This trap is sent if tempCPU value crossed tresholdMaxTempCPU threshold.
alarmFpMissing
.1.3.6.1.4.1.2544.1.14.0.10
This trap is related with situation when fingerprint was not calculated for
a port. The relevant alarm in alarmTable refering to this trap will be set/cleared.
alarmThresCrossedFast
.1.3.6.1.4.1.2544.1.14.0.11
This trap is sent if the absolute value of measurementLossDevFast exceeded
portThresDeviationFast threshold.
alarmThresCrossedMedium
.1.3.6.1.4.1.2544.1.14.0.12
This trap is sent if the absolute value of measurementLossDevMedium exceeded
portThresDeviationMedium threshold.
alarmThresCrossedSlow
.1.3.6.1.4.1.2544.1.14.0.13
This trap is sent if the absolute value of measurementLossDevSlow exceeded
portThresDeviationSlow threshold.
alarmLinkBudgetExceeded
.1.3.6.1.4.1.2544.1.14.0.14
This trap is sent if measurementLossLinkLoss value exceeded portThresBudget threshold.
alarmLinkBudgetNearlyExceeded
.1.3.6.1.4.1.2544.1.14.0.15
This trap is sent if measurementLossLinkLoss value exceeded portThresCloseToBudget threshold.
alarmManagementState
.1.3.6.1.4.1.2544.1.14.0.16
This trap is sent each time when portAdminState is changed from/to mgt(4) value.
alarmDisabledState
.1.3.6.1.4.1.2544.1.14.0.17
This trap is sent each time when portAdminState is changed from/to dsbld(6) value.
stateChangedTrap
.1.3.6.1.4.1.2544.1.14.0.18
This trap is sent when an entity state is changed (OperState or AdminState).
Additionally this trap will contain changed object: portOperState or portAdminState
objectChangedTrap
.1.3.6.1.4.1.2544.1.14.0.19
This trap is sent when an object such as alarm severity or threshold is changed
Additionally this trap will contain changed object, portAidString, aidString, if relevant
alarmTempBoard1
.1.3.6.1.4.1.2544.1.14.0.2
This trap is sent if tempBoard1 (CPU board) value crossed tresholdMaxTempBoard1 threshold.
Not used on 16ALM-1650D.
trapsinkCreatedTrap
.1.3.6.1.4.1.2544.1.14.0.20
This trap is sent every time an new entry is added to the trapsinkTable or ipv6TrapsinkTable
trapsinkDeletedTrap
.1.3.6.1.4.1.2544.1.14.0.21
This trap is sent every time an new entry is removed from the trapsinkTable or ipv6TrapsinkTable
transient15MinMeasCollected
.1.3.6.1.4.1.2544.1.14.0.22
This trap is every time when all the measurement data for all the port are
collected for selected period
transient1DayMeasCollected
.1.3.6.1.4.1.2544.1.14.0.23
This trap is every time when all the measurement data for all the port are
collected for selected period
transientFpStarted
.1.3.6.1.4.1.2544.1.14.0.24
This trap is sent when fingerprint monitoring has started
transientFpCompleted
.1.3.6.1.4.1.2544.1.14.0.25
This trap is sent when fingerprint monitoring has completed with success
transientFpFailed
.1.3.6.1.4.1.2544.1.14.0.26
This trap is sent when fingerprint monitoring has ended with failure
transientSwMgmtActionStarted
.1.3.6.1.4.1.2544.1.14.0.27
This trap is sent when any action related with Software
Management is initiated. In case of file-transfer related
operations it will contain softwareMgmtFileName varbind.
transientSwMgmtActionCompleted
.1.3.6.1.4.1.2544.1.14.0.28
This trap is sent when any action related with Software
Management is successfully completed. In case of file-transfer
related operations it will contain softwareMgmtFileName
varbind.
transientSwMgmtActionFailed
.1.3.6.1.4.1.2544.1.14.0.29
This trap is sent when any action related with Software
Management failed. In case of file-transfer related
operations it will contain softwareMgmtFileName
varbind.
alarmTempBoard2Low
.1.3.6.1.4.1.2544.1.14.0.3
This trap is sent if tempBoard2 (laser board) value crossed tresholdMinTempBoard2 threshold.
transientDbMgmtActionStarted
.1.3.6.1.4.1.2544.1.14.0.30
This trap is sent when any action related with Database
Management is initiated. In case of file-transfer related
operations it will contain additionally databaseMgmtFileName
varbind.
transientDbMgmtActionCompleted
.1.3.6.1.4.1.2544.1.14.0.31
This trap is sent when any action related with Database
Management is successfully completed. In case of file-transfer
related operations it will contain additionally
databaseMgmtFileName varbind.
transientDbMgmtActionFailed
.1.3.6.1.4.1.2544.1.14.0.32
This trap is sent when any action related with Database
Management failed. In case of file-transfer related
operations it will contain additionally
databaseMgmtFileName varbind.
alarmNtpServerUnreachable
.1.3.6.1.4.1.2544.1.14.0.33
Trap to be sent when NTP servers are unreachable.
transientFpSaved
.1.3.6.1.4.1.2544.1.14.0.34
This trap is sent when a completed fingerprint measurement is saved as current fingerprint.
transientMonStarted
.1.3.6.1.4.1.2544.1.14.0.35
This trap is sent when monitoring of the particular port was enabled.
transientMonStopped
.1.3.6.1.4.1.2544.1.14.0.36
This trap is sent when monitoring of the particular port was diabled.
transientOtdrMeasurementStarted
.1.3.6.1.4.1.2544.1.14.0.37
This trap is sent when manual OTDR measurement was intitiated.
transientOtdrMeasurementCompleted
.1.3.6.1.4.1.2544.1.14.0.38
This trap is sent when manual OTDR measurement is completed.
transientOtdrMeasurementFailed
.1.3.6.1.4.1.2544.1.14.0.39
This trap is sent when manual OTDR measurement failed.
alarmTempBoard2High
.1.3.6.1.4.1.2544.1.14.0.4
This trap is sent if tempBoard2 (laser board) value crossed tresholdMaxTempBoard2 threshold.
transientOtdrMeasurementSaved
.1.3.6.1.4.1.2544.1.14.0.40
This trap is sent when data of manual OTDR measurement was saved.
transientFaStarted
.1.3.6.1.4.1.2544.1.14.0.41
This trap is sent when fault analysis in initiated.
transientFaCompleted
.1.3.6.1.4.1.2544.1.14.0.42
This trap is sent when fault analysis is completed.
transientFaFailed
.1.3.6.1.4.1.2544.1.14.0.43
This trap is sent when fault analysis is completed.
transientFaSaved
.1.3.6.1.4.1.2544.1.14.0.44
This trap is sent when the data of a completed fault analysis was saved.
transientInternalError
.1.3.6.1.4.1.2544.1.14.0.45
This trap is sent when some critical error happened which affects monitoring capabilities
alarmRebootRunning
.1.3.6.1.4.1.2544.1.14.0.46
This trap is to inform user that rebooting of system started
alarmWarmupRunning
.1.3.6.1.4.1.2544.1.14.0.47
This trap is sent when to inform a user about starting/finishing warming up process.
alarmBadSysStat
.1.3.6.1.4.1.2544.1.14.0.48
This trap is sent when some critical error happened due to hardware failure.
alarmWrongFWVersion
.1.3.6.1.4.1.2544.1.14.0.49
This trap is sent when alarm informing about the fact that firmware version is not up to date is raised/cleared.
Not used on 16ALM-1650D.
alarmTempLaserLow
.1.3.6.1.4.1.2544.1.14.0.5
This trap is sent if tempLaser value crossed tresholdMinTempLaser threshold.
Not used on 16ALM-1650D.
alarmMonProcNotRunning
.1.3.6.1.4.1.2544.1.14.0.50
This trap is sent when some critical error happened which affects monitoring capabilities of the unit.
transientFaDeleted
.1.3.6.1.4.1.2544.1.14.0.51
This trap is sent when fault analysis was deleted.
transientOtdrMeasurementDeleted
.1.3.6.1.4.1.2544.1.14.0.52
This trap is sent when manual OTDR measurement was deleted.
transientOtdrTraceMgmtActionStarted
.1.3.6.1.4.1.2544.1.14.0.53
This trap is sent when any action related with OTDR Trace
Management is initiated.
transientOtdrTraceMgmtActionCompleted
.1.3.6.1.4.1.2544.1.14.0.54
This trap is sent when any action related with OTDR Trace
Management is successfully completed.
transientOtdrTraceMgmtActionFailed
.1.3.6.1.4.1.2544.1.14.0.55
This trap is sent when any action related with OTDR Trace
Management failed.
alarmAlmPackageMismatch
.1.3.6.1.4.1.2544.1.14.0.56
This trap is sent when softwareVersion and
expectedSoftwareVersion values do not match and
expectedSoftwareVersion value is not empty and
operationMode is set to 'standalone'.
alarmEmailNotifyThresCrossedFast
.1.3.6.1.4.1.2544.1.14.0.57
This trap is sent if the absolute value of measurementLossDevFast exceeded
portThresDeviationFast threshold and the corresponding automatic fault
analysis measurement has been completed.
alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
alarmEmailNotifyThresCrossedMedium
.1.3.6.1.4.1.2544.1.14.0.58
This trap is sent if the absolute value of measurementLossDevMedium exceeded
portThresDeviationMedium threshold and the corresponding automatic fault
analysis measurement has been completed.
alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
alarmEmailNotifyThresCrossedSlow
.1.3.6.1.4.1.2544.1.14.0.59
This trap is sent if the absolute value of measurementLossDevSlow exceeded
portThresDeviationSlow threshold and the corresponding automatic fault
analysis measurement has been completed.
alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
alarmTempLaserHigh
.1.3.6.1.4.1.2544.1.14.0.6
This trap is sent if tempLaser value crossed tresholdMaxTempLaser threshold.
Not used on 16ALM-1650D.
alarmEmailNotifyLinkBudgetExceeded
.1.3.6.1.4.1.2544.1.14.0.60
This trap is sent if measurementLossLinkLoss value exceeded portThresBudget
threshold and the corresponding automatic fault analysis measurement has
been completed.
alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
alarmEmailNotifyLinkBudgetNearlyExceeded
.1.3.6.1.4.1.2544.1.14.0.61
This trap is sent if measurementLossLinkLoss value exceeded portThresCloseToBudget
threshold and the corresponding automatic fault analysis measurement has
been completed.
alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
authenticationNotification
.1.3.6.1.4.1.2544.1.14.0.62
This trap is sent when authentication event happens.
authenticationNotificationSummary
.1.3.6.1.4.1.2544.1.14.0.63
This trap is sent when authentication event happens more often than 5 times within 10 seconds.
monitorPointCreated
.1.3.6.1.4.1.2544.1.14.0.64
This trap is sent when Monitor Point was created
monitorPointDeleted
.1.3.6.1.4.1.2544.1.14.0.65
This trap is sent when Monitor Point was deleted
alarmLossDeviationHigh
.1.3.6.1.4.1.2544.1.14.0.66
This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorThresDeviation.
alarmLossHigh
.1.3.6.1.4.1.2544.1.14.0.67
This trap is sent if monitorPointLossCurrentLoss value exceeded portMonitorThresLossBudget.
alarmRootLinkFault
.1.3.6.1.4.1.2544.1.14.0.68
PON: This trap is sent if alarmLossHigh or alarmLossDeviationHigh is present for all Monitor Points.
PES: This trap is sent if the Last Reflection changes.
transientResetMeansStarted
.1.3.6.1.4.1.2544.1.14.0.69
This trap is sent when reset mean value action has started
alarmMonNotRunning
.1.3.6.1.4.1.2544.1.14.0.7
This trap is related with enabling/disabling monitoring function by user.
The relevant alarm in alarmTable refering to this trap will be set/cleared.
transientResetMeansCompleted
.1.3.6.1.4.1.2544.1.14.0.70
This trap is sent when reset mean value action has completed with success
transientResetMeansFailed
.1.3.6.1.4.1.2544.1.14.0.71
This trap is sent when reset mean value action has ended with failure
alarmTrafficOutage
.1.3.6.1.4.1.2544.1.14.0.72
This trap is sent when DWDM traffic on the specific port was not detected any longer
userAdded
.1.3.6.1.4.1.2544.1.14.0.73
This trap is sent when user was added
userDeleted
.1.3.6.1.4.1.2544.1.14.0.74
This trap is sent when user was deleted
customizedFpEventCreated
.1.3.6.1.4.1.2544.1.14.0.75
This trap is sent when a customized Fingerprint Event was created
customizedFpEventDeleted
.1.3.6.1.4.1.2544.1.14.0.76
This trap is sent when a customized Fingerprint Event was deleted
transientExportMgmtActionStarted
.1.3.6.1.4.1.2544.1.14.0.77
This trap is sent when any action related with Export
Management is initiated. In case of file-transfer related
operations it will contain additionally exportMgmtFileName
varbind.
transientExportMgmtActionCompleted
.1.3.6.1.4.1.2544.1.14.0.78
This trap is sent when any action related with Export
Management is successfully completed. In case of file-transfer
related operations it will contain additionally
exportMgmtFileName varbind.
transientExportMgmtActionFailed
.1.3.6.1.4.1.2544.1.14.0.79
This trap is sent when any action related with Export
Management failed. In case of file-transfer related
operations it will contain additionally
exportMgmtFileName varbind.
alarmFpRunning
.1.3.6.1.4.1.2544.1.14.0.8
This trap is related with initiating/finishing fingerprint calculation.
The relevant alarm in alarmTable refering to this trap will be set/cleared.
Not used on 16ALM-1650D.
alarmSensor1High
.1.3.6.1.4.1.2544.1.14.0.80
This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorSensor1Thres.
alarmSensor2High
.1.3.6.1.4.1.2544.1.14.0.81
This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorSensor2Thres.
alarmEmailNotifyRootLinkFault
.1.3.6.1.4.1.2544.1.14.0.82
This trap is sent if alarmRootLinkFault is set
and the corresponding automatic fault analysis measurement has
been completed.
alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
transientTimeChange
.1.3.6.1.4.1.2544.1.14.0.83
This trap is sent if a time step occured (manually or ntp)
alarmTopologyChanged
.1.3.6.1.4.1.2544.1.14.0.84
This trap is sent if the Link Topology has changed
alarmEmailNotifyLossDeviationHigh
.1.3.6.1.4.1.2544.1.14.0.85
This trap is sent if difference between monitorPointLossCurrentLoss and
monitorPointLossFpLoss exceeded portMonitorThresDeviation
and the corresponding automatic fault analysis measurement has
been completed.
alarmEmailNotifyLossHigh
.1.3.6.1.4.1.2544.1.14.0.86
This trap is sent if monitorPointLossCurrentLoss value exceeded
portMonitorThresLossBudget and the corresponding automatic
fault analysis measurement has been completed.
alarmEmailNotifySensor1High
.1.3.6.1.4.1.2544.1.14.0.87
This trap is sent if difference between monitorPointLossCurrentLoss and
monitorPointLossFpLoss exceeded portMonitorSensor1Thres and the
corresponding automatic fault analysis measurement has been completed.
alarmEmailNotifySensor2High
.1.3.6.1.4.1.2544.1.14.0.88
This trap is sent if difference between monitorPointLossCurrentLoss and
monitorPointLossFpLoss exceeded portMonitorSensor2Thres and the
corresponding automatic fault analysis measurement has been completed.
alarmFaRunning
.1.3.6.1.4.1.2544.1.14.0.9
This trap is related with initiating/finishing fault analysis.
The relevant alarm in alarmTable refering to this trap will be set/cleared.