ADTRAN-DYNAMIC-COUNTERS-MIB Table View

Provides information about dynamic counter slot support.

adGenDCSlotEntry row .1.3.6.1.4.1.664.5.70.53.1.1.1

Provides information about dynamic counter slot support.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenDCSlotSupport Identifies the dynamic counter matching types supported by the slot. Each bit will be set if the matching type can be used in adGenDCProfileTable. The values are: color - can use adGenDCProfileColorType…	Bits Enumerated Values: 0 color 1 pBit 2 sTag 3 destMacByType 4 destMac 5 destIpByType 6 destIp 7 srcMacByType 8 srcMac 9 srcIpByType 10 srcIp 11 ipAndMac 12 destAndSrc 13 tx 14 rx 15 queue 16 include 17 exclude	.1.3.6.1.4.1.664.5.70.53.1.1.1.1
adGenDCSlotMaxDCProfileIndex The maximum index value that can be used for the dynamic counter profile index on this slot.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.53.1.1.1.2
adGenDCSlotNextDCProfileIndex Identifies the next free index for a dynamic counter profile. Reports 0 if there is no available entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.53.1.1.1.3
adGenDCSlotMaxDCIndex The maximum index value that can be used for the dynamic counter index on this slot.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.53.1.1.1.4
adGenDCSlotNextDCIndex Identifies the next free index for a dynamic counter. Reports 0 if there is no available entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.53.1.1.1.5
adGenDCSlotClearAllDC This will always report idle. To clear all dynamic counter counts on the slot, write clearAll to this element.	Enumerationr/w Enumerated Values: 1 clearAll 2 idle	.1.3.6.1.4.1.664.5.70.53.1.1.1.6
adGenDCSlotLastError The details of the last error seen at the slot level, based on queries to this entry. The main use may be to report the error when there are no more entries available.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.53.1.1.1.7

Provides information about dynamic counter matching criteria.

adGenDCProfileEntry row .1.3.6.1.4.1.664.5.70.53.1.2.1

Provides information about dynamic counter matching criteria.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenDCProfileIndex

Column	Syntax	OID
adGenDCProfileIndex Identifies the index of the dynamic counter profile. The index will be from 1 to N, where N is the maximum number of dynamic counters supported by the module.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.53.1.2.1.1
adGenDCProfileRowStatus This object is used to create a new counter profile and delete an existing counter profile. To create, write createAndWait(5) or createAndGo(4) to this element. To delete, write destroy(6) to this element. The values …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.53.1.2.1.2
adGenDCProfileColorType Specify the color of the traffic to be matched in this profile. The default is noMatching, which means the color will not be used in this profile.	Enumerationr/w Enumerated Values: 1 noMatching 2 green 3 yellow 4 red	.1.3.6.1.4.1.664.5.70.53.1.2.1.3
adGenDCProfilePBitType Specify whether the P-Bit is being matched in this profile. The default is noMatching, which means the P-Bit will not be used in this profile. If pBit is set, then the matched P-Bit value is specified in adGenDCProfileP…	Enumerationr/w Enumerated Values: 1 noMatching 2 pBit	.1.3.6.1.4.1.664.5.70.53.1.2.1.4
adGenDCProfilePBit Specify a P-Bit value being matched in this profile when adGenDCProfilePBitType is set to pBit. This is unused if adGenDCProfilePBitType is set to anything else. This value defaults to 0.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.53.1.2.1.5
adGenDCProfileSTagType Specify whether the S-Tag is being matched in this profile. The default is noMatching, which means the S-Tag will not be used in this profile. If sTag is set, then the matching S-Tag value is specified in…	Enumerationr/w Enumerated Values: 1 noMatching 2 sTag 3 allSTags 4 noSTag	.1.3.6.1.4.1.664.5.70.53.1.2.1.6
adGenDCProfileSTag Specify an S-Tag value being matched in this profile when adGenDCProfileSTagType is set to sTag. This is unused if adGenDCProfileSTagType is set to anything else. This value defaults to 0.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.664.5.70.53.1.2.1.7
adGenDCProfileDestMacType Specify whether the destination MAC is being matched in this profile. The default is noMatching, which means the MAC will not be used in this profile. If mac is set, then the matched destination MAC value is specified …	Enumerationr/w Enumerated Values: 1 noMatching 2 mac 3 unicast 4 multicast 5 broadcast	.1.3.6.1.4.1.664.5.70.53.1.2.1.8
adGenDCProfileDestMacAddress Specify a destination MAC address being matched in this profile when adGenDCProfileDestMacType is set to mac. This is unused if adGenDCProfileDestMacType is set to anything else. This defaults to all-0's.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.664.5.70.53.1.2.1.9
adGenDCProfileDestIpType Specify whether the destination IP is being matched in this profile. The default is noMatching, which means the IP will not be used in this profile. If ip is set, then the matched destination IP value is specified in a…	Enumerationr/w Enumerated Values: 1 noMatching 2 ip 3 unicast 4 multicast 5 any 6 none	.1.3.6.1.4.1.664.5.70.53.1.2.1.10
adGenDCProfileDestIpAddress Specify a destination IP address being matched in this profile when adGenDCProfileDestIpType is set to ip. This is unused if adGenDCProfileDestIpType is set to anything else. This defaults to all-0's.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.664.5.70.53.1.2.1.11
adGenDCProfileSrcMacType Specify whether the source MAC is being matched in this profile. The default is noMatching, which means the MAC will not be used in this profile. If mac is set, then the matched source MAC value is specified in adGenDC…	Enumerationr/w Enumerated Values: 1 noMatching 2 mac	.1.3.6.1.4.1.664.5.70.53.1.2.1.12
adGenDCProfileSrcMacAddress Specify a source MAC address being matched in this profile when adGenDCProfileSrcMacType is set to mac. This is unused if adGenDCProfileSrcMacType is set to anything else. This defaults to all-0's.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.664.5.70.53.1.2.1.13
adGenDCProfileSrcIpType Specify whether the source IP is being matched in this profile. The default is noMatching, which means the IP will not be used in this profile. If ip is set, then the matched source IP value is specified in adGenDCProf…	Enumerationr/w Enumerated Values: 1 noMatching 2 ip 3 any 4 none	.1.3.6.1.4.1.664.5.70.53.1.2.1.14
adGenDCProfileSrcIpAddress Specify a source IP address being matched in this profile when adGenDCProfileSrcIpType is set to ip. This is unused if adGenDCProfileSrcIpType is set to anything else. This defaults to all-0's.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.664.5.70.53.1.2.1.15
adGenDCProfileLastError The details of the last error seen for a profile, based on queries to this entry.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.53.1.2.1.16
adGenDCProfileEgressQueueType Specify whether the Egress queue is being matched in this profile. If egressQueue is set, then the matching egress Queue value is specified in adGenDCProfileEgressQueue.	Enumerationr/w Enumerated Values: 1 noMatching 2 egressQueue	.1.3.6.1.4.1.664.5.70.53.1.2.1.17
adGenDCProfileEgressQueue Egress queue number.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.53.1.2.1.18
adGenDCProfileCtagVlanType Specify whether the C-Tag is being matched in this profile. If cTag is set, then the matching C-Tag value is specified in adGenDCProfileCtagVlan. If allCTags is set, then this will match al…	Enumerationr/w Enumerated Values: 1 noMatching 2 cTag 3 allCTags 4 noCTag	.1.3.6.1.4.1.664.5.70.53.1.2.1.19
adGenDCProfileCtagVlan Customer VLAN ID used to identify traffic	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.664.5.70.53.1.2.1.20
adGenDCProfileCtagPriType Specify whether the CTag is being matched in this profile. If cTagPri is set, then the matched CTag value is specified in adGenDCProfileCtagPri.	Enumerationr/w Enumerated Values: 1 noMatching 2 cTagPri	.1.3.6.1.4.1.664.5.70.53.1.2.1.21
adGenDCProfileCtagPri Priority used by the C-Tag on traffic meeting the match criteria.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.664.5.70.53.1.2.1.22
adGenDCProfileEvcMap Name of the EVC map. If null string is set, matching is disabled. Null string will be the default.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.53.1.2.1.23
adGenDCProfileDiscardReason Configures the dynamic counter to count packets that have been dropped due to one of the enumerated drop criteria. Discard reason 'none(11)' means that all packets that are NOT dropped are counted.	Enumerationr/w Enumerated Values: 1 noMatching 2 any 3 stagMatchFailed 4 egressRecDrop 5 forwardingFailed 6 fullQueue 7 invalidQueueDrop 8 lagNotValid 9 multicastBufferFull 10 macsaMatchFailed 11 none	.1.3.6.1.4.1.664.5.70.53.1.2.1.24

Provides information about dynamic counter configuration.
This tables connects a profile and an interface into a
dynamic counter entry.

adGenDCConfigEntry row .1.3.6.1.4.1.664.5.70.53.1.3.1

Provides information about dynamic counter configuration.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenDCConfigIndex

Column	Syntax	OID
adGenDCConfigIndex The index of the dynamic counter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.53.1.3.1.1
adGenDCConfigRowStatus This element provides the administrative state. This object is used to create a new dynamic counter, delete an existing dynamic counter, and to enable/disable the dynamic counter. To create or delete, write createAnd…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.53.1.3.1.2
adGenDCConfigProfile The index of the adGenDCProfile that will be used.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.53.1.3.1.3
adGenDCConfigInterface The IfIndex of the interface that will be used.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.664.5.70.53.1.3.1.4
adGenDCConfigType The type of the statistics to be gathered, either tx, rx, or queue statistics. The statistics types are only supported if indicated in adGenDCSlotSupport. If queue is specified, the queue number is indicated in adGenDCC…	Enumerationr/w Enumerated Values: 1 tx 2 rx 3 queue	.1.3.6.1.4.1.664.5.70.53.1.3.1.5
adGenDCConfigInterfaceQueue Indicates the queue number, if adGenDCConfigType is set to queue.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.664.5.70.53.1.3.1.6
adGenDCConfigInclude Indicates whether the match to the counter profile should be included in the counts or excluded from the counts. The default value is to include them in the counts. This setting is subject to the settings in adGenDCSlot…	Enumerationr/w Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.664.5.70.53.1.3.1.7
adGenDCConfigLastError The details of the last error seen for a dynamic counter, based on queries to this entry. This may include invalid values, reasons for rejecting configuration items, or reasons the counter cannot go running.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.664.5.70.53.1.3.1.8

Provides status about the dynamic counter table, including
counts that have been collected.

adGenDCStatusEntry row .1.3.6.1.4.1.664.5.70.53.1.4.1

Provides status about the dynamic counter table, including
counts that have been collected.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenDCConfigIndex

Column	Syntax	OID
adGenDCStatusRowStatus This object is used to report the operational status of the dynamic counters, either inService or notReady.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.664.5.70.53.1.4.1.1
adGenDCStatusOctets The total number of octets / bytes counted by this dynamic counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.664.5.70.53.1.4.1.2
adGenDCStatusPkts The total number of packets counted by this dynamic counter.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.664.5.70.53.1.4.1.3
adGenDCStatusAvgBitsPerSec The average number of bits per second counted on the dynamic counter during the last 5 minutes.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.664.5.70.53.1.4.1.4
adGenDCStatusClear This will always report idle. To clear the dynamic counter counts, write clear(1) to this element.	Enumerationr/w Enumerated Values: 1 clear 2 idle	.1.3.6.1.4.1.664.5.70.53.1.4.1.5