ALCATEL-ENT1-APP-FINGERPRINT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
27
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.1 · 1 row entry · 5 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAppFPPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-APP-FINGERPRINT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-APP-FINGERPRINT-MIB::alaAppFPPortTable'
This table contains one row for each port.
alaAppFPPortEntry row .1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.1.1
Information about the App Fingerprint Port Mode.
Port modes are as defined below
Column Syntax OID
The ifIndex component of this instance.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.1.1.1
App Group name or QoS Policy List name associated with the alaAppFPPort.
If the alaAppFPPortOperationMode is unp(3), this should be set to 'UNP'.
The 0 length string is allowed only in SNMP SET destroy operation.
It is …
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.1.1.2
It indicates the operation mode of the app-fingerprint feature running on the port.
If the operation mode is set to unp(3), the alaAppFPGroupNameOrPolicyList value
should be 'UNP'.
Enumerationr/w
Enumerated Values:
1monitoring
2qos
3unp
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.1.1.3
It indicates that the Group Name or Policy List Name associated
with the port is valid or invalid.
If it is invalid, then the specified Group Name or Policy List Name
is inactive at the moment.
Enumeration
Enumerated Values:
1active
2inactive
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.1.1.4
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.1.1.5
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.2 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAppFPAppNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-APP-FINGERPRINT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-APP-FINGERPRINT-MIB::alaAppFPAppNameTable'
This table contains one row for each App signature.
alaAppFPAppNameEntry row .1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.2.1
Information about the App Name and its Signature.
Indexes
Column Syntax OID
OctetString
Constraints:
range: 1-24
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.2.1.1
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.2.1.2
OctetString
Constraints:
range: 0-256
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.2.1.3
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3 · 1 row entry · 12 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAppFPDatabaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-APP-FINGERPRINT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-APP-FINGERPRINT-MIB::alaAppFPDatabaseTable'
This table contains one row for each multi-tuple classifier.
alaAppFPDatabaseEntry row .1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1
Information about the App Info database as gathered from monitoring each configured port.
Column Syntax OID
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.1
OctetString
Constraints:
range: 1-24
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.2
OctetString
Constraints:
range: 1-24
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.3
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.4
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.5
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.6
OctetString
Constraints:
range: 16-16
range: 20-20
range: 8-8
range: 4-4
range: 0-0
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.7
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.8
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.9
OctetString
Constraints:
range: 20-20
range: 16-16
range: 8-8
range: 4-4
range: 0-0
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.10
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.11
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.3.1.12
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.4 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAppFPAppGrpNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-APP-FINGERPRINT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-APP-FINGERPRINT-MIB::alaAppFPAppGrpNameTable'
This table contains one row for group name and description.
appFPAppGrpNameEntry row .1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.4.1
Information about the App Name.
Column Syntax OID
OctetString
Constraints:
range: 1-24
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.4.1.1
OctetString
Constraints:
range: 1-24
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.4.1.2
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.5 · 1 row entry · 5 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAppFPStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-APP-FINGERPRINT-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-APP-FINGERPRINT-MIB::alaAppFPStatsTable'
This table contains total captured packets for all multi-tuple classifiers.
alaAppFPStatsEntry row .1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.5.1
Information about the App Info database for all packets captured.
Column Syntax OID
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.5.1.1
OctetString
Constraints:
range: 1-24
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.5.1.2
OctetString
Constraints:
range: 1-24
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.5.1.3
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.5.1.4
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.73.1.1.2.5.1.5