ADTRAN-PLUGGABLE-PORT-MIB Table View

Provides information about pluggable ports/interfaces,
such as SFPs and XFPs.

adGenPluggablePortEntry row .1.3.6.1.4.1.664.5.70.4.1.1.1

Provides information about pluggable ports/interfaces.
that are plugged into the system.

Indexes

adGenPluggablePortIndex

Column	Syntax	OID
adGenPluggablePortIndex Identifies the interface index of the pluggable port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.4.1.1.1.1
adGenPluggablePortPluggableType Reports the form factor of the pluggable port.	Enumeration Enumerated Values: 1 none 2 sfp 3 xfp 4 unknown 5 qsfp	.1.3.6.1.4.1.664.5.70.4.1.1.1.2
adGenPluggablePortConnectorType Reports the type of the pluggable port.	Enumeration Enumerated Values: 1 other 2 fiberLC 3 fiberSC 4 mtrj 5 hssdc 6 copperRJ45 7 none 8 copperPigtail 9 opticalPigtail 10 mpo 11 noSeparable	.1.3.6.1.4.1.664.5.70.4.1.1.1.3
adGenPluggablePortCapabilities Reports the capabilities of the pluggable port; whether the port is pluggable (0) (if not pluggable, the port might still be able to report optical data), or if the bit error rate is readable (1). Also reports if the vo…	Bits Enumerated Values: 0 pluggable 1 berReadable 2 voltageReadable 3 wavelengthReadable 4 diagnosticsAvailable 5 wavelengthProvisionable	.1.3.6.1.4.1.664.5.70.4.1.1.1.4
adGenPluggablePortState Reports the state of the pluggable port; multiple bits can be set for various details of 'portDown'. If the port is 'portUp', there shouldn't be any other bits set. portDown: Port is non-operational, for …	Bits Enumerated Values: 0 portUnsupported 1 portUp 2 portDown 3 portLos 4 portLol 5 portSignalDegrade 6 portSignalFail 7 portMissing 8 cardMissing	.1.3.6.1.4.1.664.5.70.4.1.1.1.5
adGenPluggablePortStatusBits Reports other status information for the pluggable port. isSupported: Pluggable is an ADTRAN part. isPresent: Pluggable has been detected. isValid: Pluggable information has been read correctly. isMismatched: Pluggable …	Bits Enumerated Values: 0 isPresent 1 isValid 2 isSupported 3 isMismatched 4 isTxEnabled 5 isTxFault 6 isWavelengthMismatch	.1.3.6.1.4.1.664.5.70.4.1.1.1.6
adGenPluggablePortAlarmBits Reports the alarm status of the pluggable port, matching each bit to a supported alarm on the pluggable. This may be set, even if the related bit in adGenPluggablePortAlarmsSuppressed is set to block the alarm being rai…	Bits Enumerated Values: 0 txFault 1 missing 2 unsupported 3 speedMismatch 4 highTemp 5 wavelengthMismatch	.1.3.6.1.4.1.664.5.70.4.1.1.1.7
adGenPluggablePortAlarmsSuppressed Allows the alarm to be suppressed; if the bit is set, the alarm will not be raised, even if the condition is met.	Bitsr/w Enumerated Values: 0 txFault 1 missing 2 unsupported 3 speedMismatch 4 highTemp 5 wavelengthMismacth	.1.3.6.1.4.1.664.5.70.4.1.1.1.8
adGenPluggablePortBer Reports the exponent of the Bit Error Rate reading on the port; resulting BER should be 1E-N, where N is the reported value. This is valid only if the berReadable bit is set in adGenPluggablePortCapabilities.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.4.1.1.1.9
adGenPluggablePortVendorName Reports the pluggable port's vendor name as read from the pluggable PROM.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.664.5.70.4.1.1.1.10
adGenPluggablePortVendorPartNumber Reports the pluggable port's vendor part number as read from the pluggable PROM.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.664.5.70.4.1.1.1.11
adGenPluggablePortVendorSerialNumber Reports the pluggable port's vendor serial number as read from the pluggable PROM.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.664.5.70.4.1.1.1.12
adGenPluggablePortAdtranName Reports the pluggable port's Adtran name as read from the pluggable PROM (if isApproved).	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.664.5.70.4.1.1.1.13
adGenPluggablePortAdtranPartNumber Reports the pluggable port's Adtran part number as read from the pluggable PROM (if isApproved).	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.664.5.70.4.1.1.1.14
adGenPluggablePortAdtranClei Reports the pluggable port's Adtran CLEI as read from the pluggable PROM (if isApproved).	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.664.5.70.4.1.1.1.15
adGenPluggablePortWavelength Reports the wavelength of the pluggable port in nanometers, only if the adGenPluggablePortCapabilities has the wavelengthReadable bit set.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.4.1.1.1.16
adGenPluggablePortMinBitRate Reports the minimum rate of the pluggable port in Mb/s.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.4.1.1.1.17
adGenPluggablePortMaxBitRate Reports the maximum rate of the pluggable port in Mb/s.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.4.1.1.1.18
adGenPluggablePortReachLength Reports the maximum transmission length of the pluggable port in units reported by adGenPluggablePortReachUnits.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.4.1.1.1.19
adGenPluggablePortReachUnits Reports the units of adGenPluggablePortReachLength.	Enumeration Enumerated Values: 1 reachUnit1Kmfor09um 2 reachUnit100mfor09um 3 reachUnit10mfor50um 4 reachUnit10mfor62um 5 reachUnit1mforCu 6 reachUnit1KmforSmf 7 reachUnit2mforEBW 8 reachUnit1mfor50um 9 reachUnit1mfor62um	.1.3.6.1.4.1.664.5.70.4.1.1.1.20
adGenPluggablePortRxPowerdeprecated Reports the receive power of the pluggable port in units reported by adGenPluggablePortRxPowerUnits. This object is deprecated for new development. Please use the relevant OID in the adGenPluggablePortChannelTable for n…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.1.1.21
adGenPluggablePortRxPowerUnitsdeprecated Reports the units of adGenPluggablePortRxPower. This object is deprecated for new development. Please use the relevant OID in the adGenPluggablePortChannelTable for new development.	PluggablePortPowerUnits Type Values: 1 dBm 2 tenthsDBm 3 microWatts 4 tenthsMicroWatts	.1.3.6.1.4.1.664.5.70.4.1.1.1.22
adGenPluggablePortTxPowerdeprecated Reports the transmit power of the pluggable port in units reported by adGenPluggablePortTxPowerUnits. This object is deprecated for new development. Please use the relevant OID in the adGenPluggablePortChannelTable for …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.1.1.23
adGenPluggablePortTxPowerUnitsdeprecated Reports the units of adGenPluggablePortTxPower. This object is deprecated for new development. Please use the relevant OID in the adGenPluggablePortChannelTable for new development.	PluggablePortPowerUnits Type Values: 1 dBm 2 tenthsDBm 3 microWatts 4 tenthsMicroWatts	.1.3.6.1.4.1.664.5.70.4.1.1.1.24
adGenPluggablePortTxBiasdeprecated Reports the transmit bias current of the pluggable port in units reported by adGenPluggablePortTxBiasUnits. This object is deprecated for new development. Please use the relevant OID in the adGenPluggablePortChannelTabl…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.1.1.25
adGenPluggablePortTxBiasUnitsdeprecated Reports the units of adGenPluggablePortTxBias. This object is deprecated for new development. Please use the relevant OID in the adGenPluggablePortChannelTable for new development.	Enumeration Enumerated Values: 1 milliAmps	.1.3.6.1.4.1.664.5.70.4.1.1.1.26
adGenPluggablePortTemperature Reports the temperature of the pluggable port in units reported by adGenPluggablePortTemperatureUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.1.1.27
adGenPluggablePortTemperatureUnits Reports the units of adGenPluggablePortTemperature.	Enumeration Enumerated Values: 1 celsius 2 tenthsCelsius 3 fahrenheit 4 tenthsFahrenheit	.1.3.6.1.4.1.664.5.70.4.1.1.1.28
adGenPluggablePortVoltage Reports the voltage of the pluggable port in mV, only if adGenPluggablePortCapabilities has the voltageReadable bit set.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.1.1.29
adGenPluggablePortVendorRevision Reports the pluggable port's vendor revision level as read from the pluggable PROM.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.664.5.70.4.1.1.1.30
adGenPluggablePortWavelengthPicoMeter Reports the wavelength of the pluggable port in picometer, only if the adGenPluggablePortCapabilities has the wavelengthReadable bit set.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.4.1.1.1.31
adGenPluggableNumberOfXcvrChannels Reports the number of channels that this pluggable module supports. Example: for SFPs this should be 1, for QSFP this will typically be 4. Can be used to determine the max indices supported by tables indexed by ChannelI…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.1.1.32

Provides information about pluggable port channels
for Pluggable modules that have more than one communication
channel per module, such as QSFP.

adGenPluggablePortChannelEntry row .1.3.6.1.4.1.664.5.70.4.1.2.1

Provides information about pluggable port transceiver channels
for Pluggable modules that have more than one transceiver
channel per module, such as QSFP.

Indexes

adGenPluggablePortIndex adGenPluggablePortChannelXcvrIndex

Column	Syntax	OID
adGenPluggablePortChannelModuleIndex Identifies the interface index of the pluggable port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.4.1.2.1.1
adGenPluggablePortChannelXcvrIndex Identifies the transceiver channel of the pluggable port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.4.1.2.1.2
adGenPluggablePortChannelRxPower Reports the receive power of the pluggable port in units reported by adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.2.1.3
adGenPluggablePortChannelRxPowerUnits Reports the units of adGenPluggablePortRxPower.	PluggablePortPowerUnits Type Values: 1 dBm 2 tenthsDBm 3 microWatts 4 tenthsMicroWatts	.1.3.6.1.4.1.664.5.70.4.1.2.1.4
adGenPluggablePortChannelTxPower Reports the transmit power of the pluggable port in units reported by adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.2.1.5
adGenPluggablePortChannelTxPowerUnits Reports the units of adGenPluggablePortTxPower.	PluggablePortPowerUnits Type Values: 1 dBm 2 tenthsDBm 3 microWatts 4 tenthsMicroWatts	.1.3.6.1.4.1.664.5.70.4.1.2.1.6
adGenPluggablePortChannelTxBias Reports the transmit bias current of the pluggable port in units reported by adGenPluggablePortTxBiasUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.1.2.1.7
adGenPluggablePortChannelTxBiasUnits Reports the units of adGenPluggablePortTxBias.	Enumeration Enumerated Values: 1 milliAmps	.1.3.6.1.4.1.664.5.70.4.1.2.1.8

Provides cumulative statistics for pluggable ports.

adGenPluggablePortTotalStatsEntry row .1.3.6.1.4.1.664.5.70.4.2.1.1

Provides cumulative statistics for pluggable ports.

Indexes

adGenPluggablePortTotalStatsIndex

Column	Syntax	OID
adGenPluggablePortTotalStatsIndex Identifies the interface index of the pluggable port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.4.2.1.1.1
adGenPluggablePortTotalStatsMaxRxPower Reports the overall maximum Rx Power seen on this pluggable port, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.1.1.2
adGenPluggablePortTotalStatsMinRxPower Reports the overall minimum Rx Power seen on this pluggable port, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.1.1.3
adGenPluggablePortTotalStatsAvgRxPower Reports the overall average Rx Power seen on this pluggable port, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.1.1.4
adGenPluggablePortTotalStatsMaxTxPower Reports the overall maximum Tx Power seen on this pluggable port, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.1.1.5
adGenPluggablePortTotalStatsMinTxPower Reports the overall minimum Tx Power seen on this pluggable port, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.1.1.6
adGenPluggablePortTotalStatsAvgTxPower Reports the overall average Tx Power seen on this pluggable port, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.1.1.7

Provides statistics from the current interval
for pluggable ports.

adGenPluggablePortCurrentStatsEntry row .1.3.6.1.4.1.664.5.70.4.2.2.1

Provides statistics from the current interval
for pluggable ports.

Indexes

adGenPluggablePortCurrentStatsIndex

Column	Syntax	OID
adGenPluggablePortCurrentStatsIndex Identifies the interface index of the pluggable port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.4.2.2.1.1
adGenPluggablePortCurrentStatsMaxRxPower Reports the maximum Rx Power seen on this pluggable port in the current interval, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.2.1.2
adGenPluggablePortCurrentStatsMinRxPower Reports the minimum Rx Power seen on this pluggable port, in the current interval, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.2.1.3
adGenPluggablePortCurrentStatsAvgRxPower Reports the average Rx Power seen on this pluggable port, in the current interval, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.2.1.4
adGenPluggablePortCurrentStatsMaxTxPower Reports the maximum Tx Power seen on this pluggable port, in the current interval, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.2.1.5
adGenPluggablePortCurrentStatsMinTxPower Reports the minimum Tx Power seen on this pluggable port, in the current interval, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.2.1.6
adGenPluggablePortCurrentStatsAvgTxPower Reports the average Tx Power seen on this pluggable port, in the current interval, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.2.1.7

Provides 24 hour statistics for pluggable ports.

adGenPluggablePortDayStatsEntry row .1.3.6.1.4.1.664.5.70.4.2.3.1

Provides 24 hour statistics for pluggable ports.

Indexes

adGenPluggablePortDayStatsIndex

Column	Syntax	OID
adGenPluggablePortDayStatsIndex Identifies the interface index of the pluggable port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.4.2.3.1.1
adGenPluggablePortDayStatsMaxRxPower Reports the 24 hour maximum Rx Power seen on this pluggable port, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.3.1.2
adGenPluggablePortDayStatsMinRxPower Reports the 24 hour minimum Rx Power seen on this pluggable port, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.3.1.3
adGenPluggablePortDayStatsAvgRxPower Reports the 24 hour average Rx Power seen on this pluggable port, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.3.1.4
adGenPluggablePortDayStatsMaxTxPower Reports the 24 hour maximum Tx Power seen on this pluggable port, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.3.1.5
adGenPluggablePortDayStatsMinTxPower Reports the 24 hour minimum Tx Power seen on this pluggable port, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.3.1.6
adGenPluggablePortDayStatsAvgTxPower Reports the 24 hour average Tx Power seen on this pluggable port, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.3.1.7

Provides cumulative statistics for pluggable ports.

adGenPluggablePortIntervalStatsEntry row .1.3.6.1.4.1.664.5.70.4.2.4.1

Provides cumulative statistics for pluggable ports.

Indexes

adGenPluggablePortIntervalStatsIndex adGenPluggablePortIntervalStatsInterval

Column	Syntax	OID
adGenPluggablePortIntervalStatsIndex Identifies the interface index of the pluggable port.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.664.5.70.4.2.4.1.1
adGenPluggablePortIntervalStatsInterval Identifies the interval for which these stats are valid.	Unsigned32 Constraints: range: 1-96	.1.3.6.1.4.1.664.5.70.4.2.4.1.2
adGenPluggablePortIntervalStatsMaxRxPower Reports the maximum Rx Power seen on this pluggable port, in this interval, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.4.1.3
adGenPluggablePortIntervalStatsMinRxPower Reports the minimum Rx Power seen on this pluggable port, in this interval, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.4.1.4
adGenPluggablePortIntervalStatsAvgRxPower Reports the average Rx Power seen on this pluggable port, in this interval, in units of adGenPluggablePortRxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.4.1.5
adGenPluggablePortIntervalStatsMaxTxPower Reports the maximum Tx Power seen on this pluggable port, in this interval, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.4.1.6
adGenPluggablePortIntervalStatsMinTxPower Reports the minimum Tx Power seen on this pluggable port, in this interval, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.4.1.7
adGenPluggablePortIntervalStatsAvgTxPower Reports the average Tx Power seen on this pluggable port, in this interval, in units of adGenPluggablePortTxPowerUnits.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.2.4.1.8

The Pluggable Port provisioning table.

adGenPluggablePortProvEntry row .1.3.6.1.4.1.664.5.70.4.5.1.1

An entry in the Pluggable Port provisioning table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adGenPluggablePortProvWaveLength Used to specify a wavelength of light associated with pluggable module supported on this interface. A set value to 0 to auto detects and locks in the wavelength of the first pluggable module present when the interface r…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.5.1.1.1
adGenPluggablePortProvChannelNumber Used to specify a wavelength channel number of DWDM wavelength associated with pluggable module supported on this interface. Set value to 0 to auto detects and locks in the DWDM wavelength channel number of the first p…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.4.5.1.1.2

This table sets alarm severity for all Pluggable ports.

adGenPluggableAlarmSlotProvEntry row .1.3.6.1.4.1.664.5.70.4.5.2.1

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenPluggableAlarmSlotTxFaultLevel Sets the Pluggable Tx Fault alarm level (affects all Pluggable Ports)	Enumerationr/w Enumerated Values: 2 info 3 alert 4 minor 5 major 6 critical	.1.3.6.1.4.1.664.5.70.4.5.2.1.1
adGenPluggableAlarmSlotMissingLevel Sets the Pluggable Missing alarm level (affects all Pluggable Ports)	Enumerationr/w Enumerated Values: 2 info 3 alert 4 minor 5 major 6 critical	.1.3.6.1.4.1.664.5.70.4.5.2.1.2