ADTRAN-AOS-3G Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
27
adGenAOS3GTable
table.1.3.6.1.4.1.664.5.53.6.2.1
·
1 row entry
·
16 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenAOS3GTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-AOS-3G' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-AOS-3G::adGenAOS3GTable'
The table contains 3G cellular statistical data for the cellular interface.
This is an entry into the 3G table.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Network Access ID is the User ID submitted by the 3G
Modem during Mobile IP authentication. For more information, refer to RFC 4282. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.1.1.1 |
||||||
|
This OID displays whether the shared secret for the home
agent has been set for Mobile IP authentication. |
Bits Enumerated Values:
|
.1.3.6.1.4.1.664.5.53.6.2.1.1.2 |
||||||
|
The Home Agent Security Parameter Index uniquely identifies a
security association for the home agent for use during Mobile IP authentication. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.664.5.53.6.2.1.1.3 |
||||||
|
This OID displays whether the shared secret for AAA
has been set for Mobile IP authentication. |
Bits Enumerated Values:
|
.1.3.6.1.4.1.664.5.53.6.2.1.1.4 |
||||||
|
The AAA Security Parameter Index uniquely identifies a
security association for AAA for use during Mobile IP authentication. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.664.5.53.6.2.1.1.5 |
||||||
|
This OID describes if a tunnel is setup from the
3G module's care of address to the home agent. A care of address is a temporary IP address for a mobile device. |
Bits Enumerated Values:
|
.1.3.6.1.4.1.664.5.53.6.2.1.1.6 |
||||||
|
The permanent home IP address for the 3G
module in the cellular network. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.664.5.53.6.2.1.1.7 |
||||||
|
The primary IP address of the 3G module's home agent.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.664.5.53.6.2.1.1.8 |
||||||
|
The secondary IP address of the 3G module's home agent.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.664.5.53.6.2.1.1.9 |
||||||
|
The Receive Signal Strength Indicator for the cellular
connection. This value is a measurement of signal strength. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.53.6.2.1.1.10 |
||||||
|
The Ec/Io for the cellular connection. This is the ratio of
received pilot energy to the total received energy. The value is similar to signal-to-noise ratio. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.1.1.11 |
||||||
|
The Pn Offset for the cellular connection. Base stations
assigned to a particular frequency carrier operate at the same center frequency. The PN offset is used to distinguish base stations from one another. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.53.6.2.1.1.12 |
||||||
|
The current Cellular Service Type for
the cellular connection. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.1.1.13 |
||||||
|
The current Cellular Service Type Preference for the cellular
connection. Cellular Service Type can be forced to 1xRTT mode or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode which chooses the best availabl… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.53.6.2.1.1.14 |
||||||
|
The current Connection State for the cellular connection.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.1.1.15 |
||||||
|
The Ec/Io for the cellular connection displayed in integer
form. This is the ratio of received pilot energy to the total received energy. The value is similar to signal-to-noise ratio. EC/IO values typically are represe… |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.53.6.2.1.1.16 |
.1.3.6.1.4.1.664.5.53.6.2.2
·
1 row entry
·
8 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenAOS3GHardwareDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-AOS-3G' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-AOS-3G::adGenAOS3GHardwareDataTable'
The table contains profile information for the 3G cellular interface.
This is an entry into the 3G hardware data table.
| Column | Syntax | OID |
|---|---|---|
|
The System Identification number is the identifier
for a cellular network in a certain area. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.664.5.53.6.2.2.1.1 |
|
The Network Identification number identifies a subset
of a particular SID corresponding to different networks. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.2.1.2 |
|
The PRL is a database of cell towers that the cellular modem
can roam on. This OID specifies the current version of that database that is programmed onto the cellular modem. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.664.5.53.6.2.2.1.3 |
|
The MDN is the 10 digit phone number assigned to
the 3G module. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.2.1.4 |
|
The Electronic Serial Number is is a unique
number that identifies the 3G module. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.2.1.5 |
|
The MSID is a 10 digit number that identifies
the 3G module in the network. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.2.1.6 |
|
The hardware version of the 3G modem.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.2.1.7 |
|
The firmware version of the 3G modem.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.664.5.53.6.2.2.1.8 |
.1.3.6.1.4.1.664.5.53.6.2.3
·
1 row entry
·
3 columns
Uses the adtran variant from
Command help
/opt/observium/mibs/adtran.
Walk adGenAOS3GThresholdDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-AOS-3G' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-AOS-3G::adGenAOS3GThresholdDataTable'
The table contains settings regarding whether the trap is enabled and threshold values for certain traps.
This is an entry into the 3G threshold data table.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This OID indicates whether traps
are enabled for the interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.53.6.2.3.1.1 |
||||
|
This is a value from (-200..200) that sets the threshold for
an RSSI trap to occur. When the RSSI is below this value, it will cause an RSSI alarm trap. When the RSSI rises above this value, it will cause an RSSI clea… |
Integer32r/w Constraints: range: -200-200 |
.1.3.6.1.4.1.664.5.53.6.2.3.1.2 |
||||
|
This is a value from (-200..200) that sets the threshold for
an ECIO trap to occur. When the ECIO is below this value, it will cause an ECIO alarm trap. When the ECIO rises above this value, it will cause an ECIO clea… |
Integer32r/w Constraints: range: -200-200 |
.1.3.6.1.4.1.664.5.53.6.2.3.1.3 |