ADTRAN-GENESCU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
22

adGenESCUProvTable

table
.1.3.6.1.4.1.664.5.17.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenESCUProvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENESCU-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENESCU-MIB::adGenESCUProvTable' 
The SCU Prov table.
adGenESCUProvEntry row .1.3.6.1.4.1.664.5.17.2.1.1
An entry in the SCU Provisioning table.
Indexes
Column Syntax OID
adGenESCUadminPortRate
A Set changes the admin port baud rate to the set
value. A Get retrieves the current baud rate.
Enumerationr/w
Enumerated Values:
1baud9600
2baud19200
3baud38400
4baud57600
5baud115200
 .1.3.6.1.4.1.664.5.17.2.1.1.1
adGenESCUautoLogoff
Enables or disables the Terminal Auto-Logoff.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.664.5.17.2.1.1.2
adGenESCUautoLogoffTimer
Selects the Terminal Auto-Logoff time.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.664.5.17.2.1.1.3
adGenESCUmoduleAutoProv
Enables or disables Access Module Auto-Provisioning.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.664.5.17.2.1.1.4
adGenESCUmuxAutoProv
Enables or disables Mux Auto-Provisioning.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.664.5.17.2.1.1.5
adGenESCUrestoreFactoryDefaults
A Set restores ALL provisioning to the factory defaults.
A get is meaningless and always returns a 1.
Enumerationr/w
Enumerated Values:
1restoreFactoryDefaults
 .1.3.6.1.4.1.664.5.17.2.1.1.6
adGenESCUadminPortMode
A Set changes the admin port mode for menus or TL1 access.
A Get retrieves the current mode.
Enumerationr/w
Enumerated Values:
1menus
2tl1
 .1.3.6.1.4.1.664.5.17.2.1.1.7
adGenESCUcraftPortRate
A Set changes the craft port baud rate to the set
value. A Get retrieves the current baud rate.
Enumerationr/w
Enumerated Values:
1baud9600
2baud19200
3baud38400
4baud57600
5baud115200
 .1.3.6.1.4.1.664.5.17.2.1.1.8
adGenESCUadminSecurityEnable
Require authentication.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.5.17.2.1.1.9

adGenESCUStatusTable

table
.1.3.6.1.4.1.664.5.17.3.1 · 1 row entry · 10 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenESCUStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENESCU-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENESCU-MIB::adGenESCUStatusTable' 
The SCU Status table.
adGenESCUStatusEntry row .1.3.6.1.4.1.664.5.17.3.1.1
An entry in the SCU Status table.
Indexes
Column Syntax OID
adGenESCUacoStatus
Indicates whether or not the alarm cut-off is on.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.664.5.17.3.1.1.1
adGenESCUacoinStatus
Indicates whether or not the alarm cut-off input
is active.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.664.5.17.3.1.1.2
adGenESCUrmtinStatus
Indicates whether or not the remote alarm input
is active.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.664.5.17.3.1.1.3
adGenESCUextin1Status
Indicates whether or not the external alarm input #1
is active.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.664.5.17.3.1.1.4
adGenESCUextin2Status
Indicates whether or not the external alarm input #2
is active.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.664.5.17.3.1.1.5
adGenESCUminus48PowerAStatus
Indicates whether or not the minus 48V power supply
A is active.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.664.5.17.3.1.1.6
adGenESCUminus48PowerBStatus
Indicates whether or not the minus 48V power supply
B is active.
Enumeration
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.664.5.17.3.1.1.7
adGenESCUopenFuseStatus
Indicates whether one or more card fuses on this
chassis is open.
Enumeration
Enumerated Values:
1normal
2open
 .1.3.6.1.4.1.664.5.17.3.1.1.8
adGenESCUCLLI
The Common Language Location Identifier of this chassis,
assigned at the craft port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.664.5.17.3.1.1.9
adGenESCUTIRKSID
The Trunk Information Record Keeping System unit number
assigned to this shelf, assigned at the craft port.
Integer32
Constraints:
range: 1-254
 .1.3.6.1.4.1.664.5.17.3.1.1.10

adGenESCUTestTable

table
.1.3.6.1.4.1.664.5.17.4.1 · 1 row entry · 3 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenESCUTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENESCU-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENESCU-MIB::adGenESCUTestTable' 
The SCU Test table.
adGenESCUTestEntry row .1.3.6.1.4.1.664.5.17.4.1.1
An entry in the SCU Test table.
Indexes
Column Syntax OID
adGenESCUReset
A Set restarts the SCU and performs unit self-test.
A get always returns a 1.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.17.4.1.1.1
adGenESCUselfTestResults
Contains the results of the self test performed on startup.
This can be from a commanded reset, or card insertion.
The text will read 'PASSED', or 'FAILED - xxxx' where
xxxx will be an explanation of the error(s) encoun…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.17.4.1.1.2
adGenESCUChassisLampTest
A set causes the SCU to initiate a lamp test concurrently on
every card in the chassis, for a pre-determined duration.
A get always returns a 1.
Enumerationr/w
Enumerated Values:
1initiate
 .1.3.6.1.4.1.664.5.17.4.1.1.3