ADTRAN-TAMINIDSLAM3G-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
11
Rows
11
Columns
88
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1 · 1 row entry · 14 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gInfoTable'
This table contains all objects for provisioning the DSLAM
at the shelf level.
adGenMiniDslam3gInfoEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1
An entry in the adGenMiniDslamShelfInfoTable.
Column Syntax OID
User temperature threshold in degrees
celcius.
Integer32r/w
Constraints:
range: -40-125
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.1
Used to enable or disable the
adGenMiniDslamShelfUserTempActive trap.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.2
Used to enable or disable the DSP warm start
function.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.3
Current temperature of the shelf
in degrees celcius.
Integer32
Constraints:
range: -40-125
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.4
Fan number on the fan tray. This object
is intended to be returned only as a
varbind for a notification, therefore
reading this variable is normally undefined.
Integer32
Constraints:
range: 1-99
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.5
Reason that a DSP was reset. This object
is intended to be returned only as a
varbind for a notification, therefore
reading this variable is normally undefined.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.6
Sets the priority threshold for downstream rate limiting.
Downstream traffic is rate limited up to the VID specified.
Traffic which is tagged with a higher priority than what is
set here will not be limited. To limit al…
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.7
This object is intended to be returned only as a varbind
for the adGenMiniDslamAdslCircuitIdChange notification below.

This object is a comma delimited list of all the ports and associated
ports which hav…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.8
The first Multicast IP Address in a range of IP addresses
that are used by the Multicast Session Control.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.9
The last Multicast IP Address in a range of IP addresses
that are used by the Multicast Session Control.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.10
Used to set the bitrate associated with the multicast IP address range
of the Multicast Session Control.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.11
Used on the switch to determine how long to wait before MAC table
entries are removed from the table. If 0 is specified, then the
switch will learn and lock each MAC address.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.12
Used to enable or disable the
Legacy Deployment provisioning for a third generation DSLAM
to work under a TA1x00.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.13
Used to determine the provisioned bonding mode on products that can
not suppot ATM and EFM bonding simultaneously.
Enumeration
Enumerated Values:
1atm
2efm
.1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.14
.1.3.6.1.4.1.664.6.10000.61.5.1.1.3 · 1 row entry · 6 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gTestTable'
This table contains all objects for performing tests on
the DSLAM at the slot level.
adGenMiniDslam3gTestEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1
An entry in the adGenMiniDslam3gTestTable.
Column Syntax OID
Selected port number for test operation.
This is functionally equivalent to the
adGenPortInfoIndex of the selected interface.
Integer32r/w
Constraints:
range: 1-48
.1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.1
Name of the file to be transmitted via TFTP
containing all of the test data for the selected
interface.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.2
Used to initiate the SELT test for the ADSL port. When
the SELT test has completed the data file will automatically
be tranferred using TFTP to the server specified by
adGenChassisTftpAddr. A get is meaningless and alw…
Enumerationr/w
Enumerated Values:
1start
.1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.3
Used to initiate the DELT test for the ADSL port. When
the DELT test has completed the data file will automatically
be tranferred using TFTP to the server specified by
adGenChassisTftpAddr. A get is meaningless and alw…
Enumerationr/w
Enumerated Values:
1start
.1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.4
Used to cancel any test running for the selected the ADSL port.
A get is meaningless and always returns stop(1).
Enumerationr/w
Enumerated Values:
1stop
.1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.5
Status of the currently active SELT or DELT
test.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.6
.1.3.6.1.4.1.664.6.10000.61.5.1.1.4 · 1 row entry · 6 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gAdslProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gAdslProvTable'
This table contains objects for provisioning the DSLAM
ADSL Ports.
adGenMiniDslam3gAdslProvEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1
An entry in the adGenMiniDslam3gAdslProvTable.
Indexes
Column Syntax OID
Enable Retrain criteria for UAS NE.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.1
Enable Retrain criteria for SNR Margin NE.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.2
Enable Retrain criteria for SES FE.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.3
Enable Retrain criteria for UAS FE.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.4
Enable Retrain criteria for SNR Margin FE.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.5
Sets the downstream rate limit in bps.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.6
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5 · 1 row entry · 19 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gMacTable'
Subscriber Mac Table.
adGenMiniDslam3gMacEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1
Each entry corresponds to an entry in the Subscriber Mac Table.
The ifIndex used here is the customer etherlike port ifIndex
associated with the DSL port of interest.
Column Syntax OID
Index of the entry. Each port can have 0 up
to the maximum number allowed for a port, given by the object
adGenIpPortMaxMacAddr.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.1
Mac Address for this entry.
OctetString .1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.2
VLAN ID
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.3
Entry is typically dynamic or static.
Enumeration
Enumerated Values:
1other
2invalid
3dynamic
4static
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.4
IP Address for this entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.5
The expiration counter for this entry, in seconds.
When the count reaches 0, the entry will be removed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.6
The gateway's MAC address.
OctetString .1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.7
The gateway's IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.8
The interface state reflects the state
of the current session.

0: PPPoEInitialize(0)
1: PPPoEDiscoveryInitiation(1)
2: PPPoEDiscoveryOffer(2)
3: PPPoEDiscoveryRequest(3)
4: PPPoEDiscoverySession…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.9
The DHCP transaction ID, or for PPPoX sessions,
the PPPoX session ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.10
The encapsulation mode for this entry (i.e. DHCP, PPPoE, etc.)
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.11
Timestamp for when entry was created.
This is given based off of system uptime, and
the units are seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.12
VPI for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.13
VCI for this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.14
C-Tag ID for this entry.
A value of 4095 indicates that no CEVlan is present.
A value of 4097 indicates that customer traffic can
be tagged or untagged.
A value of 4098 indicates that customer traffic is tagged only.
Integer32
Constraints:
range: 0-4098
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.15
CE-Vlan ID for this entry.
A value of 0 indicates priority tagged traffic
A value of 4095 indicates that no CEVlan is present.
A value of 4097 indicates that customer traffic can
be tagged or untagged.
A value of 4098 i…
Integer32
Constraints:
range: 0-4098
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.16
A value that represents a type of Internet address.

unknown(0) An unknown address type. This value MUST
be used if the value of the corresponding
InetAddress object is a zero-length string.
It may also be…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.17
Denotes a generic Internet address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.18
Denotes the length of a generic Internet
network address prefix. A value of n corresponds to
an IP address mask that has n contiguous 1-bits from
the most significant bit (MSB), with all other bits
set to 0.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.19
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1 · 1 row entry · 7 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gPerf15MinCurrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gPerf15MinCurrTable'
This table contains all the current 15-minute performance statistics
for a given port.
adGenMiniDslam3gPerf15MinCurrEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1
Each entry corresponds to current 15-minute performance
interval. The ifIndex used should be the ether-like interface
for the physical port of interest (either ethernetCsmac(6)
or propVirtual(53).
Indexes
Column Syntax OID
Ingress packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.1
Ingress bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.2
Egress packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.3
Egress bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.4
Egress overflow packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.5
Egress overflow bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.6
The number of valid historical 15-minute
intervals.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2 · 1 row entry · 7 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gPerf15MinIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gPerf15MinIntTable'
This table contains all the historical 15-minute performance statistics
for a given port and 15-minute interval.
adGenMiniDslam3gPerf15MinIntEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1
Each entry corresponds to a 15-minute performance interval. The ifIndex
used should be the ether-like interface for the physical port of interest
(either ethernetCsmac(6) or propVirtual(53).
Column Syntax OID
Index for interval number. 1 is the most recently
completed 15-minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.1
Ingress packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.2
Ingress bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.3
Egress packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.4
Egress bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.5
Egress overflow packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.6
Egress overflow bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3 · 1 row entry · 7 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gPerfDailyCurrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gPerfDailyCurrTable'
This table contains all the current daily performance statistics
for a given port.
adGenMiniDslam3gPerfDailyCurrEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1
Each entry corresponds to current daily performance interval. The ifIndex
used should be the ether-like interface for the physical port of interest
(either ethernetCsmac(6) or propVirtual(53).
Indexes
Column Syntax OID
Ingress (received) packets for the current
day.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.1
Engress (received) bytes for the current
day.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.2
Egress (transmit) packets for the
current day.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.3
Egress (transmit) bytes for the current
day.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.4
Egress (transmit) overflow packets for the current
day.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.5
Egress (transmit) overflow bytes for the current
day.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.6
The number of historical daily intervals that are
available for retrieval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4 · 1 row entry · 7 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gPerfDailyIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gPerfDailyIntTable'
This table contains all the historical daily performance statistics
for a given port and day.
adGenMiniDslam3gPerfDailyIntEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1
Each entry corresponds to a daily performance interval. The ifIndex
used should be the ether-like interface for the physical port of interest
(either ethernetCsmac(6) or propVirtual(53).
Column Syntax OID
Index for interval number. 1 is the most recently
completed interval (previous day).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.1
The number of ingress (received) packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.2
The number of ingress (received) bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.3
The number of egress (transmitted) packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.4
The number of egress (transmitted) bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.5
Egress overflow packets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.6
Egress overflow bytes.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.7 · 1 row entry · 3 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gVlanVcMapProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gVlanVcMapProfileTable'
This table contains information on the VLAN mappings
in an ATM-oriented system (i.e., 'cross-connects'
between VLANs and VCLs).  One entry in this
table reflects a profile defined by a manager
which can be used to provision a VLAN-to-VCL
mapping.
adGenMiniDslam3gVlanVcMapProfileEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.7.1
Each entry corresponds to an Ethernet/VLAN-to-VCL
Mapping Profile. The ifIndex used here is the GigE ifIndex
associated with the DSL port of interest.
Column Syntax OID
The VPI for this entry
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.7.1.1
The VCI for this entry
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.7.1.2
The VID for this entry
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.7.1.3
.1.3.6.1.4.1.664.6.10000.61.5.1.1.8 · 1 row entry · 3 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gSpanPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gSpanPowerTable'
This table contains objects used to manage a
span power supply if so equipped.
adGenMiniDslam3gSpanPowerEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.8.1
Each entry corresponds to a particular span power channel
to a span powered power supply. A single or multiple
span power channels may be used by a span powered device
in this system.
Column Syntax OID
Number of the span power channel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.6.10000.61.5.1.1.8.1.1
Used to enable or disable alarm reporting for the
specified span power channel.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.664.6.10000.61.5.1.1.8.1.2
Used to determine if span power is present on the channel.
Enumeration
Enumerated Values:
1powered
2unPowered
.1.3.6.1.4.1.664.6.10000.61.5.1.1.8.1.3
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9 · 1 row entry · 9 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenMiniDslam3gGigeProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAMINIDSLAM3G-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAMINIDSLAM3G-MIB::adGenMiniDslam3gGigeProvTable'
This table contains objects for provisioning the DSLAM
Gigabit Ethernet Ports.
adGenMiniDslam3gGigeProvEntry row .1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1
An entry in the adGenMiniDslam3gGigeProvTable.
Indexes
Column Syntax OID
Remap priority 0 to the specified value. Packets are reassigned
at ingress. Setting this object to 0 will not modify the priority.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.1
Remap priority 1 to the specified value. Packets are reassigned
at ingress. Setting this object to 1 will not modify the priority.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.2
Remap priority 2 to the specified value. Packets are reassigned
at ingress. Setting this object to 2 will not modify the priority.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.3
Remap priority 3 to the specified value. Packets are reassigned
at ingress. Setting this object to 3 will not modify the priority.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.4
Remap priority 4 to the specified value. Packets are reassigned
at ingress. Setting this object to 4 will not modify the priority.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.5
Remap priority 5 to the specified value. Packets are reassigned
at ingress. Setting this object to 5 will not modify the priority.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.6
Remap priority 6 to the specified value. Packets are reassigned
at ingress. Setting this object to 6 will not modify the priority.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.7
Remap priority 7 to the specified value. Packets are reassigned
at ingress. Setting this object to 7 will not modify the priority.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.8
Resets all pbit remapping objects to the disabled states (e.g.
RemapPbit0 = 0, RemapPbit1 = 1, etc.). A get is meaningless and
will always return reset(1).
Enumerationr/w
Enumerated Values:
1reset
.1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.9