ALCATEL-ENT1-DHCPV6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
9
Rows
9
Columns
29
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3 · 1 row entry · 1 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6RelayInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6RelayInterfaceTable'
Table controlling DHCPv6 Relay on IPv6 interfaces.
          
This table extends the corresponding IPv6 interface
entry in alaIPv6InterfaceTable.
alaDHCPv6RelayInterfaceEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3.1
An DHCPv6 relay interface entry.
Column Syntax OID
DHCPv6 administrative status on the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3.1.1
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6RelayDestinationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6RelayDestinationTable'
Table allowing the creation and removal of DHCPv6
Relay destinations for an interface.
alaDHCPv6RelayDestinationEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1
A DHCPv6 relay destination entry.
Column Syntax OID
The address type of a DHCPv6 relay destination.
Only ipv6(2) or ipv6z(4) are allowed.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.1
The IPv6 address of a DHCPv6 relay destination.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.2
Used to control the addition and removal of DHCPv6
relay destinations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.3
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1 · 1 row entry · 5 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6SrvLeaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6SrvLeaseTable'
DHCPv6 server lease table.
alaDHCPv6SrvLeaseEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1
DHCPv6 server lease entry.
Column Syntax OID
IPv6 address assigned to the client
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.1
Lease granted time for the client.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.2
Preferred Lease expiry of the client.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.3
Valid Lease expiry of the client.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.4
Type of the lease.
Enumeration
Enumerated Values:
1unavailable
2dynamic
3manual
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.5
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.7 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6GuardInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6GuardInterfaceTable'
Table to control operation of DHCPv6 Guard on a VLAN.
alaDHCPv6GuardInterfaceEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.7.1
An DHCPv6 Guard interface entry.
Column Syntax OID
DHCPv6 Guard administrative status.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.7.1.1
Used to control the addition and removal of a trusted source entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.7.1.2
Enable/Disable DHCPv6 Guard for client messages.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.7.1.3
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.8 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6GuardTrustedSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6GuardTrustedSourceTable'
Table allowing the creation and removal of trusted sources
for a IPv6 interface DHCPv6 Guard.
alaDHCPv6GuardTrustedSourceEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.8.1
An DHCPv6 Guard trusted source entry.
Column Syntax OID
The ifIndex value identifying a trusted source port or link aggregation.
AlaDHCPv6GuardTrustedSourceIfIndex
Type Constraints:
range: 1..2147483647
Description:
The ifIndex value identifying a trusted source port or link aggregation.
The ifIndex value is in network byte order.
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.8.1.1
Used to control the addition and removal of a trusted source entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.8.1.2
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.9 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6SnoopingInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6SnoopingInterfaceTable'
Table to control operation of DHCPv6 Snooping on a VLAN.
alaDHCPv6SnoopingInterfaceEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.9.1
A DHCPv6 Snooping interface entry.
Column Syntax OID
Index identifying an IPv6 index or vlan for
per-interface DHCPv6 snooping configuration. The
value 0 corresponds to the global DHCPv6
Snooping configuration.

DHCPv6 snooping does not require the presen…
IPV6-TCIpv6IfIndexOrZero
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.9.1.1
DHCPv6 Snooping administrative status.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.9.1.2
Used to control the addition and removal of an interface's
DHCPv6 Snooping configuration.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.9.1.3
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11 · 1 row entry · 8 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6BindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6BindingTable'
The DHCPv6 Snooping binding table.
alaDHCPv6BindingEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1
A DHCPv6 Snooping binding table entry.
Column Syntax OID
The ipv6IfIndex value identifying the interface on
which the client resides.

DHCPv6 snooping does not require the presence of an
IPv6 Interface on a VLAN. While this object's value
should be formed base…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1.1
The client's link-local address.
IPV6-TCIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1.2
The ifIndex of the port used to reach the client.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1.3
The global address assigned to the client by
the DHCPv6 lease.
IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1.4
The valid lifetime of the DHCPv6 lease.

A value of -1 indicates an indefinite lease. Binding
table entries that are manually added or modified will
automatically be given an indefinite lifetime.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1.5
The client's physical address.
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1.6
Was this entry dynamically learned or statically
configured?
Enumeration
Enumerated Values:
1dynamic
2static
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1.7
Used to control the addition and removal of a binding
table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.11.1.8
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.12 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6SourceFilterInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6SourceFilterInterfaceTable'
This table allows configuration of source filtering on a VLAN.
alaDHCPv6SourceFilterInterfaceEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.12.1
A DHCPv6 source filter VLAN table entry.
Column Syntax OID
Index identifying an IPv6 index or vlan for
per-interface DHCPv6 source filtering configuration.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.12.1.1
Used to control the addition and removal of source filtering interface table entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.12.1.2
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.13 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDHCPv6SourceFilterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DHCPV6-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DHCPV6-MIB::alaDHCPv6SourceFilterPortTable'
This table allows configuration of source filtering on a port or link aggregation.
alaDHCPv6SourceFilterPortEntry row .1.3.6.1.4.1.6486.801.1.2.1.29.2.1.13.1
A DHCPv6 Source Filter table interface entry.
Column Syntax OID
The ifIndex value identifying a port or link aggregation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.13.1.1
Used to control the addition and removal of source filtering port table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.29.2.1.13.1.2