ALCATEL-ENT1-ERP-MIB Table View

There is one ERP Ring table per bridge. It permits
the configuration of Ring.

alaErpRingEntry row .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1

The ERP Ring table entry.

Indexes

alaErpRingId

Column	Syntax	OID
alaErpRingId Ring identifier that is unique in the bridge.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.1
alaErpRingServiceVid An integer indicating the VID of Service VLAN. All the ERP control traffic will flow with Service VLAN tag across the ring. This object must be specified while creating a row in this table. Once the row has been created…	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.2
alaErpRingMEGLevel MEG level of the R-APS PDU to be inserted for this Ring. This object must be specified while creating a row in this table. Once the row has been created, the value of this object cannot be changed.	AlaErpRingMEGLevelr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.3
alaErpRingPort1 This object is the interface index of the ring port,which is either a bridge port, or an aggregated link within a bridge, on which ring is configured. There can be only two ring ports per ring in a bridge. This object m…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.4
alaErpRingPort2 This object is the interface index of the ring port,which is either a bridge port, or an aggregated link within a bridge, on which ring is configured. In case of sub-ring, this will be zero. And that is the indicator of…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.5
alaErpRingStatus An Integer value indicating the administrative state of the Ring. enabled indicates that the Ring is to function normally, and disabled that it is to cease functioning.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.6
alaErpRingState The current state of the Ring.	Enumeration Enumerated Values: 0 idle 1 protection 2 init 3 manualSwitch 4 forcedSwitch 5 pending	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.7
alaErpRingWaitToRestoreTimer This object is valid only for RPL Node. This timer is started to prevent frequent operation switch due to an intermittent defect. It may be configured by the operator in 1 minute steps betw…	Unsigned32r/w Constraints: range: 0-12	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.8
alaErpRingGuardTimer Defines the guard timer value in centiseconds. This timer is started to prevent the ring nodes from receiving outdated R-APS messages. It may be configured by the operator in 10 ms steps be…	10 millisecondsInteger32r/w Constraints: range: 1-200	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.9
alaErpRingClearStats Defines per ring clear statistics control for ERP. The value reset (1) indicates that ERP should clear all statistics related to a ring in the system.By default, this object contains a zero value.	Enumerationr/w Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.10
alaErpRingLastStateChange The time (SysUpTime) at which the ethernet ring last entered new state. : This object has been deprecated Please refer alaErpRingLastStateChangeStr.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.11
alaErpRingTimeToRevert Defines the time left to revert from Pending State to Idle State.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.12
alaErpRingRowStatus The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.13
alaErpRingVirtualChannel A Integer value indicating whether the ring is operating with the Virtual channel enabled or not.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.14
alaErpRingRevertive A Integer value indicating whether the ring is operating with the revertive mode enabled or not	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.15
alaErpRingClearAction Defines clear action for ERP ring The value reset(1) will give CLEAR action to ERP state machine	Enumerationr/w Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.16
alaErpRingActiveVersion This object indicates active ERP Ring protocol version.	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.17
alaErpRingResetVersionFallback Resets ERP running protocol	Enumerationr/w Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.18
alaErpRingLastStateChangeStr The time (SysUpTime) at which the ethernet ring last entered new state.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.19

There is one ERP Ring Port table per bridge. It permits
the configuration of Ring Ports.

alaErpRingPortEntry row .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1

The ERP Ring Port table entry.

Indexes

alaErpRingId alaErpRingPortIfIndex

Column	Syntax	OID
alaErpRingPortIfIndex This object is the interface index of the interface either a bridge port, or an aggregated link within a bridge port, to which ring port is configured. There can be only two ring ports per ring in a bridge.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.1
alaErpRingPortStatus Status of the Ring Port.	AlaErpRingPortStatus Type Values: 1 forwarding 2 blocking	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.2
alaErpRingPortType Type of the Ring Port. To configure a node as a RPL owner for the ring, this object has value of RPL(2).	AlaErpRingPortTyper/w Type Values: 1 nonRpl 2 rpl	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.3
alaErpRingPortEthOAMEvent A Boolean indicating whether ERP Ring Port shall take loss of connectivity event from Ethernet OAM. True indicates that the Ring Port is to take events from Ethernet OAM.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.4
alaErpRingPortClearStats Defines per ring port clear statistics control for ERP. The value reset (1) indicates that ERP should clear all statistics related to a ring port in the system.By default, this object contains a zero value.	Enumerationr/w Enumerated Values: 0 default 1 reset	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.5
alaErpRingPortRmepId Identifier of Remote Endpoint.	AlaErpRingMepIdr/w Type Constraints: range: 1..8191	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.6
alaErpRingPortVirtualSfMonitor A Boolean indicating whether ERP Ring Port shall take loss of connectivity event from Virtual SF monitor protocol. True indicates that the Ring Port is to take events from Virtual SF monitor.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.7

This table defines the association of VIDs and RingIds.
          
The writable objects in this table need to be persistent
upon reboot or restart of a device.

alaErpRingVlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1

The VLAN table entry.

Indexes

alaErpRingId alaErpRingVlanProtectedVid

Column	Syntax	OID
alaErpRingVlanProtectedVid An integer indicating the VID of Protected VLAN.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1.1
alaErpRingVlanRowStatus The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1.2

There is one ERP Stats table per bridge. This table
contains the statistics for the ERP on per Ring basis.

alaErpStatsEntry row .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1

The Statistics table entry.

Indexes

No indexes recorded

Column	Syntax	OID
alaErpStatsSignalFailPduTx A count of the number of R-APS (SF) PDUs transmitted on this interface for this Ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.1
alaErpStatsSignalFailPduRx A count of the number of valid R-APS (SF) PDUs received on this interface for this Ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.2
alaErpStatsSignalFailPduDrop A count of the number of valid R-APS (SF) PDUs dropped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.3
alaErpStatsNoRequestPduTx A count of the number of R-APS (NR) PDUs transmitted on this interface for this Ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.4
alaErpStatsNoRequestPduRx A count of the number of valid R-APS (NR) PDUs received on this interface for this Ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.5
alaErpStatsNoRequestPduDrop A count of the number of valid R-APS (NR) PDUs dropped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.6
alaErpStatsRPLBlockPDUTx A count of the number of R-APS (NR, RB) PDUs transmitted on this interface for this Ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.7
alaErpStatsRPLBlockPDURx A count of the number of valid R-APS (NR, RB) PDUs received on this interface for this Ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.8
alaErpStatsRPLBlockPDUDrop A count of the number of valid R-APS (NR, RB) PDUs dropped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.9
alaErpStatsPDUErr A count of the number of error R-APS PDUs received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.10