ADSL-LINE-MIB Table View

This table includes common attributes describing
both ends of the line.  It is required for all ADSL
physical interfaces.  ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslLineEntry row .1.3.6.1.2.1.10.94.1.1.1.1

An entry in adslLineTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslLineCoding Specifies the ADSL coding type used on this line.	ADSL-TC-MIBAdslLineCodingType Type Values: 1 other 2 dmt 3 cap 4 qam	.1.3.6.1.2.1.10.94.1.1.1.1.1
adslLineType Defines the type of ADSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be other than noChannel(1). This object defines which channel …	Enumeration Enumerated Values: 1 noChannel 2 fastOnly 3 interleavedOnly 4 fastOrInterleaved 5 fastAndInterleaved	.1.3.6.1.2.1.10.94.1.1.1.1.2
adslLineSpecific OID instance in vendor-specific MIB. The Instance may be used to determine shelf/slot/port of the ATUC interface in a DSLAM.	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.2.1.10.94.1.1.1.1.3
adslLineConfProfile The value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and channels if applicable. For `dynamic' mode, in t…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.2.1.10.94.1.1.1.1.4
adslLineAlarmConfProfile The value of this object identifies the row in the ADSL Line Alarm Configuration Profile Table, (adslLineAlarmConfProfileTable), which applies to this ADSL line, and channels if applicable. For `dynamic' …	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.2.1.10.94.1.1.1.1.5

This table provides one row for each ATUC.
Each row contains the Physical Layer Parameters
table for that ATUC. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAtucPhysEntry row .1.3.6.1.2.1.10.94.1.1.2.1

An entry in the adslAtucPhysTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAtucInvSerialNumber The vendor specific string that identifies the vendor equipment.	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.10.94.1.1.2.1.1
adslAtucInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.1.3.6.1.2.1.10.94.1.1.2.1.2
adslAtucInvVersionNumber The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.1.3.6.1.2.1.10.94.1.1.2.1.3
adslAtucCurrSnrMgn Noise Margin as seen by this ATU with respect to its received signal in tenth dB.	tenth dBInteger32 Constraints: range: -640-640	.1.3.6.1.2.1.10.94.1.1.2.1.4
adslAtucCurrAtn Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU.	tenth dBUnsigned32 Constraints: range: 0-630	.1.3.6.1.2.1.10.94.1.1.2.1.5
adslAtucCurrStatus Indicates current state of the ATUC line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFr…	Bits Enumerated Values: 0 noDefect 1 lossOfFraming 2 lossOfSignal 3 lossOfPower 4 lossOfSignalQuality 5 lossOfLink 6 dataInitFailure 7 configInitFailure 8 protocolInitFailure 9 noPeerAtuPresent	.1.3.6.1.2.1.10.94.1.1.2.1.6
adslAtucCurrOutputPwr Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.	tenth dBmInteger32 Constraints: range: -310-310	.1.3.6.1.2.1.10.94.1.1.2.1.7
adslAtucCurrAttainableRate Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.2.1.8

This table provides one row for each ATUR
Each row contains the Physical Layer Parameters
table for that ATUR. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAturPhysEntry row .1.3.6.1.2.1.10.94.1.1.3.1

An entry in the adslAturPhysTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAturInvSerialNumber The vendor specific string that identifies the vendor equipment.	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.10.94.1.1.3.1.1
adslAturInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.1.3.6.1.2.1.10.94.1.1.3.1.2
adslAturInvVersionNumber The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.	OctetString Constraints: range: 0-16	.1.3.6.1.2.1.10.94.1.1.3.1.3
adslAturCurrSnrMgn Noise Margin as seen by this ATU with respect to its received signal in tenth dB.	tenth dBInteger32 Constraints: range: -640-640	.1.3.6.1.2.1.10.94.1.1.3.1.4
adslAturCurrAtn Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU.	tenth dBUnsigned32 Constraints: range: 0-630	.1.3.6.1.2.1.10.94.1.1.3.1.5
adslAturCurrStatus Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and init…	Bits Enumerated Values: 0 noDefect 1 lossOfFraming 2 lossOfSignal 3 lossOfPower 4 lossOfSignalQuality	.1.3.6.1.2.1.10.94.1.1.3.1.6
adslAturCurrOutputPwr Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.	tenth dBmInteger32 Constraints: range: -310-310	.1.3.6.1.2.1.10.94.1.1.3.1.7
adslAturCurrAttainableRate Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.3.1.8

This table provides one row for each ATUC channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAtucChanEntry row .1.3.6.1.2.1.10.94.1.1.4.1

An entry in the adslAtucChanTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAtucChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their plac…	milli-secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.4.1.1
adslAtucChanCurrTxRate Actual transmit rate on this channel.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.4.1.2
adslAtucChanPrevTxRate The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucThresh(*)RateDown or less than adslAtucThresh(*…	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.4.1.3
adslAtucChanCrcBlockLength Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.4.1.4

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAturChanEntry row .1.3.6.1.2.1.10.94.1.1.5.1

An entry in the adslAturChanTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAturChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their plac…	milli-secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.5.1.1
adslAturChanCurrTxRate Actual transmit rate on this channel.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.5.1.2
adslAturChanPrevTxRate The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh(*)RateDown or less than adslAturThresh(*)RateUp will no…	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.5.1.3
adslAturChanCrcBlockLength Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.5.1.4

This table provides one row for each ATUC.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAtucPerfDataEntry row .1.3.6.1.2.1.10.94.1.1.6.1

An entry in adslAtucPerfDataTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAtucPerfLofs Count of the number of Loss of Framing failures since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.6.1.1
adslAtucPerfLoss Count of the number of Loss of Signal failures since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.6.1.2
adslAtucPerfLols Count of the number of Loss of Link failures since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.6.1.3
adslAtucPerfLprs Count of the number of Loss of Power failures since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.6.1.4
adslAtucPerfESs Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.6.1.5
adslAtucPerfInits Count of the line initialization attempts since agent reset. Includes both successful and failed attempts.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.6.1.6
adslAtucPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.1.3.6.1.2.1.10.94.1.1.6.1.7
adslAtucPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAtucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not availab…	Integer32 Constraints: range: 0-96	.1.3.6.1.2.1.10.94.1.1.6.1.8
adslAtucPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.2.1.10.94.1.1.6.1.9
adslAtucPerfCurr15MinLofs Count of seconds in the current 15 minute interval when there was Loss of Framing.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.6.1.10
adslAtucPerfCurr15MinLoss Count of seconds in the current 15 minute interval when there was Loss of Signal.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.6.1.11
adslAtucPerfCurr15MinLols Count of seconds in the current 15 minute interval when there was Loss of Link.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.6.1.12
adslAtucPerfCurr15MinLprs Count of seconds in the current 15 minute interval when there was Loss of Power.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.6.1.13
adslAtucPerfCurr15MinESs Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.6.1.14
adslAtucPerfCurr15MinInits Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.6.1.15
adslAtucPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsUnsigned32 Constraints: range: 0-86399	.1.3.6.1.2.1.10.94.1.1.6.1.16
adslAtucPerfCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.17
adslAtucPerfCurr1DayLoss Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.18
adslAtucPerfCurr1DayLols Count of the number of seconds when there was Loss of Link during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.19
adslAtucPerfCurr1DayLprs Count of the number of seconds when there was Loss of Power during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.20
adslAtucPerfCurr1DayESs Count of Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or…	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.21
adslAtucPerfCurr1DayInits Count of the line initialization attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. Includes both successful and failed attempts.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.22
adslAtucPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: range: 0-86400	.1.3.6.1.2.1.10.94.1.1.6.1.23
adslAtucPerfPrev1DayLofs Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.24
adslAtucPerfPrev1DayLoss Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.25
adslAtucPerfPrev1DayLols Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.26
adslAtucPerfPrev1DayLprs Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.27
adslAtucPerfPrev1DayESs Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.28
adslAtucPerfPrev1DayInits Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.6.1.29

This table provides one row for each ATUR.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAturPerfDataEntry row .1.3.6.1.2.1.10.94.1.1.7.1

An entry in adslAturPerfDataTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAturPerfLofs Count of the number of Loss of Framing failures since agent reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.7.1.1
adslAturPerfLoss Count of the number of Loss of Signal failures since agent reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.7.1.2
adslAturPerfLprs Count of the number of Loss of Power failures since agent reset.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.7.1.3
adslAturPerfESs Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.7.1.4
adslAturPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.1.3.6.1.2.1.10.94.1.1.7.1.5
adslAturPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not availab…	Integer32 Constraints: range: 0-96	.1.3.6.1.2.1.10.94.1.1.7.1.6
adslAturPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.2.1.10.94.1.1.7.1.7
adslAturPerfCurr15MinLofs Count of seconds in the current 15 minute interval when there was Loss of Framing.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.7.1.8
adslAturPerfCurr15MinLoss Count of seconds in the current 15 minute interval when there was Loss of Signal.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.7.1.9
adslAturPerfCurr15MinLprs Count of seconds in the current 15 minute interval when there was Loss of Power.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.7.1.10
adslAturPerfCurr15MinESs Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsPerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.7.1.11
adslAturPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsUnsigned32 Constraints: range: 0-86399	.1.3.6.1.2.1.10.94.1.1.7.1.12
adslAturPerfCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAturPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.7.1.13
adslAturPerfCurr1DayLoss Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAturPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.7.1.14
adslAturPerfCurr1DayLprs Count of the number of seconds when there was Loss of Power during the current day as measured by adslAturPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.7.1.15
adslAturPerfCurr1DayESs Count of Errored Seconds during the current day as measured by adslAturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or…	secondsADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.7.1.16
adslAturPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: range: 0-86400	.1.3.6.1.2.1.10.94.1.1.7.1.17
adslAturPerfPrev1DayLofs Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.7.1.18
adslAturPerfPrev1DayLoss Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.7.1.19
adslAturPerfPrev1DayLprs Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.7.1.20
adslAturPerfPrev1DayESs Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.7.1.21

This table provides one row for each ATUC
performance data collection interval.
ADSL physical interfaces are
          
those ifEntries where ifType is equal to adsl(94).

adslAtucIntervalEntry row .1.3.6.1.2.1.10.94.1.1.8.1

An entry in the adslAtucIntervalTable.

Indexes

IF-MIBifIndex adslAtucIntervalNumber

Column	Syntax	OID
adslAtucIntervalNumber Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.	Integer32 Constraints: range: 1-96	.1.3.6.1.2.1.10.94.1.1.8.1.1
adslAtucIntervalLofs Count of seconds in the interval when there was Loss of Framing.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.8.1.2
adslAtucIntervalLoss Count of seconds in the interval when there was Loss of Signal.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.8.1.3
adslAtucIntervalLols Count of seconds in the interval when there was Loss of Link.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.8.1.4
adslAtucIntervalLprs Count of seconds in the interval when there was Loss of Power.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.8.1.5
adslAtucIntervalESs Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.8.1.6
adslAtucIntervalInits Count of the line initialization attempts during the interval. Includes both successful and failed attempts.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.8.1.7
adslAtucIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.94.1.1.8.1.8

This table provides one row for each ATUR
performance data collection interval.
ADSL physical interfaces are those
ifEntries where ifType is equal to adsl(94).

adslAturIntervalEntry row .1.3.6.1.2.1.10.94.1.1.9.1

An entry in the adslAturIntervalTable.

Indexes

IF-MIBifIndex adslAturIntervalNumber

Column	Syntax	OID
adslAturIntervalNumber Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.	Integer32 Constraints: range: 1-96	.1.3.6.1.2.1.10.94.1.1.9.1.1
adslAturIntervalLofs Count of seconds in the interval when there was Loss of Framing.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.9.1.2
adslAturIntervalLoss Count of seconds in the interval when there was Loss of Signal.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.9.1.3
adslAturIntervalLprs Count of seconds in the interval when there was Loss of Power.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.9.1.4
adslAturIntervalESs Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsPerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.9.1.5
adslAturIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.94.1.1.9.1.6

This table provides one row for each ATUC channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAtucChanPerfDataEntry row .1.3.6.1.2.1.10.94.1.1.10.1

An entry in adslAtucChanPerfDataTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAtucChanReceivedBlks Count of all encoded blocks received on this channel since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.10.1.1
adslAtucChanTransmittedBlks Count of all encoded blocks transmitted on this channel since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.10.1.2
adslAtucChanCorrectedBlks Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.10.1.3
adslAtucChanUncorrectBlks Count of all blocks received with uncorrectable errors since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.10.1.4
adslAtucChanPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.1.3.6.1.2.1.10.94.1.1.10.1.5
adslAtucChanPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not ava…	Integer32 Constraints: range: 0-96	.1.3.6.1.2.1.10.94.1.1.10.1.6
adslAtucChanPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.2.1.10.94.1.1.10.1.7
adslAtucChanPerfCurr15MinReceivedBlks Count of all encoded blocks received on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.10.1.8
adslAtucChanPerfCurr15MinTransmittedBlks Count of all encoded blocks transmitted on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.10.1.9
adslAtucChanPerfCurr15MinCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.10.1.10
adslAtucChanPerfCurr15MinUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.10.1.11
adslAtucChanPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsUnsigned32 Constraints: range: 0-86399	.1.3.6.1.2.1.10.94.1.1.10.1.12
adslAtucChanPerfCurr1DayReceivedBlks Count of all encoded blocks received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.10.1.13
adslAtucChanPerfCurr1DayTransmittedBlks Count of all encoded blocks transmitted on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.10.1.14
adslAtucChanPerfCurr1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.10.1.15
adslAtucChanPerfCurr1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.10.1.16
adslAtucChanPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: range: 0-86400	.1.3.6.1.2.1.10.94.1.1.10.1.17
adslAtucChanPerfPrev1DayReceivedBlks Count of all encoded blocks received on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.10.1.18
adslAtucChanPerfPrev1DayTransmittedBlks Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.10.1.19
adslAtucChanPerfPrev1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.10.1.20
adslAtucChanPerfPrev1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.10.1.21

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAturChanPerfDataEntry row .1.3.6.1.2.1.10.94.1.1.11.1

An entry in adslAturChanPerfDataTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAturChanReceivedBlks Count of all encoded blocks received on this channel since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.11.1.1
adslAturChanTransmittedBlks Count of all encoded blocks transmitted on this channel since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.11.1.2
adslAturChanCorrectedBlks Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.11.1.3
adslAturChanUncorrectBlks Count of all blocks received with uncorrectable errors since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.11.1.4
adslAturChanPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: range: 0-96	.1.3.6.1.2.1.10.94.1.1.11.1.5
adslAturChanPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not ava…	Integer32 Constraints: range: 0-96	.1.3.6.1.2.1.10.94.1.1.11.1.6
adslAturChanPerfCurr15MinTimeElapsed Total elapsed seconds in this interval. A full interval is 900 seconds.	secondsUnsigned32 Constraints: range: 0-899	.1.3.6.1.2.1.10.94.1.1.11.1.7
adslAturChanPerfCurr15MinReceivedBlks Count of all encoded blocks received on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.11.1.8
adslAturChanPerfCurr15MinTransmittedBlks Count of all encoded blocks transmitted on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.11.1.9
adslAturChanPerfCurr15MinCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.11.1.10
adslAturChanPerfCurr15MinUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.2.1.10.94.1.1.11.1.11
adslAturChanPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsUnsigned32 Constraints: range: 0-86399	.1.3.6.1.2.1.10.94.1.1.11.1.12
adslAturChanPerfCurr1DayReceivedBlks Count of all encoded blocks received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.11.1.13
adslAturChanPerfCurr1DayTransmittedBlks Count of all encoded blocks transmitted on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.11.1.14
adslAturChanPerfCurr1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.11.1.15
adslAturChanPerfCurr1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount	.1.3.6.1.2.1.10.94.1.1.11.1.16
adslAturChanPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: range: 0-86400	.1.3.6.1.2.1.10.94.1.1.11.1.17
adslAturChanPerfPrev1DayReceivedBlks Count of all encoded blocks received on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.11.1.18
adslAturChanPerfPrev1DayTransmittedBlks Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.11.1.19
adslAturChanPerfPrev1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.11.1.20
adslAturChanPerfPrev1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount	.1.3.6.1.2.1.10.94.1.1.11.1.21

This table provides one row for each ATUC channel's
performance data collection interval.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAtucChanIntervalEntry row .1.3.6.1.2.1.10.94.1.1.12.1

An entry in the adslAtucIntervalTable.

Indexes

IF-MIBifIndex adslAtucChanIntervalNumber

Column	Syntax	OID
adslAtucChanIntervalNumber Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.	Integer32 Constraints: range: 1-96	.1.3.6.1.2.1.10.94.1.1.12.1.1
adslAtucChanIntervalReceivedBlks Count of all encoded blocks received on this channel during this interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.12.1.2
adslAtucChanIntervalTransmittedBlks Count of all encoded blocks transmitted on this channel during this interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.12.1.3
adslAtucChanIntervalCorrectedBlks Count of all blocks received with errors that were corrected on this channel during this interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.12.1.4
adslAtucChanIntervalUncorrectBlks Count of all blocks received with uncorrectable errors on this channel during this interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.12.1.5
adslAtucChanIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.94.1.1.12.1.6

This table provides one row for each ATUR channel's
performance data collection interval.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAturChanIntervalEntry row .1.3.6.1.2.1.10.94.1.1.13.1

An entry in the adslAturIntervalTable.

Indexes

IF-MIBifIndex adslAturChanIntervalNumber

Column	Syntax	OID
adslAturChanIntervalNumber Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.	Integer32 Constraints: range: 1-96	.1.3.6.1.2.1.10.94.1.1.13.1.1
adslAturChanIntervalReceivedBlks Count of all encoded blocks received on this channel during this interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.13.1.2
adslAturChanIntervalTransmittedBlks Count of all encoded blocks transmitted on this channel during this interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.13.1.3
adslAturChanIntervalCorrectedBlks Count of all blocks received with errors that were corrected on this channel during this interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.13.1.4
adslAturChanIntervalUncorrectBlks Count of all blocks received with uncorrectable errors on this channel during this interval.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.2.1.10.94.1.1.13.1.5
adslAturChanIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.94.1.1.13.1.6

This table contains information on the ADSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the ADSL line.

adslLineConfProfileEntry row .1.3.6.1.2.1.10.94.1.1.14.1

Each entry consists of a list of parameters that
represents the configuration of an ADSL modem.

When `dynamic' profiles are implemented, a default
profile will always exist. This profile's name will
be set…

Indexes

adslLineConfProfileName

Column	Syntax	OID
adslLineConfProfileName This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always pro…	OctetString Constraints: range: 1-32	.1.3.6.1.2.1.10.94.1.1.14.1.1
adslAtucConfRateMode Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.	Enumerationr/w Enumerated Values: 1 fixed 2 adaptAtStartup 3 adaptAtRuntime	.1.3.6.1.2.1.10.94.1.1.14.1.2
adslAtucConfRateChanRatio Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and RADSL are supported. Distribute bandwidth on each channel in excess of the correspo…	%Integer32r/w Constraints: range: 0-100	.1.3.6.1.2.1.10.94.1.1.14.1.3
adslAtucConfTargetSnrMgn Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.4
adslAtucConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.5
adslAtucConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or s…	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.6
adslAtucConfDownshiftSnrMgn Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.7
adslAtucConfUpshiftSnrMgn Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will …	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.8
adslAtucConfMinUpshiftTime Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'.	secondsInteger32r/w Constraints: range: 0-16383	.1.3.6.1.2.1.10.94.1.1.14.1.9
adslAtucConfMinDownshiftTime Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL mode is not present, the value will be `0'.	secondsInteger32r/w Constraints: range: 0-16383	.1.3.6.1.2.1.10.94.1.1.14.1.10
adslAtucChanConfFastMinTxRate Configured Minimum Transmit rate for `Fast' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.14.1.11
adslAtucChanConfInterleaveMinTxRate Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for receive rates.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.14.1.12
adslAtucChanConfFastMaxTxRate Configured Maximum Transmit rate for `Fast' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for ATUC receive rates.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.14.1.13
adslAtucChanConfInterleaveMaxTxRate Configured Maximum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.14.1.14
adslAtucChanConfMaxInterleaveDelay Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver i…	milli-secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.94.1.1.14.1.15
adslAturConfRateMode Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.	Enumerationr/w Enumerated Values: 1 fixed 2 adaptAtStartup 3 adaptAtRuntime	.1.3.6.1.2.1.10.94.1.1.14.1.16
adslAturConfRateChanRatio Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and RADSL are supported. Distribute bandwidth on each channel in excess of the correspo…	%Integer32r/w Constraints: range: 0-100	.1.3.6.1.2.1.10.94.1.1.14.1.17
adslAturConfTargetSnrMgn Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.18
adslAturConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.19
adslAturConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or s…	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.20
adslAturConfDownshiftSnrMgn Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.21
adslAturConfUpshiftSnrMgn Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.2.1.10.94.1.1.14.1.22
adslAturConfMinUpshiftTime Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'.	secondsInteger32r/w Constraints: range: 0-16383	.1.3.6.1.2.1.10.94.1.1.14.1.23
adslAturConfMinDownshiftTime Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL mode is not present, the value will be `0'.	secondsInteger32r/w Constraints: range: 0-16383	.1.3.6.1.2.1.10.94.1.1.14.1.24
adslAturChanConfFastMinTxRate Configured Minimum Transmit rate for `Fast' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.14.1.25
adslAturChanConfInterleaveMinTxRate Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.14.1.26
adslAturChanConfFastMaxTxRate Configured Maximum Transmit rate for `Fast' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.14.1.27
adslAturChanConfInterleaveMaxTxRate Configured Maximum Transmit rate for `Interleave' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and see ATUC transmit rate for ATUR receive rates.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.14.1.28
adslAturChanConfMaxInterleaveDelay Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver i…	milli-secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.2.1.10.94.1.1.14.1.29
adslLineConfProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.94.1.1.14.1.30

This table contains information on the ADSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the modem for a physical line

adslLineAlarmConfProfileEntry row .1.3.6.1.2.1.10.94.1.1.15.1

Each entry consists of a list of parameters that
represents the configuration of an ADSL modem.

When `dynamic' profiles are implemented, a default
profile will always exist. This profile's name will
be set…

Indexes

adslLineAlarmConfProfileName

Column	Syntax	OID
adslLineAlarmConfProfileName This object is used by the line alarm configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will alwa…	OctetString Constraints: range: 1-32	.1.3.6.1.2.1.10.94.1.1.15.1.1
adslAtucThresh15MinLofs The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLofsThreshTrap. One trap will be se…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.2
adslAtucThresh15MinLoss The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLossThreshTrap. One trap will be s…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.3
adslAtucThresh15MinLols The number of Loss of Link Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLolsThreshTrap. One trap will be sen…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.4
adslAtucThresh15MinLprs The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLprsThreshTrap. One trap will be se…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.5
adslAtucThresh15MinESs The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfESsThreshTrap. One trap will be sent per …	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.6
adslAtucThreshFastRateUp Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.15.1.7
adslAtucThreshInterleaveRateUp Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0'…	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.15.1.8
adslAtucThreshFastRateDown Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the tr…	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.15.1.9
adslAtucThreshInterleaveRateDown Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable …	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.15.1.10
adslAtucInitFailureTrapEnable Enables and disables the InitFailureTrap. This object is defaulted disable(2).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.2.1.10.94.1.1.15.1.11
adslAturThresh15MinLofs The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLofsThreshTrap. One trap will be se…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.12
adslAturThresh15MinLoss The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLossThreshTrap. One trap will be s…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.13
adslAturThresh15MinLprs The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLprsThreshTrap. One trap will be se…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.14
adslAturThresh15MinESs The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfESsThreshTrap. One trap wi…	secondsInteger32r/w Constraints: range: 0-900	.1.3.6.1.2.1.10.94.1.1.15.1.15
adslAturThreshFastRateUp Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the tra…	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.15.1.16
adslAturThreshInterleaveRateUp Applies to `Interleave' channels only. configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable t…	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.15.1.17
adslAturThreshFastRateDown Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the tr…	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.15.1.18
adslAturThreshInterleaveRateDown Applies to `Interleave' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable …	bpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.94.1.1.15.1.19
adslLineAlarmConfProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.94.1.1.15.1.20