ADTRAN-SHDSL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
189

adEShdslIndexTable

table
.1.3.6.1.4.1.664.5.59.1.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslIndexTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslIndexTable' 
This table declares the indeces to be used throughout the ADTRAN-SHDSL-MIB.
adEShdslIndexEntry row .1.3.6.1.4.1.664.5.59.1.1.1.1
An entry in the adEShdslIndexTable.
Indexes
Column Syntax OID
adEShdslInvIndex
Each entry in this table corresponds to a physical element
in a SHDSL Span. It is based on the EOC unit addressing
scheme with reference to the xtuC.
AdEShdslUnitId
Type Values:
1ltu
2ntu
3xru1
4xru2
5xru3
6xru4
7xru5
8xru6
9xru7
10xru8
 .1.3.6.1.4.1.664.5.59.1.1.1.1.1
adEShdslSideIndex
This is the referenced side of a SHDSL unit - Network
or Customer side. The side facing the Network is the Network
side, while the side facing the Customer is the Customer side.
AdEShdslUnitSide
Type Values:
1networkSide
2customerSide
 .1.3.6.1.4.1.664.5.59.1.1.1.1.2
adEShdslWirePairIndex
This is the referenced pair of wires in a SHDSL Segment.
AdEShdslWirePair
Type Values:
1wirePair1
2wirePair2
 .1.3.6.1.4.1.664.5.59.1.1.1.1.3

adEShdslInventoryTable

table
.1.3.6.1.4.1.664.5.59.1.2.1 · 1 row entry · 17 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslInventoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslInventoryTable' 
This table supports retrieval of unit inventory information
available via the EOC from units in a SHDSL line.
          
Entries in this table are dynamically created during the
line discovery process.  The life cycle for these entries
is as follows:
          
   - stu discovers a device, either a far-end stu or an sru
   - an inventory table entry is created for the device
   - the line goes down for whatever reason
   - inventory table entries for unreachable devices are
     destroyed.
          
As these entries are created/destroyed dynamically, they
are NOT persistent.
adEShdslInventoryEntry row .1.3.6.1.4.1.664.5.59.1.2.1.1
An entry in the adEShdslInventoryTable. Each entry
represents inventory information for a single unit in a
SHDSL line. It is indexed by the ifIndex of the
SHDSL line and the adEShdslUnitId of the
associated unit.
Indexes
Column Syntax OID
adEShdslInvVendorID
Vendor ID as reported in an Inventory Response message.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.664.5.59.1.2.1.1.1
adEShdslInvVendorModelNumber
Vendor model number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.664.5.59.1.2.1.1.2
adEShdslInvVendorSerialNumber
Vendor serial number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 25-25
 .1.3.6.1.4.1.664.5.59.1.2.1.1.3
adEShdslInvStandardVersion
Version of the SHDSL standard implemented, as reported
in an Inventory Response message.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.2.1.1.4
adEShdslInvVendorListNumber
Vendor list number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.664.5.59.1.2.1.1.5
adEShdslInvVendorIssueNumber
Vendor issue number as reported in an Inventory Response
message.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.664.5.59.1.2.1.1.6
adEShdslInvVendorSoftwareVersion
Vendor software version as reported in an Inventory Response
message.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.664.5.59.1.2.1.1.7
adEShdslInvEquipmentCode
Equipment code conforming to ANSI T1.213, Coded Identification
of Equipment Entities.
OctetString
Constraints:
range: 10-10
 .1.3.6.1.4.1.664.5.59.1.2.1.1.8
adEShdslInvVendorOther
Other vendor information as reported in an Inventory Response
message.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.664.5.59.1.2.1.1.9
adEShdslInvVendorEOCSoftwareVersion
Vendor EOC version as reported in a Discovery Response
message.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.2.1.1.10
adEShdslInvMfrDate
Optional Date of manufacture. Some products support.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.2.1.1.11
adEShdslInvCircuitID
Optional Circuit ID assigned to all elements in the xdsl circuit.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.2.1.1.12
adEShdslInvScratchPad
Optional Scratch Pad. 50 bytes long.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.2.1.1.13
adEShdslInvDspHwVersion
Returns the hardware version of the DSP
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.2.1.1.14
adEShdslInvDspFwVersion
Returns the firmware version of the DSP
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.2.1.1.15
adEShdslInvElementPresent
Returns true(1) if the element specified by adEShdslInvIndex is
present in the circuit. Returns false(2) otherwise
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.59.1.2.1.1.16
adEShdslInvPhysicalLinkId
Returns the physical link number associated with the element
specified by adEShdslInvIndex. For example, a 2 port repeater
would return 1 or 2 while an 8 port NTU would return a value
between 1 and 8 depending on which…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.2.1.1.17

adEShdslProvTable

table
.1.3.6.1.4.1.664.5.59.1.3.1 · 1 row entry · 24 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslProvTable' 
This table supports definitions of the configuration
of SHDSL lines.
adEShdslProvEntry row .1.3.6.1.4.1.664.5.59.1.3.1.1
An entry in the adEShdslProvTable.
Indexes
Column Syntax OID
adEShdslProvWireInterfaceMode
This object configures the two-wire or optional four-wire
operation for SHDSL Lines.
Enumerationr/w
Enumerated Values:
1twoWire
2fourWire
 .1.3.6.1.4.1.664.5.59.1.3.1.1.1
adEShdslProvMinLineRate
This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(adEShdslSpanMaxLineRate), the line rate is considered
…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.2
adEShdslProvMaxLineRate
This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(adEShdslSpanMaxLineRate), the line rate is considered
…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.3
adEShdslProvG9912Annex
This object specifies the G991.2 Annex setting for the SHDSL
line.
Enumerationr/w
Enumerated Values:
1annexA
2annexB
3annexAorB
4efm
5annexAorEfm
6annexBorEfm
7annexAorBorEfm
 .1.3.6.1.4.1.664.5.59.1.3.1.1.4
adEShdslProvCurrCondTargetMargin
This object specifies the current condition target
SNR margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.5
adEShdslProvWorstCaseTargetMargin
This object specifies the worst case target
SNR margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.6
adEShdslProvUsedTargetMargins
Indicates which target SNR margin is enabled currently being used
in line probing. This has no meaning if line probing is disabled.
Enumeration
Enumerated Values:
1currCond
2worstCase
 .1.3.6.1.4.1.664.5.59.1.3.1.1.7
adEShdslProvClockMode
This object configures the clock reference for the STU-C
in a SHDSL Line.
Enumerationr/w
Enumerated Values:
1clockMode1
2clockMode2
3clockMode3a
4clockMode3b
 .1.3.6.1.4.1.664.5.59.1.3.1.1.8
adEShdslProvLineProbing
This object enables/disables support for Line Probe of
the units in a SHDSL line. When Line Probe is enabled, the
system performs Line Probing to find the best possible
rate.

A SET to disable(1) enables …
Enumerationr/w
Enumerated Values:
1disable
2enableCurrCond
3enableWorseCase
4enableANFP
5enableMaxRate
6enableT1417
7enableG9912
8enableG9912nl
9disableLineProbeEnableExtFixed
10enableANFPWorstCase
11enableANFPCurrentCond
 .1.3.6.1.4.1.664.5.59.1.3.1.1.9
adEShdslProvConstellation
This object sets the constellation size for each SHDSL
line. The selected constellation size is rate dependent.
16-TCPAM can only be used for rates ranging from 3 to 60
DS0's (192kbps to 3840kbps). 32-TCPAM can only b…
Enumerationr/w
Enumerated Values:
1tcpam16
2tcpam32
 .1.3.6.1.4.1.664.5.59.1.3.1.1.10
adEShdslProvPowerBackoff
This object sets the power backoff value for each SHDSL
line. If 255 is selected, the power backoff will automatically
be applied up to 6 dB. Valid values for forcing the backoff
are from 0 to 31dB.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.11
adEShdslProvName
This object sets a display name associated with the selected
SHDSL interface.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.3.1.1.12
adEShdslProvSpanPower
Span power. This is usually NOT applicable to a remote/NCTE unit.
Usually only applies for CO equipment (e.g. an access module).
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.664.5.59.1.3.1.1.13
adEShdslProvNIUloopback
NIU Loopback enable. May not be applicate for all units.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.664.5.59.1.3.1.1.14
adEShdslProvConstellationCrossoverRate
This object defines the rate (in bits per second) at which the number
of bits per symbol used automatically changes from 3 (16-TCPAM) to
4 (32-TCPAM). When the SHDSL line rate reaches this value, the \
constellation s…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.15
adEShdslProvAnfp100KhzLoss
This object specifies the customer measured loss at 100Khz on the respective
SHDSL line. When adEShdslProvLineProbing is set to enableANFP(4) this value
sets the maximum rate according to the ANFP spec
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.16
adEShdslProvAnfpTargetMargin
This object specifies the target SNR margin for a SHDSL line when the ANFP
rate mode has been selected. The SNR margin is the difference between the
desired SNR and the actual SNR. Target SNR margin is the desired SNR
m…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.17
adEShdslProvEmergencyFreeze
This object controls Emergency Freeze operation which provides enhanced
immunity to micro interruptions and short duration overvoltage conditions.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.664.5.59.1.3.1.1.18
adEShdslProvExtendedFixedRateAndConstellation
This object provisions the rate and constellation to be used in Extended Fixed mode.
The first octet contains the rate in 64kbps increments (Nx64k). The second octet contains
the constellation in bits/baud. One thing …
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.664.5.59.1.3.1.1.19
adEShdslProvExtendedFixedLastError
This object returns the last error encountered during a SET of adEShdslProvExtendedFixedRateAndConstellation.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.3.1.1.20
adEShdslProvAnfp100KhzLossLetter
When adEShdslProvLineProbing is set to enableANFPWorstCase(10)
or enableANFPCurrentCond(11) this object sets the maximum
rate according to the ANFP spec
U (Ultra Short, 100k loss<=11)
X (Extra Short, 100k loss<=21)
S…
Enumerationr/w
Enumerated Values:
1ultrashortU
2extrashortX
3shortS
4mediumM
5longL
 .1.3.6.1.4.1.664.5.59.1.3.1.1.21
adEShdslProvAnfpMaxLineRate
This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps) when
an ANFP training mode is enabled. The maximum train rate
of the line will be the minimum of the ANFP limi…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.22
adEShdslProvSCIAlarmThresh
This object configures the SCI alarm threshold for adEShdslSCIThreshCrossed in seconds.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.1.1.23
adEShdslProvSCIAlarmSeverity
Sets the severity for adEShdslSCIThreshCrossed.
Valid options listed below:
critical (0)
major (1)
minor (2)
alert (3)
info (4)
Enumerationr/w
Enumerated Values:
2info
3alert
4minor
5major
6critical
 .1.3.6.1.4.1.664.5.59.1.3.1.1.24

adEShdslAlarmProvTable

table
.1.3.6.1.4.1.664.5.59.1.3.2 · 1 row entry · 18 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslAlarmProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslAlarmProvTable' 
This table supports definitions of the alarm configuration
of SHDSL lines.
adEShdslAlarmProvEntry row .1.3.6.1.4.1.664.5.59.1.3.2.1
An entry in the adEShdslAlarmProvTable.
Indexes
Column Syntax OID
adEShdslAlarmProvLoopAttenThresh
This object configures the loop attenuation alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.1
adEShdslAlarmProvSNRMarginThresh
This object configures the SNR margin alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.2
adEShdslAlarmProvESThresh
This object configures the 15-Minute Errored Second alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.3
adEShdslAlarmProvSESThresh
This object configures the 15-Minute Severely Errored Second alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.4
adEShdslAlarmProvUASThresh
This object configures the 15-Minute Unavailable Second alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.5
adEShdslAlarmProvCVCThresh
This object configures the 15-Minute Code Violation Count alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.6
adEShdslAlarmProvLOSWSThresh
This object configures the 15-Minute Loss of Sync Word Second alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.7
adEShdslAlarmProvOSThresh
This object configures the 15-Minute Outage Second alarm threshold.
A value of 0 means the alarm is disabled.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.59.1.3.2.1.8
adEShdslAlarmProvES24HrThresh
This object configures the 24-Hour Errored Second alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.9
adEShdslAlarmProvSES24HrThresh
This object configures the 24-Hour Severely Errored Second alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.10
adEShdslAlarmProvUAS24HrThresh
This object configures the 24-Hour Unavailable Second alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.11
adEShdslAlarmProvCVC24HrThresh
This object configures the 24-Hour Code Violation Count alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.12
adEShdslAlarmProvLOSWS24HrThresh
This object configures the 24-Hour Loss of Sync Word Second alarm threshold.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.13
adEShdslAlarmProvOS24HrThresh
This object configures the 24-Hour Outage Second alarm threshold.
A value of 0 means the alarm is disabled.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.59.1.3.2.1.14
adEShdslAlarmProvRetrains15MinThresh
This object configures the 15 minute alarm threshold for the number
of times the specified interface transitions from handshaking to
training.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.15
adEShdslAlarmProvHandshakeFailures15MinThresh
This object configures the 15 minute alarm threshold for the number
of times a handshake session fails to converge on the specified interface
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.16
adEShdslAlarmProvRetrains24HrThresh
This object configures the 24 hour alarm threshold for the number
of times the specified interface transitions from handshaking to
training.
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.17
adEShdslAlarmProvHandshakeFailures24HrThresh
This object configures the 24 hour alarm threshold for the number
of times a handshake session fails to converge on the specified interface
A value of 0 means the alarm is disabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.2.1.18

adEShdslTestProvTable

table
.1.3.6.1.4.1.664.5.59.1.3.3 · 1 row entry · 2 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslTestProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslTestProvTable' 
This table supports definitions of the test configuration
of SHDSL lines.
adEShdslTestProvEntry row .1.3.6.1.4.1.664.5.59.1.3.3.1
An entry in the adEShdslTestProvTable.
Indexes
Column Syntax OID
adEShdslTestProvLoopbackTimeout
This object configures the loopback timeout. The
timeout is a 12-bit unsigned integer that represents
the number of minutes after which the loopback will be
removed. A value of 0 means there is no timeout and
any loopb…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.3.3.1.1
adEShdslTestProvEnumeratedLoopbackTimeout
This object configures the loopback timeout. The
timeout is selected from the enumerated list. Products that
support this method do not support adEShdslTestProvLoopbackTimeout.
Enumerationr/w
Enumerated Values:
1timeoutDisabled
2timeout20Minutes
3timeout60Minutes
4timeout120Minutes
5timeout8Hours
6timeout24Hours
 .1.3.6.1.4.1.664.5.59.1.3.3.1.2

adEShdslStatusTable

table
.1.3.6.1.4.1.664.5.59.1.4.1 · 1 row entry · 26 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslStatusTable' 
This table contains entries that report the current status of each point
along the SHDSL line.
adEShdslStatusEntry row .1.3.6.1.4.1.664.5.59.1.4.1.1
An entry in the adEShdslStatusTable.
Indexes
Column Syntax OID
adEShdslStatusCurrStatus
Indicates the current status of the requested SHDSL interface.
Enumeration
Enumerated Values:
1linkDown
2handshaking
3training
4linkUp
5alarmsPresent
6inTest
 .1.3.6.1.4.1.664.5.59.1.4.1.1.1
adEShdslStatusCurrLoopAtten
Indicates the current value of the loop attenuation at the requested
SHDSL interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.2
adEShdslStatusMinLoopAtten
Indicates the minimum value of the loop attenuation since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.3
adEShdslStatusMaxLoopAtten
Indicates the maximum value of the loop attenuation since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.4
adEShdslStatusCurrSNRMargin
Indicates the current value of the SNR margin at the requested
SHDSL interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.5
adEShdslStatusMinSNRMargin
Indicates the minimum value of the SNR margin since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.6
adEShdslStatusMaxSNRMargin
Indicates the maximum value of the SNR margin since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.7
adEShdslStatusES
Indicates the number of Errored Seconds since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.8
adEShdslStatusSES
Indicates the number of Severely Errored Seconds since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.9
adEShdslStatusUAS
Indicates the number of Unavailable Seconds since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.10
adEShdslStatusCVC
Indicates the number of Code Violations since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.11
adEShdslStatusLOSWS
Indicates the number of Loss of Sync Word Seconds since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.12
adEShdslStatusOS
Indicates the number of Outage Seconds since the last reset.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.13
adEShdslStatusResetStatistics
A SET causes the status information to be reset. A GET returns a 1.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.59.1.4.1.1.14
adEShdslStatusMaxAttainableRate
Indicates the maximum attainable line rate for this interface in bps.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.15
adEShdslStatusUpstreamPBO
Indicates the value of the power backoff (in dB) in the upstream direction.
(i.e. the closest SHDSL network interface to the endpoint selected.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.16
adEShdslStatusDownstreamPBO
Indicates the value of the power backoff (in dB) in the downstream direction.
(i.e. the closest SHDSL customer interface to the endpoint selected.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.17
adEShdslStatusCurrRate
This object returns the currently configured rate for
the associated SHDSL Line in bits-per-second (bps). This
represents the actual rate the line is trained at.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.18
adEShdslStatusRetrains
Indicates the number of times, since last reset, that
the specified interface has transitioned from handshaking
to training.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.19
adEShdslStatusHandshakeFailures
Indicates the number of times, since last reset, that
a handshake session failed to converge on the specified
interface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.20
adEShdslStatusCurrSNRMarginCurrTrain
Indicates the current value of the SNR margin at the requested
SHDSL interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.21
adEShdslStatusMinSNRMarginCurrTrain
Indicates the minimum value of the SNR margin observed since the
last retrain.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.22
adEShdslStatusMaxSNRMarginCurrTrain
Indicates the maximum value of the SNR margin observed since the
last retrain.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.23
adEShdslStatusMinSNRMarginPrevTrain
Indicates the minimum value of the SNR margin observed before the
last retrain.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.24
adEShdslStatusMaxSNRMarginPrevTrain
Indicates the maximum value of the SNR margin observed before the
last retrain.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.1.1.25
adEShdslStatusPhysicalLinkLabel
Returns the label used to physically identify the specified side of an element.
For example, SHDSL repeaters have an A side and a B side.
For elements without such a label, this will return an empty string.
OctetString
Constraints:
range: 0-1
 .1.3.6.1.4.1.664.5.59.1.4.1.1.26

adEShdslStatusInfoTable

table
.1.3.6.1.4.1.664.5.59.1.4.2 · 1 row entry · 4 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslStatusInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslStatusInfoTable' 
This table contains entries that report the current status of each point
along the SHDSL line.
adEShdslStatusInfoEntry row .1.3.6.1.4.1.664.5.59.1.4.2.1
An entry in the adEShdslStatusInfoTable.
Indexes
Column Syntax OID
adEShdslStatusInfoRepeaterNumber
Number of repeaters/regenerators detected on this interface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.4.2.1.1
adEShdslStatusInfoPairReversal
A stream of bytes representing the pair reversal status for
each span. The MSB is for span 1 (e.g. from the H4TUC to the
H4TUR/H4RU1), the next byte is for span 2 (e.g. from the H4RU1 to the
H4TUR/H4RU2), and next byte…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.664.5.59.1.4.2.1.2
adEShdslStatusInfoLoopAlarmStatus
A stream of byte codes identifying the current alarm status
of each DSL loop point.

For SHDSL:The bytes are in order from the MSB:
LTU L1, LTU L2, NTU L1, NTU L2, then (if necessary)
0 = No alarms, lo…
OctetString .1.3.6.1.4.1.664.5.59.1.4.2.1.3
adEShdslStatusInfoTopology
A stream of bytes used to represent the topology of a given circuit.
The format is show below:

Version 1
---------

Octet Description
----- --------…
OctetString .1.3.6.1.4.1.664.5.59.1.4.2.1.4

adEShdslStatusIfTable

table
.1.3.6.1.4.1.664.5.59.1.4.3 · 1 row entry · 1 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslStatusIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslStatusIfTable' 
This table contains entries that report the current status of each SHDSL interface.
adEShdslStatusIfEntry row .1.3.6.1.4.1.664.5.59.1.4.3.1
An entry in the adEShdslStatusIfTable.
Indexes
Column Syntax OID
adEShdslStatusIfTrainingMode
Indicates the mode of the SHDSL interface. Only valid for products that
support direct MIB access.
Enumeration
Enumerated Values:
1ltu
2ntu
 .1.3.6.1.4.1.664.5.59.1.4.3.1.1

adEShdslTestTable

table
.1.3.6.1.4.1.664.5.59.1.5.1 · 1 row entry · 3 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslTestTable' 
This table contains entries that allow the user to run tests at
different points along the SHDSL line.
adEShdslTestEntry row .1.3.6.1.4.1.664.5.59.1.5.1.1
An entry in the adEShdslTestTable.
Indexes
Column Syntax OID
adEShdslTestLoopback
Controls enabling/disabling loopbacks along each SHDSL interface
Enumerationr/w
Enumerated Values:
1dualSidedLoopback
2networkTransparentLoopback
3networkNonTransparentLoopback
4customerTransparentLoopback
5customerNonTransparentLoopback
6noLoopback
 .1.3.6.1.4.1.664.5.59.1.5.1.1.1
adEShdslTestLoopdownAll
This object is a command to loopdown all the interfaces in the
circuit when set. This applies to all interfaces currently looped
back. There is no significance on a get. A get always returns 1,
but does not imply any st…
Enumerationr/w
Enumerated Values:
1loopdownAllNow
 .1.3.6.1.4.1.664.5.59.1.5.1.1.2
adEShdslTestinitMinMax
Reset Min/Max characteristics of the Loops. Always returns 1 on get.
Enumerationr/w
Enumerated Values:
1resetMinMax
 .1.3.6.1.4.1.664.5.59.1.5.1.1.3

adEShdslTestRepeaterPoweringTable

table
.1.3.6.1.4.1.664.5.59.1.5.2 · 1 row entry · 11 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslTestRepeaterPoweringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslTestRepeaterPoweringTable' 
This table contains entries that allow the user control
the powering sequence of SHDSL repeaters.
adEShdslTestRepeaterPoweringEntry row .1.3.6.1.4.1.664.5.59.1.5.2.1
An entry in the adEShdslTestRepeaterPoweringTable.
Indexes
Column Syntax OID
adEShdslTestRepeaterPoweringState
Determines the method by which the repeaters provide power. The default mode is normal(1) where
the repeaters read their hardware dip switches to determine whether to send power on to the next
repeater. Setting the st…
Enumerationr/w
Enumerated Values:
1normal
2manual
 .1.3.6.1.4.1.664.5.59.1.5.2.1.1
adEShdslTestRepeaterPoweringNumRepeaters
The number of repeaters to power. Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.664.5.59.1.5.2.1.2
adEShdslTestRepeaterPoweringTimeout
The amount of time after which adEShdslTestRepeaterPoweringState will be set back to normal(1).
A value of 0 means there is no timeout and the state will not revert to normal(1) automatically.
Only valid if adEShdslTest…
minutesInteger32r/w
Constraints:
range: 0-99999
 .1.3.6.1.4.1.664.5.59.1.5.2.1.3
adEShdslTestRepeaterPoweringTimeRemaining
The amount of time remaining before adEShdslTestRepeaterPoweringState will be set back to normal(1).
Only valid if adEShdslTestRepeaterPoweringTimeout is non-zero and
adEShdslTestRepeaterPoweringState is set to manual(2…
minutesInteger32
Constraints:
range: 0-99999
 .1.3.6.1.4.1.664.5.59.1.5.2.1.4
adEShdslTestRepeaterPoweringSRU1Discovered
Returns true(1) if SRU1 is present. Returns false(2) otherwise.
Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.59.1.5.2.1.5
adEShdslTestRepeaterPoweringSRU2Discovered
Returns true(1) if SRU2 is present. Returns false(2) otherwise.
Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.59.1.5.2.1.6
adEShdslTestRepeaterPoweringSRU3Discovered
Returns true(1) if SRU3 is present. Returns false(2) otherwise.
Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.59.1.5.2.1.7
adEShdslTestRepeaterPoweringSRU4Discovered
Returns true(1) if SRU4 is present. Returns false(2) otherwise.
Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.59.1.5.2.1.8
adEShdslTestRepeaterPoweringShortDetected
Returns the location of a detected powering short. This will be the repeater
at the end of the powered span. Returns none(0) if no short has been detected.
Only valid if adEShdslTestRepeaterPoweringState is set to man…
Enumeration
Enumerated Values:
0none
1sru1
2sru2
3sru3
4sru4
 .1.3.6.1.4.1.664.5.59.1.5.2.1.9
adEShdslTestRepeaterPoweringGroundFaultDetected
Returns the location of a detected powering ground fault. This will be the repeater
at the end of the powered span. Returns none(0) if no short has been detected.
Only valid if adEShdslTestRepeaterPoweringState is set…
Enumeration
Enumerated Values:
0none
1sru1
2sru2
3sru3
4sru4
 .1.3.6.1.4.1.664.5.59.1.5.2.1.10
adEShdslTestRepeaterPoweringLastErrorString
Text string describing the last error encountered when attempting to SET one of the entries
in this table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.5.2.1.11

adEShdslTestLoopLocatorLastErrorTable

table
.1.3.6.1.4.1.664.5.59.1.5.3 · 1 row entry · 1 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslTestLoopLocatorLastErrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslTestLoopLocatorLastErrorTable' 
This table contains the last error message generated by operations on the entries in 
adEShdslTestLoopLocatorTable.
adEShdslTestLoopLocatorLastErrorEntry row .1.3.6.1.4.1.664.5.59.1.5.3.1
An entry in the adEShdslTestLoopLocatorLastErrorTable.
Indexes
Column Syntax OID
adEShdslTestLoopLocatorLastErrorString
Text string describing the last error encountered when attempting to SET one of the entries
in adEShdslTestLoopLocatorTable.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.5.3.1.1

adEShdslTestLoopLocatorTable

table
.1.3.6.1.4.1.664.5.59.1.5.4 · 1 row entry · 3 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslTestLoopLocatorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslTestLoopLocatorTable' 
This table contains entries that allows the user to inject modulated noise to identify
a particular loop with a handset.
adEShdslTestLoopLocatorEntry row .1.3.6.1.4.1.664.5.59.1.5.4.1
An entry in the adEShdslTestLoopLocatorTable.
Indexes
Column Syntax OID
adEShdslTestLoopLocatorState
Activates the loop locator test, injecting modulated noise onto the specified loop. The default
mode is disabled(1). This is primarily used to diagnose wiring issues.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.664.5.59.1.5.4.1.1
adEShdslTestLoopLocatorTimeout
The amount of time after which adEShdslTestLoopLocatorState will be set back to disabled(1).
A value of 0 means there is no timeout and the state will not revert to disabled(1) automatically.
Only valid if adEShdslTestL…
minutesInteger32r/w
Constraints:
range: 0-99999
 .1.3.6.1.4.1.664.5.59.1.5.4.1.2
adEShdslTestLoopLocatorTimeRemaining
The amount of time remaining before adEShdslTestLoopLocatorState will be set back to disabled(1).
Only valid if adEShdslTestLoopLocatorTimeout is non-zero and adEShdslTestLoopLocatorState is
set to enabled(2).
minutesInteger32
Constraints:
range: 0-99999
 .1.3.6.1.4.1.664.5.59.1.5.4.1.3

adEShdslPerfCurrTable

table
.1.3.6.1.4.1.664.5.59.1.6.1 · 1 row entry · 22 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslPerfCurrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslPerfCurrTable' 
This table contains entries that allow the user to retrieve
the current performance history values at different points
along the SHDSL line.
adEShdslPerfCurrEntry row .1.3.6.1.4.1.664.5.59.1.6.1.1
An entry in the adEShdslPerfCurrTable.
Indexes
Column Syntax OID
adEShdslPerfCurr15MinES
Indicates the number of Errored Seconds in the
current 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.1
adEShdslPerfCurr15MinSES
Indicates the number of Severely Errored Seconds in the
current 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.2
adEShdslPerfCurr15MinUAS
Indicates the number of Unavailable Seconds in the
current 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.3
adEShdslPerfCurr15MinCVC
Indicates the number of Code Violations in the
current 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.4
adEShdslPerfCurr15MinLOSWS
Indicates the number of Loss of Sync Word Seconds in the
current 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.5
adEShdslPerfCurr15MinOS
Indicates the number of Outage Seconds in the
current 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.6
adEShdslPerfCurr24HrES
Indicates the number of Errored Seconds in the
current 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.7
adEShdslPerfCurr24HrSES
Indicates the number of Severely Errored Seconds in the
current 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.8
adEShdslPerfCurr24HrUAS
Indicates the number of Unavailable Seconds in the
current 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.9
adEShdslPerfCurr24HrCVC
Indicates the number of Code Violations in the
current 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.10
adEShdslPerfCurr24HrLOSWS
Indicates the number of Loss of Sync Word Seconds in the
current 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.11
adEShdslPerfCurr24HrOS
Indicates the number of Outage Seconds in the
current 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.12
adEShdslPerf15MinValidIntervals
The number of valid 15-Minute intervals.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.13
adEShdslPerf24HrValidIntervals
The number of valid 24-Hour intervals.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.14
adEShdslPerfCurr15MinRetrains
Indicates the number of times in the current 15 minute interval that
the specified interface has transitioned from handshaking
to training.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.15
adEShdslPerfCurr15MinHandshakeFailures
Indicates the number of times in the current 15 minute interval that
a handshake session failed to converge on the specified
interface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.16
adEShdslPerfCurr24HrRetrains
Indicates the number of times in the current 24 hour interval that
the specified interface has transitioned from handshaking
to training.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.17
adEShdslPerfCurr24HrHandshakeFailures
Indicates the number of times in the current 24 hour interval that
a handshake session failed to converge on the specified
interface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.18
adEShdslPerfCurr15MinMinSNRMargin
Indicates the minimum SNR margin observed in the current 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.19
adEShdslPerfCurr15MinMaxSNRMargin
Indicates the maximum SNR margin observed in the current 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.20
adEShdslPerfCurr24HrMinSNRMargin
Indicates the minimum SNR margin observed in the current 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.21
adEShdslPerfCurr24HrMaxSNRMargin
Indicates the maximum SNR margin observed in the current 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.1.1.22

adEShdslPerfPriorTable

table
.1.3.6.1.4.1.664.5.59.1.6.2 · 1 row entry · 12 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslPerfPriorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslPerfPriorTable' 
This table contains entries that allow the user to retrieve
the prior performance history values at different points
along the SHDSL line.
adEShdslPerfPriorEntry row .1.3.6.1.4.1.664.5.59.1.6.2.1
An entry in the adEShdslPerfPriorTable.
Indexes
Column Syntax OID
adEShdslPerfPrior15MinES
Indicates the number of Errored Seconds in the
prior 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.1
adEShdslPerfPrior15MinSES
Indicates the number of Severely Errored Seconds in the
prior 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.2
adEShdslPerfPrior15MinUAS
Indicates the number of Unavailable Seconds in the
prior 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.3
adEShdslPerfPrior15MinCVC
Indicates the number of Code Violations in the
prior 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.4
adEShdslPerfPrior15MinLOSWS
Indicates the number of Loss of Sync Word Seconds in the
prior 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.5
adEShdslPerfPrior15MinOS
Indicates the number of Outage Seconds in the
prior 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.6
adEShdslPerfPrior24HrES
Indicates the number of Errored Seconds in the
prior 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.7
adEShdslPerfPrior24HrSES
Indicates the number of Severely Errored Seconds in the
prior 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.8
adEShdslPerfPrior24HrUAS
Indicates the number of Unavailable Seconds in the
prior 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.9
adEShdslPerfPrior24HrCVC
Indicates the number of Code Violations in the
prior 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.10
adEShdslPerfPrior24HrLOSWS
Indicates the number of Loss of Sync Word Seconds in the
prior 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.11
adEShdslPerfPrior24HrOS
Indicates the number of Outage Seconds in the
prior 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.2.1.12

adEShdslPerfResetTable

table
.1.3.6.1.4.1.664.5.59.1.6.3 · 1 row entry · 1 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslPerfResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslPerfResetTable' 
This table contains entries that allow the user to reset
the performance history values at different points
along the SHDSL line.
adEShdslPerfResetEntry row .1.3.6.1.4.1.664.5.59.1.6.3.1
An entry in the adEShdslPerfResetTable.
Indexes
Column Syntax OID
adEShdslPerfReset
Resets the performance history values on the selected interface.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.59.1.6.3.1.1

adEShdslPerf15MinIntTable

table
.1.3.6.1.4.1.664.5.59.1.6.4 · 1 row entry · 11 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslPerf15MinIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslPerf15MinIntTable' 
This table contains entries that allow the user to retrieve
the 15 minute performance history values at different points
along the SHDSL line.
adEShdslPerf15MinIntEntry row .1.3.6.1.4.1.664.5.59.1.6.4.1
An entry in the adEShdslPerf15MinIntTable.
Indexes
Column Syntax OID
adEShdslPerf15MinIntNumber
15-minute performance interval. Interval 1 represents the most recent
previous interval. Interval 96 represents 24 hours ago. Intervals 2
through 96 are optional.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.1
adEShdslPerf15MinIntES
Indicates the number of Errored Seconds in the
selected 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.2
adEShdslPerf15MinIntSES
Indicates the number of Severely Errored Seconds in the
selected 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.3
adEShdslPerf15MinIntUAS
Indicates the number of Unavailable Seconds in the
selected 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.4
adEShdslPerf15MinIntCVC
Indicates the number of Code Violations in the
selected 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.5
adEShdslPerf15MinIntLOSWS
Indicates the number of Loss of Sync Word Seconds in the
selected 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.6
adEShdslPerf15MinIntOS
Indicates the number of Outage Seconds in the
selected 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.7
adEShdslPerf15MinIntRetrains
Indicates the number of times in the selected 15 minute interval that
the specified interface has transitioned from handshaking
to training.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.8
adEShdslPerf15MinIntHandshakeFailures
Indicates the number of times in the selected 15 minute interval that
a handshake session failed to converge on the specified
interface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.9
adEShdslPerf15MinIntMinSNRMargin
Indicates the minimum SNR margin observed in the specified 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.10
adEShdslPerf15MinIntMaxSNRMargin
Indicates the maximum SNR margin observed in the specified 15 minute interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.4.1.11

adEShdslPerf24HrIntTable

table
.1.3.6.1.4.1.664.5.59.1.6.5 · 1 row entry · 11 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslPerf24HrIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslPerf24HrIntTable' 
This table contains entries that allow the user to retrieve
the 24 hour performance history values at different points
along the SHDSL line.
adEShdslPerf24HrIntEntry row .1.3.6.1.4.1.664.5.59.1.6.5.1
An entry in the adEShdslPerf24HrIntTable.
Indexes
Column Syntax OID
adEShdslPerf24HrIntNumber
24-hour performance interval. Interval 1 represents the most recent
previous interval. Interval 7 represents 7 days ago. Intervals 2
through 7 are optional. Also, intervals 8 through 30 are optional.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.1
adEShdslPerf24HrIntES
Indicates the number of Errored Seconds in the
selected 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.2
adEShdslPerf24HrIntSES
Indicates the number of Severely Errored Seconds in the
selected 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.3
adEShdslPerf24HrIntUAS
Indicates the number of Unavailable Seconds in the
selected 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.4
adEShdslPerf24HrIntCVC
Indicates the number of Code Violations in the
selected 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.5
adEShdslPerf24HrIntLOSWS
Indicates the number of Loss of Sync Word Seconds in the
selected 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.6
adEShdslPerf24HrIntOS
Indicates the number of Outage Seconds in the
selected 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.7
adEShdslPerf24HrIntRetrains
Indicates the number of times in the selected 24 hour interval that
the specified interface has transitioned from handshaking
to training.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.8
adEShdslPerf24HrIntHandshakeFailures
Indicates the number of times in the selected 24 hour interval that
a handshake session failed to converge on the specified
interface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.9
adEShdslPerf24HrIntMinSNRMargin
Indicates the minimum SNR margin observed in the specified 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.10
adEShdslPerf24HrIntMaxSNRMargin
Indicates the maximum SNR margin observed in the specified 24 hour interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.6.5.1.11

adEShdslPerfPortResetTable

table
.1.3.6.1.4.1.664.5.59.1.6.6 · 1 row entry · 1 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslPerfPortResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslPerfPortResetTable' 
This table contains entries that allow the user to reset
the performance history values for each SHDSL port.
adEShdslPerfPortResetEntry row .1.3.6.1.4.1.664.5.59.1.6.6.1
An entry in the adEShdslPerfPortResetTable.
Indexes
Column Syntax OID
adEShdslPerfPortReset
Resets the performance history values for all interfaces connected to
the selected port.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.59.1.6.6.1.1

adEShdslSpliceDetectionTable

table
.1.3.6.1.4.1.664.5.59.1.7.1 · 1 row entry · 7 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslSpliceDetectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslSpliceDetectionTable' 
This table contains entries that allow the user to retrieve
the splice detection data.
adEShdslSpliceDetectionEntry row .1.3.6.1.4.1.664.5.59.1.7.1.1
An entry in the adEShdslSpliceDetectionTable.
Indexes
Column Syntax OID
adEShdslSpliceDetectionSummary
The splice detection summary for this endpoint.
A series of items in the following format: STR0.STR1.STR2 ... STR14
representing the daily splice detection summary. The first item (STR1)
represents the current day, th…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.1.1.1
adEShdslSpliceCounts
A series of numbers (0-99) in the following format: N0.N1.N3 ... N17
These values represent the splice detection histogram values for the
corresponding distance values from adEShdslSpliceDistances. Note that
some rate…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.1.1.2
adEShdslSpliceDistances
A series of distances in the following format: D0.D1.D3 ... D17
These values represent the distances corresponding to each bucket
in the splice detection histogram. Note that some rates may not
support 18 distances
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.1.1.3
adEShdslSpliceRestart
Restarts the splice detection on the selected interface. This
will cause all 24 hour counts for this interface to be cleared.
Enumerationr/w
Enumerated Values:
1restart
 .1.3.6.1.4.1.664.5.59.1.7.1.1.4
adEShdslSpliceDistanceType
Sets the unit of measurement used when returning the values for
adEShdslSpliceDistances. This value is set globally for the unit
and will return the same value for all interfaces on the unit.
Enumerationr/w
Enumerated Values:
1meters
2feet
 .1.3.6.1.4.1.664.5.59.1.7.1.1.5
adEShdslSpliceRate
A last trained rate during the current interval. The value returned is the
rate in 64kbps increments (N x 64k).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.7.1.1.6
adEShdslSpliceBadSpliceDetected
Returns true if a bad splice has been detected on the specified interface. Returns false otherwise.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.664.5.59.1.7.1.1.7

adEShdslSpliceDet24HrIntTable

table
.1.3.6.1.4.1.664.5.59.1.7.2 · 1 row entry · 4 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslSpliceDet24HrIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslSpliceDet24HrIntTable' 
This table contains entries that allow the user to retrieve
24 hour splice detection historical interval data.
adEShdslSpliceDet24HrIntEntry row .1.3.6.1.4.1.664.5.59.1.7.2.1
An entry in the adEShdslSpliceDet24HrIntTable.
Indexes
Column Syntax OID
adEShdslSpliceDet24HrIntNumber
24-hour splice detect interval. Interval 1 represents the most recent
previous interval. Interval 7 represents 7 days ago. Intervals 2
through 7 are optional.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.7.2.1.1
adEShdslSplice24HrIntCounts
A series of numbers (0-99) in the following format: N0.N1.N3 ... N17
These values represent the splice detection histogram values for the
corresponding distance values from adEShdslSpliceDistances for the selected
inte…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.2.1.2
adEShdslSplice24HrIntDistances
A series of distances in the following format: D0.D1.D3 ... D17
These values represent the distances corresponding to each bucket in the splice detection
histogram for the selected interval. Note that some rates may no…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.2.1.3
adEShdslSplice24HrIntRate
A last trained rate during the specified interval. The value returned is the
rate in 64kbps increments (N x 64k).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.7.2.1.4

adEShdslSpliceDet15MinCurrTable

table
.1.3.6.1.4.1.664.5.59.1.7.3 · 1 row entry · 3 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslSpliceDet15MinCurrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslSpliceDet15MinCurrTable' 
This table contains entries that allow the user to retrieve
15 minute splice detection current interval data.
adEShdslSpliceDet15MinCurrEntry row .1.3.6.1.4.1.664.5.59.1.7.3.1
An entry in the adEShdslSpliceDet15MinCurrTable.
Indexes
Column Syntax OID
adEShdslSplice15MinCurrCounts
A series of numbers (0-99) in the following format: N0.N1.N3 ... N17
These values represent the splice detection histogram values for the
corresponding distance values from adEShdslSpliceDistances for the selected
inte…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.3.1.1
adEShdslSplice15MinCurrDistances
A series of distances in the following format: D0.D1.D3 ... D17
These values represent the distances corresponding to each bucket in the splice detection
histogram for the current interval. Note that some rates may not…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.3.1.2
adEShdslSplice15MinCurrRate
A last trained rate during the current interval. The value returned is the
rate in 64kbps increments (N x 64k).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.7.3.1.3

adEShdslSpliceDet15MinIntTable

table
.1.3.6.1.4.1.664.5.59.1.7.4 · 1 row entry · 4 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adEShdslSpliceDet15MinIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-SHDSL-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-SHDSL-MIB::adEShdslSpliceDet15MinIntTable' 
This table contains entries that allow the user to retrieve
15 minute splice detection historical interval data.
adEShdslSpliceDet15MinIntEntry row .1.3.6.1.4.1.664.5.59.1.7.4.1
An entry in the adEShdslSpliceDet15MinIntTable.
Indexes
Column Syntax OID
adEShdslSpliceDet15MinIntNumber
15 minute splice detect interval. Interval 1 represents the most recent
previous interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.7.4.1.1
adEShdslSplice15MinIntCounts
A series of numbers (0-99) in the following format: N0.N1.N3 ... N17
These values represent the splice detection histogram values for the
corresponding distance values from adEShdslSpliceDistances for the selected
inte…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.4.1.2
adEShdslSplice15MinIntDistances
A series of distances in the following format: D0.D1.D3 ... D17
These values represent the distances corresponding to each bucket in the splice detection
histogram for the selected interval. Note that some rates may no…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.59.1.7.4.1.3
adEShdslSplice15MinIntRate
A last trained rate during the specified interval. The value returned is the
rate in 64kbps increments (N x 64k).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.1.7.4.1.4