ADVA-FSP3000ALM-MIB Table View

Table of optical ports.

portEntry row .1.3.6.1.4.1.2544.1.14.2.2.1

Indexes

portId

Column	Syntax	OID
portId	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2544.1.14.2.2.1.1
portAdminState Administrative State of the port. Setting to mgt disables the service. It is, however, manadatory to set state to mgt to perform other measurement affecting actions (e.g. changing thresholds values).	Enumerationr/w Enumerated Values: 2 is 4 mgt 6 dsbld	.1.3.6.1.4.1.2544.1.14.2.2.1.2
portOperState Operational State of the port. The value of the port is set to anr if the at least one of the following alarms are set on this port: alarmMonNotRunning, alarmFpMissing.	Enumeration Enumerated Values: 0 undefined 1 nr 2 anr 3 out 4 un	.1.3.6.1.4.1.2544.1.14.2.2.1.3
portName Name of the link.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2544.1.14.2.2.1.4
portAidString	ADVA-MIBIdentityTranslation Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.2.2.1.5
portRemark Port remark.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2544.1.14.2.2.1.6
portFingerprintMode Type of the current Fingerprint.	Enumeration Enumerated Values: 0 none 1 pointToPointWithRefl 2 pointToPointWithoutRefl 3 pon 4 pes	.1.3.6.1.4.1.2544.1.14.2.2.1.7

Table of optical ports.

monitorPointEntry row .1.3.6.1.4.1.2544.1.14.2.3.2.1

Indexes

portId mpId

Column	Syntax	OID
mpId	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.2544.1.14.2.3.2.1.1
monitorPointPos Position of the Monitor Point in decimeter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.14.2.3.2.1.2
monitorPointState This variable is set to '1' when this Monitor Point is active. If this Monitor Point is inactive this variable is set to '0'.	Enumerationr/w Enumerated Values: 0 inactive 1 active	.1.3.6.1.4.1.2544.1.14.2.3.2.1.3
monitorPointName Name of the Monitor Point.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2544.1.14.2.3.2.1.4
monitorPointAidString	ADVA-MIBIdentityTranslation Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.2.3.2.1.5
monitorPointRemark Remark of the Monitor Point.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2544.1.14.2.3.2.1.6
monitorPointExternalId The externalId of the Monitor Point.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2544.1.14.2.3.2.1.7

Table of events issued by the NE's SNMP agent. The eventLog
entries are read-only.

eventLogEntry row .1.3.6.1.4.1.2544.1.14.4.2.1

Entries in the eventLog Table. Enterprise traps are
always logged; logging of Generic traps is product specific.

Indexes

eventLogIndex

Column	Syntax	OID
eventLogIndex The associated neEventsLogged counter for the logged event (trap).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.14.4.2.1.1
eventLogTimeStamp The NE Date and Time when the event (trap) occurred. This object is used in the trap varbind.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2544.1.14.4.2.1.2
eventLogNotificationOID The NOTIFICATION-TYPE object identifier of the event that occurred. The last part of the OID corresponds to the specific trap type value in the trap PDU.	ObjectIdentifier	.1.3.6.1.4.1.2544.1.14.4.2.1.3
eventLogIdentityTranslation Translation of entPhysicalIndex/ifIndex or other identifier to a string used in the trap varbind following the timestamp varbind.	ADVA-MIBIdentityTranslation Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.4.2.1.4

Table of variables corresponding to events logged in the
eventLog.

eventLogVarEntry row .1.3.6.1.4.1.2544.1.14.4.3.1

Entries in the eventLogVar Table. An entry appears in
this table for each variable in the varbind list of an entry
in the eventLogTable. For an event having no variables,
no entries are found in this table.

Indexes

eventLogIndex eventLogVarIndex

Column	Syntax	OID
eventLogVarIndex A monotonically increasing integer, starting at 1 for a given eventLogIndex, for indexing a variable contained in the varbind list of a logged event.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.14.4.3.1.1
eventLogVarId The object identifier of the variable in the varbind list.	ObjectIdentifier	.1.3.6.1.4.1.2544.1.14.4.3.1.2
eventLogVarType The type of variable. One and only one of the value objects that follow must be instantiated, based on this type. The used types depend on the enterprise traps defined for the specific product.	Enumeration Enumerated Values: 1 integer32 2 ipAddress 3 octetString 4 objectId 5 counter64 7 unsigned32	.1.3.6.1.4.1.2544.1.14.4.3.1.3
eventLogVarInteger32Val The value when eventLogVarType is 'integer32'. Integer32 is also used to represent INTEGER types. Otherwise, 0 is returned.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.14.4.3.1.4
eventLogVarIpAddressVal The value when eventLogVarType is 'ipAddress'. Otherwise, an empty address is returned.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.14.4.3.1.5
eventLogVarOctetStringVal The value when eventLogVarType is 'octetString'. OctetString is used for all string types, including DisplayString, SnmpAdminString and DateAndTime. Otherwise, an empty string is returned.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2544.1.14.4.3.1.6
eventLogVarOidVal The value when eventLogVarType is 'objectId'. Otherwise, an objectId { 0.0 } is returned.	ObjectIdentifier	.1.3.6.1.4.1.2544.1.14.4.3.1.7
eventLogVarCounter64Val The value when eventLogVarType is 'counter64'.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2544.1.14.4.3.1.8
eventLogVarUnsigned32Val The value when eventLogVarType is 'unsigned32'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.14.4.3.1.10

Table of Trapsinks. A trapsinkTable entry can be created,
deleted or modified via the SNMP interface for a specific
address and port.

trapsinkEntry row .1.3.6.1.4.1.2544.1.14.4.4.1

Entries in the Trapsink Table. Entries are created and
deleted using the trapsinkRowStatus object. The maximum of
rows in this table is product specific.

Indexes

trapsinkAddress trapsinkPort

Column	Syntax	OID
trapsinkAddress IP Address of the Management System which should receive SNMP Traps.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.14.4.4.1.1
trapsinkPort The port number where the specified trap sink will receive SNMP traps.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2544.1.14.4.4.1.2
trapsinkCommunity Community String which is sent with an SNMP Trap to the Management Station. The default is 'public'.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2544.1.14.4.4.1.3
trapsinkRowStatus The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.14.4.4.1.4
trapsinkVersion The default is v2(2).	Enumerationr/w Enumerated Values: 1 v1 2 v2 3 v3	.1.3.6.1.4.1.2544.1.14.4.4.1.5
trapsinkUserName A human readable string representing the name of the user.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.14.4.4.1.6

Table of IPv6 Trapsinks. A ipv6TrapsinkTable entry can be created,
deleted or modified via the SNMP interface for a specific
address and port.

ipv6TrapsinkEntry row .1.3.6.1.4.1.2544.1.14.4.5.1

Entries in the IPv6 Trapsink Table. Entries are created and
deleted using the ipv6TrapsinkRowStatus object. The maximum of
rows in this table is product specific.

Indexes

ipv6TrapsinkId

Column	Syntax	OID
ipv6TrapsinkId	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2544.1.14.4.5.1.1
ipv6TrapsinkAddress IPv6 Address of the Management System which should receive SNMP Traps.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.14.4.5.1.2
ipv6TrapsinkPort The port number where the specified trap sink will receive SNMP traps.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2544.1.14.4.5.1.3
ipv6TrapsinkCommunity Community String which is sent with an SNMP Trap to the Management Station. The default is 'public'.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2544.1.14.4.5.1.4
ipv6TrapsinkRowStatus The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.14.4.5.1.5
ipv6TrapsinkVersion The default is v2(2).	Enumerationr/w Enumerated Values: 1 v1 2 v2 3 v3	.1.3.6.1.4.1.2544.1.14.4.5.1.6
ipv6TrapsinkUserName A human readable string representing the name of the user.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.14.4.5.1.7

Table of email recipients.

emailRecipientEntry row .1.3.6.1.4.1.2544.1.14.5.7.8.1

Indexes

emailRecipientId

Column	Syntax	OID
emailRecipientId	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2544.1.14.5.7.8.1.1
emailRecipientAddress An email address.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.14.5.7.8.1.2
emailRecipientType The default value is to(1).	Enumerationr/w Enumerated Values: 1 to 2 cc 3 bcc	.1.3.6.1.4.1.2544.1.14.5.7.8.1.3
emailRecipientRowStatus The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.14.5.7.8.1.4
emailRecipientFormat The email format. You can choose either XML or the human readable email text format. The default value is xml(1)	Enumerationr/w Enumerated Values: 1 xml 2 text	.1.3.6.1.4.1.2544.1.14.5.7.8.1.5
emailRecipientMinSeverity The minimum severity of alarms that are sent to the recipient. The default value is low(1)	Enumerationr/w Enumerated Values: 1 low 2 med 3 high	.1.3.6.1.4.1.2544.1.14.5.7.8.1.6
emailRecipientAttachment Attach trace in sor format. The default value is no(1)	Enumerationr/w Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.2544.1.14.5.7.8.1.7

Table defining the mapping of portIds to externalIds.

externalIdEntry row .1.3.6.1.4.1.2544.1.14.5.7.9.1

Indexes

portId

Column	Syntax	OID
externalId The externalId for the corresponding port.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2544.1.14.5.7.9.1.1

userManagementTable

userManagementEntry row .1.3.6.1.4.1.2544.1.14.5.10.1.1

Entry of userManagementTable

Indexes

userManagementUsername

Column	Syntax	OID
userManagementRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.14.5.10.1.1.1
userManagementUsername The name string for user authentication purposes	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.5.10.1.1.2
userManagementEmailAddress An email address	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.5.10.1.1.3
userManagementPrivilegeLevel	Enumerationr/w Enumerated Values: 1 admin 2 operator 3 observer 4 netadmin	.1.3.6.1.4.1.2544.1.14.5.10.1.1.4
userManagementSecurityLevel	Enumerationr/w Enumerated Values: 0 undefined 1 noAuthNoPriv 2 authNoPriv 3 authPriv	.1.3.6.1.4.1.2544.1.14.5.10.1.1.5
userManagementAuthPrivKey A human readable string representing the current or new password for user account. Users with administrator privileges can use this object to set the password of other users.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.5.10.1.1.6
userManagementAuthPrivKeyOld A human readable string representing the old password for user account. This object should be used only for password change procedure.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.5.10.1.1.7
userManagementUdpSessionStatus UDP-based User Session Status	Enumeration Enumerated Values: 0 undefined 1 active 2 inactive	.1.3.6.1.4.1.2544.1.14.5.10.1.1.8

Table of maintenance actions of monitor ports.

maintainEntry row .1.3.6.1.4.1.2544.1.14.6.1.1

Indexes

portId

Column	Syntax	OID
maintainOperationRequest Set request to initiate OTDR measurement. It can be performed only if portAdminState is in Mgt state except of runOtdrMeasurement (3), runFaultAnalysis (4) and runResetMeanValues (7) which can be performed also if portA…	Enumerationr/w Enumerated Values: 1 none 2 runFingerprintGeneration 3 runOtdrMeasurement 4 runFaultAnalysis 5 runFingerprintGpon 6 runFingerprintWithoutReflector 7 runResetMeanValues 8 runFingerprintPes 9 runLossCalculationPointUpdate	.1.3.6.1.4.1.2544.1.14.6.1.1.1
maintainOperationRefractiveIndex Refractive index multiplied by 1000000. Parameter must be provided for Fingerprint generation or OTDR measurement.	Integer32r/w Constraints: range: 1400000-1550000	.1.3.6.1.4.1.2544.1.14.6.1.1.2
maintainOperationExternalOffset External offset length in meters. Parameter must be provided for Fingerprint generation or OTDR measurement.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2544.1.14.6.1.1.3
maintainOperationCouplerLoss Coupler loss in tenth of dB. Parameter must be provided for Fingerprint generation.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2544.1.14.6.1.1.4
maintainOperationOtdrLength Measurement length in meters. Parameter must be provided for OTDR measurement. On 16ALM the allowed range is 100..35000.	Integer32r/w Constraints: range: 100-200000	.1.3.6.1.4.1.2544.1.14.6.1.1.5
maintainOperationOtdrPowerLevel Power level in 0.01dBm. Parameter must be provided for OTDR measurement. Not available on 16ALM-1650D.	Integer32r/w Constraints: range: -2000-2000	.1.3.6.1.4.1.2544.1.14.6.1.1.6
maintainOperationOtdrPulseWidth Pulse width in ns. Parameter must be provided for OTDR measurement. On 16ALM the allowed range is 25..1000.	Integer32r/w Constraints: range: 5-20000	.1.3.6.1.4.1.2544.1.14.6.1.1.7
maintainOperationOtdrAverageRate Average rate (0=512,1=1024,2=2048,3=4096,4=8192,5=16384,6=32768,7=65536). Parameter must be provided for OTDR measurement. Not available on 16ALM-1650D.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2544.1.14.6.1.1.8
maintainOperationState The current status of a measurement. When failure is set then maintainOperationLastError is applicable.	Enumeration Enumerated Values: 1 idle 2 waiting 3 fingerprintGenerationRunning 4 otdrMeasurementRunning 5 faultAnalysisRunning 6 failure	.1.3.6.1.4.1.2544.1.14.6.1.1.9
maintainOperationLastError The latest failure of the maintain operation action. Applicable only when maintainOperationState is set to 'failure'.	Enumeration Enumerated Values: 1 noError 2 reflectionPointNotFound 3 noSpaceLeft 4 internalError 5 lossCalculationPointNotFound 6 deprecatedFingerprintVersion	.1.3.6.1.4.1.2544.1.14.6.1.1.10
maintainOperationNumConnectors Default value is taken from system.lossGuidance	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2544.1.14.6.1.1.11
maintainOperationNumSplices Default value is taken from system.lossGuidance	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.2544.1.14.6.1.1.12
maintainOperationMaxLaserPower Maximal laser power used for Fingerprint generation or OTDR measurement in 0.01dBm. Parameter must be provided for Fingerprint generation or OTDR measurement. The value '-1' correspond to the maximal laser power. For GP…	Integer32r/w Constraints: range: -1-1500	.1.3.6.1.4.1.2544.1.14.6.1.1.13
maintainOperationOtdrLinkLength Length of the optical link in meters. Parameter must be provided for OTDR measurement (max. 200000 meters) and fingerprint without reflector (max. 300000 meters) and must be greater or equal than maintainOperationOtdrLe…	Integer32r/w Constraints: range: 100-300000	.1.3.6.1.4.1.2544.1.14.6.1.1.14
maintainOperationOtdrMeasTime Measurement time in seconds. Parameter must be provided for OTDR measurement. Not available on 16ALM.	Integer32r/w Constraints: range: 15-300	.1.3.6.1.4.1.2544.1.14.6.1.1.15
maintainOperationDwdmMode This variable is set to 'enabled' to allow DWDM measurements else only standard non DWDM measurements can be done.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.2544.1.14.6.1.1.16
maintainOperationLossCalculationPoint Loss between the origin of the optical link and the loss calculation point is used for the bidirectional measurements or other measurements without reflector. Set to 0 to enable maintainOperationExpectedLoss for Fingerp…	Integer32r/w Constraints: range: 0-0 range: 500-150000	.1.3.6.1.4.1.2544.1.14.6.1.1.17
maintainOperationFastMode This variable is set to 'enabled' to activate faster OTDR measurements with less accuracy.	Enumerationr/w Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.2544.1.14.6.1.1.18
maintainOperationMonitoringMode This variables decides which measurements method will be used for monitoring.	Enumerationr/w Enumerated Values: 1 lossCalculation 2 trafficCheck 3 standard 4 highDynamic 5 highResolution	.1.3.6.1.4.1.2544.1.14.6.1.1.19
maintainOperationExpectedLoss Expected loss in tenth of dB. Between 5 and 35 db. Parameter maintainOperationLossCalculationPoint must be set to 0 for it to be used.	Integer32r/w Constraints: range: 0-0 range: 50-350	.1.3.6.1.4.1.2544.1.14.6.1.1.20

Table of trace management of monitor ports.

otdrTraceMgmtEntry row .1.3.6.1.4.1.2544.1.14.7.1.1

Indexes

portId

Column	Syntax	OID
otdrTraceMgmtRequest Set request to initiate software management related action	Enumerationr/w Enumerated Values: 1 none 2 exportOmTrace 3 exportFaTrace 4 exportFpTrace 5 exportAutoFaTrace 6 exportOmTraceFiltered 7 exportFaTraceFiltered 8 exportFpTraceFiltered 9 exportAutoFaTraceFiltered 10 exportOmSor 11 exportFaSor 12 exportFpSor 13 exportAutoFaSor 14 exportOmSorFiltered 15 exportFaSorFiltered 16 exportFpSorFiltered 17 exportAutoFaSorFiltered	.1.3.6.1.4.1.2544.1.14.7.1.1.1
otdrTraceMgmtState The current status of the export/upload of OTDR traces. When failure is set then otdrTraceMgmtLastError is applicable.	Enumeration Enumerated Values: 1 idle 4 exportingAutoFaTrace 5 exportingOmTrace 6 exportingFaTrace 7 exportingFpTrace 8 failure	.1.3.6.1.4.1.2544.1.14.7.1.1.2
otdrTraceMgmtLastError The latest failure of the export/upload of OTDR traces process. Applicable only when otdrTraceMgmtState is set to 'failure'. NOTE: All failures that are caused by malfunctioning hardware are reported as internalEr…	Enumeration Enumerated Values: 1 noError 2 transferLoginFailed 3 transferFileNotFound 4 transferFileNoAccess 5 transferServerUnreachable 6 transferFailed 7 missingOtdrTrace 8 wrongOtdrTraceIndex 9 internalError 10 noSpaceLeft	.1.3.6.1.4.1.2544.1.14.7.1.1.3
otdrTraceMgmtServerAddress The IP address of the external FTP/SCP server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.14.7.1.1.4
otdrTraceMgmtServerLogin The login name on the external FTP/SCP server.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.7.1.1.5
otdrTraceMgmtServerPasswd The password on the external FTP/SCP server. Read requests on this object will return a zero-length string.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.7.1.1.6
otdrTraceMgmtServerDirectory The OTDR trace destination location (path) on the external FTP/SCP server.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.7.1.1.7
otdrTraceMgmtFileName Target File Name of the trace without extension. Extension is either 'sor' or 'csv'. Depends on the selected OTDR Trace Management Request	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.7.1.1.8
otdrTraceMgmtTransferProtocol The transfer protocol to be used.	Enumerationr/w Enumerated Values: 1 ftp 2 scp	.1.3.6.1.4.1.2544.1.14.7.1.1.9
otdrTraceMgmtFtpPort The TCP port number of the FTP server used for file transfer. Default value is 21.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2544.1.14.7.1.1.10
otdrTraceMgmtActionProgress Operational progress in % i.e. file transfer	%Integer32 Constraints: range: -2147483648--2147483648 range: 0-100	.1.3.6.1.4.1.2544.1.14.7.1.1.11
otdrTraceMgmtAutoFaReference Fault Analysis reference number. A value of 0 means the latest auto-generated fault analysis is exported.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2544.1.14.7.1.1.12
otdrTraceMgmtIpv6Address The IPv6 address of the external FTP/SCP server.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.14.7.1.1.13