ADTRAN-GEN-SELTDELT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
10

adGenSeltDeltTable

table
.1.3.6.1.4.1.664.5.73.1.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenSeltDeltTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-SELTDELT-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-SELTDELT-MIB::adGenSeltDeltTable' 
This table contains information on the XDSL generic
SELT / DELT feature. Each entry reflects a required
 parameter or action required to perform either the SELT
 or DELT diagnostic test.
adGenSeltDeltEntry row .1.3.6.1.4.1.664.5.73.1.1.1.1
This table contains information on the SELT / DELT feature.
The entries are used for SELT / DELT support and operation.
Indexes
Column Syntax OID
adGenSeltDeltTestPortNumber
Selected port number for test operation.
The valid range is 0 up to the number of
ports on the card. This is functionally
equivalent to the port number of the
selected interface.

Note: adGenSeltDeltTestR…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.664.5.73.1.1.1.1.1
adGenSeltDeltTestFilename
Name of the file to be transmitted via TFTP
containing all of the test data for the selected
interface.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.73.1.1.1.1.2
adGenSeltDeltStartSELTTest
Used to initiate the SELT test for the xDSL port. When
the SELT test has completed the data file can be transferred
to a server via TFTP using adGenSeltDeltRetrieveData.
The TFTP address of the server will be specified…
Enumerationr/w
Enumerated Values:
1start
 .1.3.6.1.4.1.664.5.73.1.1.1.1.3
adGenSeltDeltStartDELTTest
Used to initiate the DELT test for the xDSL port. When
the DELT test has completed the data file can be transferred
to a server via TFTP using adGenSeltDeltRetrieveData.
The TFTP address of the server will be specified…
Enumerationr/w
Enumerated Values:
1start
 .1.3.6.1.4.1.664.5.73.1.1.1.1.4
adGenSeltDeltStopTest
Used to terminate the currently active test.
A get is meaningless and will always return stop(1).
Enumerationr/w
Enumerated Values:
1stop
 .1.3.6.1.4.1.664.5.73.1.1.1.1.5
adGenSeltDeltCurrentTestStatus
Status of the currently active SELT or DELT test.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.73.1.1.1.1.6
adGenSeltDeltLastTestStatus
Status of the last attempted SELT or DELT test.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.664.5.73.1.1.1.1.7
adGenSeltDeltRetrieveData
Used to begin the transfer of the diagnostic data
to a remote server for evaluation.
A get is meaningless and always returns beginTransfer(1).
Enumerationr/w
Enumerated Values:
1beginTransfer
 .1.3.6.1.4.1.664.5.73.1.1.1.1.8
adGenSeltDeltEnumTestStatus
Used to display the state of the current test in an
enumerated format.
The descriptions of the values are:
idle(1) - Signifies the unit can accept an activation
command. This response will …
Enumeration
Enumerated Values:
1idle
2active
3collectingData
4dataAvailable
5testFailed
 .1.3.6.1.4.1.664.5.73.1.1.1.1.9
adGenSeltDeltTestRemoteDevice
The remote device index selected for test operation.

NOTE: adGenSeltDeltTestPortNumber should
be set to 0 prior to provisioning of this
remote device indexing
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.664.5.73.1.1.1.1.10