ALCATEL-ENT1-DCBX-MIB
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the OmniSwitch Product Line
System Capability Manager, to allow for system control and limitation setting, of
different, features through out the system.
Capability manager is a centralized process which provides hardware information and
capability to other processes. To optimize the system performance , certain features
may be configured to a lower than the hardware limit through capability manager.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) ALE USA Inc. 2014-2019
Copyright (C) 1995-2013 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE
- Source file
ALCATEL-ENT1-DCBX-MIB- Last revised
- Identity
alcatelENT1DcbxMIB- Base OID
1.3.6.1.4.1.6486.801.1.2.1.72.1
Imported Objects
| ALCATEL-ENT1-BASE | softentENT1Dcbx |
| ALCATEL-ENT1-VIRTUAL-FLOW-CONTROL-MIB | VfcEnableState |
| IEEE8021-TC-MIB | IEEE8021PriorityValue |
| LLDP-EXT-DOT1-V2-MIB | lldpXdot1dcbxAdminApplicationPriorityAEProtocol lldpXdot1dcbxAdminApplicationPriorityAESelector LldpXdot1dcbxAppProtocol LldpXdot1dcbxAppSelector LldpXdot1dcbxSupportedCapacity LldpXdot1dcbxTrafficClassBandwidthValue LldpXdot1dcbxTrafficClassValue LldpXdot1dcbxTrafficSelectionAlgorithm |
| LLDP-V2-MIB | lldpV2LocPortIfIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the alcatel-ent1 MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ALCATEL-ENT1-DCBX-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ALCATEL-ENT1-DCBX-MIB::alcatelENT1DcbxMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DCBX-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DCBX-MIB::alcatelENT1DcbxMIB'
Objects (69)
Showing 69 of 69 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.6486.801.1.2.1.72.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.1 |
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.10 |
||
|
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.2 |
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.3 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.4 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.5 |
||
|
Unsigned32
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.6 |
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.7 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.8 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.1.1.9 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.1 |
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.10 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.11 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.12 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.3 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.4 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.5 |
||
|
Unsigned32
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.6 |
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.7 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.8 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.2.1.9 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.10 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.11 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.12 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.13 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.14 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.3 |
||
|
Unsigned32
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.4 |
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.5 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.6 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.7 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.8 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.3.1.9 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.3 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.4 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.4.1.5 |
||
|
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.5 |
|
|
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.6 |
|
|
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.7 |
|
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.3 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.8.1.4 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.1.9.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.2 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.2.1 |
||
.1.3.6.1.4.1.6486.801.1.2.1.72.1.2.2 |
Dependencies (24) 9 direct · 15 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ALCATEL-ENT1-BASEalcatel-ent1
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- ALCATEL-ENT1-VIRTUAL-FLOW-CONTROL-MIBalcatel-ent1
- IEEE8021-TC-MIBrfc
- IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
- LLDP-V2-TC-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- LLDP-V2-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- Q-BRIDGE-MIBrfc
- LLDP-EXT-DOT1-V2-MIBrfc
- ALCATEL-ENT1-DCBX-MIBalcatel-ent1selected
Type Definitions (7)
| Enumeration |
na(0)restEtsAdminCfg(1)restPfcAdminCfg(2)disabledPfc(3)restEtsPfcAdminCfg(4)cfgLocalAdmin(5)cfgLocalRecom(6)cfgRemoteAdmin(7)cfgRemoteRecom(8)Indicates the action taken as a result of DcbxStatus
0: No action taken (dcbx might not be operationaly UP) 1: Restored ETS admin config 2: Restored PFC admin config 3: Disabled PFC 4: Restored ETS and PFC admin config 5: Configured local admin 6: Configured local recommended 7: Configured remote admin 8: Configured remote recommended |
|
| OctetString |
range: 32 Each group of four octets in this string specify
a 32-bit Traffic class ID. The IDs are stored in network byte order; i.e. octet N corresponds to the most significant 8 bits of the ID, and octet N+3 correspond to the least significant 8 bits. The list is large enough to hold 8 TC IDs, one per priority. The first first 4 octets represent the first priority. |
|
| Enumeration |
ok(0)pfcResourcesExhausted(1)pfcTlvMismatch(2)etsTlvMismatch(3)etsPfcTlvMismatch(4)Indicates the dcbx status (could be related to hardware)
0: OK 1: PFC Resources Exhausted 2: PFC TLV Mismatch 3: ETS TLV Mismatch 4: PFC and ETS TLV Mismatch |
|
| OctetString |
range: 1 Octet representing the traffic classes present
in a particular profile. Each bit represents the presence of the traffic class. The first bit indicates if TC 0 is present, the second bit indicates TC 1, and so forth. Bit value 1 indicates the TC is present. Bit value 0 indicates the TC is not present. Can be used to change the TC numbering. |
|
| Enumeration |
tfLossy(0)tfLossless(1)Indicates the traffic flow
0: Lossy 1: Lossless |
|
| Enumeration |
ieee(0)cee(1)auto(2)Indicates the dcbx version
0: IEEE 1: CEE 2: AUTO |
|
| Enumeration |
ieee(0)cee(1)auto(2)unknown(3)Indicates the remote dcbx version
0: IEEE 1: CEE 2: AUTO 3: Unknown |
Conformance Groups (7)
Compliance Statements (1)
OID
.1.3.6.1.4.1.6486.801.1.2.1.72.1.2.2.1Compliance statement for VFC-DCBX Subsystem.
Required groups
| mandatory | alaDcbxDCProfileGroup | |
| mandatory | alaDcbxDCPTrafficClassGroup | |
| mandatory | alaDcbxPortInstanceGroup | |
| mandatory | alaDcbxPortInstancePriorityGroup | |
| mandatory | alaDcbxPfcUsageGroup | |
| mandatory | alaDcbxPfcUsageNewGroup |