ALCATEL-ENT1-ALARM-MGR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
29

alaAlarmInputConfigTable

table
.1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2 · 1 row entry · 13 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAlarmInputConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ALARM-MGR-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ALARM-MGR-MIB::alaAlarmInputConfigTable' 
This table defines the Alarm Input.Configures the alarm for different actions. 
For alarm input action, chassis can be configured either for sending a snmp trap, 
logging a swlog message locally, or setting alarm on the alarm output.
alaAlarmInputConfigEntry row .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1
An entry of the alarm input configuration table.
Indexes
Column Syntax OID
alaAlarmInputConfigName
Name of the alarm input.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.1
alaAlarmInputConfigChassis
Chassis Identifier where alarm input is connected.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.2
alaAlarmInputConfigType
Actions are sending trap message.
Enumerationr/w
Enumerated Values:
1alarmInput
2systemEvent
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.3
alaAlarmInputConfigTrapActionEnable
Actions are sending trap message.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.4
alaAlarmInputConfigSwlogActionEnable
Actions are sending swlog message.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.5
alaAlarmInputConfigAlarmOutputActionEnable
Actions are setting alarm on the alarm output.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.6
alaAlarmInputConfigEvent
Alarm configure event.
Enumerationr/w
Enumerated Values:
1portHealth
2systemHealth
3powerSupply
4temperature
5authenticationFailure
6vcStatusChange
7portViolation
8linkDown
9trap
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.7
alaAlarmInputConfigEventTrapId
Trap Identifier.
Unsigned32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.8
alaAlarmInputConfigNetworkPortStart
Specifies the interface index for Alarm Event network port start.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.9
alaAlarmInputConfigNetworkPortEnd
Specifies the interface index for Alarm Event network port end.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.10
alaAlarmInputConfigAdminStatus
Administrative control to enable/disable the alarm.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.11
alaAlarmInputConfigClearStats
Setting a value of clear into this variable will clear Alarm status.
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.12
alaAlarmInputConfigRowStatus
Row Status for creating/deleting.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.2.1.13

alaAlarmOutputConfigTable

table
.1.3.6.1.4.1.6486.801.1.2.1.93.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAlarmOutputConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ALARM-MGR-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ALARM-MGR-MIB::alaAlarmOutputConfigTable' 
Configures the alarm output relay of each chassis.
alaAlarmOutputConfigEntry row .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.3.1
An entry of the alarm output configuration table.
Indexes
Column Syntax OID
alaAlarmOutputConfigName
Name of the alarm output.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.3.1.1
alaAlarmOutputConfigChassis
Chassis Identifier where alarm output is connected.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.3.1.2
alaAlarmOutputConfigAdminStatus
Administrative control to enable/disable the alarm.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.3.1.3
alaAlarmOutputConfigRowStatus
Row Status for creating/deleting.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.3.1.4

alaAlarmMappingConfigTable

table
.1.3.6.1.4.1.6486.801.1.2.1.93.1.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAlarmMappingConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ALARM-MGR-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ALARM-MGR-MIB::alaAlarmMappingConfigTable' 
This table to defines mapping the alarm input or system event of any chassis to any other chassis.
alaAlarmMappingConfigEntry row .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.4.1
An entry of the alarm mapping configuration table.
Indexes
Column Syntax OID
alaAlarmMappingConfigInputName
Name of the alarm input or name of the system event.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.4.1.1
alaAlarmMappingOutputConfigName
Name of the alarm input or name of the system event.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.4.1.2
alaAlarmMappingConfigRowStatus
Row Status for creating/deleting.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.4.1.3

alaAlarmStatusTable

table
.1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6 · 1 row entry · 9 columns
Open in standard view
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaAlarmStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-ALARM-MGR-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-ALARM-MGR-MIB::alaAlarmStatusTable' 
The configuration parameters of a user alarm.
alaAlarmStatusEntry row .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1
An entry of the alarm status configuration table.
Indexes
Column Syntax OID
alaAlarmStatusInputName
Name of the alarm status input.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.1
alaAlarmStatusOutputName
Name of the alarm status output.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.2
alaAlarmStatusInputChassis
Chassis Identifier where alarm input is connected.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.3
alaAlarmStatusOutputChassis
Chassis Identifier where alarm output is connected.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.4
alaAlarmStatusTimeStamp
The system time when this alarm status was created.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.5
alaAlarmStatusTrapId
Trap Identifier.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.6
alaAlarmStatusEvent
Alarm status configure event.
Enumeration
Enumerated Values:
1portHealth
2systemHealth
3powerSupply
4temperature
5authenticationFailure
6vcStatusChange
7portViolation
8linkDown
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.7
alaAlarmStatusNetworkPortStart
Specifies the interface index for Alarm Status network port start.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.8
alaAlarmStatusNetworkPortEnd
Specifies the interface index for Alarm Status network port end.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.2.1.93.1.1.6.1.9