ADTRAN-GEN-DSL-PROXY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
19
.1.3.6.1.4.1.664.5.59.4.1.1 · 1 row entry · 12 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenDslProxyCommandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-DSL-PROXY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-DSL-PROXY-MIB::adGenDslProxyCommandTable'
This table controls intitiating DSL proxy commands and
determining the status of those commands.
adGenDslProxyCommandEntry row .1.3.6.1.4.1.664.5.59.4.1.1.1
An entry in the adGenDslProxyCommandTable. Each entry
is indexed by the ifIndex of the T1 interface to which
the remote HDSL span is attached.
Indexes
Column Syntax OID
Discover whether an Adtran HDSLx LTU is at the other end of
the T1 line, and if so report information about the span.
AdGenDslProxyInitiater/w
Type Values:
1initiate
.1.3.6.1.4.1.664.5.59.4.1.1.1.1
Status of Retrieve System Type command. When the results
are available, they may be retrieved from adGenDslProxySystemTable.
AdGenDslProxyStatus
Type Values:
1neverActivated
2inProgress
3resultsValid
4error
.1.3.6.1.4.1.664.5.59.4.1.1.1.2
Timestamp of last valid results for Retrieve System Type command.
AdGenDslProxyLastTime .1.3.6.1.4.1.664.5.59.4.1.1.1.3
Retrieve the loopback status of all units in the span.
AdGenDslProxyInitiater/w
Type Values:
1initiate
.1.3.6.1.4.1.664.5.59.4.1.1.1.4
Status of Retrieve Loopback Status command. When the results
are available, they may be retrieved from adGenDslProxyLoopbackTable.
AdGenDslProxyStatus
Type Values:
1neverActivated
2inProgress
3resultsValid
4error
.1.3.6.1.4.1.664.5.59.4.1.1.1.5
Timestamp of last valid results for Retrieve Loopback Status command.
AdGenDslProxyLastTime .1.3.6.1.4.1.664.5.59.4.1.1.1.6
Retrieve splice detection data from all units in the span.
AdGenDslProxyInitiater/w
Type Values:
1initiate
.1.3.6.1.4.1.664.5.59.4.1.1.1.7
Status of Retrieve Splice Detection command. When the results
are available, they may be retrieved from adEShdslSpliceDetectionTable.
AdGenDslProxyStatus
Type Values:
1neverActivated
2inProgress
3resultsValid
4error
.1.3.6.1.4.1.664.5.59.4.1.1.1.8
Timestamp of last valid results for Retrieve Splice Detection command.
AdGenDslProxyLastTime .1.3.6.1.4.1.664.5.59.4.1.1.1.9
Activate Frame Ground Detection Test on the remote LTU and
retrieve results.
AdGenDslProxyInitiater/w
Type Values:
1initiate
.1.3.6.1.4.1.664.5.59.4.1.1.1.10
Status of Frame Ground Detection command. When the results
are available, they may be retrieved from adGenDslProxyFrameGroundTable.
AdGenDslProxyStatus
Type Values:
1neverActivated
2inProgress
3resultsValid
4error
.1.3.6.1.4.1.664.5.59.4.1.1.1.11
Timestamp of last valid results for Frame Ground Detection command.
AdGenDslProxyLastTime .1.3.6.1.4.1.664.5.59.4.1.1.1.12
.1.3.6.1.4.1.664.5.59.4.2.1 · 1 row entry · 4 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenDslProxySystemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-DSL-PROXY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-DSL-PROXY-MIB::adGenDslProxySystemTable'
This table indicates the type of HDSL system detected
at the other end of the T1 line.
          
Entries in this table represent the most recent information
acquired for this T1 interface.  It is updated on demand by
adGenDslProxySystemTypeInitiate.  It may also be updated when
other commands are requested.
adGenDslProxySystemEntry row .1.3.6.1.4.1.664.5.59.4.2.1.1
An entry in the adGenDslProxySystemTable. Each entry
is indexed by the ifIndex of the T1 interface to which
the remote HDSL span is attached.
Indexes
Column Syntax OID
Indicates whether a valid support-capable HDSL LTU was
detected, based on the last time this system was discovered.
Enumeration
Enumerated Values:
1unknown
2valid
3invalid
.1.3.6.1.4.1.664.5.59.4.2.1.1.1
If the system is invalid, provides the best available
reason discovery failed.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.664.5.59.4.2.1.1.2
Basic type of the detected HDSL system.
Enumeration
Enumerated Values:
1twoWire
2fourWire
.1.3.6.1.4.1.664.5.59.4.2.1.1.3
Number of repeaters in the HDSL span.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.664.5.59.4.2.1.1.4
.1.3.6.1.4.1.664.5.59.4.2.2 · 1 row entry · 2 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenDslProxyLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-DSL-PROXY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-DSL-PROXY-MIB::adGenDslProxyLoopbackTable'
This table can be used to manage loopbacks on the units.
in the HDSL span.
          
Entries in this table are dynamically populated based on
system information discoverd from the remote LTU.  To
populate rows in this table for an HDSL span, use
adGenDslProxySystemTypeInitiate.  To update the information
in this table use adGenDslProxyLoopbackStatusInitiate.
adGenDslProxyLoopbackEntry row .1.3.6.1.4.1.664.5.59.4.2.2.1
An entry in the adGenDslProxyLoopbackTable. Each entry
is indexed by the ifIndex of the T1 interface to which
the remote HDSL span is attached and the unit in the span.
Column Syntax OID
Initiate or clear a loopback on a unit in the span. The
directon of the loopback is indicated - network-facing,
customer-facing, or both. This OID is effectively
write-only. A GET on this OID has no meaning. To
dete…
Enumerationr/w
Enumerated Values:
1none
2network
3customer
4bilateral
.1.3.6.1.4.1.664.5.59.4.2.2.1.1
The current state of loopbacks on the unit. This
value is refreshed using adGenDslProxyLoopbackStatusInitiate.
Enumeration
Enumerated Values:
1none
2network
3customer
4bilateral
.1.3.6.1.4.1.664.5.59.4.2.2.1.2
.1.3.6.1.4.1.664.5.59.4.2.3 · 1 row entry · 1 columns
Uses the adtran variant from /opt/observium/mibs/adtran.
Command help
Walk adGenDslProxyFrameGroundTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-GEN-DSL-PROXY-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-GEN-DSL-PROXY-MIB::adGenDslProxyFrameGroundTable'
This table can be used to determine the results of a
Frame Ground Detection test on the remote LTU.
          
Entries in this table are dynamically populated based on
system information discoverd from the remote LTU.  To
populate rows in this table for an HDSL span, use
adGenDslProxySystemTypeInitiate.  To update the information
in this table use adGenDslProxyFrameGroundInitiate.
adGenDslProxyFrameGroundEntry row .1.3.6.1.4.1.664.5.59.4.2.3.1
An entry in the adGenDslProxyFrameGroundTable. Each entry
is indexed by the ifIndex of the T1 interface to which
the remote HDSL span is attached.
Indexes
Column Syntax OID
The result of the Frame Ground Detection test on the remote
LTU. This value is refreshed using
adGenDslProxyFrameGroundInitiate.
Enumeration
Enumerated Values:
1goodGround
2badGround
.1.3.6.1.4.1.664.5.59.4.2.3.1.1