ADTRAN-GENFXO-MIB Table View

This table supports provisioning of interface-level FXO parameters.
Used in conjunction with adGenFxoInterfaceProv.

adGenFxoInterfaceProvEntry row .1.3.6.1.4.1.664.5.70.38.1.2.1.1

An entry in the adGenFxoInterfaceProvTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adGenFxoInterfaceLastErrorString The reason for the last error that occured while accessing an entry in the FXO Interface Prov Table.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.1
adGenFxoInterfaceSignalingMode Use to set signaling mode of the 2-Wire interface. 1 = loopStart Loop-Start signaling. 2 = groundStart Ground-Start signaling. 3 = tr08sp TR-08 Single Party signaling. 4 = tr08uvg TR-08 Universal Voic…	Enumerationr/w Enumerated Values: 1 loopStart 2 groundStart 3 tr08sp 4 tr08uvg	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.2
adGenFxoInterfaceTxGain Set gain from the line (A/D).	0.1dBSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.3
adGenFxoInterfaceMinTxGain Range of adGenFxoInterfaceTxGain varies by product. Retrieve minimum valid Tx Gain value for use in range checking.	0.1dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.4
adGenFxoInterfaceMaxTxGain Range of adGenFxoInterfaceTxGain varies by product. Retrieve maximum valid Tx Gain value for use in range checking.	0.1dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.5
adGenFxoInterfaceRxGain Set gain toward the line (D/A).	0.1dBSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.6
adGenFxoInterfaceMinRxGain Range of adGenFxoInterfaceTxGain varies by product. Retrieve minimum valid Rx Gain value for use in range checking.	0.1dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.7
adGenFxoInterfaceMaxRxGain Range of adGenFxoInterfaceTxGain varies by product. Retrieve maximum valid Rx Gain value for use in range checking.	0.1dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.8
adGenFxoInterfaceImpedance Use to set the terminating impedance of the interface. 1 = z600r 600 Ohms. 2 = z900z 900 Ohms + 2.16 uF. 3 = z1 220 + ( 820 // 115nF). 4 = z2 270 + ( 750 // 150nF). 5 = z3 …	Enumerationr/w Enumerated Values: 1 z600r 2 z900z 3 z1 4 z2 5 z3 6 z4 7 z5 8 z6 9 z7 10 z8 11 z9 12 z10	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.9
adGenFxoInterfaceCWCIdAckGenDelay Use to set the Call-Waiting Caller-ID ACK generation delay.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.10
adGenFxoInterfaceCWCIdAckGenEnable Use to enable/disable Caller-ID ACK generation during Call-Waiting interval.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.11
adGenFxoInterfaceTargetFxsLocation Use to connect FXO interface to an FXS interface.	AdGenFxoInterfaceFxsLocationr/w Type Constraints: range: 1..40	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.12
adGenFxoInterfaceRingTripMode Use to set the ring-trip mode of the interface. 1 = normal Use a normal off-hook to trip ringing voltage. 2 = forced Force a ring-ground on loop to sink ringing current. 3 = delayed Wait until ring p…	Enumerationr/w Enumerated Values: 1 normal 2 forced 3 delayed	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.13
adGenFxoInterfaceRingTripDuration Use to set duration of the ring-ground interval in 'forced' ring-trip mode.	millisecondsUnsigned32r/w Constraints: range: 50-300	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.14
adGenFxoInterfaceRingTripMuteInterval Use to set a delay before enabling the voice path when going off-hook, exiting the 'forced' or 'delayed' ring-trip modes. Valid values are <0,20-400> ('0' to disable).	millisecondsUnsigned32r/w Constraints: range: 0-400	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.15
adGenFxoCircuitIdentifier The circuit identifier string for the fxo port.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.664.5.70.38.1.2.1.1.16

This table supports retrieval of interface-level FXO status.
Used in conjunction with adGenFxoInterfaceStatus.

adGenFxoInterfaceStatusEntry row .1.3.6.1.4.1.664.5.70.38.2.2.1.1

An entry in the adGenFxoInterfaceStatusTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adGenFxoPortActive This object describes whether a call is in progress (active) or not.	Enumeration Enumerated Values: 1 active 2 inactive 3 disabled	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.1
adGenFxoLoopFeed This object describes what the interface is currently presenting to the loop.	Enumeration Enumerated Values: 1 open 2 closed 3 ringGround	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.2
adGenFxoLoopState This object describes the current state of the loop, as it is presented to the interface. 1 = lcf Loop Current Feed (Battery). 2 = rlcf Reverse Loop Current Feed. 3 = lcfo Loop Curre…	Enumeration Enumerated Values: 1 lcf 2 rlcf 3 noBatt 4 tipOpen 5 ringing	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.3
adGenFxoTestActive This object describes whether the interface is currently under test (active) or not.	Enumeration Enumerated Values: 1 active 2 inactive 3 disabled	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.4
adGenFxoRxVoicePackets This object describes the number of voice packets received from the network on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.5
adGenFxoRxControlPackets This object describes the number of control packets received from the network on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.6
adGenFxoTxVoicePackets This object describes the number of voice packets transmitted to the network on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.7
adGenFxoTxControlPackets This object describes the number of control packets transmitted to the network on this interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.8
adGenFxoClearPortCounters Write to this object to clear all interface-level packet counters.	Enumerationr/w Enumerated Values: 1 clear	.1.3.6.1.4.1.664.5.70.38.2.2.1.1.9

This table supports discovery of links between FXO and FXS ports, indexed
by the far-end FXS port. (For finding links by FXO port, use
adGenFxoInterfaceProvTable > adGenFxoInterfaceTargetFxsLocation.

adGenFxoFindFxsMapEntry row .1.3.6.1.4.1.664.5.70.38.2.3.1.1

An entry in the adGenFxoFindFxsMapTable.

Indexes

IF-MIBifIndex adGenFxoInterfaceFxsIndex

Column	Syntax	OID
adGenFxoInterfaceFxsIndex The FXS Location Index.	AdGenFxoInterfaceFxsLocation Type Constraints: range: 1..40	.1.3.6.1.4.1.664.5.70.38.2.3.1.1.1
adGenFxoInterfaceFound The ifIndex of the FXO port associated with the specified FXS location. A value of '0' means that a link was not found on this device.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.664.5.70.38.2.3.1.1.2

This table supports the use of interface-level FXO tests.
Used in conjunction with adGenFxoInterfaceTests.

adGenFxoInterfaceTestsEntry row .1.3.6.1.4.1.664.5.70.38.3.2.1.1

An entry in the adGenFxoInterfaceTestsTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adGenFxoPortClearTest Write to this object to exit all running interface-level tests.	Enumerationr/w Enumerated Values: 1 clear	.1.3.6.1.4.1.664.5.70.38.3.2.1.1.1
adGenFxo1004HzToneTest Use to enable or disable a 1004Hz tone test. 1 = near Send tone to the loop. 2 = far Send tone to the network. 3 = disable Turn off tone.	Enumerationr/w Enumerated Values: 1 near 2 far 3 disable	.1.3.6.1.4.1.664.5.70.38.3.2.1.1.2
adGenFxoLoopStateTest This object describes what the interface is currently presenting to the loop.	Enumerationr/w Enumerated Values: 1 disable 2 open 3 close 4 ringGround	.1.3.6.1.4.1.664.5.70.38.3.2.1.1.3
adGenFxoInwardLoopbackTest Use to enable or disable a loopback towards the backplane.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.664.5.70.38.3.2.1.1.4
adGenFxoOutwardLoopbackTest Use to enable or disable a loopback towards the loop.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.664.5.70.38.3.2.1.1.5