ADTRAN-ETHERNET-DSLAM-FLOW-MIB Table View

This table specifies the parameters specific to a Interface.
A Interface can be a physical ethernet port, an EFM Bonding
group, an ATM VCL, a PON Gem port,
or other logical ethernet customer port. It
serves primarily as an attach point for
maps and filters.

adGenEthernetInterfaceEntry row .1.3.6.1.4.1.664.5.70.2.1.1

An entry in the adGenEthernetInterfaceTable.

Indexes

IF-MIBifIndex adGenEthernetInterfaceLogicalIndex

Column	Syntax	OID
adGenEthernetInterfaceLogicalIndex An implementation specific index defining a Logical Interface on a particular physical ifIndex. It is the same number as the subinterface in the CLI. For example, this index would be zero for ethernet ports, EFM bonding…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.1.1.1
adGenEthernetInterfaceMaxMACAddresses Specify the maximum number of MAC addresses for this Interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.1.1.2
adGenEthernetInterfaceFlowList A string of indices of flows applied to this Interface.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.1.1.3
adGenEthernetInterfaceSourceAuthentication If this is enabled then only authenticated flows will pass traffic for this Ethernet Interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.664.5.70.2.1.1.4
adGenEthernetInterfaceType Describes the interface type of ethernet interface	ADTRAN-SHARED-CND-SYSTEM-TC-MIBGenSystemInterfaceType Type Values: 1 unknown 2 ds1 3 dsx1 4 e1 5 dsxE1 6 gigabitEthernet 7 ds3 8 portChannel 9 tenGigabitEthernet 10 erps 11 shdsl 12 adsl 13 vdsl 14 efmGroup 15 efmLink 16 efmPort 17 lagGroup 18 pppGroup 19 imaGroup 20 imaLink 21 atm 22 fxs 23 hdsl2 24 hdsl4 25 adsl2 26 vdsl2 27 ethernet 28 fast 29 interleave 30 hdsl 31 gpon 32 ipHost 33 frpvc 34 sonet 35 otn 36 wan 37 defaultEthernet 38 genericBridge 39 fibreChannel 40 otnTenGigabitEthernet 41 hundredGigabitEthernet 42 otnHundredGigabitEthernet 43 xgigabitEthernet	.1.3.6.1.4.1.664.5.70.2.1.1.5
adGenEthernetInterfaceTypeSpecific This item returns a vector of interface type specific data byte# | Descr ATM - 0 | Upper 4 bits = 0, Lower 4 bits = Upper 4 bits of VPI 1 | Lower 8 bits of VPI 2 | Upper 8 bits of VCI 3 | Lower 8 bits of…	OctetString	.1.3.6.1.4.1.664.5.70.2.1.1.6

This table consists of the mapping from a user ethernet interface
into an S-Tag or S-Tag/C-Tag.

adGenEthernetDslamFlowEntry row .1.3.6.1.4.1.664.5.70.2.2.1

An entry in the adGenEthernetDslamFlowTable. Each entry is an
entry in a list of maps that can be applied to a user
port.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowIndex

Column	Syntax	OID
adGenEthernetDslamFlowIndex Index that specifies an individual map.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.1
adGenEthernetDslamFlowName This object is provided so that the user can identify the ethernet flow uniquely. The profile will be stored in the EMS by name and applied to the user-specified flows. This profile name is NOT intended to be used in th…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.2.1.2
adGenEthernetDslamFlowTrafficDirection Specify the traffic direction to which this map applies. Upstream: Customer C-Tag, Pbit, Ethertype, DSCP, and IP Protocol are used to classify traffic upstream. The Upstream Pbit Mode specifies how PBits are…	Enumerationr/w Enumerated Values: 1 upstream 2 downstream 3 bidirectional	.1.3.6.1.4.1.664.5.70.2.2.1.3
adGenEthernetDslamFlowNetworkSTag Specify the STag seen on network traffic.	Integer32r/w Constraints: range: 2-4094	.1.3.6.1.4.1.664.5.70.2.2.1.4
adGenEthernetDslamFlowNetworkCTag Specify the CTag seen on network ingress/egress traffic. A value of 4095 indicates that no Network CTag is used. A value of 4096 indicates that that the Network CTag should match the CEVlan in the upstream direction an…	Integer32r/w Constraints: range: 2-4096	.1.3.6.1.4.1.664.5.70.2.2.1.5
adGenEthernetDslamFlowCEVlan Specify the CEVlan seen on customer ingress/egress traffic. A value of 4095 indicates that no CEVlan is present. A value of 4097 indicates that customer traffic can be tagged or untagged. A value of 4098 indicates that…	Integer32r/w Constraints: range: 0-4098	.1.3.6.1.4.1.664.5.70.2.2.1.6
adGenEthernetDslamFlowDownstreamForwardingMode Specify how ethernet frames on this flow are forwarded through the switch. This value is bitmasked so that forwarding modes can be combined. src (0x1) - Use the network port as the source for forwarding flow (0x2) - Use…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.7
adGenEthernetDslamFlowDownstreamPbitMethod Specify the PBit mapping mode in from the network to customer. Inherit - downstream traffic should egress the Interface with the priority from the network. Marked - downstream traffic should always egress the I…	Enumerationr/w Enumerated Values: 1 inherit 2 marked 3 mapped	.1.3.6.1.4.1.664.5.70.2.2.1.8
adGenEthernetDslamFlowDownstreamPbitMarking If the network Pbit mode is marked then this variable specifies the downstream pBit.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.2.2.1.9
adGenEthernetDslamFlowDownstreamPbitMapping If the network Pbit mode is mapped then this variable specifies the ingress/egress priority mapping index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.10
adGenEthernetDslamFlowNetworkIngressPbit This option is a bitmask used to specify a list of allowable P-bit values of the S-Tag ingressing from the network. A value of 255 indicates that this value is not used to classify network ingress traffic.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.664.5.70.2.2.1.11
adGenEthernetDslamFlowNetworkIngressEtherType Specify the EtherType value that will be used to classify NetworkIngress traffic. A value of 0x0000 indicates this filter is disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.12
adGenEthernetDslamFlowNetworkIngressDSCP Specify a single DSCP value that will be used to classify NetworkIngress traffic. A value of 64 indicates this filter is disabled. If multiple DSCP values should be specified, use adGenEthernetDslamFlowNetworkIngressDS…	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.664.5.70.2.2.1.13
adGenEthernetDslamFlowNetworkIngressIPProtocolID Specify the IP Protocol ID that will be used to classify NetworkIngress traffic. A value of 0x0000 indicates this filter is disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.14
adGenEthernetDslamFlowUpstreamForwardingMode Specify how ethernet frames on this flow are forwarded through the switch. This value is bitmasked so that forwarding modes can be combined. src (0x1) - Use the ethernet interface as the source for forwarding flow (0x2)…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.15
adGenEthernetDslamFlowUpstreamSTagPbitMethod Specify the PBit mapping mode in from the Customer to Network STag. Inherit - upstream STags should egress with the priority from the customer. Marked - upstream STags should always egress with the specified prior…	Enumerationr/w Enumerated Values: 1 inherit 2 marked 3 mapped	.1.3.6.1.4.1.664.5.70.2.2.1.16
adGenEthernetDslamFlowUpstreamSTagPbitMarking If the Customer Pbit mode is marked then this variable specifies the upstream STag pBit.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.2.2.1.17
adGenEthernetDslamFlowUpstreamSTagPbitMapping If the Customer Pbit mode is mapped then this variable specifies the ingress/egress STag priority mapping index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.18
adGenEthernetDslamFlowUpstreamCTagPbitMethod Specify the CTag PBit mapping mode in from the Customer to Network. Inherit - upstream traffic should egress with the priority from the customer. Marked - upstream traffic should always egress with the specified p…	Enumerationr/w Enumerated Values: 1 inherit 2 marked 3 mapped	.1.3.6.1.4.1.664.5.70.2.2.1.19
adGenEthernetDslamFlowUpstreamCTagPbitMarking If the Customer Pbit mode is marked then this variable specifies the upstream CTag pBit.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.2.2.1.20
adGenEthernetDslamFlowUpstreamCTagPbitMapping If the Customer Pbit mode is mapped then this variable specifies the ingress/egress CTag priority mapping index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.21
adGenEthernetDslamFlowCustomerIngressPbit This option is a bitmask used to specify a list of allowable P-bit values of the CEVlan ingressing from the customer. A value of 255 indicates that this value is not used to classify customer ingress traffic.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.664.5.70.2.2.1.22
adGenEthernetDslamFlowCustomerIngressEtherType Specify the EtherType value that will be used to classify CustomerIngress traffic. A value of 0x0000 indicates this filter is disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.23
adGenEthernetDslamFlowCustomerIngressDSCP Specify a single DSCP value that will be used to classify CustomerIngress traffic. A value of 64 indicates this filter is disabled. If multiple DSCP values should be specified, use adGenEthernetDslamFlowCustomerIngress…	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.664.5.70.2.2.1.24
adGenEthernetDslamFlowCustomerIngressIPProtocolID Specify the IP Protocol ID that will be used to classify CustomerIngress traffic. A value of 0x0000 indicates this filter is disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.25
adGenEthernetDslamFlowCustomerIngressBroadcast This variable specifies whether or not to drop CustomerIngress broadcasts on this map.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.26
adGenEthernetDslamFlowCustomerIngressMulticast This variable specifies whether or not to drop CustomerIngress multicasts on this map.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.27
adGenEthernetDslamFlowCustomerIngressUnicast This variable specifies whether or not to drop CustomerIngress unicasts on this map.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.28
adGenEthernetDslamFlowCustomerIngressPolicer Indicate which policer to on customer ingress traffic. A value of 0 means no policer is used on customer ingress traffic. A non-zero value represents a row from the adGenEthernetDslamFlowProfilesTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.29
adGenEthernetDslamFlowEncapsMode Encapsulation mode/type if applicable; 'notApplicable' otherwise. IPoE and PPPoE specify a particular protocol over ethernet. 'Ethernet' specifies that any protocol over ethernet is applicable including IP and PPP.	Enumerationr/w Enumerated Values: 1 ipoe 2 pppoe 3 pppoa 4 notApplicable 5 atmoe 6 pppoaVcMux 7 autoDetect 8 ethernet	.1.3.6.1.4.1.664.5.70.2.2.1.30
adGenEthernetDslamFlowManualAddrAging Manual Address Aging in minutes for unicast MACs.	Integer32r/w Constraints: range: 1-1440	.1.3.6.1.4.1.664.5.70.2.2.1.31
adGenEthernetDslamFlowIntermedAgent Enable/disable Intermediate Agent if applicable; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.32
adGenEthernetDslamFlowDhcpRelay Set the DHCPv4 processing mode: Enabled(1)- Use DHCPv4 for subscriber authentication Disabled(2)- Discard DHCPv4 Not Applicable(3)- Unused Transparent(4)- Ignore DHCPv4 Snoop(5)- Process DHCPv4 without pe…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable 4 transparent 5 snoop	.1.3.6.1.4.1.664.5.70.2.2.1.33
adGenEthernetDslamFlowOption82Insert Enable/disable Option 82 Insertion if applicable; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.34
adGenEthernetDslamFlowLearnedIpAddrAgingMethod Method for Learned IP Address Aging if applicable; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 lease 2 fixed 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.35
adGenEthernetDslamFlowIgmpProcessing Method for IGMP Processing if applicable; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 block 2 forward 3 snooping 4 proxy 5 notApplicable 6 transparent 7 forking	.1.3.6.1.4.1.664.5.70.2.2.1.36
adGenEthernetDslamFlowIgmpVersion IGMP Version if applicable: v3 implies v1, v2, and v3; v2 implies v1 and v2; v1 is v1 only; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 v1 2 v2 3 v3 4 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.37
adGenEthernetDslamFlowLastMemberQueryInterval Last Member Query Interval in milliseconds. This is the amount of time between Queries. Low value results in faster detection of missed leaves.	Integer32r/w Constraints: range: 100-65535	.1.3.6.1.4.1.664.5.70.2.2.1.38
adGenEthernetDslamFlowLastMemberQueryCount Last Member Query Count. This is the number of queries before declaring no membership of a group (channel).	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.664.5.70.2.2.1.39
adGenEthernetDslamFlowImmediateLeave Enable/disable Immediate Leave if applicable; 'notApplicable' otherwise. Disable is the equivalent of setting Last Member Query Count to 0.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.40
adGenEthernetDslamFlowMaxAllowedMcastGroups Maximum Allowed Non-Guaranteed Multicast Groups. This value is only considered if multicast groups are enabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.41
adGenEthernetDslamFlowDhcpPPPoERemoteId Enable/disable Remote ID insertion into DHCPv4 Option 82 or DHCPv6 relay agent in option 37 or PPPoE Vendor Specific tag if applicable.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.42
adGenEthernetDslamFlowDhcpPPPoELoopCharacteristics Enable/disable loop characteristics insertion into DHCPv4 Option 82 or DHCPv6 relay agent option 17 (vendor specific) loop characteristics or PPPoE Vendor Specific tag if applicable.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.2.1.43
adGenEthernetDslamFlowDhcpPPPoECircuitIdFormat Used to provision the format of the circuit ID string. This string is returned by the PPPoE intermediate agent and DHCP relay agent in v4 sub option 1 or in v6 option 18. TR-101 states that the format of the circuit ID …	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.664.5.70.2.2.1.44
adGenEthernetDslamFlowPPPoASessionTimeout Used to set the PPPoA Session timeout when the mapping is provisioned for PPPoA encapsulation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.45
adGenEthernetDslamFlowInterfaceIfIndex Specifies the IfIndex of the Interface this mapping is tied to. If the value is 0 then this map is not applied to a Interface. This value must be nonzero before the flow can be activated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.46
adGenEthernetDslamFlowInterfaceLogicalIndex Specifies the logical indes within the ifIndex of the ethernet interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.47
adGenEthernetDslamFlowLastErrorString Returns the reason for the last error.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.2.1.48
adGenEthernetDslamFlowRowStatus This object is used to create a new row or modify or delete an existing map in this table. A row cannot be set to active until the ethernet interface ifIndex is set.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.2.2.1.49
adGenEthernetDslamFlowNetworkIngressPolicer Indicate which policer to on network ingress traffic. A value of 0 means no policer is used on network ingress traffic. A non-zero value represents a row from the adGenEthernetDslamFlowProfilesTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.50
adGenEthernetDslamFlowUpstreamDiscard Indicate that any packets matching the upstream criteria will be discarded.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.664.5.70.2.2.1.51
adGenEthernetDslamFlowMaxAllowedMulticastBandwidth Specify the maximum downstream bandwidth(kbps) available for this flow. This value is only considered if multicast bandwidth is enabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.53
adGenEthernetDslamFlowMaxAllowedMulticastBandwidthEnable When enabled joins for multicast streams by the subscriber are checked to make sure that the maximum multicast bandwidth will not be exceeded by the join.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.664.5.70.2.2.1.54
adGenEthernetDslamFlowProfileName This object is provided so that the user can describe a particular flow by any means desired. This is not related to policers in the adGenEthernetDslamFlowProfilesTable.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.2.1.55
adGenEthernetDslamFlowMaxAllowedMcastGroupsEnable When enabled joins for multicast streams by the subscriber are checked to make sure that the maximum number of non-guarenteed multicast groups will not be exceeded by the join.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.664.5.70.2.2.1.56
adGenEthernetDslamFlowNetworkIngressDSCPList This object is a string used to specify the DSCP values that will be used to classify NetworkIngress traffic. The DSCP values can be specified using both list and range notation. For example, to specify DSCP values 27…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.2.1.57
adGenEthernetDslamFlowCustomerIngressDSCPList This object is a string used to specify the DSCP values that will be used to classify CustomerIngress traffic. The DSCP values can be specified using both list and range notation. For example, to specify DSCP values 2…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.2.1.58
adGenEthernetDslamFlowIgmpRouterIP The source IP address that the DSLAM places in IGMP messages destined for the subscriber. This value only applies when IGMP is in proxy mode.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.664.5.70.2.2.1.59
adGenEthernetDslamFlowActivationStatus Provides an indication of whether the flow is actually activated. If adGenEthernetDslamFlowRowStatus is not active, this object will return notActivated. When rowStatus is successfully set to active, the flow begins at…	Enumeration Enumerated Values: 1 notActivated 2 inProgress 3 active 4 error	.1.3.6.1.4.1.664.5.70.2.2.1.60
adGenEthernetDslamFlowARPProcessing Set the ARP processing mode.	Enumerationr/w Enumerated Values: 1 block 2 proxy 3 transparent	.1.3.6.1.4.1.664.5.70.2.2.1.61
adGenEthernetDslamFlowPPPoEProcessing Set the PPPoE processing mode.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable 4 transparent	.1.3.6.1.4.1.664.5.70.2.2.1.62
adGenEthernetDslamFlowSubscriberIpRowCreateError Returns the reason for the last row create error on Subscriber Access Static IP Table.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.2.1.63
adGenEthernetDslamFlowDhcpPPPoEVendorNumber Used to provision the IANA Enterprise Number. This Number is returned by the PPPoE intermediate agent and DHCPv4 relay agent in sub option 9.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.2.1.64
adGenEthernetDslamFlowDhcpPPPoEVendorIdFormat Used to provision the format of the vendor ID string. This string is returned by the PPPoE intermediate agent and DHCPv4 relay agent in sub option 9. TR-101 states that the format of the vendor ID should be user definea…	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.664.5.70.2.2.1.65
adGenEthernetDslamFlowEvcName Set the name of the EVC that this flow is connected to. When this object is set, other objects that relate to EVC parameters (e.g. network S-tag, MAC switching, etc.) will be changed to match the named EVC parameters.	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.664.5.70.2.2.1.66
adGenEthernetDslamFlowEvcRoot Indicates whether the mapped interface is connected to the EVC as a root or a leaf. Root interfaces may forward to leaves and other roots; leaf interfaces may only forard to roots. When enabled, the mapped interface i…	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.664.5.70.2.2.1.67
adGenEthernetDslamFlowDhcpv6Mode Set the DHCPv6 processing mode: authenticate(1)- Use DHCPv6 for subscriber authentication block(2)- Discard DHCPv6 transparent(3)- Ignore DHCPv6 snoop(4)- Process DHCPv6 without performing authentication …	Enumerationr/w Enumerated Values: 1 authenticate 2 block 3 transparent 4 snoop 5 sameAsDhcpv4	.1.3.6.1.4.1.664.5.70.2.2.1.68
adGenEthernetDslamFlowDhcpv6RelayAgent Set the DHCPv6 Relay Agent Mode: enabled(1) - enable the relay agent disabled(2) - disable the relay agent sameAsDhcpv4(3) - use the same mode on DHCPv6 Relay Agent as what is provisioned on adGenEthernetDslamFlowOption…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 sameAsDhcpv4	.1.3.6.1.4.1.664.5.70.2.2.1.69
adGenEthernetDslamFlowDhcpv6RelayAgentTrusted Enable/disable DHCPv6 relay agent trusted mode.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.664.5.70.2.2.1.70
adGenEthernetDslamFlowDhcpPPPoERemoteIdFormat Used to provision the format of the remote ID string. This string is returned by the DHCPv4 relay agent in option 82 or DHCPv6 relay agent in option 37 or in PPPoE Vendor Specific tag. TR-101 states that the format of t…	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.664.5.70.2.2.1.71
adGenEthernetDslamFlowDownstreamQosMapProfile The attached QoS Map Profile from the adGenQosMapProfileProvisioningTable used to classify downstream traffic into egress queues. An empty string signifies that the default system cos-map will be used instead of a cust…	OctetStringr/w Constraints: range: 1-80	.1.3.6.1.4.1.664.5.70.2.2.1.72
adGenEthernetDslamFlowUpstreamChannel This OID specifies the upstream channel connected to this evc-map. Setting the channel to 0 selects the system default channel. When the evc-map is connected to an UNI interface the user can specify a channel number in …	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.664.5.70.2.2.1.73
adGenEthernetDslamFlowDhcpv6CurrMode View the current DHCPv6 processing mode: Authenticate(1)- Use DHCPv6 for subscriber authentication Block(2)- Discard DHCPv6 Transparent(3)- Ignore DHCPv6 Snoop(4)- Process DHCPv6 without performing authen…	Enumeration Enumerated Values: 1 authenticate 2 block 3 transparent 4 snoop	.1.3.6.1.4.1.664.5.70.2.2.1.74
adGenEthernetDslamFlowDhcpPPPoEVendorIdInsert Enable/disable Vendor ID information insertion into DHCPv4 Option 82 or DHCPv6 relay agent. Enabling this feature will insert the adGenEthernetDslamFlowDhcpPPPoEVendorNumber and adGenEthernetDslamFlowDhcpPPPoEVendorIdFo…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.664.5.70.2.2.1.75
adGenEthernetDslamFlowMatchSourceMacList Contains a list of source MAC addresses and mask on which to match in the following format: Byte number(s) Description 1 Number of match source MAC address entries (N, 0 to M, …	OctetStringr/w	.1.3.6.1.4.1.664.5.70.2.2.1.76
adGenEthernetDslamFlowMatchSourceMacLastErrorString Returns the reason for the last error when setting adGenEthernetDslamFlowMatchSourceMacList or adGenEthernetDslamFlowRev2MatchSourceLastErrorString.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.2.1.77
adGenEthernetDslamFlowMatchNonIp Enables/disables matching non-IP customer ingress traffic. True - enables match non-IP. False - disables match non-IP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.664.5.70.2.2.1.78

This table is a read only table that has one row per slot. It returns the
next available ethernet dslam flow index to be uses as the index for the
EthernetDslamFlow table.

adGenEthernetDslamFlowIndexNextEntry row .1.3.6.1.4.1.664.5.70.2.3.1

An entry in the adGenEthernetDslamFlowIndexNextTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetDslamFlowIndexNext This variable returns the next available Ethernet Flow Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.3.1.1

The Profile (i.e. Policer) provisioning table. Policers can be
created and applied to multiple maps or Interfaces. If a policer
is applied to a Interface then all maps applied to that Interface
follow the Interface's policer.

adGenEthernetDslamFlowProfilesEntry row .1.3.6.1.4.1.664.5.70.2.4.1

An entry in the Policer provisioning table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowProfileIndex

Column	Syntax	OID
adGenEthernetDslamFlowProfileIndex This variable is used as an index into the Policer table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.4.1.1
adGenEthernetDslamFlowProfileAlias A user configurable alias for the Policer. Upon creation of the Policer, the associated alias will default to a unique value.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.4.1.2
adGenEthernetDslamFlowProfileCIR This variable is used to configure the CIR (in kbps).	Integer32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.664.5.70.2.4.1.3
adGenEthernetDslamFlowProfileCBS This variable is used to configure the CBS (in bytes).	Integer32r/w Constraints: range: 0-999999	.1.3.6.1.4.1.664.5.70.2.4.1.4
adGenEthernetDslamFlowProfileEIR This variable is used to configure the EIR (in kbps). A null string is used to configure the EIR for no limit. The maximum CIR value is 100000.	Integer32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.664.5.70.2.4.1.5
adGenEthernetDslamFlowProfileEBS This variable is used to configure the EBS (in bytes).	Integer32r/w Constraints: range: 0-999999	.1.3.6.1.4.1.664.5.70.2.4.1.6
adGenEthernetDslamFlowProfileLastErrorString Returns the reason for the last error.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.4.1.7
adGenEthernetDslamFlowProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.2.4.1.8
adGenEthernetDslamFlowProfileActualCIR This variable shows the actual CIR (in kbps). Policer attributes are set to the closest possible value in hardware based on platform speed, which means the configured CIR may not be the same as the actual CIR.	Integer32 Constraints: range: 0-100000	.1.3.6.1.4.1.664.5.70.2.4.1.9
adGenEthernetDslamFlowProfileActualCBS This variable shows the actual CBS (in bytes). Policer attributes are set to the closest possible value in hardware based on platform speed, which means the configured CBS may not be the same as the actual CBS.	Integer32 Constraints: range: 0-999999	.1.3.6.1.4.1.664.5.70.2.4.1.10
adGenEthernetDslamFlowProfileActualEIR This variable shows the actual EIR (in kbps). Policer attributes are set to the closest possible value in hardware based on platform speed, which means the configured EIR may not be the same as the actual EIR.	Integer32 Constraints: range: 0-100000	.1.3.6.1.4.1.664.5.70.2.4.1.11
adGenEthernetDslamFlowProfileActualEBS This variable shows the actual EBS (in bytes). Policer attributes are set to the closest possible value in hardware based on platform speed, which means the configured EBS may not be the same as the actual EBS.	Integer32 Constraints: range: 0-999999	.1.3.6.1.4.1.664.5.70.2.4.1.12

This read-only table allows a lookup from the flow's name and the
flow's index.

adGenEthernetDslamFlowNameLookupEntry row .1.3.6.1.4.1.664.5.70.2.5.1

An entry in the Profile provisioning table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowNameLookupName

Column	Syntax	OID
adGenEthernetDslamFlowNameLookupName Specifies the name of the flow.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.5.1.1
adGenEthernetDslamFlowNameLookupIndex Specifies the index of the flow given the name.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.5.1.2

Defines egress shapers applied to ethernet interfaces.

adGenEthernetDslamFlowShaperEntry row .1.3.6.1.4.1.664.5.70.2.6.1

A shaper indexed by ethernet interface and the set of priorities on that
ethernet interface to which it applies.

Indexes

IF-MIBifIndex adGenEthernetDslamFlowShaperInterfaceLogicalIndex adGenEthernetDslamFlowShaperPrioritySet

Column	Syntax	OID
adGenEthernetDslamFlowShaperInterfaceLogicalIndex The logical interface index of the ethernet interface to which this shaper applies	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.6.1.1
adGenEthernetDslamFlowShaperPrioritySet A bit-mask of priorities to which this shaper applies. Bit 0 indicates queue 0.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.6.1.2
adGenEthernetDslamFlowShaperRate The peak information rate in kbps of this shaper. Note that for a very short time the units were specified as bps. This was only implemented by a VDSL device, and will be corrected. It was quickly realized that kbps wou…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.6.1.3
adGenEthernetDslamFlowShaperRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.2.6.1.4
adGenEthernetDslamFlowShaperLastErrorString Returns the reason for the last error.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.6.1.5
adGenEthernetDslamFlowShaperAlias A user configurable alias for the Shaper. Upon creation of the Shaper, the associated alias will default to a unique value.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.6.1.6
adGenEthernetDslamFlowShaperOperationalStatus Provides an indication if the shaper is actually running or not. Provides notRunning if the shaper cannot start shaping, provides Running if the shaper is shaping on an interface	Enumeration Enumerated Values: 1 shaperNotRunning 2 shaperRunning	.1.3.6.1.4.1.664.5.70.2.6.1.7
adGenEthernetDslamFlowShaperBurstSize The burst size in bytes, specified for per-port shapers.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.6.1.8
adGenEthernetDslamFlowShaperFixedRate The fixed rate in kbps of this shaper. This rate is guaranteed, and the interface will generate idle frames to transmit if the rate is not met. This means the bandwidth for fixed rates cannot be used by other sources.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.6.1.9
adGenEthernetDslamFlowShaperAssuredRate The assured rate in kbps of this shaper. This rate is guaranteed, but the interface will not generate idle frames if the rate is not met. This means the bandwidth for assured rates can be used by other sources if the …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.6.1.10
adGenEthernetDslamFlowShaperDownstreamMinRate The downstream min-rate in kbps of this shaper.	kbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.6.1.11

Defines list of subscriber static ip addresses attached on the flow.

adGenSubscriberAccessStaticIpEntry row .1.3.6.1.4.1.664.5.70.2.7.1

It is indexed by ip address and the flow to which it is attached.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowIndex adGenSubscriberAccessStaticIpAddress

Column	Syntax	OID
adGenSubscriberAccessStaticIpAddress The value of the subscriber static ip	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.664.5.70.2.7.1.1
adGenSubscriberAccessStaticIpMacAddress The subscriber mac address that is associated with this static ip entry.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.664.5.70.2.7.1.2
adGenSubscriberAccessStaticIpGatewayIp The subscriber gateway ip address that is associated with this static ip entry	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.664.5.70.2.7.1.3
adGenSubscriberAccessStaticIpGatewayMac The subscriber gateway mac address that is associated with this static ip entry.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.664.5.70.2.7.1.4
adGenSubscriberAccessStaticIpLastErrorString Returns the reason for the last error.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.7.1.5
adGenSubscriberAccessStaticIpRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.2.7.1.6

This table is a read only table that has one row per slot. It returns the
next available policer index to be used as the index for the
Policer table.

adGenEthernetDslamFlowProfilesIndexNextEntry row .1.3.6.1.4.1.664.5.70.2.8.1

An entry in the adGenEthernetDslamFlowProfilesIndexNextTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetDslamFlowProfilesIndexNext This variable returns the next available Policer Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.8.1.1

This read-only table allows a lookup from the policer's name and the
policer's index.

adGenEthernetDslamFlowProfilesLookupEntry row .1.3.6.1.4.1.664.5.70.2.9.1

An entry in the policer lookup table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowProfileLookupAlias

Column	Syntax	OID
adGenEthernetDslamFlowProfileLookupAlias Specifies the name of the policer.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.9.1.1
adGenEthernetDslamFlowProfileLookupIndex Specifies the index of the policer given the name.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.9.1.2

This read-only table allows a lookup from the shaper's name and the
shaper's index.

adGenEthernetDslamFlowShaperLookupEntry row .1.3.6.1.4.1.664.5.70.2.10.1

An entry in the shaper lookup table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowShaperLookupAlias

Column	Syntax	OID
adGenEthernetDslamFlowShaperLookupAlias Specifies the name of the shaper.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.10.1.1
adGenEthernetDslamFlowShaperLookupIfIndex Specifies the ifIndex of the shaper given the name	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.10.1.2
adGenEthernetDslamFlowShaperLookupInterfaceLogicalIndex Specifies the logical interface index of the ethernet interface to which this shaper applies given the name	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.10.1.3
adGenEthernetDslamFlowShaperLookupPrioritySet Given the shaper name, specifies a bit-mask of priorities to which this shaper applies. Bit 0 indicates queue 0.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.10.1.4

This table consists of the mapping from a user ethernet interface
into an S-Tag or S-Tag/C-Tag. This table returns all interfaces.

adGenEthernetDslamFlowRev2Entry row .1.3.6.1.4.1.664.5.70.2.11.1

An entry in the adGenEthernetDslamFlowRev2Table. Each entry is an
entry in a list of maps that can be applied to a user
port.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowRev2Index

Column	Syntax	OID
adGenEthernetDslamFlowRev2Index Index that specifies an individual map.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.1
adGenEthernetDslamFlowRev2Name This object is provided so that the user can identify the ethernet flow uniquely. The profile will be stored in the EMS by name and applied to the user-specified flows. This profile name is NOT intended to be used in th…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.11.1.2
adGenEthernetDslamFlowRev2TrafficDirection Specify the traffic direction to which this map applies. Upstream: Customer C-Tag, Pbit, Ethertype, DSCP, and IP Protocol are used to classify traffic upstream. The Upstream Pbit Mode specifies how PBits are…	Enumerationr/w Enumerated Values: 1 upstream 2 downstream 3 bidirectional	.1.3.6.1.4.1.664.5.70.2.11.1.3
adGenEthernetDslamFlowRev2NetworkSTag Specify the STag seen on network traffic.	Integer32r/w Constraints: range: 2-4094	.1.3.6.1.4.1.664.5.70.2.11.1.4
adGenEthernetDslamFlowRev2NetworkCTag Specify the CTag seen on network ingress/egress traffic. A value of 4095 indicates that no Network CTag is used. A value of 4096 indicates that that the Network CTag should match the CEVlan in the upstream direction an…	Integer32r/w Constraints: range: 2-4096	.1.3.6.1.4.1.664.5.70.2.11.1.5
adGenEthernetDslamFlowRev2CEVlan Specify the CEVlan seen on customer ingress/egress traffic. A value of 4095 indicates that no CEVlan is present. A value of 4097 indicates that customer traffic can be tagged or untagged. A value of 4098 indicates that…	Integer32r/w Constraints: range: 0-4097	.1.3.6.1.4.1.664.5.70.2.11.1.6
adGenEthernetDslamFlowRev2DownstreamForwardingMode Specify how ethernet frames on this flow are forwarded through the switch. This value is bitmasked so that forwarding modes can be combined. src (0x1) - Use the network port as the source for forwarding flow (0x2) - Use…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.7
adGenEthernetDslamFlowRev2DownstreamPbitMethod Specify the PBit mapping mode in from the network to customer. Inherit - downstream traffic should egress the Interface with the priority from the network. Marked - downstream traffic should always egress the I…	Enumerationr/w Enumerated Values: 1 inherit 2 marked 3 mapped	.1.3.6.1.4.1.664.5.70.2.11.1.8
adGenEthernetDslamFlowRev2DownstreamPbitMarking If the network Pbit mode is marked then this variable specifies the downstream pBit.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.2.11.1.9
adGenEthernetDslamFlowRev2DownstreamPbitMapping If the network Pbit mode is mapped then this variable specifies the ingress/egress priority mapping index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.10
adGenEthernetDslamFlowRev2NetworkIngressPbit This option is a bitmask used to specify a list of allowable P-bit values of the S-Tag ingressing from the network. A value of 255 indicates that this value is not used to classify network ingress traffic.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.664.5.70.2.11.1.11
adGenEthernetDslamFlowRev2NetworkIngressEtherType Specify the EtherType value that will be used to classify NetworkIngress traffic. A value of 0x0000 indicates this filter is disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.12
adGenEthernetDslamFlowRev2NetworkIngressDSCP Specify a single DSCP value that will be used to classify NetworkIngress traffic. A value of 64 indicates this filter is disabled. If multiple DSCP values should be specified, use adGenEthernetDslamFlowRev2NetworkIngre…	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.664.5.70.2.11.1.13
adGenEthernetDslamFlowRev2NetworkIngressIPProtocolID Specify the IP Protocol ID that will be used to classify NetworkIngress traffic. A value of 0x0000 indicates this filter is disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.14
adGenEthernetDslamFlowRev2UpstreamForwardingMode Specify how ethernet frames on this flow are forwarded through the switch. This value is bitmasked so that forwarding modes can be combined. src (0x1) - Use the ethernet interface as the source for forwarding flow (0x2)…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.15
adGenEthernetDslamFlowRev2UpstreamSTagPbitMethod Specify the PBit mapping mode in from the Customer to Network STag. Inherit - upstream STags should egress with the priority from the customer. Marked - upstream STags should always egress with the specified prior…	Enumerationr/w Enumerated Values: 1 inherit 2 marked 3 mapped	.1.3.6.1.4.1.664.5.70.2.11.1.16
adGenEthernetDslamFlowRev2UpstreamSTagPbitMarking If the Customer Pbit mode is marked then this variable specifies the upstream STag pBit.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.2.11.1.17
adGenEthernetDslamFlowRev2UpstreamSTagPbitMapping If the Customer Pbit mode is mapped then this variable specifies the ingress/egress STag priority mapping index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.18
adGenEthernetDslamFlowRev2UpstreamCTagPbitMethod Specify the CTag PBit mapping mode in from the Customer to Network. Inherit - upstream traffic should egress with the priority from the customer. Marked - upstream traffic should always egress with the specified p…	Enumerationr/w Enumerated Values: 1 inherit 2 marked 3 mapped	.1.3.6.1.4.1.664.5.70.2.11.1.19
adGenEthernetDslamFlowRev2UpstreamCTagPbitMarking If the Customer Pbit mode is marked then this variable specifies the upstream CTag pBit.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.2.11.1.20
adGenEthernetDslamFlowRev2UpstreamCTagPbitMapping If the Customer Pbit mode is mapped then this variable specifies the ingress/egress CTag priority mapping index.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.21
adGenEthernetDslamFlowRev2CustomerIngressPbit This option is a bitmask used to specify a list of allowable P-bit values of the CEVlan ingressing from the customer. A value of 255 indicates that this value is not used to classify customer ingress traffic.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.664.5.70.2.11.1.22
adGenEthernetDslamFlowRev2CustomerIngressEtherType Specify the EtherType value that will be used to classify CustomerIngress traffic. A value of 0x0000 indicates this filter is disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.23
adGenEthernetDslamFlowRev2CustomerIngressDSCP Specify a single DSCP value that will be used to classify CustomerIngress traffic. A value of 64 indicates this filter is disabled. If multiple DSCP values should be specified, use adGenEthernetDslamFlowRev2CustomerIng…	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.664.5.70.2.11.1.24
adGenEthernetDslamFlowRev2CustomerIngressIPProtocolID Specify the IP Protocol ID that will be used to classify CustomerIngress traffic. A value of 0x0000 indicates this filter is disabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.25
adGenEthernetDslamFlowRev2CustomerIngressBroadcast This variable specifies whether or not to drop CustomerIngress broadcasts on this map.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.26
adGenEthernetDslamFlowRev2CustomerIngressMulticast This variable specifies whether or not to drop CustomerIngress multicasts on this map.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.27
adGenEthernetDslamFlowRev2CustomerIngressUnicast This variable specifies whether or not to drop CustomerIngress unicasts on this map.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.28
adGenEthernetDslamFlowRev2CustomerIngressPolicer Indicate which policer to on customer ingress traffic. A value of 0 means no policer is used on customer ingress traffic. A non-zero value represents a row from the adGenEthernetDslamFlowRev2ProfilesTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.29
adGenEthernetDslamFlowRev2EncapsMode Encapsulation mode/type if applicable; 'notApplicable' otherwise. IPoE and PPPoE specify a particular protocol over ethernet. 'Ethernet' specifies that any protocol over ethernet is applicable including IP and PPP.	Enumerationr/w Enumerated Values: 1 ipoe 2 pppoe 3 pppoa 4 notApplicable 5 atmoe 6 pppoaVcMux 7 autoDetect 8 ethernet	.1.3.6.1.4.1.664.5.70.2.11.1.30
adGenEthernetDslamFlowRev2ManualAddrAging Manual Address Aging in minutes for unicast MACs.	Integer32r/w Constraints: range: 1-1440	.1.3.6.1.4.1.664.5.70.2.11.1.31
adGenEthernetDslamFlowRev2IntermedAgent Enable/disable Intermediate Agent if applicable; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.32
adGenEthernetDslamFlowRev2DhcpRelay Set the DHCPv4 processing mode: Enabled(1)- Use DHCPv4 for subscriber authentication Disabled(2)- Discard DHCPv4 Not Applicable(3)- Unused Transparent(4)- Ignore DHCPv4 Snoop(5)- Process DHCPv4 without pe…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable 4 transparent 5 snoop	.1.3.6.1.4.1.664.5.70.2.11.1.33
adGenEthernetDslamFlowRev2Option82Insert Enable/disable Option 82 Insertion if applicable; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.34
adGenEthernetDslamFlowRev2LearnedIpAddrAgingMethod Method for Learned IP Address Aging if applicable; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 lease 2 fixed 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.35
adGenEthernetDslamFlowRev2IgmpProcessing Method for IGMP Processing if applicable; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 block 2 forward 3 snooping 4 proxy 5 notApplicable 6 transparent 7 forking	.1.3.6.1.4.1.664.5.70.2.11.1.36
adGenEthernetDslamFlowRev2IgmpVersion IGMP Version if applicable: v3 implies v1, v2, and v3; v2 implies v1 and v2; v1 is v1 only; 'notApplicable' otherwise.	Enumerationr/w Enumerated Values: 1 v1 2 v2 3 v3 4 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.37
adGenEthernetDslamFlowRev2LastMemberQueryInterval Last Member Query Interval in milliseconds. This is the amount of time between Queries. Low value results in faster detection of missed leaves.	Integer32r/w Constraints: range: 100-65535	.1.3.6.1.4.1.664.5.70.2.11.1.38
adGenEthernetDslamFlowRev2LastMemberQueryCount Last Member Query Count. This is the number of queries before declaring no membership of a group (channel).	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.664.5.70.2.11.1.39
adGenEthernetDslamFlowRev2ImmediateLeave Enable/disable Immediate Leave if applicable; 'notApplicable' otherwise. Disable is the equivalent of setting Last Member Query Count to 0.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.40
adGenEthernetDslamFlowRev2MaxAllowedMcastGroups Maximum Allowed Non-Guaranteed Multicast Groups. This value is only considered if multicast groups are enabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.41
adGenEthernetDslamFlowRev2DhcpPPPoERemoteId Enable/disable Remote ID insertion into DHCPv4 Option 82 or DHCPv6 relay agent in option 37 or PPPoE Vendor Specific tag if applicable.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.42
adGenEthernetDslamFlowRev2DhcpPPPoELoopCharacteristics Enable/disable loop characteristics insertion into DHCPv4 Option 82 or DHCPv6 relay agent option 17 (vendor specific) loop characteristics or PPPoE Vendor Specific tag if applicable.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.664.5.70.2.11.1.43
adGenEthernetDslamFlowRev2DhcpPPPoECircuitIdFormat Used to provision the format of the circuit ID string. This string is returned by the PPPoE intermediate agent and DHCP relay agent in v4 sub option 1 or in v6 option 18. TR-101 states that the format of the circuit ID …	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.664.5.70.2.11.1.44
adGenEthernetDslamFlowRev2PPPoASessionTimeout Used to set the PPPoA Session timeout when the mapping is provisioned for PPPoA encapsulation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.45
adGenEthernetDslamFlowRev2InterfaceIfIndex Specifies the IfIndex of the Interface this mapping is tied to. If the value is 0 then this map is not applied to a Interface. This value must be nonzero before the flow can be activated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.46
adGenEthernetDslamFlowRev2InterfaceLogicalIndex Specifies the logical indes within the ifIndex of the ethernet interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.47
adGenEthernetDslamFlowRev2LastErrorString Returns the reason for the last error.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.11.1.48
adGenEthernetDslamFlowRev2RowStatus This object is used to create a new row or modify or delete an existing map in this table. A row cannot be set to active until the ethernet interface ifIndex is set.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.2.11.1.49
adGenEthernetDslamFlowRev2NetworkIngressPolicer Indicate which policer to on network ingress traffic. A value of 0 means no policer is used on network ingress traffic. A non-zero value represents a row from the adGenEthernetDslamFlowRev2ProfilesTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.50
adGenEthernetDslamFlowRev2UpstreamDiscard Indicate that any packets matching the upstream criteria will be discarded.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.664.5.70.2.11.1.51
adGenEthernetDslamFlowRev2MaxAllowedMulticastBandwidth Specify the maximum downstream bandwidth(kbps) available for this flow. This value is only considered if multicast bandwidth is enabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.53
adGenEthernetDslamFlowRev2MaxAllowedMulticastBandwidthEnable When enabled joins for multicast streams by the subscriber are checked to make sure that the maximum multicast bandwidth will not be exceeded by the join.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.664.5.70.2.11.1.54
adGenEthernetDslamFlowRev2ProfileName This object is provided so that the user can describe a particular flow by any means desired. This is not related to policers in the adGenEthernetDslamFlowRev2ProfilesTable.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.11.1.55
adGenEthernetDslamFlowRev2MaxAllowedMcastGroupsEnable When enabled joins for multicast streams by the subscriber are checked to make sure that the maximum number of non-guarenteed multicast groups will not be exceeded by the join.	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.664.5.70.2.11.1.56
adGenEthernetDslamFlowRev2NetworkIngressDSCPList This object is a string used to specify the DSCP values that will be used to classify NetworkIngress traffic. The DSCP values can be specified using both list and range notation. For example, to specify DSCP values 27…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.11.1.57
adGenEthernetDslamFlowRev2CustomerIngressDSCPList This object is a string used to specify the DSCP values that will be used to classify CustomerIngress traffic. The DSCP values can be specified using both list and range notation. For example, to specify DSCP values 2…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.11.1.58
adGenEthernetDslamFlowRev2IgmpRouterIP The source IP address that the DSLAM places in IGMP messages destined for the subscriber. This value only applies when IGMP is in proxy mode.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.664.5.70.2.11.1.59
adGenEthernetDslamFlowRev2ActivationStatus Provides an indication of whether the flow is actually activated. If adGenEthernetDslamFlowRev2RowStatus is not active, this object will return notActivated. When rowStatus is successfully set to active, the flow begin…	Enumeration Enumerated Values: 1 notActivated 2 inProgress 3 active 4 error	.1.3.6.1.4.1.664.5.70.2.11.1.60
adGenEthernetDslamFlowRev2ARPProcessing Set the ARP processing mode.	Enumerationr/w Enumerated Values: 1 block 2 proxy 3 transparent	.1.3.6.1.4.1.664.5.70.2.11.1.61
adGenEthernetDslamFlowRev2PPPoEProcessing Set the PPPoE processing mode.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 notApplicable 4 transparent	.1.3.6.1.4.1.664.5.70.2.11.1.62
adGenEthernetDslamFlowRev2SubscriberIpRowCreateError Returns the reason for the last row create error on Subscriber Access Static IP Table.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.11.1.63
adGenEthernetDslamFlowRev2DhcpPPPoEVendorNumber Used to provision the IANA Enterprise Number. This Number is returned by the PPPoE intermediate agent and DHCPv4 relay agent in sub option 9.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.11.1.64
adGenEthernetDslamFlowRev2DhcpPPPoEVendorIdFormat Used to provision the format of the vendor ID string. This string is returned by the PPPoE intermediate agent and DHCPv4 relay agent in sub option 9. TR-101 states that the format of the vendor ID should be user definea…	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.664.5.70.2.11.1.65
adGenEthernetDslamFlowRev2EvcName Set the name of the EVC that this flow is connected to. When this object is set, other objects that relate to EVC parameters (e.g. network S-tag, MAC switching, etc.) will be changed to match the named EVC parameters.	OctetStringr/w Constraints: range: 1-50	.1.3.6.1.4.1.664.5.70.2.11.1.66
adGenEthernetDslamFlowRev2EvcRoot Indicates whether the mapped interface is connected to the EVC as a root or a leaf. Root interfaces may forward to leaves and other roots; leaf interfaces may only forard to roots. When enabled, the mapped interface i…	Enumerationr/w Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.664.5.70.2.11.1.67
adGenEthernetDslamFlowRev2Dhcpv6Mode Set the DHCPv6 processing mode: Authenticate(1)- Use DHCPv6 for subscriber authentication Block(2)- Discard DHCPv6 Transparent(3)- Ignore DHCPv6 Snoop(4)- Process DHCPv6 without performing authentication …	Enumerationr/w Enumerated Values: 1 authenticate 2 block 3 transparent 4 snoop 5 sameAsDhcpv4	.1.3.6.1.4.1.664.5.70.2.11.1.68
adGenEthernetDslamFlowRev2Dhcpv6RelayAgent Set the DHCPv6 Relay Agent Mode: enabled(1) - enable the relay agent disabled(2) - disable the relay agent sameAsDhcpv4(3) - use the same mode on DHCPv6 Relay Agent as what is provisioned on adGenEthernetDslamFlowOption…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 sameAsDhcpv4	.1.3.6.1.4.1.664.5.70.2.11.1.69
adGenEthernetDslamFlowRev2Dhcpv6RelayAgentTrusted Enable/disable DHCPv6 relay agent trusted mode.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.664.5.70.2.11.1.70
adGenEthernetDslamFlowRev2DhcpPPPoERemoteIdFormat Used to provision the format of the remote ID string. This string is returned by the DHCPv4 relay agent in option 82 or DHCPv6 relay agent in option 37 or in PPPoE Vendor Specific tag. TR-101 states that the format of t…	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.664.5.70.2.11.1.71
adGenEthernetDslamFlowRev2DownstreamQosMapProfile The attached QoS Map Profile from the adGenQosMapProfileProvisioningTable used to classify downstream traffic into egress queues. An empty string signifies that the default system cos-map will be used instead of a cust…	OctetStringr/w Constraints: range: 1-80	.1.3.6.1.4.1.664.5.70.2.11.1.72
adGenEthernetDslamFlowRev2Dhcpv6CurrMode View the current DHCPv6 processing mode: Authenticate(1)- Use DHCPv6 for subscriber authentication Block(2)- Discard DHCPv6 Transparent(3)- Ignore DHCPv6 Snoop(4)- Process DHCPv6 without performing authen…	Enumeration Enumerated Values: 1 authenticate 2 block 3 transparent 4 snoop	.1.3.6.1.4.1.664.5.70.2.11.1.73
adGenEthernetDslamFlowRev2MatchSourceMacList Contains a list of source MAC addresses and mask on which to match in the following format: Byte number(s) Description 1 Number of match source MAC address entries (N, 0 to M, …	OctetStringr/w	.1.3.6.1.4.1.664.5.70.2.11.1.74
adGenEthernetDslamFlowRev2MatchSourceMacLastErrorString Returns the reason for the last error when setting adGenEthernetDslamFlowMatchSourceMacList or adGenEthernetDslamFlowRev2MatchSourceLastErrorString.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.2.11.1.75
adGenEthernetDslamFlowRev2MatchNonIp Enables/disables matching non-IP customer ingress traffic. True - enables match non-IP. False - disables match non-IP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.664.5.70.2.11.1.76

This read-only table allows a lookup from the flow's name and the
flow's index.

adGenEthernetDslamFlowRev2NameLookupEntry row .1.3.6.1.4.1.664.5.70.2.12.1

An entry in the Profile provisioning table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowRev2NameLookupName

Column	Syntax	OID
adGenEthernetDslamFlowRev2NameLookupName Specifies the name of the flow.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.664.5.70.2.12.1.1
adGenEthernetDslamFlowRev2NameLookupIndex Specifies the index of the flow given the name.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.12.1.2

This table is a read only table that has one row per slot. It returns the
next available ethernet dslam flow index to be uses as the index for the
EthernetDslamFlow table.

adGenEthernetDslamFlowRev2IndexNextEntry row .1.3.6.1.4.1.664.5.70.2.13.1

An entry in the adGenEthernetDslamFlowRev2IndexNextTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetDslamFlowRev2IndexNext This variable returns the next available Ethernet Flow Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.13.1.1

This table is a read only table that has one row per slot. It returns the
queue information for a slot.

adGenEthernetDslamFlowQueueTableEntry row .1.3.6.1.4.1.664.5.70.2.14.1

An entry in the adGenEthernetDslamFlowQueueTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetDslamFlowHonorsSystemPbitCosMap Indicates whether a slot is currently honoring the system's P-bit to CoS mapping.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.664.5.70.2.14.1.1
adGenEthernetDslamFlowShaperQueuePriorityOrder Indicates for SNMP whether adGenEthernetDslamFlowShaperPrioritySet is represented with the left-most bit representing the highest priority queue or the right-most bit representing the highest priority queue. Example: r…	Enumeration Enumerated Values: 1 rightMostHighest 2 leftMostHighest	.1.3.6.1.4.1.664.5.70.2.14.1.2

This table is a read only table that has one row per slot. It returns the
scalar information for a slot.

adGenEthernetDslamFlowScalarTableEntry row .1.3.6.1.4.1.664.5.70.2.16.1

An entry in the adGenEthernetDslamFlowScalarTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetFlowMatchSourceMacMaxAddresses Indicates the maximum number of match source MAC addresses allowed.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.2.16.1.1

This table is for enabling/disabling DHCP and PPPoE debug from event log and has one row per slot.

adGenEthernetDslamFlowLoggingEntry row .1.3.6.1.4.1.664.5.70.2.17.1

An entry in the adGenEthernetDslamFlowLoggingTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetDslamFlowDhcpPppoeEventDebug Enables/disables extraneous DHCP and PPPoE debug from event log. 1 = Enabled 2 = Disabled	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.664.5.70.2.17.1.1