ALCATEL-ENT1-BFD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
37
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2 · 1 row entry · 13 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaBfdIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-BFD-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-BFD-MIB::alaBfdIntfTable'
The BFD Interface Table describes the configured parameters used for
BFD sessions on this outgoing IP interface, identified by the interface index.
alaBfdIntfEntry row .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1
The BFD interface Entry describes BFD session configuration for the IP
interface.
Indexes
Column Syntax OID
The ifIndex of the IP Interface for which the BFD session configuration is applied
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.1
This object specifies IP address type values - unknown(0), ipv4(1) or ipv6(2).
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.2
The address of the IP interface for which BFD session parameters are configured
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.3
The administrative status of the BFD interface.
AlaBfdStatusr/w
Type Values:
1enabled
2disabled
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.4
The Minimum Desired Tx interval at which packets should be transmitted for
BFD sessions on this interface. The default value for this object is derived
from the value of alaBfdGlobalTxInterval.
AlaBfdIntervalr/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.5
The Minimum Rx interval at which packets can be received for BFD sessions on
this interface. The default value for this object is derived from the value of
alaBfdGlobalRxInterval.
AlaBfdIntervalr/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.6
The Minimum Echo Rx interval at which ECHO packets can be received for BFD
sessions on this interface. The default value for this object is derived from the
value of alaBfdGlobalEchoRxInterval.
AlaBfdIntervalr/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.7
The Detection time multiplier for BFD sessions on this interface. The default
value for this object is derived from the value of alaBfdGlobalDetectMult.
Integer32r/w
Constraints:
range: 3-10
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.8
This object indicates the local system's desire to use authentication on BFD
sessions. If set to true(1), the local system wishes the session to be authenticated
and set to false(0) if not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.9
The Authentication Type used for BFD sessions on this interface. This field is valid
only when the Authentication Present bit is set.
Enumerationr/w
Enumerated Values:
1none
2simplePassword
3keyedMD5
4meticulousKeyedMD5
5keyedSHA1
6meticulousKeyedSHA1
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.10
The user defined name used to identify the IP interface
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.11
The operational status of this BFD IP interface, which is dependent on IP interface
status.
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.12
Snmp row status variable for this interface entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.2.1.13
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3 · 1 row entry · 15 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaBfdSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-BFD-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-BFD-MIB::alaBfdSessTable'
The BFD Session Table describes the BFD sessions for this router instance.
alaBfdSessEntry row .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1
The BFD Session Entry describes the BFD session.
Column Syntax OID
The systemwide-unique local discriminator that identifies this BFD session.
Unsigned32
Constraints:
range: 1-1024
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.1
This object specifies the IP address type of the neighbor or remote router.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.2
The IP address of the neighbor or remote router for this BFD session.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.3
This bit map object specifies the session type(s) that have been requested by
BFD applications to this session's remote address. One or more applications can
request different types of sessions to the same remote addres…
Bits
Enumerated Values:
0asynchronous
1echo
2demand
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.4
The discriminator used by the remote router for this BFD session.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.5
The unique source UDP Port for this BFD session in this router instance.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.6
The protocol state of the BFD session.
Enumeration
Enumerated Values:
1adminDown
2down
3init
4up
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.7
A diagnostic code specifying the local system's reason for the last transition
of the session from up(4)to some other state.
AlaBfdDiag
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.8
This object specifies the current operating mode of the BFD session.
Enumeration
Enumerated Values:
1asyncModeWEchoFunction
2asynchModeWOEchoFunction
3demandModeWEchoFunction
4demandModeWOEchoFunction
5echoOnly
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.10
This object indicates the local system's ability to continue to
function through a disruption of the control plane. Specifically, it is
set to true(1) if the local system's BFD implementation independent of the
control…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.11
This object contains an ifIndex of the IP interface on which this
BFD session is running. This value can be zero if there are no interface associated
with this BFD session.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.12
This object specifies the minimum interval, in milliseconds, that the local system
will transmit BFD Control packets.
AlaBfdInterval
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.13
This object specifies the minimum interval, in milliseconds, that the local system
will receive BFD Control packets.
AlaBfdInterval
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.14
This object specifies the minimum echo rx interval, in milliseconds, that the local system
will receive BFD Echo packets.
AlaBfdInterval
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.15
Bit map object to reflect BFD applications that have requested for detection to
this session's remote address. Bits 0 - 6 are currently in use, and if set,
indicate that the respective application has requested BFD sess…
Bits
Enumerated Values:
0vrrp
1staticRtg
2ospf
3bgp
4isis
5pim
6dvmrp
7ospf3
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.3.1.16
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4 · 1 row entry · 9 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaBfdSessPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-BFD-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-BFD-MIB::alaBfdSessPerfTable'
This table specifies BFD Session performance and statistics.
alaBfdSessPerfEntry row .1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1
An entry in this table is created for every BFD Session in this router
instance.
Indexes
No indexes recorded
Column Syntax OID
The total number of BFD packets received for this BFD session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.1
The total number of BFD packets sent for this BFD session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.2
The total number of BFD Echo packets sent for this BFD session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.3
The total number of BFD Echo packets received for this BFD session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.4
The system time elapsed since the most recent occasion at which the session became up.
If no such event occured, this object contains a zero value.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.5
The system time elapsed since the most recent occasion at which communication
was lost with the remote end (i.e. session was down). If no such event occured,
this object contains a zero value.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.6
The BFD diagnostic code for the last time communication was lost with the remote
end. If no such event occured, this object contains a zero value.
AlaBfdDiag
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.7
The number of times this session has gone into the Up state since the
router last rebooted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.8
The value of system time on the most recent occasion at which any one or more of the
session counters suffered a discontinuity.The relevant counters are the specific
instances associated with this BFD session of any Cou…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.45.1.1.4.1.9