ADTRAN-GENDS1TEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
18

adGenDS1TestCommandTable

table
.1.3.6.1.4.1.664.5.78.1.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenDS1TestCommandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENDS1TEST-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENDS1TEST-MIB::adGenDS1TestCommandTable' 
This table supports DS1 test command parameters.
adGenDS1TestCommandEntry row .1.3.6.1.4.1.664.5.78.1.1.1.1
An entry in the adGenDS1TestCommandTable.
Indexes
Column Syntax OID
adGenDS1TestTimeout
- This object defines the number of minutes that any near end or any far end test will
be run.
- Any locally initiated loopback or BERT, any local response to a remotely requested
loopback, and any local request for a f…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.78.1.1.1.1.1
adGenDS1TestStartStop
nearEndStart - INITIALIZES and starts any near end test and counters
farEndStart - INITIALIZES and starts any far end test and counters
allStop - terminates all tests and freezes status counters of all tests.
Enumerationr/w
Enumerated Values:
1nearEndStart
2farEndStart
3allStop
 .1.3.6.1.4.1.664.5.78.1.1.1.1.2
adGenDS1TestStatus
DS1 Test Status:
- TBD
Enumeration
Enumerated Values:
1none
2nearEndLine
3nearEndPayload
4nearEndCsu
5nearEndFdlPayload
6nearEndFeacLine
7pattQrss
8pattOneInEight
9pattAllOnes
10pattAllZeros
11farEndPattQrssCsu
12farEndPattOneInEightCsu
13farEndPattAllOnesCsu
14farEndPattAllZerosCsu
15farEndPattQrssFdlPayload
16farEndPattOneInEightFdlPayload
17farEndPattAllOnesFdlPayload
18farEndPattAllZerosFdlPayload
19farEndPattQrssFac2niu
20farEndPattOneInEightFac2niu
21farEndPattAllOnesFac2niu
22farEndPattAllZerosFac2niu
23farEndPattQrssFeac
24farEndPattOneInEightFeac
25farEndPattAllOnesFeac
26farEndPattAllZerosFeac
27nearEndFac2niu
28farEndCsu
29farEndFdlPayload
30farEndFac2Niu
31farEndFeac
32nearEndInward
33nearEndCsuInward
34nearEndFac2niuInward
35pattTwoInEight
36pattThreeInTwentyFour
37patt2to23
38patt2to15
39patt2to20
40patt511
41farEndPattTwoInEightCsu
42farEndPattTwoInEightFdlPayload
43farEndPattTwoInEightFac2Niu
44farEndPattTwoInEightFeac
45farEndPattThreeInTwentyFourCsu
46farEndPattThreeInTwentyFourFdlPayload
47farEndPattThreeInTwentyFourFac2Niu
48farEndPattThreeInTwentyFourFeac
49farEndFdlLine
50farEndNiuInband
 .1.3.6.1.4.1.664.5.78.1.1.1.1.3
adGenDS1TestTimeRemaining
Initialized to adGenDS1TestTimeout upon reception of a Start object.
0 = occurs when near end test has ended.
0 = occurs when near end test is in progress, but timeout has been disabled.
>0 = occurs when near end test…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.78.1.1.1.1.4
adGenDS1TestTimeElapsed
0 = initialization value at instance a test starts.
>0 = occurs when near end test is in progress or just ended.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.78.1.1.1.1.5

adGenDS1TestNearEndLoopbackTable

table
.1.3.6.1.4.1.664.5.78.1.2.1 · 1 row entry · 1 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenDS1TestNearEndLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENDS1TEST-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENDS1TEST-MIB::adGenDS1TestNearEndLoopbackTable' 
This table supports DS1 Test Near End Loopback parameters.
adGenDS1TestNearEndLoopbackEntry row .1.3.6.1.4.1.664.5.78.1.2.1.1
An entry in the adGenDS1TestNearEndLoopbackTable.
Indexes
Column Syntax OID
adGenDS1TestNearEndLoopbackType
- This object selects the near end loopback that will be executed upon recognition of
a start test.
Enumerationr/w
Enumerated Values:
1line
2payload
3inward
 .1.3.6.1.4.1.664.5.78.1.2.1.1.1

adGenDS1TestFarEndLoopbackTable

table
.1.3.6.1.4.1.664.5.78.1.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenDS1TestFarEndLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENDS1TEST-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENDS1TEST-MIB::adGenDS1TestFarEndLoopbackTable' 
This table supports DS1 Test Far End Loopback parameters.
adGenDS1TestFarEndLoopbackEntry row .1.3.6.1.4.1.664.5.78.1.3.1.1
An entry in the adGenDS1TestFarEndLoopbackTable.
Indexes
Column Syntax OID
adGenDS1TestFarEndLpbkType
- This object selects the far end loopback that will be executed upon recognition of
the adGenDS1TestFarEndStart object.
Enumerationr/w
Enumerated Values:
1none
2csu
3fdlPayload
4fac2niu
5feac
6fdlLine
7niuInband
 .1.3.6.1.4.1.664.5.78.1.3.1.1.1
adGenDS1TestFarEndCSURequest
Enable/Disable Respond to incoming CSU Loop Up request.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.78.1.3.1.1.2
adGenDS1TestFarEndFDLRequest
Enable/Disable Respond to incoming FDL Payload Loop Up request.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.78.1.3.1.1.3
adGenDS1TestFarEndFEACRequest
Enable/Disable Respond to incoming FEAC DS1 Line Port Loop Up request.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.78.1.3.1.1.4
adGenDS1TestFarEndFAC2NIURequest
Enable/Disable Respond to incoming FAC2 NIU Loop Up request.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.78.1.3.1.1.5
adGenDS1TestFarEndCSUInwardRequest
Enable/Disable Response to incoming CSU-Inward Loop Up request.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.78.1.3.1.1.6
adGenDS1TestFarEndFAC2NIUInwardRequest
Enable/Disable Response to incoming FAC2 NIU-Inward Loop Up request.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.78.1.3.1.1.7

adGenDS1TestPatternTable

table
.1.3.6.1.4.1.664.5.78.1.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenDS1TestPatternTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GENDS1TEST-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GENDS1TEST-MIB::adGenDS1TestPatternTable' 
This table supports DS1 Test Pattern parameters.
adGenDS1TestPatternEntry row .1.3.6.1.4.1.664.5.78.1.4.1.1
An entry in the adGenDS1TestPatternTable.
Indexes
Column Syntax OID
adGenDS1TestPatternType
This object selects the DS1 BERT that will be generated and detected upon
recognition of a start command.
Note: notUsed# should not be selected!
Enumerationr/w
Enumerated Values:
1notUsed1
2qrss
3notUsed3
4allOnes
5allZeros
6notUsed6
7notUsed7
8notUsed8
9notUsed9
10oneInEight
11twoInEight
12threeInTwentyFour
 .1.3.6.1.4.1.664.5.78.1.4.1.1.1
adGenDS1TestPatternSync
true = pattern test is in progress and incoming test pattern is in sync;
pattern test ended while incoming test pattern was in sync.
false = pattern test is in progress and incoming test pattern is out of sync;
pattern…
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.664.5.78.1.4.1.1.2
adGenDS1TestPatternErrorsRcvd
0 = initialization value when pattern test starts.
>0 = increments for each logic error that occurs when pattern test is in
progress AND while incoming test pattern is in sync;
maintains value when pattern te…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.78.1.4.1.1.3
adGenDS1TestPatternInsertError
- Upon each reception of this object, 1 logic error is injected into DS1 payload
if a pattern test is in progress.
- The logic error is injected PRIOR to parity calculation.
Enumerationr/w
Enumerated Values:
1insert
 .1.3.6.1.4.1.664.5.78.1.4.1.1.4
adGenDS1TestPatternResetCount
- Upon each reception of this object, the pattern error counter is reset to 0 if a
far end pattern test is in progress.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.78.1.4.1.1.5