ALCATEL-ENT1-ERP-MIB

        This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
        
For the OmniSwitch Product Line
ERP Switching is protection switching mechanism for ETH Layer Ethernet Ring
topologies.
        
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
        
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
        
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
        
           Copyright (C) ALE USA Inc. 2014-2019
           Copyright (C) 1995-2013 Alcatel-Lucent
              ALL RIGHTS RESERVED WORLDWIDE
    
Source file
ALCATEL-ENT1-ERP-MIB
Last revised
Identity
alcatelENT1ERPMIB
Base OID
1.3.6.1.4.1.6486.801.1.2.1.46.1
Imported Objects
ALCATEL-ENT1-BASE softentENT1Erp
IF-MIB InterfaceIndex InterfaceIndexOrZero
Q-BRIDGE-MIB VlanId
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the alcatel-ent1 MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALCATEL-ENT1-ERP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALCATEL-ENT1-ERP-MIB::alcatelENT1ERPMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ERP-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ERP-MIB::alcatelENT1ERPMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (55)
.1.3.6.1.4.1.6486.801.1.2.1.46.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.0
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.1
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.1.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1
Integer32
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.1
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.10
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.11
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.12
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.13
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.14
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.15
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.16
Unsigned32
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.17
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.18
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.19
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.2
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.3
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.4
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.5
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.6
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.7
Unsigned32
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.8
10 millisecondsInteger32
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.9
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.2
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.3
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.4
Enumeration
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.5
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.6
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.7
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1.2
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.10
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.2
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.3
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.4
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.5
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.6
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.7
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.8
.1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.9
.1.3.6.1.4.1.6486.801.1.2.1.46.1.2
.1.3.6.1.4.1.6486.801.1.2.1.46.1.2.1
.1.3.6.1.4.1.6486.801.1.2.1.46.1.2.2
Dependencies (18) 7 direct · 11 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (4)
Unsigned32 range: 0..7
Display format: d
MEG level of the R-APS PDU to be inserted.
Unsigned32 range: 1..8191
Display format: d
Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.
Enumeration
forwarding(1)
blocking(2)
Indicates the status of the Ring Port.

forwarding(1) Status is forwarding.
blocking(2) Status is blocking.
Enumeration
nonRpl(1)
rpl(2)
Indicates the type of the Ring Port.

nonRpl(1) Port is Non-RPL Port.
rpl(2) Port is RPL Port. Node is RPL Owner for the Ring.
Compliance Statements (1)

OID .1.3.6.1.4.1.6486.801.1.2.1.46.1.2.1.1
Compliance statement for ERP.
Required groups
Notifications / Traps (3)
NameOIDDescription
.1.3.6.1.4.1.6486.801.1.2.1.46.1.0.1
The ERP Ring State has changed to Protection from Idle. Notify the user by
raising the Trap.
.1.3.6.1.4.1.6486.801.1.2.1.46.1.0.2
The trap shall be raised on RPL if there are multiple RPLs detected in the
ring. When the RPL node receives the NR (RB) message, this trap is raised.
.1.3.6.1.4.1.6486.801.1.2.1.46.1.0.3
The trap shall be raised whenever the ring is removed dynamically in
Unlike NI Scenario only.