associated with the LSP. These include the
attached bit, overload bit, IS type of the system
originating the LSP and the partition repair
capability. The attached bit and the overload bit are
of significance …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.11
alcatelIND1IsisSpbLSPUsedLen
The used length for the LSP. For an LSP that is not
self originated, the used length is always equal to
alloc len. For self originated LSPs, the used length
is less than or equal to the alloc len.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.12
alcatelIND1IsisSpbLSPAllocLen
The length allocated for the LSP to be stored.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.13
alcatelIND1IsisSpbLSPBuff
The LSP as it exists in the LSP database.
OctetString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.14

alcatelIND1IsisSpbMulticastSourceTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbMulticastSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbMulticastSourceTable' 
The multicast source table.
cf. show ip isis multicast-sources
alcatelIND1IsisSpbMulticastSourceEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1
This table can be used to display information
about multicast sources.
Indexes
Column Syntax OID
alcatelIND1IsisSpbMulticastSourceTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.1
alcatelIND1IsisSpbMulticastSourceSysMac
The mac address of the bridge associated with the
multicast source.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.2
alcatelIND1IsisSpbMulticastSourceBvlan
The bvlan associated with the multicast source.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.3
alcatelIND1IsisSpbMulticastSourceSysName
Name of the bridge associated with the multicast
source.
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.4
alcatelIND1IsisSpbMulticastSourceReachable
True if we have a path to the multicast source.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.5

alcatelIND1IsisSpbSpfTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11 · 1 row entry · 8 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbSpfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbSpfTable' 
The spf table.
cf. show spb isis spf
alcatelIND1IsisSpbSpfTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1
This table can be used to display reachability information
about known bridges, calculated by the Spf algorithm.
Indexes
Column Syntax OID
alcatelIND1IsisSpbSpfBvlan
The vlan to which this entry belongs.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.1
alcatelIND1IsisSpbSpfSysMac
The mac-address of the bridge identified by this entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.2
alcatelIND1IsisSpbSpfSysName
Name of the bridge identified by this entry.
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.3
alcatelIND1IsisSpbSpfIfIndex
The outgoing interface index for reaching the bridge identified by this entry.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.4
alcatelIND1IsisSpbSpfNextHopSysMac
The mac-address of the next-hop for reaching the bridge identified by this entry
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.5
alcatelIND1IsisSpbSpfNextHopSysName
Name of the next-hop bridge for reaching the bridge identified by this entry
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.6
alcatelIND1IsisSpbSpfMetric
The metric/incremental cost to reach the bridge identified by this entry.
AlcatelIND1IsisSpbLinkMetric
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.7
alcatelIND1IsisSpbSpfHopCount
The number of hops needed to reach the bridge identified by this entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.8

alcatelIND1IsisSpbMulticastSourceSpfTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbMulticastSourceSpfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbMulticastSourceSpfTable' 
The multicast source spf table.
cf. show ip isis multicast-sources-spf
alcatelIND1IsisSpbMulticastSourceSpfTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1
This table can be used to display the
spf table of multicast sources in a SPB network.
Indexes
Column Syntax OID
alcatelIND1IsisSpbMulticastSourceSpfTableEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.1
alcatelIND1IsisSpbMulticastSourceSpfTableEntryBMac
The mac address of the multicast source.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.2
alcatelIND1IsisSpbMulticastSourceSpfTableEntryBvlan
The bvlan of the multicast source spf entry.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.3
alcatelIND1IsisSpbMulticastSourceSpfTableEntryDestMac
The destination mac address of the multicast source spf entry
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.4
alcatelIND1IsisSpbMulticastSourceSpfTableEntryIfIndex
The outbound ifindex of the multicast source spf entry.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.5
alcatelIND1IsisSpbMulticastSourceSpfTableEntryNHopName
The next hop system name of the multicast source spf entry.
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.6
alcatelIND1IsisSpbMulticastSourceSpfTableEntryNHopMac
The next hop system mac of the multicast source spf entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.7
alcatelIND1IsisSpbMulticastSourceSpfTableEntryMetric
The path metric of the multicast source spf entry.
AlcatelIND1IsisSpbLinkMetric
Type Constraints:
range: 1..16777215
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.8
alcatelIND1IsisSpbMulticastSourceSpfTableEntryHopCount
The hop count of the multicast source spf entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.9

alcatelIND1IsisSpbIngressMacFilterTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbIngressMacFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbIngressMacFilterTable' 
The ingress mac filter table.
cf. show ip isis ingress-mac-filter
alcatelIND1IsisSpbIngressMacFilterEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1
The ingress mac filter table.
cf. show spb isis ingress-mac-filter
Indexes
Column Syntax OID
alcatelIND1IsisSpbIngressMacBvlan
The vlan to which this entry belongs.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.1
alcatelIND1IsisSpbIngressMacSysMac
The mac-address that identifies this entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.2
alcatelIND1IsisSpbIngressMacSysName
The name of the bridge identified by this entry.
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.3
alcatelIND1IsisSpbIngressMacIfIndex
The ifindex of this entry.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.4

alcatelIND1IsisSpbServiceTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14 · 1 row entry · 6 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1IsisSpbServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1IsisSpbServiceTable' 
The services table.
cf. show spb isis services
alcatelIND1IsisSpbServiceTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1
This table can be used to display the
local configured and dynamically learned services.
Indexes
Column Syntax OID
alcatelIND1IsisSpbServiceTableEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.1
alcatelIND1IsisSpbServiceTableEntryBvlan
Bvlan of the service.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.2
alcatelIND1IsisSpbServiceTableEntryIsid
The service identifier, e.g. isid number
AlcatelSpbServiceIdentifier
Type Constraints:
range: 255..16777215
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.3
alcatelIND1IsisSpbServiceTableEntrySysMac
System MAC of the SPB node on which the service is configured
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.4
alcatelIND1IsisSpbServiceTableEntrySysName
System name of SPB node on which the service is configured
AlcatelIND1IsisSpbSystemName
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.5
alcatelIND1IsisSpbServiceTableEntryIsidFlags
Service flags e.g. source or sink of multicast traffic
AlcatelIND1IsisSpbmIsidFlags
Type Values:
0none
1tx
2rx
3both
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.6

alcatelIND1SpbIPVPNBindTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15 · 1 row entry · 6 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1SpbIPVPNBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1SpbIPVPNBindTable' 
The table binds vrf, ISID and IP gateway together to enable
route exchange between GRM and SPB-ISIS. The exchange is bidirectional.
route-map only applies to VRF routes imported to ISIS from GRM.
There is no filter from ISIS to GRM.
cf. show spb ipvpn bind
alcatelIND1SpbIPVPNBindTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1
An Entry in the alcatelIND1SpbIPVPNBindTable
Indexes
Column Syntax OID
alcatelIND1SpbIPVPNBindTableEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.1
alcatelIND1SpbIPVPNBindVrfName
The VRF for which routes are being imported from GRM to ISIS-SPB.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.2
alcatelIND1SpbIPVPNBindIsid
The ISID to set for routes imported from GRM to ISIS-SPB.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.3
alcatelIND1SpbIPVPNBindGateway
The IP gateway to set for routes imported from GRM to ISIS-SPB.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.4
alcatelIND1SpbIPVPNBindImportRouteMap
The route-map name (or empty-string for all-routes) for routes imported from GRM to ISIS-SPB.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.5
alcatelIND1SpbIPVPNBindRowStatus
The object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.6

alcatelIND1SpbIPVPNRouteTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16 · 1 row entry · 7 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1SpbIPVPNRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1SpbIPVPNRouteTable' 
The IP-VPN table of routes.
cf. show spb ipvpn route-table
alcatelIND1SpbIPVPNRouteTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1
An Entry in the alcatelIND1SpbIPVPNRouteTable
Indexes
Column Syntax OID
alcatelIND1SpbIPVPNRouteTableEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.1
alcatelIND1SpbIPVPNRouteIsid
The ISID of the IP-VPN route
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.2
alcatelIND1SpbIPVPNRoutePrefix
The destination prefix of the IP-VPN route
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.3
alcatelIND1SpbIPVPNRoutePrefixLen
The prefix length of the IP-VPN route
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.4
alcatelIND1SpbIPVPNRouteGateway
The next-hop/gateway of the IP-VPN route
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.5
alcatelIND1SpbIPVPNRouteNodeName
The BEB name of the node that advertised the IP-VPN route
OctetString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.6
alcatelIND1SpbIPVPNRouteMetric
The route-metric of the IP-VPN route
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.7

alcatelIND1SpbIPVPNRedistVrfTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1SpbIPVPNRedistVrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1SpbIPVPNRedistVrfTable' 
The IP-VPN table of configured route-redistributions where the source entity is a VRF.
cf. show spb ipvpn redist
alcatelIND1SpbIPVPNRedistVrfTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1
An Entry in the alcatelIND1SpbIPVPNRedistVrfTable
Indexes
Column Syntax OID
alcatelIND1SpbIPVPNRedistVrfTableEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.1
alcatelIND1SpbIPVPNRedistVrfSourceVrf
The source VRF from which routes are being redistributed.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.2
alcatelIND1SpbIPVPNRedistVrfDestIsid
The destination ISID to which routes are being redistributed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.3
alcatelIND1SpbIPVPNRedistVrfRouteMap
The route-map name (or empty-string for all-routes) for the filter to be applied to this route-redistribution.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.4
alcatelIND1SpbIPVPNRedistVrfRowStatus
The object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.5

alcatelIND1SpbIPVPNRedistIsidTable

table
.1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18 · 1 row entry · 5 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alcatelIND1SpbIPVPNRedistIsidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ISIS-SPB-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ISIS-SPB-MIB::alcatelIND1SpbIPVPNRedistIsidTable' 
The IP-VPN table of configured route-redistributions where the source entity is an ISID.
cf. show spb ipvpn redist
alcatelIND1SpbIPVPNRedistIsidTableEntry row .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1
An Entry in the alcatelIND1SpbIPVPNRedistIsidTable
Indexes
Column Syntax OID
alcatelIND1SpbIPVPNRedistIsidTableEntryTopIx
The ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances.
AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.1
alcatelIND1SpbIPVPNRedistIsidSourceIsid
The source ISID from which routes are being redistributed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.2
alcatelIND1SpbIPVPNRedistIsidDestIsid
The destination ISID to which routes are being redistributed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.3
alcatelIND1SpbIPVPNRedistIsidRouteMap
The route-map name (or empty-string for all-routes) for the filter to be applied to this route-redistribution.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.4
alcatelIND1SpbIPVPNRedistIsidRowStatus
The object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.5