ADTRAN-AOS-SFP-MIB

        The MIB module is for AdtranOS SFP Status.
    

Imported Objects

adGenAOSCommon, adGenAOSConformanceADTRAN-AOS
adIdentityADTRAN-MIB
ifDescr, ifIndexIF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUPSNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32SNMPv2-SMI
DisplayString, TEXTUAL-CONVENTION, TruthValueSNMPv2-TC

Type Definitions (1)

Name Base Type Values/Constraints
AdSFPThresholdTypeTCEnumerationalarmThresholdHigh(1), alarmThresholdLow(2)

Objects

adGenAOSSfp .1.3.6.1.4.1.664.5.53.1.12
adGenAOSSfpConformance .1.3.6.1.4.1.664.5.53.99.30
adGenAOSSfpGroup .1.3.6.1.4.1.664.5.53.99.30.1
adGenAOSSfpCompliances .1.3.6.1.4.1.664.5.53.99.30.2
adGenAOSSfp .1.3.6.1.4.1.664.6.10000.53.1.12
adSFPTraps .1.3.6.1.4.1.664.6.10000.53.1.12.0
adGenAOSSFPAlarmThreshold .1.3.6.1.4.1.664.6.10000.53.1.12.1
adGenAOSSFPFailureReason .1.3.6.1.4.1.664.6.10000.53.1.12.2
adGenAoSSFPHwInfo .1.3.6.1.4.1.664.6.10000.53.1.12.3

Notifications/Traps

NameOIDDescription
adSfpAlarmRxPowerError.1.3.6.1.4.1.664.6.10000.53.1.12.0.1
indicates that Rx Power exceeded alarm threshold level
for an SFP. Information about the SFP and alarm threshold type are
contained with in this trap.
adSfpAlarmBiasCurrentResume.1.3.6.1.4.1.664.6.10000.53.1.12.0.10
indicates that Bias Current is with in the alarm thresholds 
range for an SFP. Information about the SFP is contained with in 
this trap.
adSfpTypeFailure.1.3.6.1.4.1.664.6.10000.53.1.12.0.11
indicates that SFP inserted is not supported by AdtranOS. 
Information about the SFP is contained with in this trap.
adSfpEntConfigChangeInsertion.1.3.6.1.4.1.664.6.10000.53.1.12.0.12
indicates that SFP is inserted into device. 
Information about the SFP  and the interface is contained in this trap.
adSfpEntConfigChangeRemoval.1.3.6.1.4.1.664.6.10000.53.1.12.0.13
indicates that SFP is removed from device. 
Information about the SFP  and the interface is contained in this trap.
adSfpAlarmRxPowerResume.1.3.6.1.4.1.664.6.10000.53.1.12.0.2
indicates that Rx Power is with in the alarm thresholds 
range for an SFP. Information about the SFP is contained with in 
this trap.
adSfpAlarmTxPowerError.1.3.6.1.4.1.664.6.10000.53.1.12.0.3
indicates that Tx Power exceeded alarm threshold level
for an SFP. Information about the SFP and alarm threshold type are
contained with in this trap.
adSfpAlarmTxPowerResume.1.3.6.1.4.1.664.6.10000.53.1.12.0.4
indicates that Tx Power is with in the alarm thresholds 
range for an SFP. Information about the SFP is contained with in 
this trap.
adSfpAlarmSupplyVoltageError.1.3.6.1.4.1.664.6.10000.53.1.12.0.5
indicates that Supply voltage exceeded alarm threshold level
for an SFP. Information about the SFP and alarm threshold type are
contained with in this trap.
adSfpAlarmSupplyVoltageResume.1.3.6.1.4.1.664.6.10000.53.1.12.0.6
indicates that supply voltage is with in the alarm thresholds 
range for an SFP. Information about the SFP is contained with in 
this trap.
adSfpAlarmTemperatureError.1.3.6.1.4.1.664.6.10000.53.1.12.0.7
indicates that Temperature exceeded alarm threshold level
for an SFP. Information about the SFP and alarm threshold type are
contained with in this trap.
adSfpAlarmTemperatureResume.1.3.6.1.4.1.664.6.10000.53.1.12.0.8
indicates that Temperature is with in the alarm thresholds 
range for an SFP. Information about the SFP is contained with in 
this trap.
adSfpAlarmBiasCurrentError.1.3.6.1.4.1.664.6.10000.53.1.12.0.9
indicates that Bias Current exceeded alarm threshold level
for an SFP. Information about the SFP and alarm threshold type are
contained with in this trap.