ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
9
Rows
9
Columns
59
.1.3.6.1.4.1.664.5.70.43.1.1
·
1 row entry
·
2 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMConfigurationTable'
Configuration table.
Table Entry.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This shows the supported Grid Spacing.
Bit positions: 0 - 50 GHz Grid Spacing supported 1 - 100 GHz Grid Spacing supported |
Bits Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.1.1.1.1 |
||||
|
This can be used to remove all Cross Connect at once.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.1.1.1.2 |
.1.3.6.1.4.1.664.5.70.43.2.1
·
1 row entry
·
9 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMProvInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMProvInterfaceTable'
Provision Interface table.
Table Entry.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
A short description for this optical interface.
|
OctetStringr/w Constraints: range: 1-50 |
.1.3.6.1.4.1.664.5.70.43.2.1.1.1 |
||||
|
This OID defines the channel power level reference
for all the channels coming in on ADD-IN or EXP-IN interfaces to be auto power balanced. This value will be used when auto power balance is enabled |
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.1.1.2 |
||||
|
This OID can be used to set the auto
power balancing mode on this interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.2.1.1.3 |
||||
|
This sets the upper limit of the OCM Power threshold. Once reached,
an alarm will be issued |
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.1.1.4 |
||||
|
This sets the lower limit of the OCM Power threshold. Once reached,
an alarm will be issued |
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.1.1.5 |
||||
|
This sets the upper limit of the Power threshold. Once reached,
an alarm will be issued |
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.1.1.6 |
||||
|
This sets the lower limit of the Power threshold. Once reached,
an alarm will be issued |
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.1.1.7 |
||||
|
This sets the Insertion Loss of connected device.
|
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.1.1.8 |
||||
|
This OID sets the gain of the amplifier
|
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.1.1.9 |
.1.3.6.1.4.1.664.5.70.43.2.2
·
1 row entry
·
8 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMProvInterfaceSupportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMProvInterfaceSupportTable'
Provision Interface Support table.
Table Entry.
| Column | Syntax | OID |
|---|---|---|
|
This retrieves the minimum value of the OCM Total Power threshold high
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.2.1.1 |
|
This retrieves the maximum value of the OCM Total Power threshold high
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.2.1.2 |
|
This retrieves the minimum value of the OCM Total Power threshold low
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.2.1.3 |
|
This retrieves the maximum value of the OCM Total Power threshold low
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.2.1.4 |
|
This retrieves the minimum value of the Total Power threshold high
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.2.1.5 |
|
This retrieves the maximum value of the Total Power threshold high
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.2.1.6 |
|
This retrieves the minimum value of the Total Power threshold low
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.2.1.7 |
|
This retrieves the maximum value of the Total Power threshold low
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.2.2.1.8 |
.1.3.6.1.4.1.664.5.70.43.3.1
·
1 row entry
·
14 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMProvChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMProvChannelTable'
Provision Channel table.
Table Entry.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This identifies the Channel Gridspacing associated with this ifIndex.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.3.1.1.1 |
||||||||||||
|
This object is used to create a new row or modify or delete an
existing row in the Channel table. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.664.5.70.43.3.1.1.2 |
||||||||||||
|
A short description for this optical channel interface.
|
OctetStringr/w Constraints: range: 1-50 |
.1.3.6.1.4.1.664.5.70.43.3.1.1.3 |
||||||||||||
|
This identifies the Channel Number associated with this ifIndex.
Values are multiplied by 100. Example: Channel 17 will be 1700 Channel 17.25 will be 1725 Channel 60.5 will be 6050 |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.1.1.4 |
||||||||||||
|
This identifies the Channel Frequency associated with this ifIndex.
|
Tera HzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.1.1.5 |
||||||||||||
|
This identifies the Channel wavelength associated with this ifIndex.
|
Pico MetersSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.1.1.6 |
||||||||||||
|
This identifies the Channel Power control associated with this ifIndex.
This value can be used to set override the power at the channel level. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.3.1.1.7 |
||||||||||||
|
This OID can be used to set the channel power level. This
value will be used if auto power balancing is disabled. The channels coming in on ADD-IN or EXP-IN interfaces will be attenuated to this power level. This is onl… |
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.1.1.8 |
||||||||||||
|
This OID can be used to set the attenuation. This
value will be used if auto power balancing is disabled and the module needs to operate in constant attenuation mode. This is only used when the power control override on… |
Tenth of a dBSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.1.1.9 |
||||||||||||
|
This sets the upper limit of the OCM Power threshold. Once reached,
an alarm will be issued |
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.1.1.10 |
||||||||||||
|
This sets the lower limit of the OCM Power threshold. Once reached,
an alarm will be issued |
Tenth of a dBmSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.1.1.11 |
||||||||||||
|
This string describes display the cross connect name that channel
is part of. If the channel is not part of any cross connect then it will be set to None. |
OctetString | .1.3.6.1.4.1.664.5.70.43.3.1.1.12 |
||||||||||||
|
This shows the current oper status of the selected Channel.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.3.1.1.13 |
||||||||||||
|
This sets the administration status of the selected Channel.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.3.1.1.14 |
.1.3.6.1.4.1.664.5.70.43.3.2
·
1 row entry
·
10 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMProvChannelSupportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMProvChannelSupportTable'
Provision Channel table.
Table Entry.
| Column | Syntax | OID |
|---|---|---|
|
This OID retrieves the minimum value of the power level which
can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.1 |
|
This OID retrieves the maximum value of the power level which
can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.2 |
|
This OID retrieves the minimum value of the attenuation which
can be set |
Tenth of a dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.3 |
|
This OID retrieves the maximum value of the attenuation which
can be set |
Tenth of a dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.4 |
|
This retreives the minimum value of the OCM Threshold high
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.5 |
|
This retreives the maximum value of the OCM Threshold high
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.6 |
|
This retreives the minimum value of the OCM Threshold low
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.7 |
|
This retreives the maximum value of the OCM Threshold low
that can be set |
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.8 |
|
This retreives the minimum supported wavelength value.
|
PicoMeterSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.9 |
|
This retreives the maximum supported wavelength value.
|
PicoMeterSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.3.2.1.10 |
.1.3.6.1.4.1.664.5.70.43.4.1
·
1 row entry
·
8 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMCrossConnectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMCrossConnectTable'
Cross Connect table.
Table Entry.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This OID specifies the cross connect name. This is a unique name that
identifies the cross connect in that slot. |
OctetString Constraints: range: 1-50 |
.1.3.6.1.4.1.664.5.70.43.4.1.1.1 |
||||||||||||
|
This object is used to create a new row or modify or delete an
existing row in the Cross Connect table. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.664.5.70.43.4.1.1.2 |
||||||||||||
|
This ifIndex OID specifies the source slot, optical interface and channel.
|
IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.664.5.70.43.4.1.1.3 |
||||||||||||
|
This OID specifies the source gridspacing.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.4.1.1.4 |
||||||||||||
|
This ifIndex OID specifies the destination slot and optical interface.
|
IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.664.5.70.43.4.1.1.5 |
||||||||||||
|
This OID displays the current Operation Status of this Cross Connect.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.4.1.1.6 |
||||||||||||
|
This OID displays the error in creating the cross connect. Also during
operation, this will display any errors that caused operation status to go down. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.70.43.4.1.1.7 |
||||||||||||
|
This sets the administration status of the selected Channel.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.43.4.1.1.8 |
.1.3.6.1.4.1.664.5.70.43.5.1
·
1 row entry
·
2 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMProvErrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMProvErrorTable'
Provision Channel Error table.
Table Entry.
| Column | Syntax | OID |
|---|---|---|
|
Returns information about the last error for the Channel
creation. This is SLOT indexed. If row creation fails, this string will provide details about why the row could not be created. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.70.43.5.1.1.1 |
|
Returns information about the last error for the Cross connect
creation. This is SLOT indexed. If row creation fails, this string will provide details about why the row could not be created. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.70.43.5.1.1.2 |
.1.3.6.1.4.1.664.5.70.43.6.1
·
1 row entry
·
4 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMInterfaceStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMInterfaceStatusTable'
Status table.
Table Interface Entry.
| Column | Syntax | OID |
|---|---|---|
|
This displays the Total OCM current power value of the selected index.
|
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.6.1.1.1 |
|
This displays the Total current power value of the selected index.
|
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.6.1.1.2 |
|
This displays the power gain of the selected index.
|
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.6.1.1.3 |
|
This displays the input power of the selected index.
|
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.6.1.1.4 |
.1.3.6.1.4.1.664.5.70.43.6.2
·
1 row entry
·
2 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenOpticalADMChannelStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENERIC-OPTICAL-ADD-DROP-MULTIPLEXER-MIB::adGenOpticalADMChannelStatusTable'
Channel Status table.
Table Channel Entry.
| Column | Syntax | OID |
|---|---|---|
|
This displays the Channel current power value of the selected index.
|
Tenth of a dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.6.2.1.1 |
|
This displays the Channel current attenuation value of the selected index.
|
Tenth of a dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.43.6.2.1.2 |