ADTRAN-GENTRAPINFORM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
20

adTrapInformHostTable

table
.1.3.6.1.4.1.664.5.16.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adTrapInformHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENTRAPINFORM-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENTRAPINFORM-MIB::adTrapInformHostTable' 
Table of network management hosts to receive traps.
adTrapInformHostEntry row .1.3.6.1.4.1.664.5.16.2.1.1
Indexes
Column Syntax OID
adTrapInformHostIP
The IP address of the host for network management traps.
This is set by the agent when the row is created.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.5.16.2.1.1.1
adTrapInformConfirmationdeprecated
If enabled by the NMS, the agent will retransmit traps to this
host until confirmed or the retry limit is reached. On row
creation it is initialized by the device SNMP agent to the
disabled mode. If disabled, the agent…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.5.16.2.1.1.2
adTrapInformSeqNumConfirmed
The last trap sequence number confirmed by this host. On row
creation it is initialized by the device SNMP agent to the
last trap sequence number value. The NMS sets this instance for
each trap received to confirm recep…
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.664.5.16.2.1.1.3
adTrapInformSeqNumRequested
Setting this object to a trap sequence number will cause the agent
to retransmit this trap if it is still in it's memory. No retries
will be performed on this poll request, unless the trap requested
is currently still i…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.16.2.1.1.4
adTrapInformRetryLimit
The maximum number of times that the agent should send a trap to this
host. On row creation it is initialized by the device SNMP agent to 0.
If set to zero the agent will disable trap confirmation. If set greater than …
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.664.5.16.2.1.1.5
adTrapInformInitialTimeout
The initial timeout in seconds for each trap sent to a host management
station if confirmations are enabled. On each subsequent retry, the timeout
will be doubled. On row creation it is initialized by the device SNMP
ag…
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.664.5.16.2.1.1.6
adTrapInformCache
The maximum number of unconfirmed traps that will be retained in the
device SNMP agent for this host. On row creation it is initialized
by the device SNMP agent.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.16.2.1.1.7
adTrapInformHostStatus
The NMS sets this object to 'createRequest' to establish a new trap
host, sets any other columnar instances as needed, and then sets this
object to 'valid' to initiate its operation. This can all be done in
one PDU. If …
ADTRAN-TCEntryStatusr/w
Type Values:
1valid
2createRequest
3underCreation
4invalid
 .1.3.6.1.4.1.664.5.16.2.1.1.8
adTrapInformVersion
The SNMP version to be used by the agent for reporting traps to each
management station. The default is SNMPv2. Confirmations are determined
by the presence of a non zero retry limit.
Enumerationr/w
Enumerated Values:
1snmpV1
2snmpV2
3snmpV3
 .1.3.6.1.4.1.664.5.16.2.1.1.9

adTrapHostTable

table
.1.3.6.1.4.1.664.5.16.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENTRAPINFORM-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENTRAPINFORM-MIB::adTrapHostTable' 
Table of network management hosts to receive traps.
This trap table permits specifying multiple NMS hosts to receive traps.
The table is indexed to support entries of multiple address types.
adTrapHostEntry row .1.3.6.1.4.1.664.5.16.2.2.1
Indexes
Column Syntax OID
adTrapHostAddressType
The Internet Address type of the host for network management traps.

The network element will accept values that are supported. Relevant
feature flags (per genSystems.mi2) may be used to determine the leve…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.664.5.16.2.2.1.1
adTrapHostAddressSize
The Internet Address size (in octets) of the host for network management traps.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.664.5.16.2.2.1.2
adTrapHostAddress
The Internet address value of the host for network management traps.

The octet string size must accurately correspond to the value of
adTrapHostAddressType for this entry.

An address of typ…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.16.2.2.1.3
adTrapHostConfirmation
If enabled by the NMS, the agent will retransmit traps to this
host until confirmed or the retry limit is reached. On row
creation it is initialized by the device SNMP agent to the
disabled mode. If disabled, the agent…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.5.16.2.2.1.4
adTrapHostSeqNumConfirmed
The last trap sequence number confirmed by this host. On row
creation it is initialized by the device SNMP agent to the
last trap sequence number value. The NMS sets this instance for
each trap received to confirm recep…
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.664.5.16.2.2.1.5
adTrapHostSeqNumRequested
Setting this object to a trap sequence number will cause the agent
to retransmit this trap if it is still in its memory. No retries
will be performed on this poll request, unless the trap requested
is currently still in…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.16.2.2.1.6
adTrapHostRetryLimit
The maximum number of times that the agent should send a trap to this
host. On row creation it is initialized by the device SNMP agent to 0.
If set to zero the agent will disable trap confirmation. If set greater than z…
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.664.5.16.2.2.1.7
adTrapHostInitialTimeout
The initial timeout in seconds for each trap sent to a host management
station if confirmations are enabled. On each subsequent retry, the timeout
will be doubled. On row creation it is initialized by the device SNMP
ag…
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.664.5.16.2.2.1.8
adTrapHostCache
The maximum number of unconfirmed traps that will be retained in the
device SNMP agent for this host. On row creation it is initialized
by the device SNMP agent.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.16.2.2.1.9
adTrapHostVersion
The SNMP version to be used by the agent for reporting traps to each
management station. The default is SNMPv2. Confirmations are determined
by the presence of a non-zero retry limit.
Enumerationr/w
Enumerated Values:
1snmpV1
2snmpV2
3snmpV3
 .1.3.6.1.4.1.664.5.16.2.2.1.10
adTrapHostRowStatus
The NMS sets this object to 'createAndWait' to establish a new trap
host, sets any other columnar instances as needed, and then sets this
object to 'active' to initiate its operation. This can all be done in
one PDU. If…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.664.5.16.2.2.1.11