ADTRAN-GENPOLICER-MIB Table View

The Policer provisioning table.

adGenPolicerEntry row .1.3.6.1.4.1.664.5.70.35.1.1.1

An entry in the Policer provisioning table. Policer entries
are uniquely identified by Slot as well as by the Policer Name.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenPolicerName

Column	Syntax	OID
adGenPolicerName A user configurable name for the Policer. Upon creation of the Policer, the associated name will default to a unique value.	SNMPv2-TCDisplayString Constraints: range: 1-50 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.1.1.1
adGenPolicerRowStatus This object is used to create a new row or modify or delete an existing row in the Policer table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.35.1.1.1.2
adGenPolicerStatus This variable provides the Policer status. If there is no error, the Policer status will be 'running'. If there is an error and the Policer cannot be applied, then this variable will provide more details about the err…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.1.1.3
adGenPolicerOperStatus This variable provides the current operational status of the Policer.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.664.5.70.35.1.1.1.4
adGenPolicerCIR This variable is used to configure the Committed Information Rate (CIR) for the policer. The CIR is the rate in kbps up to which service frames are delivered according to the service performance objectives.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.1.1.5
adGenPolicerCBS This variable is used to configure the Committed Burst Size (CBS) for the policer. The CBS is the maximum available bytes for a burst of ingress traffic sent at the UNI speed while still conforming to the CIR.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.1.1.6
adGenPolicerEIR This variable is used to configure the Excess Information Rate (EIR) for the policer. The EIR is the rate in kbps up to which service frames are delivered without any performance objectives.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.1.1.7
adGenPolicerEIRNoLimit A boolean indicating whether you want to configure EIR for no limit (max-bandwidth). If you configure value of EIR using adGenPolicerEIR, this should be set to FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.664.5.70.35.1.1.1.8
adGenPolicerEBS This variable is used to configure the Excess Burst Size (EBS) for the policer. TThe EBS is the maximum available bytes for a burst of ingress traffic sent at the UNI speed while still conforming to the EIR.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.1.1.9
adGenPolicerMode This variable provisions the type of the policer. * Use the unspecified option to remove currently selected per mode option. Also this is a default value when per mode is not explicitly selected. * Use the perUNI opt…	Enumerationr/w Enumerated Values: 1 unspecified 2 perUNI 3 perInterface 4 perEVC 5 perMEVC 6 perEVCMap	.1.3.6.1.4.1.664.5.70.35.1.1.1.10
adGenPolicerUNIPort This variable is used if adGenPolicerMode is set to perUNI option. It specifies the interface index to apply the policer to a particular UNI.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.664.5.70.35.1.1.1.11
adGenPolicerEVCName This variable is used if adGenPolicerMode is set to perEVC option. It specifies the name of the EVC to apply the policer to a particular EVC.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.1.1.12
adGenPolicerMEVCName This variable is used if adGenPolicerMode is set to perMEVC option. It specifies the name of the MEVC to apply the policer to a particular MEVC.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.1.1.13
adGenPolicerCEVlanPriority This variable is used if adGenPolicerMode is set to perMEVC option and the policer is to be applied to a particular range of CE VLAN priority traffic within an MEVC. It specifies the value of the CE VLAN priority to app…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.1.1.14
adGenPolicerAddEvcMap This variable is used if adGenPolicerMode is set to perEVCMap option. It is used to add a map to the policer. It specifies the EVC Map to apply the policer to all traffic on a particular map. Use adGenPolicerEVCMapLooku…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.1.1.15
adGenPolicerRemoveEvcMap This variable is used if adGenPolicerMode is set to perEVCMap option. It is used to remove an EVC Map from the policer. Use adGenPolicerEVCMapLookupTable to list all configured Evc Maps.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.1.1.16
adGenPolicerLastError This string describes the last error experienced for this particular entry in the table.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.1.1.17

The Policer 15 minute threshold table.

adGenPolicer15MinThresholdEntry row .1.3.6.1.4.1.664.5.70.35.1.2.1.1

An entry in the Policer 15 minute threshold table. Each entry
is uniquely identified by Slot as well as by the Policer Name.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenPolicerName

Column	Syntax	OID
adGenPolicer15MinThresholdDiscardsGreenFrames The 15 minute performance monitoring threshold associated with the number of green frames dropped due to congestion.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.1.1.1
adGenPolicer15MinThresholdTotalGreenFrames The 15 minute performance monitoring threshold associated with the number of all ingress frames colored green.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.1.1.2
adGenPolicer15MinThresholdDiscardsYellowFrames The 15 minute performance monitoring threshold associated with the number of yellow frames dropped due to congestion.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.1.1.3
adGenPolicer15MinThresholdTotalYellowFrames The 15 minute performance monitoring threshold associated with the number of all ingress frames colored yellow.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.1.1.4
adGenPolicer15MinThresholdTotalRedFrames The 15 minute performance monitoring threshold associated with the number of all ingress frames colored red.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.1.1.5

The Policer 24 hour threshold table.

adGenPolicer24HrThresholdEntry row .1.3.6.1.4.1.664.5.70.35.1.2.2.1

An entry in the Policer 24 hour threshold table. Each entry
is uniquely identified by Slot as well as by the Policer Name.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenPolicerName

Column	Syntax	OID
adGenPolicer24HrThresholdDiscardsGreenFrames The 24 hour performance monitoring threshold associated with the number of green frames dropped due to congestion.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.2.1.1
adGenPolicer24HrThresholdTotalGreenFrames The 24 hour performance monitoring threshold associated with the number of all ingress frames colored green.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.2.1.2
adGenPolicer24HrThresholdDiscardsYellowFrames The 24 hour performance monitoring threshold associated with the number of yellow frames dropped due to congestion.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.2.1.3
adGenPolicer24HrThresholdTotalYellowFrames The 24 hour performance monitoring threshold associated with the number of all ingress frames colored yellow.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.2.1.4
adGenPolicer24HrThresholdTotalRedFrames The 24 hour performance monitoring threshold associated with the number of all ingress frames colored red.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.2.2.1.5

The Policer Creation Error table.

adGenPolicerErrorEntry row .1.3.6.1.4.1.664.5.70.35.1.3.1

An entry in the Policer Creation Error table.
The index, adGenSlotInfoIndex, identifies the SLOT.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenPolicerError Returns information about the last error for the Policer create on SLOT. If row creation fails, this string will provide details about why the row could not be created.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.3.1.1

The table to display Policer information associated with the Slot.

adGenPolicerLookupEntry row .1.3.6.1.4.1.664.5.70.35.1.4.1

An entry in the policer information table. Each entry in the table
is uniquely indentified by Slot as well as by the Policer name.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenPolicerName

Column	Syntax	OID
adGenPolicerActualCIR This variable displays the actual Committed Information Rate (CIR) for the policer. The CIR is the rate in kbps up to which service frames are delivered according to the service performance objectives.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.4.1.1
adGenPolicerActualCBS This variable displays the actual Committed Burst Size (CBS) for the policer. The CBS is the maximum available bytes for a burst of ingress traffic sent at the UNI speed while still conforming to the CIR.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.4.1.2
adGenPolicerActualEIR This variable displays the actual Excess Information Rate (EIR) for the policer. The EIR is the rate in kbps up to which service frames are delivered without any performance objectives.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.4.1.3
adGenPolicerActualEBS This variable displays the actual Excess Burst Size (EBS) for the policer. The EBS is the maximum available bytes for a burst of ingress traffic sent at the UNI speed while still conforming to the EIR.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.4.1.4
adGenPolicerProvNumberOfEVCMaps This variable displays the count of Provisioned EVC maps that are connected to the policer.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.4.1.5
adGenPolicerQualifiedNumberOfEVCMaps This variable displays the count of Qualified EVC maps that are connected to the policer. The qualified Evc Maps are the Maps associated to MEVC,EVC, EVC Map, UNI or Interface based on adGenPolicerMode settings.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.4.1.6

The lookup table to display Provisioned EVC Maps names associated with a policer.

adGenPolicerEVCMapLookupEntry row .1.3.6.1.4.1.664.5.70.35.1.5.1

An entry in the policer EVC Map lookup table.
The first index, adGenSlotInfoIndex, identifies the SLOT.
The second index, adGenPolicerFixedLengthName, identifies the Policer.
The third index, adGenPolicerEVCMapLookupInd…

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenPolicerFixedLengthName adGenPolicerEVCMapLookupIndex

Column	Syntax	OID
adGenPolicerFixedLengthName A user configured name for the Policer. This string matches adGenPolicerName from adGenPolicerTable, but it is padded at the end with 0x00 so that the table index has a fixed length of 50 characters.	OctetString Constraints: range: 50-50	.1.3.6.1.4.1.664.5.70.35.1.5.1.1
adGenPolicerEVCMapLookupIndex This variable is used as an index into the EVC maps associated with the policer.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.5.1.2
adGenPolicerEVCMapLookupName This variable list the EVC map name that is associated with the policer.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.5.1.3

The lookup table to display Qualified EVC Maps names associated with a policer. The qualified
Evc Maps are the Maps associated to MEVC,EVC, EVC Map, UNI or Interface based on adGenPolicerMode
settings.

adGenPolicerQualifiedEVCMapLookupEntry row .1.3.6.1.4.1.664.5.70.35.1.6.1

An entry in the policer Qualified EVC Map lookup table.
The first index, adGenSlotInfoIndex, identifies the SLOT.
The second index, adGenPolicerFixedLengthName, identifies the Policer.
The third index, adGenPolicerQuali…

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenPolicerFixedLengthName adGenPolicerQualifiedEVCMapLookupIndex

Column	Syntax	OID
adGenPolicerQualifiedEVCMapLookupIndex This variable is used as an index into the Qualified EVC maps associated with the policer.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.35.1.6.1.1
adGenPolicerQualifiedEVCMapLookupName This variable list the Qualified EVC map name that is associated with the policer.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.35.1.6.1.2
adGenPolicerQualifiedEVCMapLookupStatus This variable list the Qualified Evc Map Policed Status that is associated with the policer. * Evc Map policed Status of disabled indicates that the associated policer is not in the running state. * Evc Map policed st…	Enumeration Enumerated Values: 1 disabled 2 notApplied 3 applied	.1.3.6.1.4.1.664.5.70.35.1.6.1.3