Standard view Table view

ADTRAN-AOS-POWER

        The MIB module for general configuration of power
monitoring options for devices with battery backup.

Source file: ADTRAN-AOS-POWER
Last revised: 10 Feb 2013, 00:00 UTC
Identity: adGenAOSPowerMonitor
Base OID: 1.3.6.1.4.1.664.5.53.7.1

Imported Objects

ADTRAN-AOS	adGenAOSConformance adGenAOSPower
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC	TEXTUAL-CONVENTION (no object page) TruthValue

Net-SNMP examples using the adtran MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'ADTRAN-AOS-POWER' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ADTRAN-AOS-POWER::adGenAOSPowerMonitor'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-AOS-POWER' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-AOS-POWER::adGenAOSPowerMonitor'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (16)

adGenAOSPowerTraps		`.1.3.6.1.4.1.664.5.53.7.0`
adGenAOSPowerMonitor		`.1.3.6.1.4.1.664.5.53.7.1`
adGenAOSPowerRollOverCtl		`.1.3.6.1.4.1.664.5.53.7.1.1`
adGenAOSPowerRolloverOnAC	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.664.5.53.7.1.1.1`
adGenAOSPwrRollOvrEvntSecSinceEpoch	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.664.5.53.7.1.1.2`
adGenAOSPowerEpsRps		`.1.3.6.1.4.1.664.5.53.7.1.2`
adGenAOSPowerEpsRpsTable		`.1.3.6.1.4.1.664.5.53.7.1.2.1`
adGenAOSPowerEpsRpsEntry	adGenAOSPowerEpsRpsInstanceId	`.1.3.6.1.4.1.664.5.53.7.1.2.1.1`
adGenAOSPowerEpsRpsInstanceId	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.664.5.53.7.1.2.1.1.1`
adGenAOSPowerEpsConnectionState	AdPowerConnectionStateTC	`.1.3.6.1.4.1.664.5.53.7.1.2.1.1.2`
adGenAOSPowerEpsDeliveryState	AdEpsPowerDeliveryStateTC	`.1.3.6.1.4.1.664.5.53.7.1.2.1.1.3`
adGenAOSPowerRpsConnectionState	AdPowerConnectionStateTC	`.1.3.6.1.4.1.664.5.53.7.1.2.1.1.4`
adGenAOSPowerRpsDeliveryState	AdRpsPowerDeliveryStateTC	`.1.3.6.1.4.1.664.5.53.7.1.2.1.1.5`
adGenAOSPowerConformance		`.1.3.6.1.4.1.664.5.53.99.11`
adGenAOSPowerGroups		`.1.3.6.1.4.1.664.5.53.99.11.1`
adGenAOSPowerCompliances		`.1.3.6.1.4.1.664.5.53.99.11.2`

Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

ADTRAN-AOS-POWERadtranselected
- ADTRAN-AOSadtran2 symbols
  - ADTRAN-MIBadtran2 symbols
    - SNMPv2-CONFrfcdefault fallback2 symbols
      - SNMPv2-SMIrfc3 symbols
    - SNMPv2-SMIrfcdefault fallbackshared3 symbols
    - SNMPv2-TCrfcdefault fallback2 symbols
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-SMIrfcdefault fallbackshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared4 symbols
- SNMPv2-TCrfcdefault fallbackshared2 symbols

Dependency-first compile order

Type Definitions (3)

AdEpsPowerDeliveryStateTC	Enumeration	`delivering(1)` `notDelivering(2)` `failed(3)` `unknown(4)`
AdPowerConnectionStateTC	Enumeration	`connected(1)` `notConnected(2)` `notApplicable(3)` `unknown(4)`
AdRpsPowerDeliveryStateTC	Enumeration	`failed(1)` `busy(2)` `delivering(3)` `available(4)` `unknown(5)`

Conformance Groups (5)

adGenAOSPowerNotificationGroup	adGenAOSPowerRollover Trap which may be used to enhance power event driven management of the Unit.	`.1.3.6.1.4.1.664.5.53.99.11.1.1`
adGenAOSPowerRollOverCtlGroup	adGenAOSPwrRollOvrEvntSecSinceEpoch adGenAOSPowerRolloverOnAC The Unit SNMP Config Group.	`.1.3.6.1.4.1.664.5.53.99.11.1.2`
adGenAOSEpsNotificationGroup	adGenAOSEpsConnectionChange adGenAOSEpsDeliveryChange Trap used to indicate state changes of EPS.	`.1.3.6.1.4.1.664.5.53.99.11.1.3`
adGenAOSRpsNotificationGroup	adGenAOSRpsConnectionChange adGenAOSRpsDeliveryChange Trap used to indicate state changes of RPS.	`.1.3.6.1.4.1.664.5.53.99.11.1.4`
adGenAOSEpsRpsConfigurationGroup	adGenAOSPowerEpsRpsInstanceId adGenAOSPowerRpsConnectionState adGenAOSPowerRpsDeliveryState adGenAOSPowerEpsConnectionState adGenAOSPowerEpsDeliveryState The Unit SNMP Config Group.	`.1.3.6.1.4.1.664.5.53.99.11.1.5`

Compliance Statements (1)

OID .1.3.6.1.4.1.664.5.53.99.11.2.1

The compliance statement for SNMP entities which implement
version 2 of the adGenAOSPower MIB. When this MIB is fully
implemented, then such an implementation can claim
full compliance.

Required groups

optional	adGenAOSPowerRollOverCtlGroup	A collection of objects providing read/write configuration information for the management of power rollovers.
optional	adGenAOSPowerNotificationGroup	This mandatory group is used for the management of power rollover notifications.
optional	adGenAOSEpsRpsConfigurationGroup	A collection of objects providing read-only configuration information for the management of EPS and RPS.
optional	adGenAOSEpsNotificationGroup	This mandatory group is used for the management of EPS notifications.
optional	adGenAOSRpsNotificationGroup	This mandatory group is used for the management of RPS notifications.

Notifications / Traps (5)

Name	OID	Description
adGenAOSPowerRollover adGenAOSPowerRolloverOnAC adGenAOSPwrRollOvrEvntSecSinceEpoch	`.1.3.6.1.4.1.664.5.53.7.0.1`	This trap indicates the unit has had a change in power source, either from AC to DC or back again. The SecSinceEpoch represents the time (seconds since epoch) that the rollover occured.
adGenAOSEpsConnectionChange adGenAOSPowerEpsRpsInstanceId adGenAOSPowerEpsConnectionState	`.1.3.6.1.4.1.664.5.53.7.0.2`	This trap indicates the unit has had a change in the EPS connection state.
adGenAOSEpsDeliveryChange adGenAOSPowerEpsRpsInstanceId adGenAOSPowerEpsDeliveryState	`.1.3.6.1.4.1.664.5.53.7.0.3`	This trap indicates the unit has had a change in the EPS delivery state.
adGenAOSRpsConnectionChange adGenAOSPowerEpsRpsInstanceId adGenAOSPowerRpsConnectionState	`.1.3.6.1.4.1.664.5.53.7.0.4`	This trap indicates the unit has had a change in the RPS connection state.
adGenAOSRpsDeliveryChange adGenAOSPowerEpsRpsInstanceId adGenAOSPowerRpsDeliveryState	`.1.3.6.1.4.1.664.5.53.7.0.5`	This trap indicates the unit has had a change in the RPS delivery state.