AGENT-GENERAL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
131

agentMibCapabilityTable

table
.1.3.6.1.4.1.171.12.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentMibCapabilityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentMibCapabilityTable' 
A list of MIB capability entries supported by this agent.
agentMibCapabilityEntry row .1.3.6.1.4.1.171.12.1.1.2.1
A MIB capability entry containing objects that describe a particular MIB
supported by this agent.
Indexes
No indexes recorded
Column Syntax OID
agentMibCapabilityIndex
A list of Agent MIB Capability Description entries.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.2.1.1
agentMibCapabilityDescr
The name of the MIB supported by the agent.
OctetString .1.3.6.1.4.1.171.12.1.1.2.1.2
agentMibCapabilityVersion
The version of the MIB specified in this entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.2.1.3
agentMibCapabilityType
The type of MIB specified in this entry.
Enumeration .1.3.6.1.4.1.171.12.1.1.2.1.4

agentPORTutilizationTable

table
.1.3.6.1.4.1.171.12.1.1.8 · 1 row entry · 4 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentPORTutilizationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentPORTutilizationTable' 
This table specifies the current utilization of a specified port.
agentPORTutilizationEntry row .1.3.6.1.4.1.171.12.1.1.8.1
A list of information regarding the port utilization function.
Indexes
No indexes recorded
Column Syntax OID
agentPORTutilizationProtIndex
This object indicates the module's port number.
Integer32 .1.3.6.1.4.1.171.12.1.1.8.1.1
agentPORTutilizationTX
The current rate of transmitted frames on the specified port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.8.1.2
agentPORTutilizationRX
The current rate of received frames on the specified port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.8.1.3
agentPORTutilizationUtil
The current percentages regarding port statistics.
%Integer32 .1.3.6.1.4.1.171.12.1.1.8.1.4

agentDRAMutilizationTable

table
.1.3.6.1.4.1.171.12.1.1.9 · 1 row entry · 4 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentDRAMutilizationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentDRAMutilizationTable' 
Information about DRAM memory.
agentDRAMutilizationEntry row .1.3.6.1.4.1.171.12.1.1.9.1
A list of information about DRAM memory.
Indexes
No indexes recorded
Column Syntax OID
agentDRAMutilizationUnitID
Specifies the unit ID.
If the ID equals zero, it means the current device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.9.1.1
agentDRAMutilizationTotalDRAM
The size of total DRAM memory.
KBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.9.1.2
agentDRAMutilizationUsedDRAM
The size of used DRAM memory.
KBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.9.1.3
agentDRAMutilization
The percentage of used DRAM memory of the total DRAM memory available.
The value will be between 0% (idle) and 100% (very busy).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.9.1.4

agentFLASHutilizationTable

table
.1.3.6.1.4.1.171.12.1.1.10 · 1 row entry · 4 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentFLASHutilizationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentFLASHutilizationTable' 
Information about the flash memory.
agentFLASHutilizationEntry row .1.3.6.1.4.1.171.12.1.1.10.1
Information about the flash memory.
Indexes
No indexes recorded
Column Syntax OID
agentFLASHutilizationUnitID
Specifies the unit ID.
If the ID equals zero, it means the current device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.10.1.1
agentFLASHutilizationTotalFLASH
The total size of flash memory.
KBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.10.1.2
agentFLASHutilizationUsedFLASH
The size of the used flash memory.
KBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.10.1.3
agentFLASHutilization
The percentage of used flash memory in total flash memory.
The value will be between 0% (idle) and 100% (very busy).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.1.10.1.4

agentBscSwFileTable

table
.1.3.6.1.4.1.171.12.1.2.1 · 1 row entry · 16 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentBscSwFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentBscSwFileTable' 
A list of MIB Basic Config entry support files updated by this agent.
agentBscSwFileEntry row .1.3.6.1.4.1.171.12.1.2.1.1
A basic configuration entry containing the objects that describe a particular MIB
supported by this agent.
Indexes
No indexes recorded
Column Syntax OID
agentBscSwFileIndex
The table index for the file entry
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.1.1.1
agentBscSwFileDscr
The description of the software file purpose in this entry.
Note: For systems that do not support a change to this object, setting a value for
this object will cause the system to return bad-value error messages.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.1.1.2
agentBscSwFileAddr
The IP address where the file that needs to be downloaded is located, or the IP address
where the file will be uploaded to.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.1.2.1.1.3
agentBscSwFileTransferType
The channel through which the file will be downloaded or uploaded.
Note: For systems that do not support all channels, setting a value to the unsupported
channel will cause the system to return bad-value error messages.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.1.1.4
agentBscSwFile
The name of the file to be downloaded from, or uploaded to, the TFTP server.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.1.1.5
agentBscSwFileLocateId
This object describes the type of file.
runtime-code (1),
log-file (2),
cfg-file (3)
Note: For systems that do not support changes to this object, setting a value for
this object will cause the system to return bad-valu…
Integer32r/w .1.3.6.1.4.1.171.12.1.2.1.1.6
agentBscSwFileLoadType
This object provides the user with a choice of uploading or downloading the selected file.
Note: For systems that do not support a change to this object, setting a value for this object
will cause the system to return …
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.1.1.7
agentBscSwFileCtrl
This object gives the user the option of downloading runtime software. This setting will take effect
when the system restarts. See Note (1) below

Note:
For systems that do not supp…
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.1.1.8
agentBscSwFileBIncrement
This object indicates whether the previous configuration will remain
valid or not after downloading the configuration file.
True: Keep valid
False: Erase.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.1.1.9
agentBscSwFileCtrlID
The section ID of the firmware image or configuration file.
A value of 0 indicates the boot-up firmware image or configuration file.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.1.1.10
agentBscSwFileCtrlUnitID
Specifies which unit of the switch stack the firmware image will be downloaded from.
One or more units can be set in this list. Each bit from the left to the right represents the
switch from unit ID 1 to unit ID 12.
A …
UnitListr/w
Type Constraints:
range: 0..3
 .1.3.6.1.4.1.171.12.1.2.1.1.11
agentBscSwFileIPv6Addr
The IPv6 address where the file will be downloaded from or uploaded to.
Ipv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.1.2.1.1.12
agentBscSwFileBootUpImage
The result of the download will depend on whether the boot_up option is specified.
Case 1: In the case where the master unit provides the file system and the slave unit does
not provide the file system, when boot_up …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.1.1.13
agentBscSwFileForceAgree
When the force_agree option is specified, the reboot command will be executed
immediately, without any further confirmation from the user.

True: force_agree option is specified.
False: force_agree option …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.1.1.14
agentBscSwFileInterfaceName
This node is used to specify the interface name when the agentBscSwFileIPv6Addr
is the link local address.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.1.1.15
agentBscSwFileServerDomainName
This object indicates the domain name of the TFTP server.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.1.1.16

swMultiImageInfoTable

table
.1.3.6.1.4.1.171.12.1.2.7 · 1 row entry · 7 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swMultiImageInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::swMultiImageInfoTable'
swMultiImageInfoEntry row .1.3.6.1.4.1.171.12.1.2.7.1
A list of information about multiple image management.
Indexes
No indexes recorded
Column Syntax OID
swMultiImageInfoID
The stacking section ID of the firmware image.
The stacking section ID = 256 * Unit ID + Image File ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.7.1.1
swMultiImageVersion
The recorded downloaded firmware version.
OctetString .1.3.6.1.4.1.171.12.1.2.7.1.2
swMultiImageSize
The recorded downloaded firmware size.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.7.1.3
swMultiImageUpdateTime
The recorded firmware update time.
OctetString .1.3.6.1.4.1.171.12.1.2.7.1.4
swMultiImageFrom
The recorded IP address of the TFTP server
OctetString .1.3.6.1.4.1.171.12.1.2.7.1.5
swMultiImageSendUser
The record of the user who downloaded the firmware.
OctetString .1.3.6.1.4.1.171.12.1.2.7.1.6
swMultiImageFileName
When the system is set to boot from SD card, this object will display the recorded path name of the boot firmware file.
OctetString .1.3.6.1.4.1.171.12.1.2.7.1.7

swMultiCfgInfoTable

table
.1.3.6.1.4.1.171.12.1.2.8.1 · 1 row entry · 7 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swMultiCfgInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::swMultiCfgInfoTable'
swMultiCfgInfoEntry row .1.3.6.1.4.1.171.12.1.2.8.1.1
A list of information about multiple configuration files.
Indexes
No indexes recorded
Column Syntax OID
swMultiCfgInfoID
The section ID of the configuration files.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.8.1.1.1
swMultiCfgVersion
The recorded downloaded configuration version.
OctetString .1.3.6.1.4.1.171.12.1.2.8.1.1.2
swMultiCfgSize
The recorded downloaded configuration size (in bytes).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.8.1.1.3
swMultiCFgUpdateTime
The recorded configuration update time
displayed in string format, i.e. yyyy/mon/dd hh:mm:ss.
OctetString .1.3.6.1.4.1.171.12.1.2.8.1.1.4
swMultiCfgFrom
The recorded IP address of the TFTP server.
OctetString .1.3.6.1.4.1.171.12.1.2.8.1.1.5
swMultiCfgSendUser
The record of the user who downloaded the configuration file
OctetString .1.3.6.1.4.1.171.12.1.2.8.1.1.6
swMultiCfgFileName
When the system is set to boot from SD card, this object displays the recorded path name of the boot configuration file.
OctetString .1.3.6.1.4.1.171.12.1.2.8.1.1.7

swMultiCfgCtrlTable

table
.1.3.6.1.4.1.171.12.1.2.8.4 · 1 row entry · 2 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swMultiCfgCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::swMultiCfgCtrlTable'
swMultiCfgCtrlEntry row .1.3.6.1.4.1.171.12.1.2.8.4.1
A list of information about multiple configuration management.
Indexes
No indexes recorded
Column Syntax OID
swMultiCfgCtrlID
The section ID of the configuration file.
Enumeration .1.3.6.1.4.1.171.12.1.2.8.4.1.1
swMultiCfgAction
save: Save configuration to active configuration ID when the parameter is omitted.
active: Set any valid configuration as the active configuration.
delete: Removes the configuration from the flash memory. This configura…
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.8.4.1.2

agentTrustedHostTable

table
.1.3.6.1.4.1.171.12.1.2.10.1 · 1 row entry · 13 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentTrustedHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentTrustedHostTable' 
This table contains the trusted host information.
agentTrustedHostEntry row .1.3.6.1.4.1.171.12.1.2.10.1.1
A list of information about the trusted hosts.
Indexes
No indexes recorded
Column Syntax OID
agentTrustedHostIndex
The index of the trusted host entry.
Integer32 .1.3.6.1.4.1.171.12.1.2.10.1.1.1
agentTrustedHostIPAddress
Specifies the IP address of the trusted host.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.1.2.10.1.1.2
agentTrustedHostRowStatus
Indicates the status of this entry. When creating a trusted host
entry, the IP address should also be set.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.171.12.1.2.10.1.1.3
agentTrustedHostIPSubnetMask
Specifies the IP subnet mask of the trusted host.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.1.2.10.1.1.4
agentTrustedHostForSNMP
Specifies the trusted host for SNMP.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.10.1.1.5
agentTrustedHostForTELNET
Specifies the trusted host for Telnet.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.10.1.1.6
agentTrustedHostForSSH
Specifies the trusted host for SSH.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.10.1.1.7
agentTrustedHostForHTTP
Specifies the trusted host for HTTP.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.10.1.1.8
agentTrustedHostForHTTPS
Specifies the trusted host for HTTPS.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.10.1.1.9
agentTrustedHostForPING
Specifies the trusted host for PING.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.10.1.1.10
agentTrustedHostAddrType
The type of trusted host address as specified by
the 'agentTrustedHostAddr' object.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.171.12.1.2.10.1.1.11
agentTrustedHostAddr
Specifies the IP address of the trusted host.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.12.1.2.10.1.1.12
agentTrustedHostIPv6PrefixLen
Specifies the IPv6 prefix length of the IPv6 trusted host.
Integer32r/w .1.3.6.1.4.1.171.12.1.2.10.1.1.13

agentFDBClearByPortTable

table
.1.3.6.1.4.1.171.12.1.2.11.2 · 1 row entry · 2 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentFDBClearByPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentFDBClearByPortTable' 
Used to clear FDB entries by port.
agentFDBClearByPortEntry row .1.3.6.1.4.1.171.12.1.2.11.2.1
This is an entry of the agentFDBClearByPortTable.
Indexes
No indexes recorded
Column Syntax OID
agentFDBClearPortIndex
This object indicates the port number.
Integer32 .1.3.6.1.4.1.171.12.1.2.11.2.1.1
agentFDBClearByPortAction
This object indicates whether to clear FDB or not.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.11.2.1.2

agentFDBClearByVlanTable

table
.1.3.6.1.4.1.171.12.1.2.11.3 · 1 row entry · 2 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentFDBClearByVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentFDBClearByVlanTable' 
Used to clear FDB entries by port.
agentFDBClearByVlanEntry row .1.3.6.1.4.1.171.12.1.2.11.3.1
This is an entry of agentFDBClearByPortTable.
Indexes
No indexes recorded
Column Syntax OID
agentFDBClearVid
This object indicates the VLAN-ID.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.12.1.2.11.3.1.1
agentFDBClearByVlanAction
This object indicates whether to clear the FDB or not.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.11.3.1.2

agentFDBSecurityTable

table
.1.3.6.1.4.1.171.12.1.2.11.4 · 1 row entry · 6 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentFDBSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentFDBSecurityTable' 
Used to display the FDB entries that have been created by the security module.
agentFDBSecurityEntry row .1.3.6.1.4.1.171.12.1.2.11.4.1
This is an entry of agentFDBSecurityTable.
Indexes
No indexes recorded
Column Syntax OID
agentFDBVid
This object indicates the VLAN-ID.
Q-BRIDGE-MIBVlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.12.1.2.11.4.1.1
agentFDBMacAddress
This object indicates the MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.171.12.1.2.11.4.1.2
agentFDBPort
This object indicates the port number.
Integer32 .1.3.6.1.4.1.171.12.1.2.11.4.1.3
agentFDBType
This object indicates the MAC address type.
Enumeration .1.3.6.1.4.1.171.12.1.2.11.4.1.4
agentFDBStatus
This object indicates the MAC address's forwarding status.
Enumeration .1.3.6.1.4.1.171.12.1.2.11.4.1.5
agentFDBSecurityModule
This object is used to indicate which security module created the current MAC address.
dot1x: 802.1X.
wac: Web-based Access Control.
jwac: Web-Based Access Control extension for Japan.
port-security: Port Security.
mac…
Enumeration .1.3.6.1.4.1.171.12.1.2.11.4.1.6

agentGratuitousARPTable

table
.1.3.6.1.4.1.171.12.1.2.12.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentGratuitousARPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentGratuitousARPTable' 
Gratuitous ARP Table Information.
agentGratuitousARPEntry row .1.3.6.1.4.1.171.12.1.2.12.2.4.1
A list of information from the Gratuitous ARP Table.
Indexes
No indexes recorded
Column Syntax OID
agentGratuitousARPInterfaceName
The name of the IP interface.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.12.1.2.12.2.4.1.1
agentGratuitousARPPeriodicalSendInterval
This is used to configure the interval for the periodic sending of
gratuitous ARP request packets.
0 means do not send gratuitous ARP request packets periodically.
secondsInteger32r/w .1.3.6.1.4.1.171.12.1.2.12.2.4.1.2
agentGratuitousARPTrapState
This indicates the state of the gratuitous ARP trap. The switch can
trap the IP conflict events to inform the administrator.
By default, the trap is disabled.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.12.2.4.1.3
agentGratuitousARPLogState
This indicates the state of the gratuitous Log trap. The switch can
log the IP conflict events to inform the administrator.
By default, the event log is enabled.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.12.2.4.1.4

swMultiImageCtrlTable

table
.1.3.6.1.4.1.171.12.1.2.13 · 1 row entry · 2 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swMultiImageCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::swMultiImageCtrlTable'
swMultiImageCtrlEntry row .1.3.6.1.4.1.171.12.1.2.13.1
A list of information about multiple image management.
Indexes
No indexes recorded
Column Syntax OID
swMultiImageCtrlID
The stacking section ID of the firmware image.
The stacking section ID = 256 * Unit ID + Image File ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.13.1.1
swMultiImageCtrlAction
This object indicates the running status of the image which is
specified by swMultiImageCtrlID and swMultiImageCtrlUnitID.

config-as-bootup-fw (1) - Configured as the bootup firmware by the indicated firm…
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.13.1.2

agentBscFileSystemTable

table
.1.3.6.1.4.1.171.12.1.2.18.1 · 1 row entry · 15 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentBscFileSystemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentBscFileSystemTable' 
A list of MIB File System Basic Configuration entries supported
by the file update of this agent.
agentBscFileSystemEntry row .1.3.6.1.4.1.171.12.1.2.18.1.1
A File System basic configuration entry that contains objects
describing a particular MIB supported by this agent.
Indexes
No indexes recorded
Column Syntax OID
agentBscFileSystemIndex
The table index for the file entry.
This object describes the file type.
runtime-code (1),
log-file (2),
cfg-file (3),
attack-log-file (7)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.18.1.1.1
agentBscFileSystemDscr
The description of the software file purpose in this entry.
OctetString .1.3.6.1.4.1.171.12.1.2.18.1.1.2
agentBscFileSystemServerAddr
The IP address where the file to be downloaded is located, or the IP address
where the file will be uploaded to.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.1.2.18.1.1.3
agentBscFileSystemServerIPv6Addr
The IPv6 address where the file is to be downloaded from or uploaded to.
Ipv6Addressr/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.1.2.18.1.1.4
agentBscFileSystemServerFileName
The name of the file to be downloaded from or uploaded to the TFTP server.
If agentBscFileSystemDeviceFileName is not set, the switch will default to using
the bootup file as the runtime image for the switch.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.18.1.1.5
agentBscFileSystemDeviceDriverID
Specifies the drive of the device that the firmware to be uploaded/downloaded is located.
If none (1) is specified, the switch will default to the current drive.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.18.1.1.6
agentBscFileSystemDeviceFileName
The name of the file to be downloaded to the device, or uploaded from the
device. When downloading or uploading, the agentBscFileSystemServerFileName object must also be set.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.18.1.1.7
agentBscFileSystemLoadType
This object allows the user to select a download or upload function for the file.

Note:
For systems that do not support changes to this object, setting a value for
this object will cause the system to ret…
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.18.1.1.8
agentBscFileSystemCtrlUnitID
Specifies which unit of the switch stack the firmware image or configuration file should be downloaded from.
One or more units can be set in this list. Each bit from left to right represents the
switch from unit ID 1 to…
UnitListr/w
Type Constraints:
range: 0..3
 .1.3.6.1.4.1.171.12.1.2.18.1.1.9
agentBscFileSystemBootUpImage
The result of the download will depend on whether the boot_up option has been specified.
Case 1: In the case of the master unit providing the file system and the slave unit
not providing the file system, when the boo…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.18.1.1.10
agentBscFileSystemForceAgree
When the force_agree option is specified, the reboot command will be executed immediately
without any further confirmation from the user.

True: force_agree option is specified.
False: force_agree option i…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.18.1.1.11
agentBscFileSystemCtrl
This object allows the user to download runtime software. The settings
will take effect when the system restarts. See Note (1) below

Note 1:
For systems which do not support value changes to this object,
…
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.18.1.1.12
agentBscFileSystemInterfaceName
This node is used to specify the interface name when agentBscFileSystemServerIPv6Addr
is the local link address.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.18.1.1.13
agentBscFileSystemServerDomainName
This object indicates the domain name of the TFTP server.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.18.1.1.14
agentBscFileSystemIncrement
If increment is specified, then the existing configuration will not be cleared before applying
of the new configuration. If it is not specified, then the existing configuration will be cleared
before applying of the new…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.18.1.1.15

agentFileSystemConfigTable

table
.1.3.6.1.4.1.171.12.1.2.18.5 · 1 row entry · 5 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentFileSystemConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentFileSystemConfigTable' 
This table indicates the information about the bootup files.
agentFileSystemConfigEntry row .1.3.6.1.4.1.171.12.1.2.18.5.1
A list of information about the bootup files for each unit of the switch stack.
Indexes
No indexes recorded
Column Syntax OID
agentFileSystemUnit
The unit ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.18.5.1.1
agentFileSystemDriverID
The drive on the device that the configuration file will be saved to.
If none (1) is specified, the switch will place the file to the current drive by default.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.18.5.1.2
agentFileSystemBootImage
When displayed, it shows the current bootup image file name.
When set, the set name will be set as the bootup image.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.18.5.1.3
agentFileSystemBootConfig
When displayed, it shows the current bootup configuration file name.
When set, the set name will be set as the bootup configuration.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.18.5.1.4
agentFileSystemActConfig
When displayed, it shows null.
When set, the set name will be active at once, but the set name
will not be set as the bootup configuration.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.18.5.1.5

agentFTPFileTable

table
.1.3.6.1.4.1.171.12.1.2.21 · 1 row entry · 16 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentFTPFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentFTPFileTable' 
A list of the MIB Basic Config entries support files updated by this agent.
agentFTPFileEntry row .1.3.6.1.4.1.171.12.1.2.21.1
A basic configuration entry containing the objects describing a particular MIB
supported by this agent.
Indexes
No indexes recorded
Column Syntax OID
agentFTPFileIndex
The table index for the file entry. This object describes the file type
runtime-code (1),
log-file (2),
cfg-file (3)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.21.1.1
agentFTPFileDscr
The description of the software file purpose in this entry.
Note: For systems which do not support changes to this object, setting a value for
this object will cause the system to return bad-value error messages.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.21.1.2
agentFTPFileLoadType
This object provides the user with a choice of uploading or downloading the selected file.
Note: For systems which do not support a change of this object, setting a value to this object
will cause the system to return b…
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.21.1.3
agentFTPFileAddr
The IP address that the file to be downloaded is located on, or the IP address
where the file will be uploaded to.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.1.2.21.1.4
agentFTPTCPPort
The TCP port number being used to establish the command connection.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.21.1.5
agentFTPFileName
The name of the file to be downloaded from, or uploaded to, the FTP server.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.21.1.6
agentFTPUserName
This is the user name to enter in upload/download.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.171.12.1.2.21.1.7
agentFTPPassword
This is the password to enter for an upload/download.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.171.12.1.2.21.1.8
agentFTPFileCtrlID
The section ID of the firmware image or configuration file.
A value of 0 indicates the boot-up firmware image or configuration file.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.21.1.9
agentFTPFileBIncrement
This object indicates whether the previous configuration will remain
valid or not after downloading the configuration file.
True: Keep valid
False: Erase.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.21.1.10
agentFTPFileCtrl
This object gives the user the option to download runtime software. The setting will take effect
when the system restarts. See Note (1) below
Note 1:
For systems which do not support changes to this object, se…
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.21.1.11
agentFTPFileBootUpImage
This object indicates whether to set the special file as a boot up file or not.
True: The boot-up option is specified.
False: The boot-up option is not specified.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.21.1.12
agentFTPFileForceAgree
When the force-agree option is specified, the reboot command will be executed
immediately without any further confirmation from the user.
True: Force-agree option is specified.
False: Force-agree option is not specified.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.21.1.13
agentFTPFileIPv6Addr
The IPv6 address where the file is to be downloaded from or uploaded to.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.171.12.1.2.21.1.14
agentFTPFileInterfaceName
This node is used to specify the interface name when agentFTPFileIPv6Addr
is the local link address.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.171.12.1.2.21.1.15
agentFTPFileUnitID
Specifies which unit of the switch stack the firmware image or configuration
file should be downloaded from. One or more units can be set in this list. Each
bit from left to right represents the switch from unit ID 1 …
UnitListr/w
Type Constraints:
range: 0..3
 .1.3.6.1.4.1.171.12.1.2.21.1.16

agentFTPFileSystemTable

table
.1.3.6.1.4.1.171.12.1.2.25 · 1 row entry · 13 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentFTPFileSystemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentFTPFileSystemTable' 
The FTP management table for the file system
agentFTPFileSystemEntry row .1.3.6.1.4.1.171.12.1.2.25.1
A File System basic configuration entry that contains objects
describing a particular MIB supported by this agent.
Indexes
No indexes recorded
Column Syntax OID
agentFTPFileSystemIndex
The table index for the file entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.25.1.1
agentFTPFileSystemDscr
The description of the software file purpose in this entry.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.12.1.2.25.1.2
agentFTPFileSystemLoadType
This object allows the user to select a download or upload function for the file.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.25.1.3
agentFTPFileSystemAddressType
The address type of agentFTPFileSystemAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.171.12.1.2.25.1.4
agentFTPFileSystemAddress
This object indicates the FTP server address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.12.1.2.25.1.5
agentFTPFileSystemTCPPort
The TCP port number being used to establish the control connection.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.1.2.25.1.6
agentFTPFileSystemServerFileName
The name of the file to be downloaded from or uploaded to the FTP server.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.25.1.7
agentFTPFileSystemDeviceFileName
The name of the file to be downloaded to the device, or uploaded from the
device.
If agentFTPFileSystemDeviceFileName is not set, the switch will default to
the bootup file.
OctetStringr/w .1.3.6.1.4.1.171.12.1.2.25.1.8
agentFTPFileSystemUserName
This object indicates the user name to access the FTP server.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.171.12.1.2.25.1.9
agentFTPFileSystemPassword
This object indicates the password to access the FTP server.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.171.12.1.2.25.1.10
agentFTPFileSystemCtrlUnitID
Specifies which unit of the switch stack the firmware image or configuration
file should be downloaded from. One or more units can be set in this list. Each
bit from left to right represents the switch from unit ID 1 …
UnitListr/w
Type Constraints:
range: 0..3
 .1.3.6.1.4.1.171.12.1.2.25.1.11
agentFTPFileSystemBootUpImage
This object indicates whether to set the special file as the boot up file or not.
True: The boot-up option is specified.
False: The boot-up option is not specified.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.171.12.1.2.25.1.12
agentFTPFileSystemCtrl
This object allows the user to execute an FTP download/upload.
Enumerationr/w .1.3.6.1.4.1.171.12.1.2.25.1.13

agentTrapManagerTable

table
.1.3.6.1.4.1.171.12.1.4.2 · 1 row entry · 5 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk agentTrapManagerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AGENT-GENERAL-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AGENT-GENERAL-MIB::agentTrapManagerTable' 
A list of trap managers that the SNMP traps will be sent to.
agentTrapManagerEntry row .1.3.6.1.4.1.171.12.1.4.2.1
Each entry contains the particular trap manager's settings.
Indexes
No indexes recorded
Column Syntax OID
agentTrapManagerIndex
A value that uniquely identifies trapDestEntry.
Integer32 .1.3.6.1.4.1.171.12.1.4.2.1.1
agentTrapManagerIpAddr
The destination IP address for SNMP traps.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.1.4.2.1.2
agentTrapManagerComm
The community string used to encode SNMP trap packets being sent to the trap
manager.
OctetStringr/w .1.3.6.1.4.1.171.12.1.4.2.1.3
agentTrapManagerMsgVer
This object indicates the version of trap packets that will be sent to
this trap manager. The default setting is SNMP Agent Version Dependent.

Note:
Because some of these functions…
Enumerationr/w .1.3.6.1.4.1.171.12.1.4.2.1.4
agentTrapManagerStatus
This object indicates whether or not the trap should be sent to
the trap manager.
Enumerationr/w .1.3.6.1.4.1.171.12.1.4.2.1.5