ADTRAN-TA5K-REDUNDANCY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
23

adTa5kEquipmentRedundancyTable

table
.1.3.6.1.4.1.664.5.67.1.1.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adTa5kEquipmentRedundancyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TA5K-REDUNDANCY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TA5K-REDUNDANCY-MIB::adTa5kEquipmentRedundancyTable' 
...
adTa5kEquipmentRedundancyEntry row .1.3.6.1.4.1.664.5.67.1.1.1.1.1
...
Indexes
Column Syntax OID
adTa5kEquipmentRedundancySupported
Supported means this unit will be able to failover to a standby card.
if it is not true, the value returns a reason why the unit cannot failover.
Valid for the active unit only.
Enumeration
Enumerated Values:
1true
2peerNotResponding
3peerIncompatible
4peerNotPresent
5peerNotReady
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.1
adTa5kEquipmentRedundancyRevertive
Enable or disable the property of a protected unit reverting back to the original
operating unit when the original unit's health has returned to normal operating status.
Enabled will revert (after a timeout default=15s)…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.2
adTa5kEquipmentRedundancyRevertiveTimeout
Time in seconds to wait before allowing a protection switch to revert back to the primary unit.
Valid for the active unit only.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.3
adTa5kEquipmentRedundancyForceFailover
Setting this to failover(1) will swap the active and standby status of the redundant modules.
Valid for the active unit only.
Enumerationr/w
Enumerated Values:
1failover
2notapplicable
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.4
adTa5kEquipmentRedundancyState
Equipment Redundancy State.
StandbyNotReady means the unit is the standby, but cannot accept a failover should one occur.
This case occurs when the standby is booting up, or not syncronized with provisioning from the ac…
Enumeration
Enumerated Values:
1active
2standby
3standbyNotReady
4notApplicable
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.5
adTa5kEquipmentRedundancyPeerSlot
The Slot number of the peer.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.6
adTa5kEquipmentRedundancyFeatureEnabled
Enabled if the card is provisioned to operate rendundantly if possible. Disabled
if the card if provisioned for non-redundant operation only.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.7
adTa5kEquipmentRedundancyFacilityType
Shared Facilities: redundant modules share a physical cable/fiber ('y-cable')
Dual Facilities: redundant modules have independent redundant cable/fiber facilities
Separate Facilites: modules and cable/fiber facil…
Enumerationr/w
Enumerated Values:
0sharedFacilities
1dualFacilities
2separateFacilities
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.8
adTa5kEquipmentRedundancyStandbyReasonsCount
Returns a count of the number of rows in the StandbyNotReadyReasonsTable.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.1.1.1.1.9

adTa5kStandbyNotReadyReasonsTable

table
.1.3.6.1.4.1.664.5.67.1.1.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adTa5kStandbyNotReadyReasonsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TA5K-REDUNDANCY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TA5K-REDUNDANCY-MIB::adTa5kStandbyNotReadyReasonsTable' 
This table lists the reasons why a module is in the StandbyNotReady state
adTa5kStandbyNotReadyReasonEntry row .1.3.6.1.4.1.664.5.67.1.1.1.3.1
An entry in the StandbyNotReadyReasonsTable
Indexes
Column Syntax OID
adTa5kStandbyNotReadyReasonIndex
A unique index for each StandbyNotReady reason.
Values range from 1 to adTa5kEquipmentRedundancyStandbyReasonsCount
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.1.1.3.1.1
adTa5kStandbyNotReadyReason
Returns the reason for the StandbyNotReady state.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.67.1.1.1.3.1.2

adTa5kFacilityRedundancyTable

table
.1.3.6.1.4.1.664.5.67.1.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adTa5kFacilityRedundancyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TA5K-REDUNDANCY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TA5K-REDUNDANCY-MIB::adTa5kFacilityRedundancyTable' 
This table is valid for the active unit only.
adTa5kFacilityRedundancyEntry row .1.3.6.1.4.1.664.5.67.1.1.2.1.1
...
Indexes
Column Syntax OID
adTa5kFacilityRedundancySupported
 Enumeration
Enumerated Values:
1protected
2redundantFacilityNotPresent
3redundantFacilityNotCompatible
4redundantFacilityAdminDown
5redundantFacilityLinkDown
6redundantFacilityInUse
7redundantEquipmentAdminDown
 .1.3.6.1.4.1.664.5.67.1.1.2.1.1.1
adTa5kFacilityRedundancyState
 Enumeration
Enumerated Values:
1active
2standby
 .1.3.6.1.4.1.664.5.67.1.1.2.1.1.2
adTa5kFacilityRedundancyForceProtect
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.1.2.1.1.3
adTa5kFacilityRedundancyProtectedByIfIndex
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.1.2.1.1.4

adTa5kRedundancyAlarmProvTable

table
.1.3.6.1.4.1.664.5.67.1.1.4.1 · 1 row entry · 8 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adTa5kRedundancyAlarmProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TA5K-REDUNDANCY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TA5K-REDUNDANCY-MIB::adTa5kRedundancyAlarmProvTable' 
...
adTa5kRedundancyAlarmProvEntry row .1.3.6.1.4.1.664.5.67.1.1.4.1.1
...
Indexes
Column Syntax OID
adTa5kRedundancyAlarmProvCardActiveEnable
True - alarm is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.67.1.1.4.1.1.1
adTa5kRedundancyAlarmProvProtectionUnavailableEnable
True - alarm is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.67.1.1.4.1.1.2
adTa5kRedundancyAlarmProvPeerCodeVersionMismatchEnable
True - alarm is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.67.1.1.4.1.1.3
adTa5kRedundancyAlarmProvPeerDbMirroringSyncInProgressEnable
True - alarm is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.67.1.1.4.1.1.4
adTa5kRedundancyAlarmProvPeerRemoteDatabaseSyncInProgressEnable
True - alarm is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.67.1.1.4.1.1.5
adTa5kRedundancyAlarmProvManualSwitchEnable
True - alarm is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.67.1.1.4.1.1.6
adTa5kRedundancyAlarmProvSwitchToProtectEnable
True - alarm is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.67.1.1.4.1.1.7
adTa5kRedundancyAlarmProvAutomaticSwitchEnable
True - alarm is enabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.67.1.1.4.1.1.8