ADTRAN-TA5K-SingleDS3-MIB

        Total Access 5000 Single Port DS3 1187200L1 MIB
    
Source file
ADTRAN-TA5K-SingleDS3-MIB
Last revised
Identity
adTa5kSingleDs3ModuleIdentity
Base OID
1.3.6.1.4.1.664.6.896
Net-SNMP examples using the adtran MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ADTRAN-TA5K-SingleDS3-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ADTRAN-TA5K-SingleDS3-MIB::adTa5kSingleDs3ModuleIdentity'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TA5K-SingleDS3-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TA5K-SingleDS3-MIB::adTa5kSingleDs3ModuleIdentity'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (26)
.1.3.6.1.4.1.664.1.896
.1.3.6.1.4.1.664.1.896.0
.1.3.6.1.4.1.664.2.896
.1.3.6.1.4.1.664.2.896.1
.1.3.6.1.4.1.664.2.896.1.1
.1.3.6.1.4.1.664.2.896.1.1.1
Enumeration
.1.3.6.1.4.1.664.2.896.1.1.1.1
Enumeration
.1.3.6.1.4.1.664.2.896.1.1.1.2
.1.3.6.1.4.1.664.2.896.3
.1.3.6.1.4.1.664.2.896.3.1
.1.3.6.1.4.1.664.2.896.3.1.1
Enumeration
.1.3.6.1.4.1.664.2.896.3.1.1.1
.1.3.6.1.4.1.664.2.896.3.1.1.10
.1.3.6.1.4.1.664.2.896.3.1.1.11
.1.3.6.1.4.1.664.2.896.3.1.1.12
Integer32
.1.3.6.1.4.1.664.2.896.3.1.1.2
Enumeration
.1.3.6.1.4.1.664.2.896.3.1.1.3
Integer32
.1.3.6.1.4.1.664.2.896.3.1.1.4
Enumeration
.1.3.6.1.4.1.664.2.896.3.1.1.5
Integer32
.1.3.6.1.4.1.664.2.896.3.1.1.6
Enumeration
.1.3.6.1.4.1.664.2.896.3.1.1.7
Integer32
.1.3.6.1.4.1.664.2.896.3.1.1.8
.1.3.6.1.4.1.664.2.896.3.1.1.9
.1.3.6.1.4.1.664.2.896.6
.1.3.6.1.4.1.664.2.896.6.1
.1.3.6.1.4.1.664.6.896
Dependencies (15) 10 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Notifications / Traps (20)
NameOIDDescription
.1.3.6.1.4.1.664.1.896.0.10
Indicates DS3 loopback state clear
.1.3.6.1.4.1.664.1.896.0.11
Indicates DS3 loopback state active
.1.3.6.1.4.1.664.1.896.0.12
Indicates DS3 Idle signal clear
.1.3.6.1.4.1.664.1.896.0.13
Indicates DS3 Idle signal active
.1.3.6.1.4.1.664.1.896.0.14
Indicates DS3 framer LOS clear.
.1.3.6.1.4.1.664.1.896.0.15
Indicates Backplane Timing Alarm Active.
.1.3.6.1.4.1.664.1.896.0.16
Indicates DS3 framer LOF Alarm Clear.
.1.3.6.1.4.1.664.1.896.0.17
Indicates DS3 framer LOF Alarm Active.
.1.3.6.1.4.1.664.1.896.0.18
Indicates DS3 framer RAI clear.
.1.3.6.1.4.1.664.1.896.0.19
Indicates RAI Alarm Active.
.1.3.6.1.4.1.664.1.896.0.2
Indicates DS3 framer LOS clear.
.1.3.6.1.4.1.664.1.896.0.20
Indicates DS3 framer AIS clear.
.1.3.6.1.4.1.664.1.896.0.21
Indicates AIS Alarm Active.
.1.3.6.1.4.1.664.1.896.0.3
Indicates Backplane Timing Alarm Active.
.1.3.6.1.4.1.664.1.896.0.4
Indicates DS3 framer LOF Alarm Clear.
.1.3.6.1.4.1.664.1.896.0.5
Indicates DS3 framer LOF Alarm Active.
.1.3.6.1.4.1.664.1.896.0.6
Indicates DS3 framer RAI clear.
.1.3.6.1.4.1.664.1.896.0.7
Indicates RAI Alarm Active.
.1.3.6.1.4.1.664.1.896.0.8
Indicates DS3 framer AIS clear.
.1.3.6.1.4.1.664.1.896.0.9
Indicates AIS Alarm Active.